Okay I rooted my GS2 i777 today with the MIUI ROM found on these forums, it got stuck on a boot loop so I turned the phone off, then back on, then reapplied the CWM Recovery tar via Odin, and now when I boot the phone it just sits at a black screen...
Any idea how to fix this? I can't find a way to get into recovery mode because I don't have that "home" button in the middle of my phone...
PLEASEEEE help!!!
You hold the volume buttons and the power button, why did you reapply cwm may I ask?
Sent from my GT-I9100 using XDA App
I'm new to this stuff and was following the directions provided to me by someone who claims they knew what they were doing..
Any idea how to get this issue fixed? (Phone is on, but screen is blank as if not on)
Flash back to stock via Odin using one of the packages in this thread
http://forum.xda-developers.com/showthread.php?t=1286432
Sent from my SAMSUNG-SGH-I777 using XDA App
A jig is REQUIRED for this?
No, the jig is not required. Just need to get into download mode any way you can.
Sent from my SAMSUNG-SGH-I777 using XDA App
I appreciate the help, I really had no business trying to do this in the first place. I'm going to try and do what that link showed, I'll report back with what happens
Success = ) Thank you for the help, Dayv. It's very much appreciated!
Just for future reference, once you flash the custom package including CWM, you don't need to flash CWM again (unless you go back to bare-bones stock). If you need to reflash, just go into recovery and flash a new ROM.
Ahh, I remember my first "OMG I bricked" moment... Don't worry, you eventually get used to it and sometimes when my phone bootloops after flashing stuff I don't even care lol.
Another lame thread title that offers no help for someone with the same issue who actually takes the time to do a search.
Related
so i tried to flash stock vibrant....and something went wrong..and now my phone screen just says Vibrant and Samsung (what comes up when you start the phone) and just stays stuck there..ive heard bricked phones are completely black, any advice on what this is and where and what to search for to fix?
I'd say try to reflash through odin
Sent from my SGH-T959 using XDA App
Did you have the voodoo lag fix installed before? This sounds like what happens to people who flash a new rom over that. Look for the fixes they use in the voodoo thread.
Sent from my SGH-T959 using XDA App
The following gets you back into download mode to re-flash ODIN.
Take out your battery, sim card, and micro sd. Let sit for 15 sec. Then plug in your usb cord into the phone and computer. Now hold both volume keys down. While holding volume keys put battery back in. Let go of the keys once you see the download screen.
Depending on what you did......you might have to flash the -Froyo that does not brick- (by eugene) and then flash the stock odin package. All can be found in the Vibrant Bible sticky at the top of the forum. Be sure and follow directions carefully for both. Good Luck!
Sent from my SGH-T959 using XDA App
thanks so much, im a noob so this might be kind of hard for me, i used rom mananger to flash, i have no idea how to use odin, ill have to learn
Its broke, throw it away.
or maybe u should read up.
Were you running the voodoo lagfix when you tried flashing back to stock? And when you say flashing back to stock, do you mean via odin?
btw, I'm moving this thread to the Q&A section.
Installed the DoW kernel over Bionix-v and wound up in a boot loop, unable to get into recovery, but I was able to get into download mode. Tried using ODIN to flash back to stock, but it won't boot past the 1st Vibrant splash screen.
The ONLY rom I've been able to boot is Eugene's JK2+2e Froyo ROM, but it's not recognizing both the internal and external storage (shows unavailable). I'm assuming this is due to ODINing with voodoo enabled, so I tried flashing one of SuperCurio's voodoo kernels on top, but that seemed to have no effect.
I've tried using Eugene's Froyo that doesnt brick and then downgrading to stock JFD, but it still refuses to boot, same as if I negated the Froyo step. I'm fairly lost as to what my next step should be besides randomly changing settings, but I dont want to get to a state where I can't enter download mode.
ANY help anyone can provide would be amazing and greatly appreciated, and I can of course provide any additional information that would be helpful.
Odin needs time. Odin is your solution.
Sent from my SGH-T959 using XDA App
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
torturedsoul802 said:
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
Click to expand...
Click to collapse
Sure. If it was me id download an older odin version. Just try it. Id also go back to stock.
Remember to back up a program to root.
I still use odin 1.3 myself. Works every single time.
Let me know.
Sent from my SGH-T959 using XDA App
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
torturedsoul802 said:
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
Click to expand...
Click to collapse
Keep trying. It will work eventually for no reason.
Sent from my SGH-T959 using XDA App
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
15 max
Sent from my SGH-T959 using XDA App
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
torturedsoul802 said:
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
Click to expand...
Click to collapse
No to repartition on my end. But u may want to ask about the ext4 going back to rfs. Ive always done it in cwm honestly.
Someone else with more expirience will have to answer that.
But I have never and read it doesnt need to be done.
Sent from my SGH-T959 using XDA App
Tried, still wont turn on on stock, just vibrant screen.
torturedsoul802 said:
Tried, still wont turn on on stock, just vibrant screen.
Click to expand...
Click to collapse
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
+1. If your phone boots at all it's in my experience 100% recoverable. I own a RIFF box as well so if you brick it dead then I can still fix it... . I'll be getting a video up on ODIN usage for Vibrant/i9000 owners tomorrow. Check out my Boot Logo video on my website for a little bit of ODIN usage to give you an idea. You just need to open ODIN. The put the phone in download mode and plug in via USB. Then select your PIT and PDA file and click start. Then you can reflash stock firmware. PM me as I offer this as a service as well.
Thanks for the reply. Usage of ODIN is not my problem, the problem is that flashing to JFD (whether I use Eugene's Froyo 1st or not) results in a failed boot. The phone shows the 1st Vibrant splash screen for ~2 sec and then shuts off. No process I have tried results in a successful stock boot.
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
torturedsoul802 said:
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Click to expand...
Click to collapse
Hey, thank you so much for posting this up. These are great finds. I'd be more inclined though, to just call Tmobile and get another phone. I'm really tired of messing with the phone. I don't have time to be messing with this anymore.
The fact that I can get into download mode may be good news, but it does nothing for me right now. With what we know about bricking and unbricking phones, I've thrown every trick I know at it already. I hope you get it fixed, but I"m not messing with it anymore.
drewdude007 said:
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
Click to expand...
Click to collapse
Yeah man, me too. I'm getting this thing exchanged. It's a paperweight right now. My phone is doing exactly the same thing.
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Size matters.
Hey, I haven't posted in here before, I've been a member for a while, just never had anything to contribute. So I got the whole soft brick problem. I spent countless hours trying to get into download mode. The size of the usb cable matters, I was using an LG Optimus cord, and my buddy tried his blackberry cord which had much more gerth, and BAM download mode everytime no problem. Maybe this might help some of you out there.
Also I would like to say, thank you for everyones hard work. I had to roll back to stock roms, and just got the Froyo.UVKA7 to work. I love it, it's quick, it's got color in the settings menu. I wanted to cry... Everyone that has ever had anything to do with the developement to make Android better. THANK YOU!
Absolutely,
I am having problems with the phone starting up and loading what I flashed.
I flashed JI5 Ji6, and Eugene's non bricking Froyo Rom
These 3 are the only ones I was able to find that is ODIN flashable
Why you ask?
I cannot get into Recovery, but I can get into Download mode. I can't get into any recovery at all. NOTHING. This is why ODIN seems to be my only option.
But regardless of any ROM i flash, my phone shuts off right after the Vibrant screen. No splash screen, no loading, no booting. .Nothing. It just shuts off.
I can't charge it either.
i get a Charging bootloop. HOurglass - battery shows up for a bit, then restarts over and over.
So in other words. it's ****ed.
Hope that explains it sufficiently. if you have any more questions or suggestions, Im open man, Im open.
Help me
connexion2005 said:
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Click to expand...
Click to collapse
Hello i have an sgs2 from At&t and i was trying to root but was unsuccesful and now i have this message on my screen when i turn it on " Frimware upgrade encountered an issue. Please select recovery mode in Kies & try again". I could use any advice or help. I have search and tried alot of things but no luck. Please thanks.
What method did u use to root?
Sent from my SAMSUNG-SGH-I777 using XDA App
And importantly did you attempt the recovery through kies?
Sent from my SAMSUNG-SGH-I777 using XDA App
i used the "how to easily root your sgs2" method using odin. I tried to use the recovery through kies but it asks for a code and it wont connect to my phone.
It sounds like your phone is still half functioning. Try booting into recovery,
With the phone off hold down both volume keys and power button until you see the first screen, then let go of the power button.
If it's stock recovery you'll be able to do a factory restore(wipe). If CWM choose wipe data factory reset.
After rebooting it might work.
Worst case you can put it back in download mode and try odin again.
Sent from my SAMSUNG-SGH-I777 using XDA App
If you can't get it into download mode you may have serious issues.
Might need to build a usb jig or buy one.
Contemplate a return.
If you tried everything, and I mean everything to get it into download mode, i.e. jig, "adb reboot", then neither can they. Can't see anything you did.
Sent from my SAMSUNG-SGH-I777 using XDA App
I just tried that but all i get is the firmware error screen. And i would try reflashing through odin but i dont know what to reflash the kernal that i was trying to root or something else??
and i have thought about returning it but i want to eventually root it so i would like to know what im doing wrong or how to fix it. thanks for all the help
???
lakid06 said:
and i have thought about returning it but i want to eventually root it so i would like to know what im doing wrong or how to fix it. thanks for all the help
Click to expand...
Click to collapse
You never did tell us what KIES has to do with ROOTING ?
I would definitely flash back to stock. Stock will never further mess it up. Not to mention there is the stock rom that's prerooted. By using that one you won't get a yellow triangle on boot. Nor will the counter go up from changing the kernel.
Sent from my SAMSUNG-SGH-I777 using XDA App
Can you get into download mode?
Sent from my SAMSUNG-SGH-I777 using XDA App
Misterjunky said:
You never did tell us what KIES has to do with ROOTING ?
Click to expand...
Click to collapse
It doesnt but i was trying to go back to stock and i tried to do it from kies.
gr8hairy1 said:
I would definitely flash back to stock. Stock will never further mess it up. Not to mention there is the stock rom that's prerooted. By using that one you won't get a yellow triangle on boot. Nor will the counter go up from changing the kernel.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Can you point in the direction of that prerooted stock rom, cuz i couldnt find it. thanks, i will try that once i find the right rom
gr8hairy1 said:
Can you get into download mode?
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Yes!!! thanks for all the help, i hope i can get it up and running and rooted
gr8hairy1 said:
It sounds like your phone is still half functioning. Try booting into recovery,
With the phone off hold down both volume keys and power button until you see the first screen, then let go of the power button.
If it's stock recovery you'll be able to do a factory restore(wipe). If CWM choose wipe data factory reset.
After rebooting it might work.
Worst case you can put it back in download mode and try odin again.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
If he downloaded an international rom then he can't use the stock recovery as the power button on the international roms aren't the select key. They have an actual hardware button to select. I found that out the hard way.
Sent from my SGH-I777 using Tapatalk
@stalked_r/t Good point, I forgot about that happening to some people.
http://forum.xda-developers.com/showthread.php?t=1286432
Here's the link you want.
Sent from my SAMSUNG-SGH-I777 using XDA App
stalked_r/t said:
If he downloaded an international rom then he can't use the stock recovery as the power button on the international roms aren't the select key. They have an actual hardware button to select. I found that out the hard way.
Sent from my SGH-I777 using Tapatalk[/QUOTE
That is probably true cuz i downloaded a 1900 or something odin file to get back to stock but it was not the right one as i now know it should have been I777.
Click to expand...
Click to collapse
At least you got download mode working. With that working there should be no issue about fixing your phone.
Just keep in mind depending on if "everything flashed from the international version you possibly will also need to flash the right modem.
I wouldn't worry about that until you got the phone up and working.
It's best to keep each step as simple as possible, especially for the first time you're trying it.
Sent from my SAMSUNG-SGH-I777 using XDA App
ok so i downloaded the stock rooted rom and im using odin 1.85 but it stops at factoryfs.img, any ideas??? thanks again for all the help
Not good. I wish I could offer more help. At least it didn't stop at flashing the bootloaders.
There's not too much you can do at this point. You can try waiting seeing if it changes.
You can hope if you do unplug it that you can get it back into download mode. Then try odin again. Though I'd make sure the checksum of the download matches up to make sure it downloaded properly.
No one wants to be the one to say unplug it in the middle of an odin procedure, but if no progress is being made after a reasonable amount of time, there's not much left to do.
Sent from my SAMSUNG-SGH-I777 using XDA App
I'm trying to access the CWM recovery mode, but after reboot, my phone goes into Android system recovery instead.
Any help?
Then you definately don't have CWM installed correctly. If I was you go back to basics and flash stock firmware with Odin, then flash kernel to match the firmware, kernel being CF-ROOT okay? Please press thanks if this helps
Sent from my GT-I9100 using xda premium
I was getting this as well... Cwm is installed it's just annoying. When you get to stock recovery hold home, power, and volume up and it should get you back to cwm. It is a very serious issue that gets very little discussion. Whatever you do don't wipe with stock. I did... Very long and tedious process to get back.
Sent from my GT-I9100 using xda premium
Maybe you lose your root, root your phone again
Sent from my GT-I9100 using XDA App
I have the same or similar problem, just trying to do a nandroid backup. CWM is definitely installed and no matter what I try it will only boot into sammy's 3e recovery.
This may help or point in the right direction. I found a YouTube vid about loading a modded version of the 3e without sig verification (can't post link, so search YouTube for 3e recovery mod) but it looks like that was for an AT&T model. I tried to do the same on my S2 but the recovery file is not in the same place, I did find a recovery file somewhere else in the system but when I replace that with the modded version it just reverts back to the original. Anyway, there must be something like this for standard international S2's anybody seen it ? if so please post the link.
But like ChongDroid says, it's a big problem with not much discussion.
SGS2
pda: XWKI4
Phone: XXKI1
CSC: XEUKH2
same problem...only works with volume up but is that really a problem?
only change volume up instead volume down?
Pretty much if you use ROM manager to get into stock recovery and you've selected an install or a nandroid backup. It'll boot into recovery, try to install something, fail and then your prompted to reboot your device.. At this point you can ONLY select reboot, I repeat DO NOT wipe or anything in this menu. Do the three finger salute (manual recovery entry) instead of rebooting and she should take a second.. Then you might see rebooting but don't worry.. Keep holding.
Eventually it'll boot into cwm and get right on that install or nandroid with out navigating the menus.
K so one more time ppl, from 3e don't reboot, three finger salute. It rhymes
Cwm is there right along with root... She just needs a little push
Sent from my GT-I9100 using xda premium
No joy with the three finger salute
Well, I tried the three finger salute, held it for about three minutes and that is a feat on its own, but no re-boot into CWM happened, it did re-boot but only into 3e again. with a message about loading multi csc.
I guess there are too many variables to this problem to get a definitive answer, what works for someone does not appear to work for another.
Thanks anyway.
tecsol said:
Well, I tried the three finger salute, held it for about three minutes and that is a feat on its own, but no re-boot into CWM happened, it did re-boot but only into 3e again. with a message about loading multi csc.
I guess there are too many variables to this problem to get a definitive answer, what works for someone does not appear to work for another.
Thanks anyway.
Click to expand...
Click to collapse
Same here, tried this but to no avail. Tried uninstalling and installing clockworkmod again, but still the problem.
Give up.
shakeyabooti said:
Then you definately don't have CWM installed correctly. If I was you go back to basics and flash stock firmware with Odin, then flash kernel to match the firmware, kernel being CF-ROOT okay? Please press thanks if this helps
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I've downloaded the stock firmware, is this easy to do? I'm new to all this
Hi Guys,
Last night for some reason my GT-19100T running CM9.1.0 wouldn't lock by pressing the power button, the button itself seems to be working. I can press the button down but nothing happens. I left it for the night and came into work this morning, I thought it might be a bug with the rom, i managed to boot into recovery via the "Rom Manager" app and was going to flash to CM10. My problem is now that i am in recovery, I can't select anything as the power button is not working. I can scroll through the recovery menu with the volume buttons but cant select anything, and now soon as the phone turns on after removing the battery, it goes straight to recovery mode and i cant get around it.
I have tried leaving the battery out for about 3 hours and same thing. I can boot into download mode, But at the moment that doesn't help me.
Any suggestions on what i can do? I'm not worried about warranty so i may pull the phone apart and clean it tonight. Thanks in advance.
Update:
After much playing around with the button i can get it work, it is very temperamental and requires to be pushed in the right way. Was able to flash with Touch recovery and am now updating to CM10 nightlies. Thanks all for your help on my first post.
SirBigBird said:
Hi Guys,
Last night for some reason my GT-19100T running CM9.1.0 wouldn't lock by pressing the power button, the button itself seems to be working. I can press the button down but nothing happens. I left it for the night and came into work this morning, I thought it might be a bug with the rom, i managed to boot into recovery via the "Rom Manager" app and was going to flash to CM10. My problem is now that i am in recovery, I can't select anything as the power button is not working. I can scroll through the recovery menu with the volume buttons but cant select anything, and now soon as the phone turns on after removing the battery, it goes straight to recovery mode and i cant get around it.
I have tried leaving the battery out for about 3 hours and same thing. I can boot into download mode, But at the moment that doesn't help me.
Any suggestions on what i can do? I'm not worried about warranty so i may pull the phone apart and clean it tonight. Thanks in advance.
Click to expand...
Click to collapse
Hi!
First, have you tried flashing a stock firmware? If that does not help, you can try cleaning your hardware.. it may be dusty or something.. be careful! I hope you get this sorted out.
Also, i hope my suggestion will help you out, cheers!!
Sent from my GT-I9100 using xda premium
First, have you tried flashing a stock firmware?
I am currently flashing back to xxlpq via odin and see if that changes anything. Will post back with results.
Thanks.
SirBigBird said:
First, have you tried flashing a stock firmware?
I am currently flashing back to xxlpq via odin and see if that changes anything. Will post back with results.
Thanks.
Click to expand...
Click to collapse
Okay, will wait for your feedback
Sent from my GT-I9100 using xda premium
Okay, Flashed back to stock ICS rom, Got a little bit further but still no go. It gets the "S" loading screen and stays there, Still cant do factory reset via Android Recovery as it also needs the power button to select. Someone suggested installing CWM touch recovery but i cant find a .tar version of "recovery-clockwork-touch-5.8.1.5-galaxys2" downloaded from CWM website. Any suggestions on how i can install this without using recovery? Thanks.
SirBigBird said:
Okay, Flashed back to stock ICS rom, Got a little bit further but still no go. It gets the "S" loading screen and stays there, Still cant do factory reset via Android Recovery as it also needs the power button to select. Someone suggested installing CWM touch recovery but i cant find a .tar version of "recovery-clockwork-touch-5.8.1.5-galaxys2" downloaded from CWM website. Any suggestions on how i can install this without using recovery? Thanks.
Click to expand...
Click to collapse
I guess you have to flash them with odin..
1. Flash a stock firmware to get you out of bootloop
2. Flash the latest siyah kernel cause it's a touch recovery via odin as well
Do you want me to post the links or will you find it yourself?
I hope this helps, cheers!
Sent from my GT-I9100 using xda premium