Why isn't both CPU set @ 1.5 GHz? - TouchPad General

1. So I overclocked the TP from 1.2 to 1.5GHz.. But when I check Govnah, only one of the cpu is set to 1.5.... Does any one have any idea if this is normal or a suggestion to repair this..
2. Where can I get touchplayer media player? Or if there is another media player out there worth getting...

Mr.Quipster said:
1. So I overclocked the TP from 1.2 to 1.5GHz.. But when I check Govnah, only one of the cpu is set to 1.5.... Does any one have any idea if this is normal or a suggestion to repair this..
2. Where can I get touchplayer media player? Or if there is another media player out there worth getting...
Click to expand...
Click to collapse
Ignore that. Govnah is just not reporting correctly.
Check Preware for video players, or the HP App Catalog.

You can search in Preware.

Mr.Quipster said:
1. So I overclocked the TP from 1.2 to 1.5GHz.. But when I check Govnah, only one of the cpu is set to 1.5.... Does any one have any idea if this is normal or a suggestion to repair this..
2. Where can I get touchplayer media player? Or if there is another media player out there worth getting...
Click to expand...
Click to collapse
From what I have seen in Govnah, You don't always see the second cpu at 1.5 because it only runs when needed. Usually you will see it at the low speed of 193.
If you run something in the background you might see it change.

reverendkjr said:
Ignore that. Govnah is just not reporting correctly.
Check Preware for video players, or the HP App Catalog.
Click to expand...
Click to collapse
Thank you very much guys. But I've already searched the Hp store and Preware. None of which had decent results.
what video player are you guys using?

Mr.Quipster said:
Thank you very much guys. But I've already searched the Hp store and Preware. None of which had decent results.
what video player are you guys using?
Click to expand...
Click to collapse
youll need to install the touchplayer feed for it to show. the instructions will be be in the touchplayer fora.
-- Sent from my TouchPad

Related

Working Netflix?

Anyone got the new Netflix app to work on their TP2?
Sent from my TP2 using XDA App
so far i have working audio in the app however no video =(
nasapunk88 said:
so far i have working audio in the app however no video =(
Click to expand...
Click to collapse
Same here, even with highlandsun's video codecs it seems we can't play the video.
rpierce99 said:
Same here, even with highlandsun's video codecs it seems we can't play the video.
Click to expand...
Click to collapse
Probably due to same issue with HQ Youtube videos huh?
How can I bypass the "This device is not supported by Netflix" that I get when clicking on a title on my Instant Queue, so I can see if it is working or if it just audio only. Is there a way to spoof the app into thinking I am on a supported phone? If so, please tell me how to do it. Thanks.
There is an apk that will not check for device compatiblity but yeah no video. For me it plays audio and then it kicks out back to the queue. I wish it worked. Anything we can do?
Can't tell anything without knowing what codec / format Netflix is using in this app. I'm sure they're using H.264, but if it's not H.264 Baseline Profile then our phone hardware can't decode it. And if it's larger than 640x360 resolution, our current codec can't handle it.
I don't have a Netflix account so I haven't tried to see what formats they're using.
The current codec we have is written in C++ with threads. I'd say that's at least a 10% performance hit right there; if it was written well, in straight C, it would probably have achieved the 800x480 that Qualcomm's original spec claimed.
Netflix released an updated app today with support for more devices. I get the main screen, then loading, then the playback screen and nothing .... black screen. Nerts.
Carld256 said:
Netflix released an updated app today with support for more devices. I get the main screen, then loading, then the playback screen and nothing .... black screen. Nerts.
Click to expand...
Click to collapse
I'm not sure what 'nerts' are, but the new video playback libs might be necessary... Anyone with those new libs given this new app a shot?
arrrghhh said:
I'm not sure what 'nerts' are, but the new video playback libs might be necessary... Anyone with those new libs given this new app a shot?
Click to expand...
Click to collapse
nerts = nuts = really mild profanity
I actually have the new libs installed already. I'm running a RHOD500 with the latest kernel, overclocked to 710 Mhz, in case that matters.
Carld256 said:
nerts = nuts = really mild profanity
I actually have the new libs installed already. I'm running a RHOD500 with the latest kernel, overclocked to 710 Mhz, in case that matters.
Click to expand...
Click to collapse
So HQ YouTube works?
Why not just say 'nuts'?
arrrghhh said:
So HQ YouTube works?
Why not just say 'nuts'?
Click to expand...
Click to collapse
HQ YouTube works more or less. There's a little stutter sometimes, and some HQ videos start and then stop after 5 or 10 seconds, and some others play just fine. Oh, and the libs fixed video playback of the mp4 movies I already had on my device.
Weird thing is, YouTube under WinMo refuses to play HQ videos at all.
Nerts is funnier.
Carld256 said:
HQ YouTube works more or less. There's a little stutter sometimes, and some HQ videos start and then stop after 5 or 10 seconds, and some others play just fine. Oh, and the libs fixed video playback of the mp4 movies I already had on my device.
Weird thing is, YouTube under WinMo refuses to play HQ videos at all.
Click to expand...
Click to collapse
IIRC, WinMo plays HQ YouToobs flawlessly.
Carld256 said:
Nerts is funnier.
Click to expand...
Click to collapse
If you say so, lol.
arrrghhh said:
IIRC, WinMo plays HQ YouToobs flawlessly.
Click to expand...
Click to collapse
It used to. Some time back YouTube changed something, and now HQ videos play without sound (I was thinking they didn't play at all). Supposedly you can fix this by changing your network to "media," but I don't have that option any more since I upgraded to 6.5.
Carld256 said:
It used to. Some time back YouTube changed something, and now HQ videos play without sound (I was thinking they didn't play at all). Supposedly you can fix this by changing your network to "media," but I don't have that option any more since I upgraded to 6.5.
Click to expand...
Click to collapse
I just rebooted to see. Worked fine for me, I'm on 6.5 - but I used Opera... I don't know if there's some app that I should be using, perhaps it wasn't truly HQ.
Either way, if it used to then there shouldn't be anything limiting the hardware. Seems hyc went thru all that pretty thoroughly tho.
arrrghhh said:
I just rebooted to see. Worked fine for me, I'm on 6.5 - but I used Opera... I don't know if there's some app that I should be using, perhaps it wasn't truly HQ.
Either way, if it used to then there shouldn't be anything limiting the hardware. Seems hyc went thru all that pretty thoroughly tho.
Click to expand...
Click to collapse
I'm using Dot's latest rom dated 04-23-11 and it does play HQ youtube flawlesly, unlike NRG's which for some reason have a little choppy sound while the video plays, or it could just be my old tilt2
arrrghhh said:
I just rebooted to see. Worked fine for me, I'm on 6.5 - but I used Opera... I don't know if there's some app that I should be using, perhaps it wasn't truly HQ.
Either way, if it used to then there shouldn't be anything limiting the hardware. Seems hyc went thru all that pretty thoroughly tho.
Click to expand...
Click to collapse
I was using the HTC YouTube app. I tried it on two different 6.5 TP2s and they both do the same thing, HQ video plays, but no sound.
And your right. I know the hardware is capable, just somewhere along the way something in the software got screwed up on YouTube's end or mine.
Anybody try changing the build.prop to HTC vision or desire z or any of the phones that works with Netflix that's how we have it working already in my section
Sent from my LG-P999 using XDA App
I don't think the new version checks to see what model you're running.
The new Netflix app has a LOT of compatibility issues.
They still can't get it working on most Huawei S7 ROMs, and that device can do 720p easily.

Video X10 MINI

Hello everyone!
It is urgent. I need a video player other than the Rock Player why he keeps crashing, the audio is delayed. That is, not to even see any videos. Do you have any other solution? Some other application? If so, please, post me the download that is not using the internet ANDROID.
Nagash1994 said:
Hello everyone!
It is urgent. I need a video player other than the Rock Player why he keeps crashing, the audio is delayed. That is, not to even see any videos. Do you have any other solution? Some other application? If so, please, post me the download that is not using the internet ANDROID.
Click to expand...
Click to collapse
ArcMedia, it's a nice option
Also MoboPlayer with ARM V6_VFP codec
Cheers D4.
Do you have download
Do you have download?
Nagash1994 said:
Do you have download?
Click to expand...
Click to collapse
Search on market, both are free
Moboplayer
Arc media I clicked on the MKV file and he then returned to the main screen. Mobo player loaded normally and ran, but ran with lag in the format MKV (High Definition). What do you recommend me? Use the 7 2.3.4 Cyanogen
Nagash1994 said:
Arc media I clicked on the MKV file and he then returned to the main screen. Mobo player loaded normally and ran, but ran with lag in the format MKV (High Definition). What do you recommend me? Use the 7 2.3.4 Cyanogen
Click to expand...
Click to collapse
Of course, if you try playing 720p movies will be slow, because our processor it's only 600Mhz, or what you have overclocking, and for playing 720p it's needed 1GHz +, so best resolution for see movies smooth -> 480p max
lol
thanks for the explanation. Just a question! Do you think that our processor could handle a day with a 1 Ghz modifcações that will arise? Why does our phone supports 720, but we do not have the necessary processor. What do you think?
Nagash1994 said:
thanks for the explanation. Just a question! Do you think that our processor could handle a day with a 1 Ghz modifcações that will arise? Why does our phone supports 720, but we do not have the necessary processor. What do you think?
Click to expand...
Click to collapse
You mean overclock it to 1GHz ? it will explode your device max handle its 825mhz, and only few people have reached it, best speed seems to be 691 MHz
EDIT: Instead of saying thanks, press thanks button
lol
then it means that the honeycomb will not come to our Xperia as they said?
Nagash1994 said:
then it means that the honeycomb will not come to our Xperia as they said?
Click to expand...
Click to collapse
Honeycomb, if someone got it ported, will be slow, and ugly
D4rKn3sSyS said:
Honeycomb, if someone got it ported, will be slow, and ugly
Click to expand...
Click to collapse
+1
??? Sent from my X10 Mini using XDA Premium App ???
Nagash1994 said:
then it means that the honeycomb will not come to our Xperia as they said?
Click to expand...
Click to collapse
Not for ARM v6 processors.
Why would you even want Honeycomb on our phone? Honeycomb is ment for tablets and most apps for it will likely well, be unusable.

[Resolved][Q]About that little thing called hardware video acceleration.

I understand due to the lack of driver source code that Hardware acceleration will not work on our tabs past 2.2(froyo). But I am currently running Calkulin+Clemsyn 1.5ghz Froyo Combo VERSION 6: http://forum.xda-developers.com/showthread.php?t=1024120 and I have tried at least 20 diff videos and diff formats using hardware codec and not one video played. I know you can use apps to play videos with software codecs but when you start going into 720p and 1080p videos the video slows way down. So is there something I'm missing? I thought the tegra 2 could handle 1080p decoding? If there is another ROM that can do HD decoding better please let me know cause video playback is what I use my tab the most for. Thanks for any help and sorry for the wall of txt lol.
Will punch the thanks button!!!
Edit: Ok after several trial and error's on trying pershoot's kernel I decided to go ahead and re-encode my videos using Freemake video converter. It works and the quality actually looks better! This program is free and it has Android presets for our tablets so that you get the best video quality at our resolution! Now I would still like to use pershoot's kernal but I can't find any froyo roms that has his/her's kernel already packed into the rom. If some one could please help me with finding one that would be super! Thanks soooo much!!!
stock rom works...
http://forum.xda-developers.com/showthread.php?t=884103
works ... i test 1080p
browse internet low....
chacaldecg said:
stock rom works...
http://forum.xda-developers.com/showthread.php?t=884103
works ... i test 1080p
browse internet low....
Click to expand...
Click to collapse
Hmmm....well I guess I'm gonna have to choose between video acceleration or a stable ROM? :/ lol is there a custom rom with hardware acceleration? Thanks so much for the answer
I used Calkulin's ROM along with whatever current kernel Pershoot had and I never had any issues with and HD videos. You might want to give one of Pershoot's kernels a shot.
sumdumdude said:
I used Calkulin's ROM along with whatever current kernel Pershoot had and I never had any issues with and HD videos. You might want to give one of Pershoot's kernels a shot.
Click to expand...
Click to collapse
Thanks I'll try that! also what player are you using? If its a stock player, could you post the apk? Thanks so much!
BLT24 said:
when you start going into 720p and 1080p videos the video slows way down.
Click to expand...
Click to collapse
Why not re-encode to a lower resolution? The GTab can't even play 720p without resizing, which is what's killing you.
1024x600 - that's the screen size. Re-encode your HD video to be under that. It will play like butter. And be considerably smaller.
schettj said:
Why not re-encode to a lower resolution? The GTab can't even play 720p without resizing, which is what's killing you.
1024x600 - that's the screen size. Re-encode your HD video to be under that. It will play like butter. And be considerably smaller.
Click to expand...
Click to collapse
Why would they say you can play up to 1080p video, if you really cant? lol Also does it matter if its 600x1024 or 1024x600? The reason I ask is because I see it different all the time lol And one more thing, What program would you suggest to re-encode? Thanks so much for everything!
Edit: Ok so I tried pershoot's newest kernel out and I love it! I get some video acceleration back and it also fixed some sound issues I was having. The only problem is that after I install the kernel it boot's up fine but if I reboot, it gets stuck in a boot loop. If I do a factory reset it will boot back up again. but if I reboot then it gets stuck in a boot loop again. So with that said I don't think this kernel is meant for this ROM. What is the best froyo ROM that includes pershoot's kernel? Thanks for everything!!!!

[Q] MP3 Playback - Bug!??

Hey guys
i have a Problem with the Playback from some mp3's.
So i open the file with the standard player, it say's: "This type of Audiofile can't be played"...
But if i open the Audiofile over the "Root Explorer", it will be played with this player.
What is it?
Any other App from the Store make exactly the same bug...
The exactly same file's was played on ICS without any failure... but Jelly Bean??
In hopes that the new firmware (1.14.401.18) will fix the problem, i had flash the Revolution HD 4.0 Rom but this is not the case...
What can i do?
It is not acceptable! Such problems were among the old Windows Mobile 6 times...
PS: The Custom Rom is NOT the Problem. I have this Bug since i unpacked the One x+...
I have no problem with music (FLAC or MP3) at all, so it must be a problem on your side (ROM, other installations, MP3 or anything)... Not a general HOX+ problem...
Yezariael said:
Not a general HOX+ problem...
Click to expand...
Click to collapse
Sure?
Look at the Changelog from the xxx.18 Firmware, if you're on the xxx.16 and get the official update...
"fix Problem's with mp3-Playback"...
cheater2 said:
Sure?
Look at the Changelog from the xxx.18 Firmware, if you're on the xxx.16 and get the official update...
"fix Problem's with mp3-Playback"...
Click to expand...
Click to collapse
According to your post I should have problems with .16 firmware, but I don't have any issues Sound quality is fine as well, bluetooth no problem and sound very well...
I am on .16 and now have just the update for .6 available... where can I see the changelog for updates?
Yezariael said:
...where can I see the changelog for updates?
Click to expand...
Click to collapse
You must download it and where you can choose to install or abort this Update, you see the little List of change's...
The one Point with the mp3's fix was the reason for me, to risk to flash an custom rom because i have only rooted it before.
I must correct me:
The MX Player, rather a Video Player, is able to play the MP3's. All now, without issues..
But not the "Beats" player from HTC, wich is perfectly integrated... Damn it!!
Can anybody help me??
Please
cheater2 said:
You must download it and where you can choose to install or abort this Update, you see the little List of change's...
The one Point with the mp3's fix was the reason for me, to risk to flash an custom rom because i have only rooted it before.
I must correct me:
The MX Player, rather a Video Player, is able to play the MP3's. All now, without issues..
But not the "Beats" player from HTC, wich is perfectly integrated... Damn it!!
(
Click to expand...
Click to collapse
Therefore I don't have this update available I have no changelog
I use PowerAmp, everything plays fine... And I have an equalizer which is not possible with standard player...
Yezariael said:
I use PowerAmp, everything plays fine... And I have an equalizer which is not possible with standard player...
Click to expand...
Click to collapse
Oh yeah, i love this guys.
Never use this app and say "oh, i don't have any problems with this, i don't know what you have..."
Sorry for that, but your answers here was the same as a spam email in my mailbox...
In your first post you said
cheater2 said:
Any other App from the Store make exactly the same bug...
Click to expand...
Click to collapse
So don't get me rude this way...
Yezariael said:
So don't get me rude this way...
Click to expand...
Click to collapse
You may be a nice guy, but i have nothing utility from your answer's. It's right?
So, my thread is full of answers and everbody think, cheater2 was helped now...
You know?
I hope, that the Revolution 5.0 fix it now...
i will be trying to flash it today
I have over 300 MP3 files and no problem playing them with the stock HTC player.
Many players will only work with standard bit rates and ID3 tags. If any are not using the proper standard it might fail to play.
The reason other players are working is most likely they are ignoring the bad data or will play nonstandard bit rates.
Dangerously said:
Many players will only work with standard bit rates and ID3 tags. If any are not using the proper standard it might fail to play.
The reason other players are working is most likely they are ignoring the bad data or will play nonstandard bit rates.
Click to expand...
Click to collapse
You may be right, these files have different bit rates... -> but why can i play since gingerbread all mp3's without any failure?
and now makes JB difference between the rates?
What goes wrong with my Stock-Player?
PS:
In hope that the Problem solve itself, i waiting for Revo 5.1 and a working download-server...
cheater2 said:
PS:
In hope that the Problem solve itself, i waiting for Revo 5.1 and a working download-server...
Click to expand...
Click to collapse
I have flashed since 2 days the revo 5.1 and it will be played all mp3's now.
There is a new Version of the Stock Player
Many thanks to the Deleoper's

Maximize HW Video Playback in BSPlayer!

wtf?
i have been reported for trolling?
damn are there only girleboys at this place?
go and suck some ****ing ****
no information here.
..
That worked great thanks! Has anyone a solution for the black bars that you get when you hook this thing up to your TV?!
Sent from my Nexus 10 using Tapatalk HD
My nexus 10 doesn't seem to like full blu ray rips, like the 30mbps+ ones. It loads the first couple of seconds and then freezes. Any ideas?
Sent from my SCH-I535 using Tapatalk 2
THANK YOU!! For the very first time, I see *smooth* video playback of a Blu-ray rip on the Nexus 10!
How much more battery does this cost?
I hope, Google or the video player developers can fix this more generally.
---------- Post added at 11:29 AM ---------- Previous post was at 11:07 AM ----------
Hmmm, after I tried 1300/1700, it does not work anymore, even with 1500/1700.
According to CPU spy, BS runs at 1700 all the time, but still I have those micro lags again.
Quit and restart of BS does not help...
---------- Post added at 11:39 AM ---------- Previous post was at 11:29 AM ----------
Smooth again after reboot of the tablet... With 1300/1700. Strange.
sidamos77 said:
THANK YOU!! For the very first time, I see *smooth* video playback of a Blu-ray rip on the Nexus 10!
[/COLOR]Hmmm, after I tried 1300/1700, it does not work anymore, even with 1500/1700.
[/COLOR]Smooth again after reboot of the tablet... With 1300/1700. Strange.
Click to expand...
Click to collapse
great that it worked!...for a while
the difference is huge i agree
300mhz more CPU power doesnt seems that much but it is and you can see it.
i think setting it to the performance governor also made some difference.
also you dont want the CPU clock to be all over the place as it was before (from 200-1000mhz)
there seems to be some problem with SuperSu when its ask for permissions all the time.
when that happends and you are in a movie you will get the lag back even if SetCPU has permision.
you need to change some settings in SuperSu.
i have not tried it yet but it should work
i will update the first post later..
sidamos77 said:
How much more battery does this cost?
Click to expand...
Click to collapse
dont know yet but it sure will cost
sidamos77 said:
[/COLOR]Hmmm, after I tried 1300/1700, it does not work anymore, even with 1500/1700.
Click to expand...
Click to collapse
no need to use 1700mhz
that will kill your battery and also higher the risk of thermal throttling for the CPU.
(the CPU clocks down when it gets to hot)
set it to 1300mhz max and 1200mhz min instead.
omgi0wn said:
My nexus 10 doesn't seem to like full blu ray rips, like the 30mbps+ ones. It loads the first couple of seconds and then freezes. Any ideas?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
to slow USB HD?
i am using Nexus Media Importer what are you using?
FYI, the Samsung manual on the Exynos 5 processor in our tablet gives a full list of its hardware decoding capabilities for video. According to the manual it only supports 4.2 profiles and not the much more common 4.1 profiles. It also does not support .mkv files, but not sure if that matters since MKV is just a container and not the codec. But this could be why it isnt using full GPU hardware decoding capabilities of many movies and instead uses so much CPU power:
1080p 60fps (capable of decoding and encoding MPEG-4/H.263/H.264
and decoding only MPEG-2/VC1/VP8)
Click to expand...
Click to collapse
H.264 1080p 60 fps decoding: BP @ L4.2, MP @ L4.2, HP @ L4.2
H.264 1080p 60 fps encoding: BP @ L4.2, MP @ L4.2, HP @ L4.2
H.263 D1 30 fps decoding: Profile 3, Annex-I/J/K/T/D/F (except OBMC) support
H.263 D1 30 fps encoding: Baseline Profile
MPEG-4 1080p 30 fps decoding: SP, ASP @ L5, Xvid support
MPEG-4 1080p 30 fps encoding: SP, ASP @ L5
VC-1 1080p 30 fps decoding only: SP @ ML, MP @ HL, AP @ L3
and WMV-9 conformant stream (except CP)
VP8 1080p 60fps decoding: Version0/1/2/3
MPEG-2 1080p 30 fps decoding only: MP @ HL and MPEG-1 support (except D-picture)
Click to expand...
Click to collapse
I tried this trick on Plex too to see if I could minimize the buffering that I've been plagued with. It seemed to help a good amount. There was still some pausing but it happened less often and was of MUCH MUCH MUCH shorter duration (like half a second to one second) and much less intrusive to the watching experience.
Thanks for the tip!
KestrelX said:
I tried this trick on Plex too to see if I could minimize the buffering!
Click to expand...
Click to collapse
great that it speeds up buffering...didnt know that!
whats is Plex ?
Home media server kind of thing. Run a plex server on a desktop, run the plex app on your tablet and watch your movies, etc. I think part of our buffering problem is a recent change in the setup of the hard drives storing our media files, which we are going to try fixing, but still, set CPU seemed to make things better.
Sent from my Nexus 10 using Tapatalk HD
EniGmA1987 said:
FYI, the Samsung manual on the Exynos 5 processor in our tablet gives a full list of its hardware decoding capabilities for video. According to the manual it only supports 4.2 profiles and not the much more common 4.1 profiles. It also does not support .mkv files, but not sure if that matters since MKV is just a container and not the codec. But this could be why it isnt using full GPU hardware decoding capabilities of many movies and instead uses so much CPU power:
Click to expand...
Click to collapse
If you read the H.264 wiki, it seems that Levels correspond to supported resolution and frame rate maximums. So all 4.1 encodings should be supported on a 4.2. The BP / MP / HP mean Baseline Profile / Main Profile / High Profile. All different types of encodings.
http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC#Levels
MKV is a wrapper. It may never be supported on the built in video player, but all 3rd party (MX Player/BS Player etc) can easily demux the core video data for hardware decoding.
:Rainbow The more you know....
pg_ice said:
300mhz more CPU power doesnt seems that much but it is and you can see it.
i think setting it to the performance governor also made some difference.
also you dont want the CPU clock to be all over the place as it was before (from 200-1000mhz)
there seems to be some problem with SuperSu when its ask for permissions all the time.
when that happends and you are in a movie you will get the lag back even if SetCPU has permision.
you need to change some settings in SuperSu.
i have not tried it yet but it should work
i will update the first post later..
Click to expand...
Click to collapse
Thanks again!
Had it on userspace gov. Trying performance now. Also, wouldn't it seem more logical (to eliminate switching altogether), to set it to 1300/1300?
---------- Post added at 06:47 PM ---------- Previous post was at 06:39 PM ----------
I would not change global SuperSU settings to "grant" instead of "ask".
I configured "grant" and "no notification" for SetCPU and for the ProfilesService instead.
BTW, 1300/1300 also works good for the TimeScape video.
I am really glad someone else finally saw the not-smoothness in video playback. Or maybe some N10 can play smooth without this trick...
Will you inform the BSplayer developers about this? Maybe they can now do something, so that SetCPU is not necessary?
Seems like it may be helping YouTube buffering as well. Need to do some more testing with that.
Sent from my Nexus 10 using Tapatalk HD
sidamos77 said:
wouldn't it seem more logical (to eliminate switching altogether), to set it to 1300/1300?
Click to expand...
Click to collapse
i have not tried but it should be the same performance
i was thinking its maybe better to have some space when the CPU works.
just try it and see if its the same
sidamos77 said:
[/COLOR]I would not change global SuperSU settings to "grant" instead of "ask".
I configured "grant" and "no notification" for SetCPU and for the ProfilesService instead.
Or maybe some N10 can play smooth without this trick...
Will you inform the BSplayer developers about this? Maybe they can now do something, so that SetCPU is not necessary?
Click to expand...
Click to collapse
lol i think they read this
once you have set your profile you dont need to bother with it..so no problem here if its not fixed in BSplayer.
maybe they can fix it but then you probably need root anyway.
i think all N10s perform the same so its no chance you can get this smooth playback with the default setting.
as i said..300mhz is alot for adding performance to an app
sidamos77 said:
I would not change global SuperSU settings to "grant" instead of "ask".
Click to expand...
Click to collapse
right
i have updated the first post
KestrelX said:
Seems like it may be helping YouTube buffering as well. Need to do some more testing with that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
i dont know what CPU speed youtube is using but it can be checked with CPUSpy
its easy to make one more profile just for youtube if you need it.

Categories

Resources