Beware of the cheap eBay cases. I've tried several styles and one has basically ruined the painted trim on one of our NTs. Ironically the cheaper one with the elastic straps causes the least amount (no) damage while the ones with the "leather" frame-type holder has rubbed off or damaged the trim on another of our NTs. The elastic straps also do a better job of holding the NT since the "leather" trim ones has begun to stretch and allow the tablet to slide around.
Could you post a pictures?
I got a Moko Folio case off amazon that did something similar. It put dyed black dots all over where the felt-ish backing touched the nook. My fix was to put a skinomi on so the dots would not get worse but I am still disappointed.
yea i bought one of those cheap cases on ebay for like 18 bucks. i am starting to see some leather stains on my NT... any ideas on how to get rid of them? i already tried rubbing alcohol which didn't work, my next idea is to use vinegar...
ShinnAsuka said:
yea i bought one of those cheap cases on ebay for like 18 bucks. i am starting to see some leather stains on my NT... any ideas on how to get rid of them? i already tried rubbing alcohol which didn't work, my next idea is to use vinegar...
Click to expand...
Click to collapse
I bought a cheap silicone sleeve and cheap neoprene soft case. I'm going to try them out tonight and update my thread afterwards as to how they work.
KOCTA said:
Could you post a pictures?
Click to expand...
Click to collapse
I'm hoping it's just the color from the cover but I tried to clean it off and it didn't work.
Sorry it took so long, but here are the pics - excuse the dirty screen - seems like the screen savers smear up more that the unprotected screen:
ShinnAsuka said:
yea i bought one of those cheap cases on ebay for like 18 bucks. i am starting to see some leather stains on my NT... any ideas on how to get rid of them? i already tried rubbing alcohol which didn't work, my next idea is to use vinegar...
Click to expand...
Click to collapse
You can try oxalic acid containing products ("Barkeeper's Friend") and if that doesn't work it's pretty permanent. It's stronger than vinegar but it's the same idea; it should be safe on plastics. This is assuming it IS a stain and not rubbed off (the above looks rubbed off).
CheapGuy said:
I'm hoping it's just the color from the cover but I tried to clean it off and it didn't work.
Sorry it took so long, but here are the pics - excuse the dirty screen - seems like the screen savers smear up more that the unprotected screen:
Click to expand...
Click to collapse
I bought the same case in those pics and took the same cornholing . I tried all kinds of stuff to clean it and stopped just short of acetone. Right now my nt has a Skinomi skin on it, but when that eventually gets scuffed up and removed, I'll try that barkeeper's friend suggestion.
Sent from my BNTV250 using xda premium
The same thing happened to me.
I bought cheap "leather" case from ebay. After I noticed this thread I checked my Nook and it has these marks
It is a first time a have such issues with cheap ebay cases.
It looks like it is a stain not a rubbing off of nook plastic.
Probably it is a black dye from fake suede used as liner migrated to the nook plastic.
Plastic used in Nook definitely is a factor.
I wish I noticed this thread before I used the case. I ordered new one from BN.
I would greatly appreciate if somebody shares a way to remove these marks.
try the speck fitfolio, picked mine up from amazon. works pretty good, doesn't cover the front and it has a soft suede backing so no problems with scuffs
Has anyone tried those types of cases that have fabric (rather leather/"suede") inner backing?
Let us know if they do come off. I have noticed some slight staining on mine and am probably going to buy a more fabric based case.
TBH it doesn't bother me too much since I mine is almost always in a case. I get nervous when it's not.
I got my case (actually, one of those things that make your tablet look like a book) from B&N for $19 on sale. It works perfectly and gets a lot of compliments. I wouldn't get those cheap eBay ones...
I was really close to buying one of the Moko until I saw that Snugg made a case for the Nook. I'm glad I did after seeing this thread. The Snugg case is great and hasn't stained my tablet.
http://www.amazon.com/Snugg-Quality...8YTY/ref=sr_1_1?ie=UTF8&qid=1330541401&sr=8-1
News flash: Cheap chinese knock offs causing damage. News at 11.
Judging from the pics it looks more like rub off then residue. But knowing they used the lowest grade materials I wouldn't it put the idea of cheap ink soaking into the rubber plastic of the NT case either. Good call on the bartenders friend. That stuff has saved me in the past. As has the Mr. Clean Magic Eraser.
I would not use goo gone though. I've had that crap destroy plastics in the past.
I do hope you guys are able to get your nooks looking good again. I know I love keeping mine in pristine condition and would be pretty upset if something bad happened to mar it's surfaces.
You're better off buying the covers from BN.
I didnt buy the cheap leather chinese case from ebay becuase it was cheap, I liked it cuz it had the ability to fold into a stand. The barnes cases dont have that, but I severely regret not having bought one now.
The Last Master said:
I didnt buy the cheap leather chinese case from ebay becuase it was cheap, I liked it cuz it had the ability to fold into a stand. The barnes cases dont have that, but I severely regret not having bought one now.
Click to expand...
Click to collapse
http://www.barnesandnoble.com/p/tasume-in-carbon/22193460
You should have searched a little more. At $40 and free shipping after a promo code, this was worth every penny.
Solar.Plexus said:
You should have searched a little more. At $40 and free shipping after a promo code, this was worth every penny.
Click to expand...
Click to collapse
I like it, but its bulky looking, I like cases that don't add bulk.
Ill probably get the black silicone case from B&N, since its the only one I like that covers up the scuffs left by the ****ty ebay case. Im willing to try drops of acetone with cotton swabs, worst case scenario, ill pull the thing apart, and paint the bezel.
The Last Master said:
I like it, but its bulky looking, I like cases that don't add bulk.
Ill probably get the black silicone case from B&N, since its the only one I like that covers up the scuffs left by the ****ty ebay case. Im willing to try drops of acetone with cotton swabs, worst case scenario, ill pull the thing apart, and paint the bezel.
Click to expand...
Click to collapse
It's not actually that bulky. The covers are really thin and are made of an almost rubber material. The flaps fold back and are held together by magnets inside.
It was a really good idea from Barnes and Noble if you ask me. Perfect for working out of my e-book textbooks during class.
Related
ok so i want a armor case, screen cover for the phone
and i only found this one so far
http://www.daydeal.com/product.php?productid=17676
has anyone got that? is it good?
anyone know of any others??
let me know, thanks - randy
http://gadgetmix.com/reviews/armor_case/armor_metal_case_htc_hearld_dopod_c800.htm
I bought it from boxwave
kdskamal said:
http://gadgetmix.com/reviews/armor_case/armor_metal_case_htc_hearld_dopod_c800.htm
I bought it from boxwave
Click to expand...
Click to collapse
thats for the herald not the wing... as silly as it soundsi use the lil mirror thingy time to time..
I have this one:
http://www.boxwave.com/products/armorcase/armor-case-t-mobile-wing_2710.htm
It is awesome, very sturdy and you can still use the phone's buttons. It has the proper cutout for the mirror and also opens in the correct direction to make the keyboard usable with the case still on (unlike some of the cheaper ones).
Build quality is tight and the neoprene liner holds the phone firmly in the case so it won't drop out. The case is light but adds a little bulk to the phone, it's still the slimmest option for pocket carry and could take a hard shot from a turnstyle or counter with no problem.
Definitely cheaper than a replacement lcd!
Hope that helps =)
erf i posted the worng link in my first post..
bugsy
the link i ppostedi n there now
http://www.daydeal.com/product.php?productid=17676
that
is it me or is that the same case...?
looks ALOT like it
and its a bit cheeper plus free shipping also
They do look similar but I can't tell if the cheaper one has a protective plexiglass window or just an opening...
invisibleSHIELD
I bought one of those invisibleSHIELD thingies yesterday for my Wing.
I have one for my iPod Tocuh and it hasn't gotten a single scratch on it!!!
http://www.invisibleshield.com/smartphone/t-mobile/wing.php
Here's a link to get half price invisible shields
http://www.zagg.com/showspecial
$12 for the wing full-body is a decent deal, I'm just not sure how it will stick to the rubberized case of the wing and it does not give any crush/crack protection.
Either way I'm probably gonna get a screen protector
the one on daydeal does have a screen cover i emailed and asked. lol
hahaha, you gotta ask these days
Give it a shot, it's probably made by the same factory
wouldn't the protective cover over the screen keep you from using the touchscreen?
bugsy714 said:
hahaha, you gotta ask these days
Give it a shot, it's probably made by the same factory
Click to expand...
Click to collapse
hell yea.. i mena from the pics they look 100% the same vent holes and everything then the odds 2 companys make the same thing are slim
Bakkendance said:
wouldn't the protective cover over the screen keep you from using the touchscreen?
Click to expand...
Click to collapse
yes thats why its a flip open case
for eazy access to the screen
in your logic a armor case would also prevent some one from opening the phone to the keyboard
same thing it flips open
So did it come yet? I'm curious to hear how the build quality/tightness of lockup etc. to see if I paid an extra $14 for a boxwave sticker =)
im having issues with my creditcard and inturn paypal also..
havnt resolved it yet so i am with out a case
with that said my friend got the plastic body case for the phone and it was pretty much feeling lol
i have this case, nice fit, the matte metal is pretty slippery and it has slipped out of my hands a couple of times. one time the case popped open when it hit the pavement. also, when you drop it, the case will get silver nicks all over it. it is pretty strong, but will deform a little when you drop it, you can kinda bend and reshape the case to good as new. case also dents if it lands squarely on a corner.
nyitalian718 said:
erf i posted the worng link in my first post..
bugsy
the link i ppostedi n there now
http://www.daydeal.com/product.php?productid=17676
that
is it me or is that the same case...?
looks ALOT like it
and its a bit cheeper plus free shipping also
Click to expand...
Click to collapse
Just a warning to those that are considering the Rocketfish leather case. The chemicals used to dye the fake leather interior eventually leach into the white plastic of the Flyer and appear to permanently stain it. I've tried as many chemicals as I dare to remove the now black color but no luck. I'm taking both back to Best Buy tomorrow to see what they will do. I believe Rocketfish is owned by Best Buy (house brand) so they need to take care of it either way. I'll post pics later. Anybody else notice stains on their Flyer's?
A small spot of gray yeah. Comes out with Windex or rubbing alcohol and a wash cloth.
kkinder said:
A small spot of gray yeah. Comes out with Windex or rubbing alcohol and a wash cloth.
Click to expand...
Click to collapse
No, it doesn't. That has been tried. This is not on the surface.
I have noticed these gray marks on my flyer as well, but I love this case so much I don't really care. I don't really plan to use it outside of the case anyway. It gives my flyer the feeling of a real book when I carry it, and it looks very nice. Plus I can still put it in my pocket with the case on.
It's not perfect by any means, but the best I have found. For 50 dollars I would expect better fit, but I haven't found anything that fits better, or looks as good, for less money.
I wonder if this might be better http://www.amazon.com/gp/aw/d/B0055EPO8O/ref=redir_mdp_mobile/183-0174799-8151867
I intend on getting a full body skin for my view and then maybe after that a leather case.
RotoRooter said:
No, it doesn't. That has been tried. This is not on the surface.
Click to expand...
Click to collapse
Heh. Worked for me. Try a litte more elbow grease.
so what did Best Buy do when you showed it to them? Mine is doing the same thing.
Posted this on another thread:
Flyer on the back of the upper and lower cover for white leather finish, this material is very easily absorbed by the color, any color dyed leather or cloth, heat or after a long period of friction, there is a chance to dye the color of paint in white leather surface, the proposed first enclosed flyer back film affixed after the fuselage using this holster in order to avoid problems arise.
Click to expand...
Click to collapse
translated from this page:
http://translate.google.com/translate?js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&sl=zh-CN&tl=en&u=http%3A%2F%2Fshopping.pchome.com.tw%2FDGAL1A-A56581557
So even if you get your flyer replaced, if the case uses dyes it's probably still going to stain.
Bestbuy took my Flyer back as a return and it showed signs of staining. Alcohol did help lessen the damage but it was still quite obvious.
Has anyone purchased this silicone case from Amazon?
http://www.amazon.com/iShoppingdeal...2?s=electronics&ie=UTF8&qid=1317307713&sr=1-2
I ordered one yesterday and I'm hoping it's better than the silicone case I got from China. It's ok but just a little loose. The picture of the case on Amazon looks different so I figured I'd give it a shot since the price was reasonable.
No, but thanks just ordered it. The targus portfolio case is nice for most of the time, but I'm looking for something for around the house.
It's already sold out.
I thought it might go out of stock after people realized it was on Amazon. As stated in my op - the one I ordered from China off ebay is a little to loose. The cutouts are great but I'm looking for something a little tighter.
I can't see the price since it's unavailable. How much did you guys buy it for? Was it better than Sikai's price of $17.00?
I'm not so sure on the design. Back looks kind of weird, Sikai has a grippy texture like micro-cobblestone. Also the Sikai case comes up around the trim of the screen farther than this one. This one looks like an iPad silicone case I bought a year ago that had this thin lip where the edges are and it would fall out extremely easily.
The Sikai case isn't loose at all, it might be based on when you bought it or what color but the clear one I bought is tight as a glove with literally no probability of falling out even holding it one handed. It's very well made.
Case is $10.95 and I have Amazon Prime so shipping was free for me. Maybe I should have phrased my comments regarding the Sikai case differently. I do like the texture of the Sikai case and how much of the TF it actually covers but when I go to pull it out of my bag the edge along the face moves way too easily. Granted it isn't loose to the point of it falling off on its own but it also shouldn't come out with a minor movement - only if I'm trying to remove it intentionally.
http://www.ishoppingdeals4you.com/i...froogle&utm_medium=organic&utm_source=froogle
Added by edit.
The good thing about this silicone case is it also fits the keyboard dock, given you're willing to do some cutting. So, I got 2 pieces, one covering the tablet and one covering the keyboard dock. I'll post a picture tomorrow as I'm too lazy now.
Iso, when you get it can you do a review side by side with the Sikai case and point out the differences and faults?
Wondering if anyone has a good hard case suggestion... The bezels on the device seem a little weak, and I would like to protect it. I do enjoy the rubbery grip the back has though.
Any cases exist that might be hard and cover the bezels, but provide a good hold?
Hee are some options.
http://www.amazon.com/mCover®-Built...E8M8/ref=sr_1_1?ie=UTF8&qid=1326996267&sr=8-1
http://www.amazon.com/Trident-Silic...3R0E/ref=sr_1_6?ie=UTF8&qid=1326996267&sr=8-6
http://www.amazon.com/s/ref=nb_sb_n...field-keywords=nook+color+hard+case&x=15&y=19
I have a JavoEdge cover in Chocolate Tweed which makes the Nook look like a book.
hwong96 said:
Hee are some options.
http://www.amazon.com/mCover®-Built...E8M8/ref=sr_1_1?ie=UTF8&qid=1326996267&sr=8-1
http://www.amazon.com/Trident-Silic...3R0E/ref=sr_1_6?ie=UTF8&qid=1326996267&sr=8-6
http://www.amazon.com/s/ref=nb_sb_n...field-keywords=nook+color+hard+case&x=15&y=19
I have a JavoEdge cover in Chocolate Tweed which makes the Nook look like a book.
Click to expand...
Click to collapse
I ordered a Trident case, I will share my results if its ever going to arrive >.<
I use the hard shell frame from B&N. It fits really nice, keeps the look and feel of the device. adds a bit of thickness, but you know it'll survive a drop or two! I also have a screen protector on so its like the whole thing is covered! My wife has a booklet style cover and although it keeps the screen guarded it doesn't help much when dropped, it's fallen out of it's case many times when dropped on the carpet!
VidGameKing said:
I use the hard shell frame from B&N. It fits really nice, keeps the look and feel of the device. adds a bit of thickness, but you know it'll survive a drop or two! I also have a screen protector on so its like the whole thing is covered! My wife has a booklet style cover and although it keeps the screen guarded it doesn't help much when dropped, it's fallen out of it's case many times when dropped on the carpet!
Click to expand...
Click to collapse
Do you happen to have a link for that case? I did a quick search, but couldn't seem to find it.
otterbox works great, not suprising since all their products are awesome
xPhoenix777 said:
Do you happen to have a link for that case? I did a quick search, but couldn't seem to find it.
Click to expand...
Click to collapse
Its on barnes and nobles site. It looked pretty nice
drew68 said:
Its on barnes and nobles site. It looked pretty nice
Click to expand...
Click to collapse
I did end up finding it. Thanks
I am tempted on the otter box too... They do make great gadget covers.
I've got the otterbox for my droid x2 but ordered the strident case for my tablet. I'll let you know when it shows up. I'm pretty excited for it though
Sent from my NT using tapatalk
Topic rez.
Does anyone have any suggestions for a case somewhere in the realm of the Trident Aegis or the Otterbox Commuter, since both seem to be discontinued, and increasingly scarce? Or will I be doing myself a favor in the long run by going ahead and ponying up $50+ for one of the last few specimens floating around on eBay?
https://www.speckproducts.com/fitfolio-for-nook-tablet.html
I got this Speck case a few months ago in black, and I love it. It has the hard plastic shell to cover the edges of the nook, and the front/back is a faux leather material that's really nice to hold. The inside of the cover is pretty soft, and won't damage the screen at all.
It isn't the most heavy-duty case, and it doesn't cover the little piece of plastic near the sd card bay, but it is a form-fitting case for the Nook that doesn't add a whole lot of mass.
Cheaper to buy on amazon, here:
http://www.amazon.com/Speck-Product...AT0Y/ref=sr_1_1?ie=UTF8&qid=1336761132&sr=8-1
Trident Aegis FTW
Ended up getting the Trident case from a seller on eBay. Been using it for a couple of days, and I'm absolutely enamored with it so far. Makes my NT feel more substantial, and has improved my thumb typing and my Shadowgun skills. Highly recommended.
I ordered an otterbox commuter from ebay, but ended up returning it cause there is no access to the sdcard without taking off the case. Ended up with a 10 case off of amazon. It is made for the color, but fits my tablet perfectly and has a built in stand, which is pretty useless unless you are actually reading books.
http://www.amazon.com/mCover®-Built...1?s=electronics&ie=UTF8&qid=1337218126&sr=1-1
Team-B CM7 Nook Tablet using Tapatalk Dark 2
pelican 1055cc is great
balrog558 said:
I ordered an otterbox commuter from ebay, but ended up returning it cause there is no access to the sdcard without taking off the case. Ended up with a 10 case off of amazon. It is made for the color, but fits my tablet perfectly and has a built in stand, which is pretty useless unless you are actually reading books.
http://www.amazon.com/mCover®-Built...1?s=electronics&ie=UTF8&qid=1337218126&sr=1-1
Team-B CM7 Nook Tablet using Tapatalk Dark 2
Click to expand...
Click to collapse
I have the Otterbox. I just cut the case to get access to the SD.
Keithn said:
I have the Otterbox. I just cut the case to get access to the SD.
Click to expand...
Click to collapse
At the risk of repeating what's been mentioned before, if you can score the Trident case it has an easy-access flap to the SD.
And it's awesome.
johnseeking said:
At the risk of repeating what's been mentioned before, if you can score the Trident case it has an easy-access flap to the SD.
And it's awesome.
Click to expand...
Click to collapse
I would have considered it but I already got the Otterbox and I've been happy with it (use one on my phone too). It was easy to cut the plastic back, smooth the edges, and slit the silicone and have easy access without negatively affecting handling of the device. If I for some reason need another case I'll look into it though
Hello
Have any of you tried the TRIDENT AEGIS case for the ATRIX 4G. It surely looks great and functional, but I'm not sure abut the build quality as it can be docked along with the phone. Please post your review and pictures
Sure!
Just ordered from their site, and look very promising, JUS THE WAY I WAS EXPECTING A CASE TO BE for the Atrix! (And let me tell you I own at least 6 cases each one 30+ f*** bucks)
Once I get it delivered, will upload a modest review and some pictures attached in HD dock and Lapdock, (´cause of course, it won´t fit car dock)
My primary case is an Active Case from Seidio (such a fantastic combo) along with its Holster Clip. However, taking my Atrix out of the case for car dock navigation or simply hd dock is a pain to the a-....
OK! I remember! (this mojitos won´t help that out... however, mmmmm!) The point of this case for me is to get it fit in the holster clip from seidio active without the case for sure, using trident´s.
Will let you know!
ok, let us know, i just felt in love with the nice "man solid appeal"of the case
Think it twice
Hey guys,
As you know I ordered this case some time ago, and just received it. And you know what? I´m not in the mood to make a review of it, at the second attempt to open the flap to engage the media/dock mode, one of the strings just broke up, the bottom one, so easy (and I´m a very careful person regarding these matters) without forcing it at all or aplying so much pressure.
So if you want to try for yourself, go for it BUT PLEASE, excercise the most delicate usage if don´t wanna go my way.
So sad...
trident aegis
First, this case is on sale at Amazon for $10 including shipping!!
I am impressed with the quality and feel. This origionally sold for around $35 and you get what you pay for. It comes with a screen protector (a dry one) also a covering for the camera lens. I have a plastic plug for the earphone jack I got off ebay for $1.
This is a hard polycarbonite case, not the soft flimsy type, and it is thin yet sturdy and feels and looks great. So far I love it.
If you place your thumb on the center back logo when opening, it opens easily.
If I find any problems or any disappointments I'll post here. But for $10 you can't go wrong.
I'm sorry to hear about your bad experince with the case but so glad you are telling about.
There seems to be mixed thoughts on the case. Decided to get the seidio surface as I only hear positive feedback on this.
CK
Yeah mine broke at the hinge after a couple of weeks too.
best case
I've had almost every case made for the Atrix. The Aegis is by far definitely my favorite because it is small, neat, nice materials, feels good, looks great. Yes the hinge is a bit delicate, but if you CAREFULLY open the case you can avoid breaking the hinge. And even if you break it you can still use the case depending on how bad it breaks. The case is made from a hard polycarbonite material, not a soft rubbery silicone which I got very tired of over time. These cases are on sale on Amazon for $10, down from the regular $30.....cheap. I bought 2 of them just in case. Comes with a dry screen protector and a cleaning micro fiber cloth. Also comes with a camera lens cover but that added fog to the picture when using the flash so I don't use that. This case put new life into my Atrix so I am happy for the time being. I bought silicon covers for the ports off Ebay for a few bucks to keep out dust. Anyway just my opinion on things.