Related
IF YOU HAVE ANY QUESTIONS WITH THIS ROM, YOU SHOULD GO HERE.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
warning:you have to re-partiton to new hboot
can be installed to partition that has 160mb+ system and 8mb+ cache(it uses about 152mb with gapps included)
Click to expand...
Click to collapse
md5:b221b65e8e818d35d7296a2c135d84a1
If your phone bricks or you cannot flash it because of errors, you should check md5 before post questions here
Click to expand...
Click to collapse
featured:
Gapps included
Multi-language support
My SD Card write speed in this ROM(10 class):14.0MB/s
in recovery:9.82MB/s
Click to expand...
Click to collapse
Working:
Data
Wifi(Tether seems not working)
Bluetooth
Rotation
Mic
Sound
Usb Mass storage
Gps
Scripts(like app2sd)
Trackball wake
Volume button wake
HWA
Camera
Click to expand...
Click to collapse
I need feedbacks....
I ported AOKP using Evervolv 3.0.0.(thanks to Evervolv team)
DOWNLOAD
changelog:
v3.1:fixed superuser issue
v3.0:updated OTAupdater
included S2E
updated to latest
v2.3:fixed OTA issues
v2.2:may fixed ota issues(try when next build is out)
v2.1:fixed Phone.apk issue
fixed Superuser.apk permission issue
updated OTAUpdater
v2.0:Almost everything
v1.5:updated to latest Evervolv
v1.4:updated to latest Evervolv
fixed superuser
v1.3:changed camera.apk
v1.2:changed superuser -> supersu
removed filemanager(has explorer)
graphic driver update
version 2.0 has so many errors so I will upload v1.2 first.(v2.0 cannot mount usb-storage. when try, settings stop.)
v1.1:Changed AOKP-specific
v1:initial release
Click to expand...
Click to collapse
I removed [alpha] and [dev] but It's still preview version(because, Evervolv JB AND CM10/AOKP is preview version)
Click to expand...
Click to collapse
Screenshots are attached.
This port is from hd2 forum, so all credits should go to evervolv&hd2 devs
As always, this is alpha version so you should not expect too much
do it at your own risk
reider123 said:
As always, this is alpha version so you should not expect too much
do it at your own risk
Click to expand...
Click to collapse
Which AOKP build number did you use for porting?
taodan said:
Which AOKP build number did you use for porting?
Click to expand...
Click to collapse
Edit:it says preview 5 version
Sent from my Nexus One using xda premium
Do you think runs smoother AOKP or CM10 ? there is a difference of about 40 mb as I see between the 2 version or am I wrong?
fegato said:
Do you think runs smoother AOKP or CM10 ? there is a difference of about 40 mb as I see between the 2 version or am I wrong?
Click to expand...
Click to collapse
you're right
seems AOKP is much faster than cm10
beside, can you test it? I AM using it, but mant people have their own phone-using-habits
reider123 said:
you're right
seems AOKP is much faster than cm10
beside, can you test it? I AM using it, but mant people have their own phone-using-habits
Click to expand...
Click to collapse
Yes I said that because I'am testing now and seems a bit faster to me too also in booting and Include NovaLauncher also. Nice surprise.
Oh and to get rid of the NavBar I set its height to 0, It's right? maybe it's intresting for someone else..
fegato said:
Yes I said that because I'am testing now and seems a bit faster to me too also in booting and Include NovaLauncher also. Nice surprise.
Oh and to get rid of the NavBar I set its height to 0, It's right? maybe it's intresting for someone else..
Click to expand...
Click to collapse
If you want to get rid of the Navigation bar, you must set its height AND height landscape
Is it possible to flash it with 4ext?
timmy93 said:
Is it possible to flash it with 4ext?
Click to expand...
Click to collapse
try it. but some recoveries cannot flash this ROM
timmy93 said:
Is it possible to flash it with 4ext?
Click to expand...
Click to collapse
worked for me without issues
Can I have one question
In the ics wifi not working for me
I must install wifix to male it on
So what about JB is it the same? ??
Because the wifi is not working for me
Sorry for my bad English
Sent from my Nexus One using xda premium
Do I have to use the partition you request to use or can I use texasics partition for ics
Sent from my Nexus One using xda app-developers app
adio201 said:
Do I have to use the partition you request to use or can I use texasics partition for ics
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
can be installed to partition that has 160mb+ system and 8mb+ cache(it uses about 152mb with gapps included)
---------- Post added at 04:57 PM ---------- Previous post was at 04:54 PM ----------
tariqso said:
Can I have one question
In the ics wifi not working for me
I must install wifix to male it on
So what about JB is it the same? ??
Because the wifi is not working for me
Sorry for my bad English
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
do you have the correct partition???do you do the correct wipe,can you say more information about your problem?
Trackball wake! w0w! Downloading now...
hi rayder123 good job man!:good:
---------- Post added at 05:00 PM ---------- Previous post was at 05:00 PM ----------
clustered said:
Trackball wake! w0w! Downloading now...
Click to expand...
Click to collapse
yeah!!!!it is amazing!
clustered said:
Trackball wake! w0w! Downloading now...
Click to expand...
Click to collapse
Sadly there's no option to disable trackball wake
I think most people don't want trackball wake as it's only for people having power button broken (wonder why there are som any nexus one with broken power button ?? mine is totally fine after 2 years of intense usage)...
in texas ice rom there's an option to desactivate it ... can it be added to AOKP (and CM10 along the way ... )
---------- Post added at 05:06 PM ---------- Previous post was at 05:04 PM ----------
reider123 said:
try it. but some recoveries cannot flash this ROM
Click to expand...
Click to collapse
I flashed with 4ext and everything went fine ...except that terminal emulator was crashing !
Could it be a flashing problem ? I'll try with 4ext again to confirm then with amon-ra (as you seem to recommand this recovery).
EDIT : even with Ra recovery terminal emulator is crashing ... anyone having the same problem ? or is it me ?
OK I install the from works faster and smoother then texasics jelly bean but I flash without the gapps and Google now fc when opening...anyone else had this problem
Sent from my Nexus One using xda app-developers app
I must say, this is a pretty impressive port. Is odd that Google Voice works on this and not Drew's as it is the same base. Any possibility of getting the stock keyboard back in there? I know you can download the one from the Play store, but its not as good and the included one is too cartoonish for my liking. Well done though!
reider123 said:
Edit:it says preview 5 version
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
Flashed the ROM. Kam-sa-ham-ni-da
Aargh... well, to start, I couldn't get CM10 past the boot animation. No worries, I was able to load MeanROM just fine. All apps are there, and loaded Gapps 4.1 as well - I even flashed the kernel. So I can boot and have normal phone operation, except for...
Although I do have internet access,
1) Play Store will not connect.
2) Gmail keeps crashing
3) And none of my Google accounts have an option to sync contacts.
Three strikes!
Can someone help me with any of the aforementioned problems?
finalewiz said:
Aargh... well, to start, I couldn't get CM10 past the boot animation. No worries, I was able to load MeanROM just fine. All apps are there, and loaded Gapps 4.1 as well - I even flashed the kernel. So I can boot and have normal phone operation, except for...
Although I do have internet access,
1) Play Store will not connect.
2) Gmail keeps crashing
3) And none of my Google accounts have an option to sync contacts.
Three strikes!
Can someone help me with any of the aforementioned problems?
Click to expand...
Click to collapse
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
finalewiz said:
Aargh... well, to start, I couldn't get CM10 past the boot animation. No worries, I was able to load MeanROM just fine. All apps are there, and loaded Gapps 4.1 as well - I even flashed the kernel. So I can boot and have normal phone operation, except for...
Although I do have internet access,
1) Play Store will not connect.
2) Gmail keeps crashing
3) And none of my Google accounts have an option to sync contacts.
Three strikes!
Can someone help me with any of the aforementioned problems?
Click to expand...
Click to collapse
yeah I'm having the same issue, except for I'm still using cm10 latest nightly. Can't seem to get google to sync at all. had the keyboard crash over and over again as well. also my home and recent buttons don't respond at all either. They vibrate when pressed but other than that nothing happens.
Kernal version 3.0.51 -geb1844c
android version 4.1.2
cm10 version 10-20121205 nightly jewel
currently downloading cm10.0.0 and giving that a try...
thanks in advance
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
thicklizard said:
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
So what version should i get for gapps... sorry probably newb question...and should i wipe anything to install it and what should i use to install it with. used team wins touch recovery last time to install both rom and gapps
cerius said:
yeah I'm having the same issue, except for I'm still using cm10 latest nightly. Can't seem to get google to sync at all. had the keyboard crash over and over again as well. also my home and recent buttons don't respond at all either. They vibrate when pressed but other than that nothing happens.
Kernal version 3.0.51 -geb1844c
android version 4.1.2
cm10 version 10-20121205 nightly jewel
currently downloading cm10.0.0 and giving that a try...
thanks in advance
---------- Post added at 12:51 AM ---------- Previous post was at 12:46 AM ----------
So what version should i get for gapps... sorry probably newb question...and should i wipe anything to install it and what should i use to install it with. used team wins touch recovery last time to install both rom and gapps
Click to expand...
Click to collapse
Which gapps did you use? You should use the ones linked on IRC or the 4.2 gapps and no wipe is needed although you can wipe dalvik cache if you want.
Edit I think the gapps you need are dated as 20121011 jb gapps
Edit 2 are you son? Because I believe the kernel should be 3.0.53
Sent from my EVO using Tapatalk 2
thicklizard said:
Which gapps did you use? You should use the ones linked on IRC or the 4.2 gapps and no wipe is needed although you can wipe dalvik cache if you want.
Edit I think the gapps you need are dated as 20121011 jb gapps
Edit 2 are you son? Because I believe the kernel should be 3.0.53
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
yeah I am s-on. and i have kernal 3.0.51 - geb1844c
would i use goomanager to flash the image from the rom? and if so wouldnt i use the latest nightly or the stable cm10.0.0?
cerius said:
yeah I am s-on. and i have kernal 3.0.51 - geb1844c
would i use goomanager to flash the image from the rom? and if so wouldnt i use the latest nightly or the stable cm10.0.0?
Click to expand...
Click to collapse
You would flash the bootimg of which ever one you flashed
Sent from my EVO using Tapatalk 2
thicklizard said:
You would flash the bootimg of which ever one you flashed
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
im going to retry the flash image gui with the rom i have used, cm10.0.0, and install the gapps you said to use. will post in a bit
---------- Post added at 02:16 AM ---------- Previous post was at 01:34 AM ----------
cerius said:
im going to retry the flash image gui with the rom i have used, cm10.0.0, and install the gapps you said to use. will post in a bit
Click to expand...
Click to collapse
install of the recent gapps seems to have gotten everything to work.. just my data connection now is super slow....any ideas ?
cerius said:
im going to retry the flash image gui with the rom i have used, cm10.0.0, and install the gapps you said to use. will post in a bit
---------- Post added at 02:16 AM ---------- Previous post was at 01:34 AM ----------
install of the recent gapps seems to have gotten everything to work.. just my data connection now is super slow....any ideas ?
Click to expand...
Click to collapse
Gapps shouldn't effect data so I really don't have anything but maybe turn in airplane mode for a minute then turn off airplane mode
Sent from my EVO using Tapatalk 2
thicklizard said:
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
what do you mean.. "baked in"? you mean JUST flash MeanRom, and no Gaaps? thanks
finalewiz said:
what do you mean.. "baked in"? you mean JUST flash MeanRom, and no Gaaps? thanks
Click to expand...
Click to collapse
Sense roms don't require flashing gapps only AOSP,AOKP,CM10,ect.
thicklizard said:
You shouldn't flash the gapps sense roms have them baked in try just wiping and reflash
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
bigdaddy619 said:
Sense roms don't require flashing gapps only AOSP,AOKP,CM10,ect.
Click to expand...
Click to collapse
Awesome - that did the job. I see you're using the same ROM as me - what is the process to overclock, or is the ROM already doing that
(donation on the way)
finalewiz said:
Awesome - that did the job. I see you're using the same ROM as me - what is the process to overclock, or is the ROM already doing that
(donation on the way)
Click to expand...
Click to collapse
MeanROM comes overclocked at 1.7 or there is a zip you can flash and overclock at 1.8
Sent from my MB855 using xda app-developers app
BTW got it working.. just a slow connection while WiFi tethering. Fixed that also.
Sent from my EVO using xda app-developers app
Hello,
Does Thethering work on for this ROM?, http://forum.xda-developers.com/showthread.php?t=2140902?? I tried turning on Wifi AP and nothing happens. Also, is there a way to disable wallpaper scrolling on Bozooka Launcher for this same ROM??
Thank you.
Update: since the ROM is based off of CM10, tethering will not work yet. Not sure if epinter's fix will work. Also, there is no option to disable wallpaper scrolling. You will need to use a different launcher.
Thanks.
epinter's overclock kernel
Just to answer more avatar ROM questions. Epinter's 1.3 ghz over clock kernel will work on this ROM. http://forum.xda-developers.com/showthread.php?t=2140902&page=18.
Make sure its the cm10 version and not the cm10.1. Normal installation, just flash through CWM.
It will generate more heat but its bearable.
Mojar7070 said:
Just to answer more avatar ROM questions. Epinter's 1.3 ghz over clock kernel will work on this ROM. http://forum.xda-developers.com/showthread.php?t=2140902&page=18.
Make sure its the cm10 version and not the cm10.1. Normal installation, just flash through CWM.
It will generate more heat but its bearable.
Click to expand...
Click to collapse
Here is the link to the kernel. All credit goes to epinter. Thank you sir.
http://goo.im/devs/epinter/kernel_oc1300-cm10-20121026_1456-epinter-olympus.zip
O hi, i"ll just leave it her3.
I'll use this thread .
I've flashed Avatar and enjoyed it very much,until the gapps update. Phone's been crashing constantly ,making it imposible to use and i had to restore back to CM7. Is there any way around ? A flashed with full wipe.
BoriDe said:
I'll use this thread .
I've flashed Avatar and enjoyed it very much,until the gapps update. Phone's been crashing constantly ,making it imposible to use and i had to restore back to CM7. Is there any way around ? A flashed with full wipe.
Click to expand...
Click to collapse
which gapps update did you use?? If you used the gapps from the 3.1.10 kernel version of AvatarRom, it may not work, not sure though. This thread for the Previous version of AvatorROM with the Gingerbread kernel using the 20121019 GApps.
I flashed the latest build,full clean wipe. Gapps were installed through rom update app (20121011).
I tryed reflashing the rom and trying again and although installation came through (i could sync with google acount) , no
google play icon is showing'only Gtalk.
---------- Post added at 02:04 PM ---------- Previous post was at 01:57 PM ----------
I used avatar-2.15b-0-20130614-UNOFFICIAL-olympus.zip build.
BoriDe said:
I flashed the latest build,full clean wipe. Gapps were installed through rom update app (20121011).
I tryed reflashing the rom and trying again and although installation came through (i could sync with google acount) , no
google play icon is showing'only Gtalk.
---------- Post added at 02:04 PM ---------- Previous post was at 01:57 PM ----------
I used avatar-2.15b-0-20130614-UNOFFICIAL-olympus.zip build.
Click to expand...
Click to collapse
Not sure then bro. Have you tried "fix permission" through your recovery?? I remember with the old build there were 2 Zip files, the zip files needed to be installed first, one after the other and then the Gapps. then wipe dalvik cache and/ (optional: cache partition) and reboot system.
Also, as it was mentioned before, the 3.1.10 Kernel in Latest Cm10.1 builds still has bugs. So if your concerned about a daily driver Rom you should probably stick with a CM7 based rom or at the Previous AvatarRom build. Sorry I couldn't help.
Tryed all that , no go. Its a very solid ROM ,but kinda useless without the Gapps. This is actually the only thing that didn't work. Otherwise a true daily driver candidate.
BoriDe said:
Tryed all that , no go. Its a very solid ROM ,but kinda useless without the Gapps. This is actually the only thing that didn't work. Otherwise a true daily driver candidate.
Click to expand...
Click to collapse
Have you guys tried the gapps from epinter? Latest gapps package should be 20130301
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Have you guys tried the gapps from epinter? Latest gapps package should be 20130301
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Isn't it advised to use only the Gapps that dev team supplyes with ROM?
BoriDe said:
Isn't it advised to use only the Gapps that dev team supplyes with ROM?
Click to expand...
Click to collapse
Not necessarily, if you have a rom with one android version, it's compatible with the gapps for that device and android version
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Not necessarily, if you have a rom with one android version, it's compatible with the gapps for that device and android version
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Well butter my ass and call me Sally,it worked. Flashed the ROM, flashed most recent GApps and it work just fine. Thanks.
BoriDe said:
Well butter my ass and call me Sally,it worked. Flashed the ROM, flashed most recent GApps and it work just fine. Thanks.
Click to expand...
Click to collapse
Lol no problem Sally
Sent from my MB860 using xda app-developers app
BoriDe said:
Well butter my ass and call me Sally,it worked. Flashed the ROM, flashed most recent GApps and it work just fine. Thanks.
Click to expand...
Click to collapse
Sweet deal. Learned something new as well.
Sent from my Nexus 7 using xda app-developers app
Has anyone had any luck getting Hangouts Voice or Video calls working on non-stock ROMs? I have tried two different ROMs now, CM11 and Liquid Smooth, and Hangouts crashes immediately after trying to initiate a voice or video call in either of them.
I've searched the forums high and low and haven't found anything to help me fix the problem.
Any help would really be appreciated!
Galaxy nexus cm10.2.1
catcher8587 said:
Has anyone had any luck getting Hangouts Voice or Video calls working on non-stock ROMs? I have tried two different ROMs now, CM11 and Liquid Smooth, and Hangouts crashes immediately after trying to initiate a voice or video call in either of them.
I've searched the forums high and low and haven't found anything to help me fix the problem.
Any help would really be appreciated!
Click to expand...
Click to collapse
I am having the same issue everything works but video calls had cm11 and it worked on there till an update. I'm going to look for older version to see of it works.
---------- Post added at 05:08 PM ---------- Previous post was at 04:49 PM ----------
OK just tested hangouts 2.3 can't make video call but 2.1.3 does I'm running cm 10.2.1. On 2.3 version video call immediately crash's, 2.1.3 does not.
Sent from my Galaxy Nexus using XDA Free mobile app
Try flashing the latest PA Gapps package... It might be a Google Play Services issue.
acejavelin said:
Try flashing the latest PA Gapps package... It might be a Google Play Services issue.
Click to expand...
Click to collapse
Will try and report back. I've never flashed gapps over another gapps before though. Am I better off just doing a clean install of the ROM and starting from scratch?
You can just flash it and wipe cache/dalvik, reboot... If it complains, wipe system, flash ROM, flash gapps, wipe cache/dalvik, reboot
446
dexterboy1106 said:
I am having the same issue everything works but video calls had cm11 and it worked on there till an update. I'm going to look for older version to see of it works.
---------- Post added at 05:08 PM ---------- Previous post was at 04:49 PM ----------
OK just tested hangouts 2.3 can't make video call but 2.1.3 does I'm running cm 10.2.1. On 2.3 version video call immediately crash's, 2.1.3 does not.
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
acejavelin said:
You can just flash it and wipe cache/dalvik, reboot... If it complains, wipe system, flash ROM, flash gapps, wipe cache/dalvik, reboot
Click to expand...
Click to collapse
I'm seeing the same thing as dexterboy. It looks like video calling is working with the older version but not with the new. I even tried wiping and doing a fresh install with those gapps, but no luck. Unfortunately I really want to use the new version because the old version doesn't support voice only calls. I'm going to try the Tachyon ROM next, but if that doesn't work I may have to revert back to a ROM based on the stock ROM.
I finally got it! I tried the Tachyon 1.2 ROM and everything is working perfectly. It seems to be something with the Kitkat ROMs for that is breaking Hangouts for the Rezound. Hopefully this gets fixed with Lollipop ROMs if we're lucky enough to get any of those.
I'm just happy I don't have to revert back to a stock based Sense ROM. Thanks for everyone's help!
Sometimes its disrespectful for dev that recommending other ROM in another Rom thread, So I've created this thread. Here Every user can share ROM/Mods/Modification.
I request to Forum Moderator @The Flash If he found this as Same/unnecessary thread, He can close this without any request.
** Feel free to discus at any Topic related to Nexus 6P **
I've moved on HERE
But Thanks to all to LIVE this thread...
Add_permissive boot..
https://drive.google.com/file/d/0B10hHGFnGhD2WFliRmY2OW1vRTQ/view?usp=drivesdk
Credit: @bouchigo
Nice collection of DDC, KERNEL and PROFILE for V4A... https://drive.google.com/file/d/0B10hHGFnGhD2X3RPbzBqbGRHNzA/view?usp=drivesdk
Credit: @Sub_Zer0
For Flasholic[emoji298] [emoji485]
Link for Nearly all available ANGLER ROM on AFH....[emoji4]
https://www.androidfilehost.com/?w=search&s=Angler&type=files
Pixel XL Black Boot animation "SOUND EDITION"....
https://drive.google.com/file/d/0B10hHGFnGhD2OUU4S2JxSjMtT2M/view?usp=drivesdk
Rom : Dirty Unicorn 10.6 (often jumping towards the 3 roms in my signature, and honorable mention aosip.)
Kernel : Flash kernel 1.14 /Elemental App
Mods : Adaway apk is a must (and it is included in some roms.) /Viper4arise Deuteronomy 2.1 /Xposed with these modules > Lockscreen Disabler / Youtube Background Playback/Youtube Adaway.
My launcher is always ASUS Launcher.
leondestiny said:
Rom : Dirty Unicorn 10.6 (often jumping towards the 3 roms in my signature, and honorable mention aosip.)
Kernel : Flash kernel 1.14 /Elemental App
Mods : Viper4arise / Deuteronomy 2.1
My launcher is always ASUS Launcher.
Click to expand...
Click to collapse
Thanks for share..[emoji106]
Rom: Nitrogen 7.1 (30/10)
Kernel: Elite Kernel
Mods: Adaway, Substratum, V4A.
Nova launcher all the way
MrCreel said:
Rom: Nitrogen 7.1 (30/10)
Kernel: Elite Kernel
Mods: Adaway, Substratum, V4A.
Nova launcher all the way
Click to expand...
Click to collapse
Ohhhhh!
Same ROM .......[emoji106]
mukesh22584 said:
Ohhhhh!
Same ROM .......[emoji106]
Click to expand...
Click to collapse
Yeah, it's a great rom with a lot of customisation and great battery life :good:
MrCreel said:
Yeah, it's a great rom with a lot of customisation and great battery life :good:
Click to expand...
Click to collapse
Agree with you,
Previous one I was using Resurrection Remix, Damn good ROM but RR team not announced N ROM so I've tried nearly all available N ROMs and stick with Nitrogen....
mukesh22584 said:
Agree with you,
Previous one I was using Resurrection Remix, Damn good ROM but RR team not announced N ROM so I've tried nearly all available N ROMs and stick with Nitrogen....
Click to expand...
Click to collapse
I think I will do the same. I have been following your posts and trust your opinion. It is weekend so I should be able to get it set up for the workweek ahead. Needs to be good as my daily driver. I am a perfectionist! Are you using the build in root and kernel?
SGE_DEW said:
I think I will do the same. I have been following your posts and trust your opinion. It is weekend so I should be able to get it set up for the workweek ahead. Needs to be good as my daily driver. I am a perfectionist! Are you using the build in root and kernel?
Click to expand...
Click to collapse
I personally changed to supersu and elite kernel, but heard great things about flash kernel so I might switch, I highly recommend the rom
Never ment to make you look bad or be demanding. You seem like a very helpful person...just didnt want to tie up his thread. This seems like a fun atmosphere, thanks for invite! You are also are very understanding person. All hail mukesh!!!
SGE_DEW said:
I think I will do the same. I have been following your posts and trust your opinion. It is weekend so I should be able to get it set up for the workweek ahead. Needs to be good as my daily driver. I am a perfectionist! Are you using the build in root and kernel?
Click to expand...
Click to collapse
Friend Ready to Get Nitrogen For Your Angler..
ROM and other Mods Links are in 1st page,
But before flashing you've to need Bootloader,Radio and Vendor images..
I suggest you please Flash all images with Fastboot commands...
Make a full Backup of your Whole Angler including Nandroid backup just in case...
And then start flashing. I highly suggest you Don't restore your EFS partition until you need them.
For Android N you've to need for TWRP 3.0.2.2 or Unofficial TWRP 3.0.2.3..
Here is link for Vendor, Bootloader and Radio images....
vendor:
https://www.androidfilehost.com/?fid=312968873555002895
bootloader:
https://www.androidfilehost.com/?fid=457095661767099340
Radio:
https://www.androidfilehost.com/?fid=312978532265362099
Credit for all images @Mentalmuso
Happy Flashing[emoji4]
I love this idea! :high five:
Well.. My set up is..
10/8 build of resurrection remix (yes, I keep coming back haha)
Elemental x kernel running hawktil6p profile
....um I can't think of anything else at the moment.. Just woke up 5 minutes ago. I'll update this post later with the rest of the into
---------- Post added at 03:13 PM ---------- Previous post was at 03:10 PM ----------
SGE_DEW said:
I think I will do the same. I have been following your posts and trust your opinion. It is weekend so I should be able to get it set up for the workweek ahead. Needs to be good as my daily driver. I am a perfectionist! Are you using the build in root and kernel?
Click to expand...
Click to collapse
My two cents is to try the inbuilt root and kernel first, if you don't like it, then flash away.
But I believe you need he latest supersu ran as systemless mode for ad away to work, which you need the ad away system less zip. I can host the zip if you need it.
@Kapak13
Thanks to join The thread..[emoji120]
Actually I love RR but I can't prevent myself to flash N ROMs,After trying a lot I stay with Nitrogen, Because I found Nitrogen has a lot of similarities with RR in terms of Customization, And yes I'll definitely Revert back to RR when @varund7726 announced official build that is coming soon, Because official CM 14 experimental build for OP3 has out and we'll get for Angler soon.
So I think Its good to wait for them who only want RR for Angler..[emoji4]
Kapak13 said:
I love this idea! :high five:
Well.. My set up is..
10/8 build of resurrection remix (yes, I keep coming back haha)
Elemental x kernel running hawktil6p profile
....um I can't think of anything else at the moment.. Just woke up 5 minutes ago. I'll update this post later with the rest of the into
---------- Post added at 03:13 PM ---------- Previous post was at 03:10 PM ----------
My two cents is to try the inbuilt root and kernel first, if you don't like it, then flash away.
But I believe you need he latest supersu ran as systemless mode for ad away to work, which you need the ad away system less zip. I can host the zip if you need it.
Click to expand...
Click to collapse
How's hawktil6p profile? I've downloaded it but no idea how to apply it
mukesh22584 said:
@Kapak13
Thanks to join The thread..[emoji120]
Actually I love RR but I can't prevent myself to flash N ROMs,After trying a lot I stay with Nitrogen, Because I found Nitrogen has a lot of similarities with RR in terms of Customization, And yes I'll definitely Revert back to RR when @varund7726 announced official build that is coming soon, Because official CM 14 experimental build for OP3 has out and we'll get for Angler soon.
So I think Its good to wait for them who only want RR for Angler..[emoji4]
Click to expand...
Click to collapse
Thank you for making this thread!
And I agree with you, resurrection remix is amazing and once varun releases nougat, I'm gonna be stuck with it haha
And yes, nitrogen is a really amazing ROM. I stayed on that ROM for the longest before coming back to RR
MrCreel said:
How's hawktil6p profile? I've downloaded it but no idea how to apply it
Click to expand...
Click to collapse
Which kernel manager app you're using?
mukesh22584 said:
Which kernel manager app you're using?
Click to expand...
Click to collapse
EX but could use kernel adjustor also
MrCreel said:
EX but could use kernel adjustor also
Click to expand...
Click to collapse
Take that profile you have (hawk tail) and rename it and delete the .txt part. Then drag that file into the elemental x file on your internal SD card (this is where all profiles go)
Open up elemental x manager, hit CPU, turn on the blue toggles for interactive on the first two options, then hit governor options (I believe its the third option down) once the page opens, hit load at the top right, then scroll down and select hawk tail, then hit apply at boot. Then make sure you find touch boost, it may say disabled or enabled already, you can touch the word touch boost and you'll see it change from enabled to disabled or vise versa, then hit the button power button to the right to activate the disabling.
That should do it. You'll see your CPU sitting lower way more often, saving battery.
If my instructions were unclear, I can upload a step by step with pics here if you need
---------- Post added at 04:02 PM ---------- Previous post was at 03:48 PM ----------
MrCreel said:
How's hawktil6p profile? I've downloaded it but no idea how to apply it
Click to expand...
Click to collapse
Just realized that I got so wrapped up in telling you how to set the profile that I didn't answer how the profile is.
Its amazing, no lag, phone never gets hot, battery is at 5 hours screen on time on the lower end, sometimes I can get 7
---------- Post added at 04:04 PM ---------- Previous post was at 04:02 PM ----------
mukesh22584 said:
Which kernel manager app you're using?
Click to expand...
Click to collapse
Quick question... I know you made this thread to talk about Roms we are running. Are you OK with the off topic conversations? Such as governor profiles, battery life, and such?
I just want to keep this thread as it was intended to be. Lemme know if we should steer the conversation into a different direction.