hello/ body，I am a chinese ,the phone xt615 was set sell for china first.
with the newest android 2.3.7 .
there is a problem that i have tried all the ways but not root the phone .
here is the
sending 149 zerglings
sending 189 zerglings
hellions with blue flames
illegal instruction /data/local/tem...
remount failedperation not permitted
unable to ...
unable to ...
unable to ...
and there some photoes of xt615
Try using gingerbreak to root your gingerbread device
Hit thx if i helped
Sent from my Mi320 using Tapatalk
Gauravsgahlyan said:
Try using gingerbreak to root your gingerbread device
Hit thx if i helped
Sent from my Mi320 using Tapatalk
Click to expand...
Click to collapse
i have tried the gingerbreak
but it didnt work 。。。。
Try using fastboot commands to achieve root.my device runs froyo and was rooted with z4root but that won't work on gingerbread
:-(
Hit thx if i helped!
Sent from my Mi320 using Tapatalk
Try the below thing
Download this:
bit.ly/vnRFCt
1.Make sure you have the Motorola drivers
installed - (64 bit, 32 bit)
2.Download the MotorolaOneClickRoot.zip
file from above and unzip it to your
Windows PC.
3.Enable USB debugging on your phone,
(Settings>Applications>Development , Check
USB debugging.)
4.Plug in your phone, and select "Charge
Only"
5.Navigate to the MotorolaOneClickRoot.zip
file on your PC, unzip and run the .exe.
6.Follow the instructions in the command
window.
7.Your phone will complete 3 steps,
rebooting along the way. When it finishes,
you will be rooted.
Hit thx if i helped!
thank you guys。。。
it doesnt work either！
I found a link that stated that your device is similar to moto razr, if that's true then try googling how to root razr, might work with your device
Hit thx if I helped you a bit
Find:
me on Facebook: www.Facebook.com/Gauravgahlyan
my page on Facebook:
www.Facebook.com/droidiser
me on twitter: www.twitter.com/grvgahlyan
my site on the web: www.droidiser.in
no .razy with the 2.3.5
but the xt615 come up with the 2.3.7
it doesn't work on my xt615,,,
oh my god .....why !
Try this, out is stated that it will work in all Motorola devices on 2.3.x
Might work for you:
www.rootingdroid.com/187/root-motorola-droid-on-2-3-x-gingerbread-with-motorolaoneclickroot-howto/
:-$
Hit thx if I helped you a bit
Find:
me on Facebook: www.Facebook.com/Gauravgahlyan
my page on Facebook:
www.Facebook.com/droidiser
me on twitter: www.twitter.com/grvgahlyan
my site on the web: www.droidiser.in
Hi,
Try this: http://bbs.gfan.com/android-3461758-1-1.html
I root all fine the XT615 I recently bought. (Be Patience to step by step following it)
Thank you
---------- Post added at 03:45 PM ---------- Previous post was at 03:42 PM ----------
---------- Post added at 03:48 PM ---------- Previous post was at 03:45 PM ----------
droidiser said:
Try using gingerbreak to root your gingerbread device
Hit thx if i helped
Sent from my Mi320 using Tapatalk
Click to expand...
Click to collapse
Hi,
I would like to see any solution to my XT615 now that only 210MB after few apps install.
It's root & I've moved the Apps which allowed/can be moved to the SD.
Can I delete anything from the internal memory to gain internal MB ?
Thank you
edmond.
Use root uninstaller to uninstall bloatware, be sure not to delete any important apps like phone otherwise you would be deprived of any network
Also you can partition your sd card and use link2sd
Press the THX BUTTON BELOW if I HELPED !!!
Contact me:
My website: Droidiser.in
Facebook
My Facebook Page
Add me to your circles
Twitter
THX ( and i have pressed)
Thank you !
droidiser said:
Use root uninstaller to uninstall bloatware, be sure not to delete any important apps like phone/QUOTE]
Hi droidiser,
Have you been in situation that you have 2 android phones both installed whatapps & both using the same mobile no. when registered whatapps.
This is my situation & what apps warned me to delete the apps due to may be now allow 2 same I.D. (mobile no.) registered. My question is, can I "fool" the Whatapps by using Titanium back up to FREEZE whatapps from Phone A during I use Phone B., and if I return to use Phone A, I Freeze the Whatapps on phone B.
Is Freeze function could do this for me you think ?
I just do not want to install & reinstall each time if I swap to use my 2 android phones.
Thanks Edmond.
Click to expand...
Click to collapse
How do I delete the build-in lock screen apps from Moto (The newest center OK button drag & unlock)
Is it okay to have it delete from system without brink the phone ?
Thank you
Edmond
Deleting the lock screen isn't a wise thing because when you replace it with any other like widget locker, when you switch on the phone, the first screen is the stick lock screen, you might try this,i don't know what will happen but it won't brick your phone and as a precautionary measure, take a nAndroid backup
Swyped from my Mi 310 using xda premium
I just do not want to install & reinstall each time if I swap to use my 2 android phones.
Thanks Edmond.
Click to expand...
Click to collapse
Why not copy the titanium backups of phone 1 to external marry of phone 2
Sent from my Mi 310 using xda premium
Tnanks to reply.
I mean, for example, On Mon.Wed.Fri , I like to use my Defy.
On Tue.Thr.Sat, I like to use my XT615 Motoluxe.
Whatapps seems not allowing to have 2 sim card no. registered onto 2 diffetne phone. Do you recongize that ? What Apps asked me to delete 1 of the copy from either phone. Dont know what's their policy.
Thank you.
edmond.
Copy the titanium backups from first to the second and then the combined back to first one
Press the THX BUTTON BELOW if I HELPED !!!
Contact me:
My website: Droidiser.in
Facebook
My Facebook Page
Add me to your circles
Twitter
eeeemc said:
Hi,
Try this: http://bbs.gfan.com/android-3461758-1-1.html
I root all fine the XT615 I recently bought. (Be Patience to step by step following it)
Thank you
Click to expand...
Click to collapse
I tried the link but get lost in the Chinese, and translation tools do not help me out: I need to download 3 files:
SUTLR_v1.7.5: ROOT_工具集.zip
rootd3.zip (414.96 KB)
super one click.rar (1.2 MB)
Could anyone translate the procedure or give direct links to the files?
thx
pwel
pwel said:
I tried the link but get lost in the Chinese, and translation tools do not help me out: I need to download 3 files:
SUTLR_v1.7.5: ROOT_工具集.zip
rootd3.zip (414.96 KB)
super one click.rar (1.2 MB)
Could anyone translate the procedure or give direct links to the files?
thx
pwel
Click to expand...
Click to collapse
It is pretty straight forward as long as you have all the files downloaded on your PC.
1. SUTLR_v1.7.5 http://115.com/file/dn3kjzc2
2. rootd3.zip (414.96 KB)
3. super one click.rar (1.2 MB)
4. http://www.anzhuo.cn/forum.php?mod=viewthread&tid=161018&highlight=%D7%EE%D0%C2%C7%FD%B6%AF
Basically, you should start install 1. during middle of the install it will ask you a file FXX_PR3_NV.xml where you can get this file from 2.
When complete install sutlr., go for 3. (usb connect to phone) Phone should be switch to USBdebugging = ON. an dapplication unknow source = ON.
This no. 3 procedure Supper One click. is the main ROOT procedure to the phone.
Finally, ensure before you do 1, 2, & 3. You have proper driver for motorola to PC where you can download this driver from 4.
Edmond.
Related
Hi , after i download HTC flyer RUU file from filefactory . it give me a .EXE file but the problem is when i try ran the program it say that .
This version is not compatible with the windows you are running . check your computer system information to see whether is 32 bit or 64 bit version of the program .
is there anyone out there know how to solve this ??? big thanks to anyone there willing to help ..
thank your very much
anyone ?? please help . HTC user
Which version of windows
What are you trying to do? Are trying to update? Are you rooted?
you probably have a corrupt download, try downloading again. Clear your browser cache first
mcord11758 - i using window 7 home edition . why ? do i need to use other version ?
geebee1932 - i trying to make my ROOTED flyer (version 2.3.4) back to (version 2.3.3)
i also tried download the ADB.exe and fastboot.exe both not working as well when i tried opening the file. i got my RUU.Exe . now the main problem is how and what kind of step ? i heard my friend saying that i need to make a goldcard for the RUU.exe . ah man , what should i do now ?
DigitalMD - it can't be i use another method to download the file , is still the same old problem , i even call my friend and told him to open the file , is still the same problem ?
any expect know how to revert back to 2.3.3 without using RUU.EXE
please guide me along , currently i still looking for help around too . it will be a great help , if any expect willing to give me some tips on what to DO ?
What version is your flyer
Sent from my HTC Flyer P510e using xda premium
Here is what I would do. Go to www.goodandevo.com. Download the update you want as a zip file put the zip file on your sd card then boot into recovery and flash the zip. To boot into recovery hold volume down while powering up or Rom Manager has an option to boot into recovery.
mcord11758 - i using 2.3.4 at 2.27.707.1 any solution to go back to 2.3.3 ?
geebee1932 - is a broken link u gave me? what update is that
HELLO everyone!!!! i have error opening RUU file and what should i do to downgrade back to 2.3.3
Best buy flyer right?
Edit looks like from your version number you are a asian flyer. You need to get the full package and Fastboot flash it if you can not run the ruu. I do not have that file. You are the only person I can remember having your issue. Maybe something wrong with the dl on the thread. Maybe try and find alternative source
mcord11758 said:
Best buy flyer right?
Edit looks like from your version number you are a asian flyer. You need to get the full package and Fastboot flash it if you can not run the ruu. I do not have that file. You are the only person I can remember having your issue. Maybe something wrong with the dl on the thread. Maybe try and find alternative source
Click to expand...
Click to collapse
mcord11758 - yup is a asian flyer sadly I very trouble on what to do with this tablet . IT really need a way to downgrade back to 2.3.3 or else i be stuck at 2.3.4 with those poor performance.
any recommend solution for me .
i so glad that someone here to answer my question , THANKS mcord11758
Without being able to open the ruu I can not think of a way short of someone with the same build and flyer type would upload the Rom zip for you.
Can you post the link to the ruu you are trying to download
Sent from my HTC Flyer P510e using xda premium
mcord11758 said:
Without being able to open the ruu I can not think of a way short of someone with the same build and flyer type would upload the Rom zip for you.
Can you post the link to the ruu you are trying to download
Sent from my HTC Flyer P510e using xda premium
Click to expand...
Click to collapse
oh gosh , finally=) thanks god man . i really appreciate with all the time you spend over here .
alright here are my issue with my flyer , the main reason why i wanted to downgrade my flyer is because i wanted to use back whatsapp in my tablet . previously when i was ranning 2.3.3 everything was fine but when HTC send me FOTA and upgrade to 2.3.4
it just screw up everything thing . i could't use whatsapp like normally as the application detected i using tablet and disable .
I try ask my friends and search around the forum , saw one of the post say that i must revert it back to 2.3.3 so that i can use back whatsapp .
so i suppose i need to download this file and execute in my Laptop but it just won't work =( . the link is look BELOW
RUU_Flyer_hTC_Asia_WWE_1.48.707.4_Radio_20.3501.30 .089BU_3809.05.04.10_M_release_193927_signed
http://www.filefactory.com/file/cfdd...927_signed.exe
i doesn't know why i could't open this .exe file at all . PLS HELP !!!!!
thankssss
wwe007 said:
oh gosh , finally=) thanks god man . i really appreciate with all the time you spend over here .
alright here are my issue with my flyer , the main reason why i wanted to downgrade my flyer is because i wanted to use back whatsapp in my tablet . previously when i was ranning 2.3.3 everything was fine but when HTC send me FOTA and upgrade to 2.3.4
it just screw up everything thing . i could't use whatsapp like normally as the application detected i using tablet and disable .
I try ask my friends and search around the forum , saw one of the post say that i must revert it back to 2.3.3 so that i can use back whatsapp .
so i suppose i need to download this file and execute in my Laptop but it just won't work =( . the link is look BELOW
RUU_Flyer_hTC_Asia_WWE_1.48.707.4_Radio_20.3501.30 .089BU_3809.05.04.10_M_release_193927_signed
http://www.filefactory.com/file/cfdd...927_signed.exe
i doesn't know why i could't open this .exe file at all . PLS HELP !!!!!
thankssss
Click to expand...
Click to collapse
my software number is 2.27.707.1
need to revert back to the old version !!!
anyone out there that kind enough to guide me just a few step on what to do.
your issue is not about the version of gingerbread you are on. please see this thread
http://forum.xda-developers.com/showthread.php?t=1179839&page=4
in particular this post (I do not use the app so I can not confirm this method works)
[FIXED] WhatsApp working on Flyer
--------------------------------------------------------------------------------
Hey all,
After much effort I have managed to get my 3g Flyer running on Leedroids ROM to run WhatsApp messenger.
Here's what I did.
(You will need an android phone[rooted] for this to work. If you try this, and you break something, its your problem, its at your own risk.)
*Make sure you have already installed and attempted to register your flyer on WhatsApp.
*Install Root Explorer on your phone and tab.
*On your phone back up your WhatsApp data.
*Now delete the WhatsApp application from your phone
*Wait 5mins so all data is cleared from your phone.
*Now download WhatsApp from the market again
*When asked to register, use your Flyers number.
*Your Flyer will receive the registration message - either forward the message to your phone, and WhatsApp will pick it up, OR - just wait for the timer to expire and insert the 3 digits from the message.
*You would have created the account now.
*Now, on your phone, using Root Explorer, navigate to data/data/ and zip the folder 'com.whatsapp'
*Using bluetooth or email, send the new zip file to your Flyer.
*On your Flyer, navigate to Data/data and DELETE 'com.whatsapp'
*Now extract the zip file, and copy/move the folder into data/data.
*Attempt to run WhatsApp, but it will probably forceclose after the registration window.
*Using Rom Manager, I run the Fix Permissions option and rebooted my Flyer
*I've now got full function WhatsApp on my 3G Flyer!
*Don't forget to delete WhatsApp and restore your backup on your phone.
Dont forget to hit Thanks if this helped...
Sent from my GT-P7500 using XDA App
Hi all devs and members (ps.my first post)
As the title suggests, I need help rooting a Chinese Phone. Amoi n820
The device hardware is pretty awesome for the price, but I have problems
installing gApps as they are blocked on the phone.
I have attempted to root using Unlock Root "its supported?" but unsuccessful.
I have also been stalking Chinese forums
http://bbs.amoi.com.cn/viewthread.php?tid=4028
and
http://products.mobileuncle.com/thread-157352-1-2.html
but have failed to root the device
I believe that the main problem is that the phone driver is not being properly installed.(ps tried the usb fix as prescribed in the 2nd link).
Anyone knows how to fix this?
Cheers
did you manage to do it....?
Found this in a german forum:
http://translate.google.de/translat...-Tutorials-Anleitungen&highlight=n820&act=url
Thanks, holybabel.
Using this it took me less than 10 minutes to root the N820 after receiving it.
So far, the only downside I've found is that you loose the back camera (the button for switching between front/back camera is missing, and the front camera is the default).
Cookbook
(No links due to new-user brainfart limitations on XDA. very helpful, thank you).
This (Chinese) posting explains how to install the V6.0 ROM with root,Google play etc:
bbs(dot)amoi(dot)com.cn(slash)viewthread.php?tid=7755&extra=page=1
Alternatively, download this package: pan(dot)baidu(dot)com(slash)share(slash)link?shareid=64032&uk=4130302605 which contains all you need (USB driver, Flash utility and the "perfect ROOT" ROM v6.0 image).
0) Back up all data on cellphone, charge it to at least 60% battery, do not connect it to the PC yet, and TURN IT OFF. Plug in USB end of the USB - micro-USB cable into the PC.
1) Unpack the RAR package
2) Rename directory to remove all Chinese characters
3) Unpack the N820_V6.0_ROOT_GMS.rar file (unpacks to N820_V6.0_ROOT_GMS).
4) Go into the 'USB驱动' directory, unzip and install the USB VCOM driver.
5) Go into the '刷机工具' directory and double-click on the Flash_tool.exe file. Click on "Scatter-loading" and point to the N820_V6.0_ROOT_GMS\MT6577_Android_scatter_emmc.txt.
6) Hit F8 or click on 'Firmware -> Upgrade'.
7) Hold down the Volume Down button and connect the phone to the PC. The button can be released when the red bar starts moving.
8) After "Firmware Upgraded" window shows, unplug phone, reboot, install and enjoy.
Pictures (and Chinese explanation) can be found here: www(dot)xiaomifood(dot)com(slash)N820V6.0ROM(slash)
Did you manage to get the rear camera back?
I've tried several roms, but none have made the rear camera work again...
duendecillo1982 said:
Did you manage to get the rear camera back?
I've tried several roms, but none have made the rear camera work again...
Click to expand...
Click to collapse
Yes, with the referenced ROM everything is working, including the rear camera
Retteren said:
Yes, with the referenced ROM everything is working, including the rear camera
Click to expand...
Click to collapse
Will be trying that shortly
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
nkhater said:
Will be trying that shortly
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It worked, but the SU is all in Chinese, no idea what to click or chose
nkhater said:
It worked, but the SU is all in Chinese, no idea what to click or chose
Click to expand...
Click to collapse
Oh come on the settings button should be global for android despite the chinese.
Clicking on that you get the menu where the small A icon is for the language and then the first choice is the language change. English should be visible in the list there (hopefully)
Retteren said:
(No links due to new-user brainfart limitations on XDA. very helpful, thank you).
This (Chinese) posting explains how to install the V6.0 ROM with root,Google play etc:
bbs(dot)amoi(dot)com.cn(slash)viewthread.php?tid=7755&extra=page=1
Alternatively, download this package: pan(dot)baidu(dot)com(slash)share(slash)link?shareid=64032&uk=4130302605 which contains all you need (USB driver, Flash utility and the "perfect ROOT" ROM v6.0 image).
0) Back up all data on cellphone, charge it to at least 60% battery, do not connect it to the PC yet, and TURN IT OFF. Plug in USB end of the USB - micro-USB cable into the PC.
1) Unpack the RAR package
2) Rename directory to remove all Chinese characters
3) Unpack the N820_V6.0_ROOT_GMS.rar file (unpacks to N820_V6.0_ROOT_GMS).
4) Go into the 'USB驱动' directory, unzip and install the USB VCOM driver.
5) Go into the '刷机工具' directory and double-click on the Flash_tool.exe file. Click on "Scatter-loading" and point to the N820_V6.0_ROOT_GMS\MT6577_Android_scatter_emmc.txt.
6) Hit F8 or click on 'Firmware -> Upgrade'.
7) Hold down the Volume Down button and connect the phone to the PC. The button can be released when the red bar starts moving.
8) After "Firmware Upgraded" window shows, unplug phone, reboot, install and enjoy.
Pictures (and Chinese explanation) can be found here: www(dot)xiaomifood(dot)com(slash)N820V6.0ROM(slash)
Click to expand...
Click to collapse
Help Please!
I followed these directions and now am getting an "Invalid IMEI" error.
I found these instructions for restoring it - bbs(dot)amoi(dot)com.cn/viewthread.php?tid=8777&highlight=imei
But "mobile uncle tools" is in Chinese - parts of it are translated but not all, and I don't want to select something not totally sure of what it is doing.
where to buy
sandyjagmin said:
Help Please!
I followed these directions and now am getting an "Invalid IMEI" error.
I found these instructions for restoring it - bbs(dot)amoi(dot)com.cn/viewthread.php?tid=8777&highlight=imei
But "mobile uncle tools" is in Chinese - parts of it are translated but not all, and I don't want to select something not totally sure of what it is doing.
Click to expand...
Click to collapse
where did you guys buy your Amoi N820s from i would really like to get one.
hi,
http://www.cect-shop.com/en/amoi-n820.html?___from_store=de
:good:
How much did you pay for it? I mean WITH delivery, zoll, problems...
Sent from my Wildfire using xda app-developers app
I've paid 189,98 € (ca. 245,- $). All inclusive from HongKong to Germany (DHL Express).
Retteren said:
Yes, with the referenced ROM everything is working, including the rear camera
Click to expand...
Click to collapse
What do you mean by referenced ROM ? which one ? I'm a bit lost
Thanks
@Cipriot: Imho it's pan(dot)baidu(dot)com(slash)share(slash)link?shareid=64032&uk=4130302605 - the one Retteren described procedure for.
@Others: I have Amoi N821 since last week and I'm not sure which ROM/archive I should use to root and have Play Store. Can I use N820 files, or is there similar package for N821? Current system says "Android version: 4.0.4; Build number N821_V2.1". I suppose the update package is different for N821, so if anybody knows about such, the link would be highly appreciated!
After I got the new ROM and changed the language in english I still got the Root app in chinesse
What can I do ?
N821
Hello,
I have succefully rooted amoi n821.
Now I can't find out what to do next. Play store doens't work.. Can I use a n820 rom?
I would really appreciate some help!
pkip1 said:
Hello,
I have succefully rooted amoi n821.
Now I can't find out what to do next. Play store doens't work.. Can I use a n820 rom?
I would really appreciate some help!
Click to expand...
Click to collapse
N820 ROM on N821 will screw display up. I've managed to root it and install google apps/market. If anyone wants, I can write up a nice howto. So far I've written a small review of it on my blog: dfourn.com
Guys, i have a little issue, when i safe on my phone mp3 or photo using storage enabler, i see them from my phone after the manipulatuon, but when i safe xap file, i cant see it. I use File Browser to search phone dir. Any suggestions ?
I am really sorry about the name of the topic, i was write from my phone.
You need a full unlocked ROM to install .xap files
*Detection* said:
You need a full unlocked ROM to install .xap files
Click to expand...
Click to collapse
I know what i need mate.I just asked where to findsafed xap files in my phone? As i said in my first post , i use File Explorer on my phone, everyone can make conclusion that i use full unlocked rom :)
Put it up in My Documents and you can see it in there easily. Thats what i do
nithin1992 said:
Put it up in My Documents and you can see it in there easily. Thats what i do
Click to expand...
Click to collapse
i havent "my documents" on my pc. With storage enabler i see only pictures and music and their sub folders. What i need to use to see more folders on my pc?
Why do you even use that? lol. Read this: http://forum.xda-developers.com/showthread.php?t=1521763
Just google for WMDC and install it. Then connect phone, start zune, open WMDC. select Connect without setting up device->Browse files in phone and it will work
nithin1992 said:
Why do you even use that? lol. Read this: http://forum.xda-developers.com/showthread.php?t=1521763
Just google for WMDC and install it. Then connect phone, start zune, open WMDC. select Connect without setting up device->Browse files in phone and it will work
Click to expand...
Click to collapse
I cant make this program work on my laptop. I have the xap installed on my phone, but the connection between phone and pc cant run.
Dont working to me
Try a couple of times, you'll get it. Try this way. Open zune. Now connect phone-> wait for few seconds->if WMDC doesnt show your device yet, launch the wmdc xap and see if it works
nithin1992 said:
Try a couple of times, you'll get it. Try this way. Open zune. Now connect phone-> wait for few seconds->if WMDC doesnt show your device yet, launch the wmdc xap and see if it works
Click to expand...
Click to collapse
I tried more than an hour . It doesnt make connection :(
Is there any specific thing i need to do on my phone device program ?
Nothing really. It usually happens instantly. WMDC actually launches immediately once you connect the phone on my rom.
*Detection* said:
You need a full unlocked ROM to install .xap files
Click to expand...
Click to collapse
Where can i find a guide to install a rom on Lumia 800? I dont wanna pay for apps.
Send them to yourself via email
Or upload them to a server and download them via browser
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
Stefan Caromov said:
I know what i need mate.I just asked where to findsafed xap files in my phone? As i said in my first post , i use File Explorer on my phone, everyone can make conclusion that i use full unlocked rom :)
Click to expand...
Click to collapse
To be honest I thought you were using google translate to ask the question, it made no sense at all so your lucky you even got a reply !
baxee said:
I dont wanna pay for apps.
Click to expand...
Click to collapse
are you serious?
no warez and piracy!!
*Detection* said:
Send them to yourself via email
Or upload them to a server and download them via browser
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
To be honest I thought you were using google translate to ask the question, it made no sense at all so your lucky you even got a reply !
Click to expand...
Click to collapse
To be honest, i dont use google translator mate. Just i was writing from my phone , thats why i ve had so much mistakes. Yes i dont know the perfect english, but i can speak and write a little, but enough to understand almost all posts.
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Click to expand...
Click to collapse
Hi, the language is only english? Thanks.
stefanuccio12 said:
Hi, the language is only english? Thanks.
Click to expand...
Click to collapse
I am Spanish but im posting that in English because is the official language on this forum, just use the google translator, anyway if you have any specific question i will answer you ASAP, send me a private message if you wish
If you are asking about the language of the ROM, is in all languages, is an LG official one (E-425)
Beoxoeb said:
I am Spanish but im posting that in English because is the official language on this forum, just use the google translator, anyway if you have any specific question i will answer you ASAP, send me a private message if you wish
If you are asking about the language of the ROM, is in all languages, is an LG official one (E-425)
Click to expand...
Click to collapse
Thanks! I have try then ROM, but the touch button (back and menu) do not illuminate... sin
Anyway Good Job! I have finally rooted my device
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.::
10. ROOTED!
Click to expand...
Click to collapse
Hello to all visitors of the "XDA": D. Then giving no downloads A link to how you find them and how to follow the instructions you sir? Supposed to say something but was actually not say anything new .Here send links and other stuff sicred my E-mail: [email protected] skype: asan.onbashi[
asan79onbashi said:
Hello to all visitors of the "XDA": D. Then giving no downloads A link to how you find them and how to follow the instructions you sir? Supposed to say something but was actually not say anything new .Here send links and other stuff sicred my E-mail: [email protected] skype: asan.onbashi[
Click to expand...
Click to collapse
The "new" thing is using E-425 ROM instead of E-435 in order to avoid the home, back and menu buttons stop working and the dual sim notification errors, but is not a perfect solution because the back and menu keys backlight LEDs are disabled although they still responding to touch, i found this method by myself, but probably more people found this way as well, and of course, it was not my intention taking credit from theirs, cheers!
This didn't work for me on LG E430
After installing the v10e firmware it kept saying that various processes are stopping
I had to install the official firmware v10d for my phone to work again
I rooted my LG E430 after this link:
http://forum.xda-developers.com/showthread.php?t=2403230
gixy08 said:
After installing the v10e firmware it kept saying that various processes are stopping
I had to install the official firmware v10d for my phone to work again
I rooted my LG E430 after this link:
http://forum.xda-developers.com/showthread.php?t=2403230
Click to expand...
Click to collapse
I never had issues related with stopping processes on my e430, but if you got a proper rooting using this tutorial on the original firmware i will try it, thanks for sharing this method
???
to use framaroot you dont need to use kdz!
kdz is used to flash
and framaroot is used to root
they are 2 different things bro!
AXD96 said:
???
to use framaroot you dont need to use kdz!
kdz is used to flash
and framaroot is used to root
they are 2 different things bro!
Click to expand...
Click to collapse
Framaroot don't work on e430 yet, but is working on e-435 and e-425 (very similar phones), you can flash one of those instead of the original ROM because the phone is compatible, but aparently gixy08 found a post with a better way using other program in order to root on e430 directly :victory:
Beoxoeb said:
Framaroot don't work on e430 yet, but is working on e-435 and e-425 (very similar phones), you can flash one of those instead of the original ROM because the phone is compatible, but aparently gixy08 found a post with a better way using other program in order to root on e430 directly :victory:
Click to expand...
Click to collapse
Hello Beoxoeb
Do you tried this method (link of gixy08)? Can you confirm that it works for E430?
And no problems?
regards Odiad
odiad said:
Hello Beoxoeb
Do you tried this method (link of gixy08)? Can you confirm that it works for E430?
And no problems?
regards Odiad
Click to expand...
Click to collapse
Not yet, im very busy now, but when i have time i will give it a try.
Beoxoeb said:
Not yet, im very busy now, but when i have time i will give it a try.
Click to expand...
Click to collapse
Hello Beoxoeb, please report when you've tried.
Regards Odiad
Hi, it doesn't work for me. If i press power button + volume down, nothing happens and the phone boots normally.
Hi
Beoxoeb said:
The "new" thing is using E-425 ROM instead of E-435 in order to avoid the home, back and menu buttons stop working and the dual sim notification errors, but is not a perfect solution because the back and menu keys backlight LEDs are disabled although they still responding to touch, i found this method by myself, but probably more people found this way as well, and of course, it was not my intention taking credit from theirs, cheers!
Click to expand...
Click to collapse
Thanks but how do ispalnim instructions with downloads A that there is nowhere to write take along with one.Wou direction short measure links (enternet address).If you wish not want you to find a way to direct users to the right of XDA downloads A but obviously you do not want and would rather just something Namik yasno.Publish precise instructions with exact links please not this conundrum where we would suggest a link to thing .Thanks for your attention.
****Greetings!..
I found a way to root my LG e430 that doesn't requires flashing the ROM or Command Promt.The only ''problem'' is that has the chinise SuperUser but you only have to press the Right button in order to give you the permission...here is the method.
http://forum.xda-developers.com/showthread.php?t=2403230
Enjoy!
Sent from my rooted LG Optimus L3 II
nice
Beoxoeb said:
Hello guys! I finally found the way to root this terminal without losing any functionality (Home, Menu, Back buttons and LED notifications working).
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit.
10. ROOTED!
Click to expand...
Click to collapse
Just made an acount to say thanks...works like a charm...I tryed all tutorials, even with the chinese root...no result, It didnțt detect my phone.
+ back and menu button work
Hello @Beoxoeb,
I wanted to ask you If with this root method you can move apps to the phones SD Card or at least uninstall system apps such as Google Chrome.Is that possible?
Sent from my LG Optimus L3 II
A little help..
I've managed to root my LG E430 with this tutorial, thanks for that , but I have a problem with my 'back and options' buttons, their light is gone... The 'home' button also, although it shows a signs of life sometimes (with some apps and sometimes on notifications).
So my questions are:
1. Is there a way to 'add' this settings to the system (cause my guess is they were deleted/misplaced from the system)?
- via android SDK on PC, file manager, or something else (just guessing )
2. Is there a KDZ file for the e430, the original one ?
- used for unroot or fetch the settings for the original one
---
Thanks again for the tutorial and thanks in advance for my questions,
dnisko
Help
beoxoeb said:
hello guys! I finally found the way to root this terminal without losing any functionality (home, menu, back buttons and led notifications working).
Steps:
1. Set your device on download mode (shutdown the phone, then press "on + volume down") and connect via usb on your pc
2. Download this file: M eg a.co . N z /#!agxrtzda!z0ni-g5eg9d-x9yewvckcfn8hpywvbex6ycop5mtqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install msxml 4.0 sp3 parser (msxml.msi)
4. Run kdz_fw_upd.exe
5. Set "type" on "3gqtc" and "ponemode" on "diag"
6. Select v10e_00.kdz from the folder that you downloaded
7. Click on "launch software update" and wait a few minutes
8. After it finished, put framaroot-1.6.0.apk on your sdcard or internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute framaroot, use gandaf exploit.
10. Rooted!
Click to expand...
Click to collapse
when i press launch it says phone not found it doesent even show on the my computer folder helllllllllllllllp :'(
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
satawat.thongsawat said:
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
Click to expand...
Click to collapse
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Does it sync your Google contacts correctly? If so, what did you need to do to get that working?
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
satawat.thongsawat said:
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
Click to expand...
Click to collapse
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
vyming said:
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
Click to expand...
Click to collapse
This is a Chinese ROM?
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
satawat.thongsawat said:
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
Click to expand...
Click to collapse
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
gregou said:
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
Click to expand...
Click to collapse
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
satawat.thongsawat said:
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
Click to expand...
Click to collapse
We'll get Kikat firmware on this phone for sure, we just have to wait from Huawei to rolling out this version.
It's not portions of google apps as when you do this procedure i explained, ALL the gapps are installed automatically on the phone.
Basically, Huawei made a script in the phone for not allowing these apps to be installed, but when you rename this file, the script is no longer available, then all the gapps are installing after the next reboot !
Mediapad X1 7D-503L
The only deference is the directory:
/ cust / channel / charm_china_l / xml / ( charm_china_l not charm_china_u)
and i use the command as su
mount -o rw,remount -t rootfs /cust
because when It try to rename the UNSTALL_APK.XML I take the error "Read-only file system"
thanks
X1 undetectable by the PC
I have GApps Syncing quite fine without rooting, except the contacts sync which is missing from the sync list. I see your steps are very straight forward, but unfortunately my X1 is not recognized by the PC, although I've installed HiSuite from Huawei website. I've also tried to install Huawei device driver for X1 from this site, but still unrecognized. Accordingly GeniusRoot is unable to detect and root my X1.
I'm Win 8.1 (both 32 and 64 bits), and I've tried to do all these procedures with Compatibility model for Win7, run as administrator, yet the X1 is till not detected by the PC.
Also USB Debugging is enabled in Developer Options.
Any idea what's the reason for this?
More info about my version:
Baseband: 21.529.00.00.000
Kernel: 3.0.8-01317-gcd83a45 [email protected] #1
Build Number: 7D-501uV100R001C233B013
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address :
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
sordanny said:
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
Click to expand...
Click to collapse
OK I managed to figure out the solution
Used Root File Manager to rename and voila!! Renamed the file, restart device and got all the Google stuff setup on the phone
Now there is this second problem which is a big pain in the arse
I can't add a second Google account on the phone to get all my contacts..........
Under settings -> accounts -> add account -- there is no option to select "Google" !!!!
Have anyone also face this problem and is there any solution??
Thanks in advance for the help
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
I can confirm this is true. I did a search for "gms" rather than Google - tap on the big link you get at the top of the results page, which takes you to a page of all the Google apps and services, and install everything! (You can always uninstall what you don't need later). No root required, and everything is syncing properly - calendar, contacts, tasks etc. Super easy.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Have you got Google Contacts Sync in your list of downloaded apps?
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Danny here's how to fix it, and u don't need root
if u have rooted and edited the unstall_apk.xml, best is download and flash the stock ROM first:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=20241 (click 立即下载 on the right)
u can also ignore it but all preinstalled google apps will become system apps, and if u've deleted some huawei bloatware u might not be able to OTA update latest B006 firmware
All the Google stuff can work perfectly even can add multiple Google accounts. Best thing is, u don't need root. Here's how:
1) Go to app centre - all - brand and look for the one with 谷歌 (sorry I've updated app centre and it might be different if u haven't update)
2) Download 联系人同步服务, 日历同步服务, Google Playstore, Gmail and Google plus. The rest can be downloaded from playstore
3) After install, open either playstore or gmail and sign in
At this stage, Google is already setup properly with contacts sync just it cannot add multiple Google accounts. Workaround:
4) Open Google plus. Settings - add account
And voila. The phone is perfect now
There's also an OTA update for the LTE version which updates your phone firmware to 7D-503LV100R001C233B006
Cool new features includes double tap screen on, some control over notification flash light for messages and background battery optimization :good: