Related
I have added a few apps to my phone but before I get into changing rom should I back up phone? Whats a good app to back up phone and what do you do..backup phone when its working before adding a bunch of apps then after its all done can you do another back up??
Let me know
I downloaded advanced config tools and did 3 different cache changes that were reccomended to speed it up or something..so I decided to do it and tweaked mine.. Should I not back up now b/c of doing that??
you can use sprite backup
For me, i always, loose all programs after reset, it cleans out old junk i no longer use. But in case i need some save files or backup files for some programs, yes i do a backup for those.
Other than that, you should backup your contacts, call logs, messages, if needed. Best program to do all the above is PIM Backup, its a wonderful free tool that does the job PERFECTLY.
EnergyROM always has PIM Backup in it, which btw is the best ROM out there. Every time i want to place a new EnergyROM, i first do a backup of what i need, then flash then run PIM Backup again and restore. All done in less than 3 minutes
Cheers mate
Closing thread guys,
There are plenty of applications out to the public on backing up your pda.
Also this is an area for rom development.
Peace,
Joshua
Since early July, I've been using 6.5 build 23001 from Da_G's kitchen and recently have been tempted to upgrade to one of new 6.5 builds. I'm at a state where my device is completely stable and functional for my use. How can I backup my device in its entirety prior to upgrading? I've tried solutions like Sprite backup in the past (and that seems to be the popular solution on these forums), but find it inadequate especially after flashing different roms. Is there some way to backup the device so if I have to I can return/flash back to the original state of the previous rom? I'm thinking of something akin to making a system/drive imaging/ghosts on the PC so that I can tinker with a new 6.5 build but can restore fully to exactly where I was before if necessary.
thanks
S A S H I M I
www.winmo-experts.com
Sashimi isn't what i'm looking for--it seems like an automated installer that will cut down the time/drudgery of reinstalling software. i want a solution that i can essentially restore my entire device from it current existing state. think of it like creating an image of the operating system partition on a computer for later restoration. SBP Backup, Sprite Backup, and others like it simply backup contacts, messages, settings, and various data and many times after restoring things are a little wonky. as far as i know, none of these actually back up the ROM as is. i essentially want to go from a hard reset to my formerly working device in no time.
The way I've done it is run Sprite, upgrade to the new ROM, fiddle, then flash the old ROM that I was using, then restore from backup. It's about the only way I've found.
Sunnysoft Backup Manager - never failed me on my RAPH creates self-extracting 1:1 image of internal storage, registry and system databases. You can restore it even without the app installed, it creates 4 files one of which is .exe that restores the backup.
Sprite and SPB can be buggy when flashing different ROMs. Not all of the stuff is in the same place when you go to restore it, so some things get left out, and sometimes the wrong thing gets changed.
If you are restoring the same, exact ROM, the backup should cover all areas and your device should be as it was before.
Actually there's a way to make your backups flashable. I'm trying to find it since I just saw it the other day. Its around this forum. I want to backup my ROM so I can share it with my friend without having to cook my own.
Found it!
http://forum.xda-developers.com/showthread.php?t=427507
Doesn't Look too hard....
Hi!
I have the Energy rom on my TP.
I want to upgrade to the last rom avaliable all the time.
If i use a software like Resco Backup, is it possible to perform a full backup, flash a new rom and then restore my full settings and customizations and aply to the new rom??
thanks!
tntnt said:
Hi!
I have the Energy rom on my TP.
I want to upgrade to the last rom avaliable all the time.
If i use a software like Resco Backup, is it possible to perform a full backup, flash a new rom and then restore my full settings and customizations and aply to the new rom??
thanks!
Click to expand...
Click to collapse
You can chose whatever backup software you want. Sprite offers a restore after ROM upgrade, so does SPB but be assured that in 8 out of 10 cases it will FAIL, your brand spanking new ROM will be messed up, sluggish, unresponsive.
The only way these backups DO work is a 1:1 restore. Let's say you back up, installed a theme, phone hangs or you don't like the theme and cannot convert back.
Hard reset SAME ROM --> Restore --> > Done.
Get accustomed to MyPhone, PIM copy, UC, Sashimi and other tricks because you wont be happy with the restore.
Catch phrase --> "Trust me!"
agree with tyguy...
PIM Backup, SASHIMI, and UC is very useful in backup/restore... I use them all
r04d5t3r said:
PIM Backup, SASHIMI, and UC is very useful in backup/restore... I use them all
Click to expand...
Click to collapse
There are SOME things that will work that way. If you use Sprite Backup, you can decide which things to restore. If you avoid restoring the registry, you can still use it to restore selected items like PIM databases. I used Sprite Backup but it has become unusable and it seems the company has stopped responding to support requests. AFAIK, SPB doesn't offer the ability to select but I may be wrong.
I'm curious about one thing though. When using things like PIM Backup, what usually happens is once I sync, all PIM Info gets duplicated (Active Sync thinks the data restored via PIM Backup is something "new"). Does anyone know a way to fool Outlook/Active Sync to not behave that way?
If like me you have meetings and contacts in the thousands, using Outlook/Activesync to restore PIM info to the phone after flashing a new ROM takes a really long time...
I can confirm that newest version of SPB Backup never worked for me on EnergyROMs. I could not connect to gsm network even on a same ROM. Sprite Backup works like a charm, but only on the same ROM. It is good just if you are installing something you never know what happens. So it could work just like some restore points in windows. As the guys here said, best method is to learn UC customizations, Sashimi, but i have to say, it is not that easy, for some people...
i work with SPB Backup with ROMeOS and it worked perfektly even on different ROM Versions. I tried to restore a backup made with SPB Backup under ROMeOS WWE and restored it under GENY GER Version, worked without Problems after changing some names/pathes in the registry (Speicherkarte => Storage Card etc) depending on the language. Not working links like Total Commander werent in the installation of GENY in the main memory; they run after installing TC in the windows directory; for me the Speed was absolutely ok, but i dunno, how fast it would be if you work with UC. I restored all my BUs since ROMeOS since version 1.4 until ver 2, but then i decided to install everything new, what took 2 weeks of braincooking but i got 50 MB more free RAM. Of course its better to install everything new, but if its a complex program & settingsstructure, with a lot of tweaks, colored task bars and so on it is much easier & faster to restore a BU...
SPB has the opportunity to choose which parts of BU you want to restore ... from complete restore (with ROM Upgrade mode/ phone Changing mode) over all or single databases to even single files, if i remember right...
Greetz
Boris
P.S.: i only worked with WM 6.1 ROMs
If I'm in the right mood I'll start a new thread under the general Raphael section because I think this does belong here to the ROM dev. section.
Just in a nutshell:
Sprite has and had major problems if the basic SYS changes dramatically (WinMo 6.1 to 6.5 or 6.5 to 6.5.3) thus I stopped using it BUT it has a nice but not really great working "Restore after ROM change feature".
My basic tricks are:
PIM Backup with SPB
Sync with MyPhone
XML changes (like program paths etc.) with Adv.Config
Install with Sashimi
Copy with Total Commander (programs, Opera settings and bookmarks).
Username and personal data either manual input or Sashimi.
This worked since WinMo 5.0 with no issues and it takes me ~ 30 minutes after a flash to be back 99.9%. I do have to install a few things manually
Don't have much time now so I'll post the link to the "How To" later today.
You can actually do a lot with just pimbackup. The custom option is pretty cool-it allows you to backup and restore custom files, much like sashimi does, except that once you set it up, it will do the backup for you instead of having to do it manually. If you uncheck the 'binary' option, you basically just get a zip file with a directory of all the files you selected for backup.
There's a lot that can go wrong using sprite or a similar app. Even if you don't restore registry settings, you might insert something into the startup folder that screws up your phone (it's easier than you'd think, lol). A week or so ago, I decided to try running a task manager at startup (IT Task, which is really cool), and for whatever reason, when you put a shortcut for it in the startup folder, you have major problems booting up the phone. After about 10 tries, I got lucky and the phone booted up, so I didn't have to do a hard reset (which I wasn't fully prepared for).
You're probably ok restoring with sprite if you stick to the same rom-line, but it could certainly be a mess if one chef stores apps in \program files but the new chef has them all in rom (in \windows). Then you'll end up with two copies of everything, which is a waste. It may work, but it's a lousy way to go.
Hello there.
Can anyone tell me if some program like Acronis True Image present, for HD2...
Just to make system image when system is adjusted as you like.
And if enything goes wrong, just format and restore system image, and not need to adjust enything again.
10x
for whole system backup:
SPB Backup (my personal favorite, customisable backups, comes with unpacker for PC), Sprite Backup, Resco Backup - all commercial
-> word of caution: be careful when changing ROMs, full restore may crash your system
for selective automated registry settings exports:
MortScript + FDC Task Manager (check in Mortscipt thread for script examples)
Thank you very much. I'll try SPB backup.
But I not understand about "full restore may crash your system"...
Can you please explain what you mean?
I have last official Malaysian ROM, and will never install any custom ROM... I dont need it. All I need is after adjustments and tweaks, just make backup of system, and if anything goes wrong ( after some bad program install, or some bad system change and forget how to go back) just restore all system, whith every programs installed and changes maked.
So is your caution important for me to? Or you tell about custom ROM-s
Sorry about my English
and big 10x
what I meant were stock ROM updates, but it applies to custom ones as well
assume you have official ROM version 1.48, and full system backup,
now after some time HTC releases new official ROM 1.65, you install the ROM upgrade, in the process the whole memory is erased, and now - if you do full restore, your system may (but does not have to) crash, because new ROM may mean new system settings, while restore will overwrite them with the old ones
that's why its good to do 2 separate backup - 1 for system, 1 for files (mails, contacts etc.)
additionally SPB and Sprite automatically discover that new ROM has been flashed and provide you with 3 levels of restore (I don't remember the details, but it's something like full, partial and max safe restore)
Thank you very much.
Of course i will make new back up, each time I update ROM or make some changes
Can you please help me again...
All I need is some Registry Values from this key:
(They was deleted after I install one stupid cab...)
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\Sys temLink]
here you are:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink]
"HelveticaNeue LT 35 Thin"="\windows\tahoma.ttf,Tahoma"
"Helvetica Neue OTS"="\windows\tahoma.ttf,Tahoma"
Man, you really help me!
Thanks a lot!
I'm running streakdroid 1.9 but I would like to do some experimentation with my streak. If I flash a new rom what will I lose? How do you backup your data so you can flash to your hearts content?
Thanks
if u flash stock roms, they do a factory reset during first start up.
So u end up loosing everything.
However if u flash .zip version of the stock roms using CWM or streak recovery , u will retain almost everything but may loose somethings like root and so on.
Remember stock roms will flash its default recovery everytime it boots up
Ok thanks. Is it wise to do a factory reset anyway?
What tools can I use to backup messages, apps, photos, etc?
I use titanium backup.
If you do a nandroid backup, when you restore it, everything will be just as it was before you flashed another ROM...
As far as using Titanium... it has never worked for me completely, nor has MyBackUp Pro, they cause me more headache than being useful...
I have gotten to the point to when I flash a new ROM, I just manually install everything, I know it sounds like some hassle, but you end up with a much smoother operating phone.
I even do a nandroid backup first, then go into my ROM and manually uninstall everything, so that when I boot up my new ROM and setup my market account, it doesn't try to install everything on its own and bog down my phone at first, I install everything manually in the order I want and set them up as I go.
I know this sounds cumbersome, but I have found it creates a cleaner environment and practically eliminated force closes
That is the way I like to do things also but what about the things that you can't just re-install e.g. sms, application specific data?
Advice
I was having a sim card and constant restart issue after updating to streakroid 2.4.4, and even after flashing dsc, the problem persisted. After I reviewed the steps I had taken I realized that I never did a factory resest (fearing I would forever lose my precious app data, which I did -_-). It turned out that was the fix, after doing the factory reset, my sim card was recognized immediately and a couple of the text I had missed showed up. However, I fixed one fixed problem and developed another.
Even though I restored a MyBackup and Titanium backup I did right before resetting I recovered my several apps without their precious data (setting, notes, bookmarks). I tried doing internal backups within the apps, some conveniently had syncs to a cloud yet I missed doing that with a few apps because I have over 100+ and I use more than half on a regular basis (even if for 5 minutes). All my apps are on my device, which is a good thing but I cant appreciate that given the missing data.
So my advice is:
Use apps that have can automatically backup or sync data -- there are enough apps with similiar utility that you can avoid ones without that function.
Do a manual backup within your important apps. -- Some apps backup files to locations that may be wiped during update, doesn't have auto backup or the last backup is months old.
Pics, texts, call logs are easily backed up -- Backup programs will explicitly state or ask what to back up in that regard.
Do a nandroid backup -- I believe this only restores rom and apps but someone can correct me.
Caveat
Through all the research done before actually need to restore a backup I missed the fact when restore apps depending on the restore program every app has to be reinstalled individually. If you have more than 25 apps then #$#@!, also for some reason when restoring with titanium if during a batch restore you come across an app if you hit cancel during one of the install prompts because you actually don't want to restore that app the batch will freeze and you'll have to force close titanium and start the restore all over. Go through the list of restore options and choose each app one by one, save yourself the time.
Lastly, to piggy back off what was said before, a factory reset( FR) after updating rom is always recommended but its not always needed. Most roms will update without causing you to lose any data but like I said previously I had sim card issues when I updated without a FR. YMMV
At this point I don't know if this helps the OP but maybe it will benefit someone else who reads this thread.
This guide by _n0p_ tells how to do an upgrade and minimize the re-installation of apps.
Key items:
Use the backup function of any apps that have it
Don't count on restoring data with TB or My Backup
Make a nandroid - just in case
I have found TB and My Backup to be useful for things like browser bookmarks.
The post linked to discussed going from Froyo to Gingerbread but the same techniques apply for moving to any other ROM.
Last time i changed roms, i used the Dell backup utility for evertyhing but the apps, which can be backed up together with their data with QtADB which creates a backup folder on your SD. After installing the new rom, i chose advanced recovery from the Dell Utility and set it to recover everything but the apps, which i recovered with QtADB. However, I also strongly recommend nandroid, in case the steak doesn't boot after the install.