OMG can someone please help me. Its almost bricked!!! - HTC EVO 3D

I unlocked my phone with the htc method. I had root, and superuser. titanium backup worked fine. I made a nandroid backup before I started messing with ROMS. I decided to flash infected's ROM first. Everything seemed to be going ok. It rebooted, and I got the cool beats animation. Then I got the htc splashscreen. then it just flipped back and forth between them for a half hour or so. something was obviously wrong. I tried rebooting the phone: same results. I can get into bootloader, both by holding volume down while powering up, and through the command prompt, via adb. I have a nandroid backup through twrp recovery, so no problem, right? well, it didn't work. So now, I can boot into the bootloader screen, but nothing else. I tried flashing a different ROM, but to no avail. Eventually, I noticed that I had htc sync running while I did all this. Did that wreck me? Any ideas what I can do now? I just tried to restore my nadroid backup again, without htc sync running, but all I get is a white htc screen. Please help me unbrick my phone!!!

whenever I try to flash ANY other rom, I get to the part where I have to use fastboot to flash the boot.img, and it says "sending boot" and just stays there forever.

Tried flashinf recovery.img, and the same thing happens. "sending recovery" and screen pause

God I hope someone smarter than me feels generous enough to help here...

Are you on windows? Did you install htc drivers?
Sent from my PG86100 using XDA App

I am on windows 7, and I have the htc drivers installed. Like I said, I successfully completed the htc unlock method. I had no problems until I tried to flash a rom

So you hold volume down and power to enter fastboot. Select fastboot by hitting power again. Then plugin usb and it should say fastboot usb. Then what command do you type after that?
Sent from my PG86100 using XDA App

now it wont even go into hboot. not with vol down and power, or through command prompt. before, it was going into hboot just fine, and I was using fastboot flash boot boot.img to flash the rom, but everything froze

now when I plug it in and use the command prompt to enter adb reboot bootloader, it just says device not found. holding power and vol does nothing

Hmmm.. Not sure why you can't get into fastboot but your using the wrong command. You want to type fastboot boot recovery.img. Recovery being the name of the recovery image in your folder.
Sent from my PG86100 using XDA App

thanks. I'll try that if I can get back into the bootloader

What you did works for that only installs the kernel. Then you need to flash the rom. I never did it that way nor do I use twrp
Sent from my PG86100 using XDA App

I did flash the rom.zip from twrp recovery. when it rebooted, it started to work, then just went into a boot loop. then I started trying to fix it, now it wont even come on

For now, I'm hoping that the battery just discharged during the process. I'm gonna let it charge for a few hours, and see what happens. I'm afraid that I might have done a battery pull in the middle of the process, though. When I first flashed the InfectedROM, the phone rebooted and got stuck in a loop between the beats graphics, and the htc quietly brilliant screen. it just kept going from one to the other. It went on for quite a while, and eventually, I think I pulled the battery to stop it. However, I was still able to get into the bootloader after this. I tried to reflash the rom, and a couple of others to no avail. When I decided to try to reflash recovery.img, is when it hit the fan, so to speak. after that, I was unable to boot into fastboot, or even get adb to recognize that there was a device there at all. Man, I hope letting the battery charge works. Like a moron, I don't have any insurance on my phone.

when I plug it in, windows intermittently makes the gong noise that something is connecting or disconnecting, and windows explorer briefly recognizes that a removeable drive is present, but I can't get the thing to charge, or turn on at all, and adb refuses to recognize that it connected, so I still cant manually put it into fastboot

well, I left the phone plugged in for about 7 hours. I hooked it up to the computer and once again tried to get into bootloader through adb. The computer said that the "daemon was started successfully" then goes right back to device not found. I guess Im screwed if no one else knows any tricks or ideas..

izzy spun said:
well, I left the phone plugged in for about 7 hours. I hooked it up to the computer and once again tried to get into bootloader through adb. The computer said that the "daemon was started successfully" then goes right back to device not found. I guess Im screwed if no one else knows any tricks or ideas..
Click to expand...
Click to collapse
Pull the battery
Wait 2 minutes.
Put battery back in.
Hold down Vol - and power.
Do not be connected to anything. And are you SURE your battery is good?
PM me if you see this and I dont answer.

I pulled the battery and waited. I even grabbed the battery out of my girl's evo3d. I can get into bootloader via the vol down, and power, but it stopas and asks if I want to update. If I say no, it just reboots to the htc screen. If I say yes, it says updating, then says press power to reboot. Then it goes directly to the htc screen and freezes. While it's in the htc screen, I can use command prompt to get it back into bootloader via the "adb reboot bootloader" command, but I can't get to my recovery menu. I was going to mount usb storage, and put another rom on the sd card, then re-flash, but it won't allow me to get to recovery

izzy spun said:
I pulled the battery and waited. I even grabbed the battery out of my girl's evo3d. I can get into bootloader via the vol down, and power, but it stopas and asks if I want to update. If I say no, it just reboots to the htc screen. If I say yes, it says updating, then says press power to reboot. Then it goes directly to the htc screen and freezes. While it's in the htc screen, I can use command prompt to get it back into bootloader via the "adb reboot bootloader" command, but I can't get to my recovery menu. I was going to mount usb storage, and put another rom on the sd card, then re-flash, but it won't allow me to get to recovery
Click to expand...
Click to collapse
Ok, soundslike you have a "PG86IMG.ZIP" on the root of your SD card. Dont worry, just swap cards with your old lady but put the ROM on it first.
You wont be able to do anything until you swap Sd cards or otherwise delete the PG86IMG.zip.

when I use command prompt to enter bootloader, I get the opening menu: bootloader, reboot, reboot booloader, and power down. If I press power to choose booloader rather than fastboot, the phone immediately goes back to asking me if I want to update, and no matter what I choose, the results are the same. it reboots to the htc screen

Related

Phone Wont Boot [Help]

Hey guys,
So I properly powered down my phone and went to go into the bootloader by holding vol down + power button. As soon as it opened up the bootloader the phone turned off. I went to turn it on and it flashes the white sprint screen for less than 1 sec and turns off. When I plug it into a charger the light turns on for a few secs then goes away.
I have s-off + cwm.
I have read that if your battery dies in the bootloader after installing cwm your battery won't charge and the phone won't boot. I am not sure if this is the case but was hoping to get some input.
I am not sure what percentage my battery was at when this happened.
Thanks!
Go to bootloader (cwm) and reinstall your back up rom that outta do it. And after download the rom you currently have but replace your old one and flash it over usin cwm
Supa Dupa Troopah
My phone only stays on for 1 second tops. I cannot go to my bootloader. My computer sees the phone even when it won't turn on witch is weird. I also cannot communicate with the phone with adb / fastboot etc. The only thing I have not tried is hacking a usb cable to communicate. Any advice would be great. I will try a battery tomorrow.
ADB
Wow hey ok so I can see the phone in ADB after all... List of devices attached
HT167HX05101 recovery
Is there a way to flash the old recovery?
Or can someone point me to the RUU.exe? Not the ZIP
Thanks!
EDIT:
Well never mind... I had adb and booted into bootloader and flashed team win recovery from fastboot and it failed - sending 'recovery' (5016 KB)... OKAY
writing 'recovery'... FAILED (status read failed (Cannot send after transport endpoint shutdown))
Now the light stays on when I plug in but no longer flashes when I power button and no more adb. I'm screwed
Idk what your problem is since i do not have your phone in front of me, either you deleted an import file and are now screwed no offense and cant boot your phone my suggestion is to either call or take it to the store by gettin a new one. I would tell them your phone got hot all the sudden and just crashed that way its under warentee
Supa Dupa Troopah
can you use fastboot? Also, leave the phone alone and charge it, while off, for a bit. If you come back to a full charge phone and hold vol down and then power, it should boot into fastboot, try running a fastboot command from the PC. Also, you could download twrp 1.0.2 zip and put it on your SD card as PG86IMG.zip, same vol down/power and it *might* install the recovery from hboot. Don't give up yet. In theory if your charging light turns on, you're not bricked.
hopefully this works for me !!
Thanks
il Duce said:
can you use fastboot? Also, leave the phone alone and charge it, while off, for a bit. If you come back to a full charge phone and hold vol down and then power, it should boot into fastboot, try running a fastboot command from the PC. Also, you could download twrp 1.0.2 zip and put it on your SD card as PG86IMG.zip, same vol down/power and it *might* install the recovery from hboot. Don't give up yet. In theory if your charging light turns on, you're not bricked.
Click to expand...
Click to collapse
Thanks for the help.
I last time I had adb I got into the bootloader by using an adb command once in there I flashed teamwin rec. It failed during install and ever since I am locked out. I can't get any commands. I wonder if it damaged my boot loader. Ill keep trying otherwise I should be able to get it swapped since it does not boot at all
SpyFi said:
Thanks for the help.
I last time I had adb I got into the bootloader by using an adb command once in there I flashed teamwin rec. It failed during install and ever since I am locked out. I can't get any commands. I wonder if it damaged my boot loader. Ill keep trying otherwise I should be able to get it swapped since it does not boot at all
Click to expand...
Click to collapse
yeah if you can't get into the bootloader/adb/recovery/rom then sprint can't either
Sorry to be a bother.. but can someone check out my problem? I really need help. I know, i am such a troll coming to another post to look for help.
-Mike
Check out this threath i hope it helps..
http://androidforums.com/evo-3d-all-things-root/385959-error-16-sprint.html
Supa Dupa Troopah

[Q]stuck at splash screen and wont go into bootloader

So I just used Bootmanager for the first time. I was having alot of issues so I rebooted and now it sits at the splash screen and it isn't going into the bootloader. Kind of freaked out.
What do I do to fix this?
Thanks.
are you s-on or s-off?
I'm S-off on 1.49
edit: sorry, I meant 1.40
If u can get to recovery, go to install zip and find the boot manager folder, look in there for a phone Rom folder, their will be an update.zip, flash it and reboot.
I can't get to the recovery. It wont even boot to the spash screen unless it's plugged in.
Pull the battery, put it back in, hold vol down and power, what happens?
Well if it's unplugged it wont do anything. But, if it's plugged in, it goes to the splash screen.
Plugged into what, ac power or USB to comp? Try taking out the sd card and then try vol down and power.
Either the usb to computer or AC. It does it for both.
Took out the sd, no change.
I haven't seen a prob like this, without hboot you'd never see the splash screen, it has to be there. Maybe leave the battery out for a few minutes then try holding vol down+power. If you can get to hboot then you're good but with no hboot your not so good.
Hmm, so my red charging led is blinking now while the phone is off, wasn't doing that before, any idea on what that means?
I know that when I drain my battery all the way till it shuts off, it won't charge and I get the blinking red led. I have to put in a spare battery and let the other sit for a few hours befor it'll charge.
What's it do when u just press power? Just goes to the white HTC screen and stays?
Yeah it does that, I'm wondering if there is something wrong with my vol down.
Does it feel like it "clicks"? Take the case off and try to press vol down+power.
edit..Lol, just tried it without the case and its not as easy as I thought.
It does click, I tried it without the case, it was working earlier today though. The last time I had it on, I was rebooting into recovery and the screen went black and just sat there, so I did a battery bull and that is where I am now, Would something have happened if I did a battery pull in that state?
I wouldn't think so... I've had to pull it in situations like that, generally you just don't want to pull the battery during an ruu update or a pg86img update, when its writing to certain partitions. What recovery are you using and what Rom did you try to flash with boot manager?
I'm using TWRP 2.0 and my phones rom was on mean rom. I put ics playground on slot 1 and was having alot of issues getting the phone to wake up and random freezes and crashes. I attempted to boot back to my phones rom but it wasn't doing it. So I attempted to flash Chads AnthaX ICS playground kernel and bootmanager crashed. so I decided I would just boot into recovery and do flash the update zip for bootmanager.
That is everything I did
brenstar said:
It does click, I tried it without the case, it was working earlier today though. The last time I had it on, I was rebooting into recovery and the screen went black and just sat there, so I did a battery bull and that is where I am now, Would something have happened if I did a battery pull in that state?
Click to expand...
Click to collapse
It just sounds like something weird happened to your recovery partition. If you pull out the battery and put it back in, then plug a usb cable into your computer. Do not turn it on. Run the command "adb reboot bootloader" (from your computer). that should turn on the phone and put it into the bootloader. From there, redownload your custom recovery of choice to your computer. Make sure you have a .img file. Type in "fastboot flash recovery [NAMEOFRECOVERYIMAGE].img". Now run your custom recovery and restore the update.zip for your ROM.
~co~
I'd be very surprised if your phone is broken. Sounds like an easy fix and I wish I could help more. You really can't do anything without getting to the hboot screen. No ruu, no turning s-on to re downgrade, no loading a recovery from fastboot.... I'm trying to think, maybe somebody else will jump in here and teach both of us somethin.
I know that a couple of other ppl had prob with a certain release of playground and twistedumbrella fixed them right up. Maybe you could hit him up. He's way more pro than I am.

Need Help!

Here is the story. my parent bought my brother the amaze 4g for his birthday. he was messing with it trying to root it and such and today he was trying to install a new rom and while it was installing he disconnected the cable, the screen is a black background with green arrows and a phone. I'm not familiar with this but when i press the power button and down button it says unlocked at the top. When i tried to install the stock rom it keeps coming up with no image.
Is there a way to fix this? Thanks in advance
Was he trying to make it s=off? When I did that on my phone that happened, and it is easy to fix. Ask your brother first, but if he was trying to get s=off, all you have to do is get the leaked ICS image from the dev section and flash it. Download the file from here: http://forum.xda-developers.com/showthread.php?t=1615164&highlight=leak, rename it to PH85IMG.zip and put it on the external SD card, then boot into the bootloader and press the up volume button when it asks if you want to update. However, this only works on T-Mobile phones.
I tried that a bunch of times already but every time it starts checking and at the then it just says no image and goes back to H boot
Edit: It is a T-Mobile phone
Sorry, I just reread your original post, your bootloader has to be locked to flash the file, so boot into fastboot and run "fastboot oem lock" from your computer's command prompt.
I just tried it and it gets stuck on "waiting for device" and I don't know if it makes a difference but something happened with his SD card and my computer couldn't read it so I had to reformat it and its empty right now
If that doesn't work, I am not sure what can be done. I wouldn't think the SD card would matter, but make sure you formatted it as FAT32, just in case, and leave the zip file off of it, go into bootloader and use the volume buttons to go to fastboot, and click the power button to select it, then plug it into the computer. If it then says fastboot usb I would think the oem lock should work, but if that fastboot usb doesn't come up, there might be something wrong with the whole boot loader or something. Sorry I could not help any more.
I went into fastboot and connected the USB cable and it didn't change, it still just say fastboot highlighted in red
I have no idea what you could do to fix that, then. Again, I apologize that I couldn't help more, and I wish you the best of luck with this.
Thanks for trying to help anyway
edit
Adb debugging wasn't on I bet :banghead:
I don't get how he got in this position. I don't use a cord to install ROMs. If he were to unplug, I don't see what that would do except stop charging... Unless he was in disk mode and it caused a bad unmount and corrupted card.
I would try the steps above with a fresh sd card and it should work. Redownload the ics or gingerbread ruu and go through the steps.
He was in the process of flashing his phone with some rom he wanted but then somehow he accidentally disconnected the USB cable and it froze up. Now every time you turn the phone on, after the HTC screen it shows the picture that its being flashed (black background with green arrows going into the phone) so I can't turn the phone on at all but I do know that his phone had usb debugging on before he flashed it.
Ok so I found out he was actually trying to get S-off with some "wire trick" and he said at the beginning of the process the phone was restarting and he accidentally unplugged the usb and when the phone rebooted, it got stuck in the dark screen with the green arrows
This just means he needs to continue trying the wire trick. I was stuck at the screen too. I just kept running the program and attempting the wire trick until I got it right.
Sent from my HTC_Amaze_4G using XDA
I just tried the wire trick and it got all the way to counting 45 seconds and the phone keeps rebooting. So I tried to run the program again and now it says connect device and install drivers
Is there a way to get this phone to work again?
Djordje1000 said:
Is there a way to get this phone to work again?
Click to expand...
Click to collapse
install htc drivers, thats also why it didnt read the fastboot demands
I did I installed one from the htc website for the amaze 4g and one that someone posted on this forum
Djordje1000 said:
I did I installed one from the htc website for the amaze 4g and one that someone posted on this forum
Click to expand...
Click to collapse
i dont know what to say then :/ mabey the computer cant read the amaze
Since I can't get past the htc screen. The computer wont recognize that the phone is connected to it
I has a similar problem when trying to do s-off - try installing htc drivers again after plugging in the usb.

[Q] ONE Max stuck on "HTC ONE" screen...

I was doing a backup with TWRP and everything seemed to go just fine. Then after a reboot i unlocked the phone to notice that it was leaving the lock-screen icons on the bottom of the page. I still had access to my notification bar and could clear notifications. Figuring that there had just been a mistake in the boot process, I held the power button to restart the phone. Well it never brought up my power menu to restart. Also instead of making me wait ten seconds until it flashed its lights and restarted, it just restarted in like 3 seconds. Now my phone is stuck on the HTC ONE screen and will not respond to anything including hold the power button.
My phone is rooted an s-off. I know that I have not posted at all on here, but I have been rooting and know how at least the basics on adb shell. I just have never had a phone lock up to this point. If I can at least get to recovery, I should have 2 or 3 backups to run. I just don't want to have to wait for the phone battery to die just to hope I can get to recovery.
TugboatTony said:
I was doing a backup with TWRP and everything seemed to go just fine. Then after a reboot i unlocked the phone to notice that it was leaving the lock-screen icons on the bottom of the page. I still had access to my notification bar and could clear notifications. Figuring that there had just been a mistake in the boot process, I held the power button to restart the phone. Well it never brought up my power menu to restart. Also instead of making me wait ten seconds until it flashed its lights and restarted, it just restarted in like 3 seconds. Now my phone is stuck on the HTC ONE screen and will not respond to anything including hold the power button.
My phone is rooted an s-off. I know that I have not posted at all on here, but I have been rooting and know how at least the basics on adb shell. I just have never had a phone lock up to this point. If I can at least get to recovery, I should have 2 or 3 backups to run. I just don't want to have to wait for the phone battery to die just to hope I can get to recovery.
Click to expand...
Click to collapse
Are you saying volume up + power button does not restart your phone nor does any help? Check if your phone is detected in computer and if so you can issue and adb reboot command
also since there is no removable battery HTC added a reboot function press home vol down and power that should do the trick
The phone is not detected by a computer, nor will it charge. Vol down and power is not cutting it off. Right now I am waiting for the battery to die so I can hopefully boot into recovery and do a restore.
Vol up + Power was the key. I was thinking it was volume down. Thanks for all your help
TugboatTony said:
The phone is not detected by a computer, nor will it charge. Vol down and power is not cutting it off. Right now I am waiting for the battery to die so I can hopefully boot into recovery and do a restore.
Click to expand...
Click to collapse
Its volume up mate + power not volume down
pradeepvizz said:
Its volume up mate + power not volume down
Click to expand...
Click to collapse
Hi Do you have a HTC one max stock Rom I could use??
Thanks
mini88448 said:
Hi Do you have a HTC one max stock Rom I could use??
Thanks
Click to expand...
Click to collapse
There have been lots of request for this, ill upload a stock rooted ROM soon.
pradeepvizz said:
There have been lots of request for this, ill upload a stock rooted ROM soon.
Click to expand...
Click to collapse
OMG THANK YOU SO MUCH!!!
:victory::victory::victory:
Just wanted to point out I ran into this issue also (Stuck on white HTC boot screen) after wiping my ROM and Vol UP + Power did the trick for me also (and then Vol Down + Power to get back to the bootloader).
i need help, guys
so attempting to install a new rom, i must have dont something wrong because now restarting the phone will leave me on the htc logo loop and restart. i still have access to hboot and fastboot. but when attempting to load into twrp, it shows the team win logo for half a second and then restarts the phone. then i installed cwm and it does boot into it but whatever option i pick, install zip, wipe data, ANYTHING, restarts the phone.
i have no idea what to do. i tried installing a rom using adb sideload but it stops at around 80%, ive tried installing different versions of twrp and cwm and same thing. i think it is bricked. im using the verizon htc one max. the only option i see left is the ruu toolkit but ive only been able to find the sprint version and then it says that bootloader needs to be locked and i have not idea how to do that from hboot, fastboot, or cwm
attempting to install superuser also fails
if there's anyone here that can help, please, any suggestions will be appreciated. thanks =:laugh:
Sounds like you're flashing the wrong TWRP.
Sent from my Galaxy Nexus using Tapatalk
suieitori said:
so attempting to install a new rom, i must have dont something wrong because now restarting the phone will leave me on the htc logo loop and restart. i still have access to hboot and fastboot. but when attempting to load into twrp, it shows the team win logo for half a second and then restarts the phone. then i installed cwm and it does boot into it but whatever option i pick, install zip, wipe data, ANYTHING, restarts the phone.
i have no idea what to do. i tried installing a rom using adb sideload but it stops at around 80%, ive tried installing different versions of twrp and cwm and same thing. i think it is bricked. im using the verizon htc one max. the only option i see left is the ruu toolkit but ive only been able to find the sprint version and then it says that bootloader needs to be locked and i have not idea how to do that from hboot, fastboot, or cwm
attempting to install superuser also fails
if there's anyone here that can help, please, any suggestions will be appreciated. thanks =:laugh:
Click to expand...
Click to collapse
May I suggest following these instructions?
http://forum.xda-developers.com/showpost.php?p=51753483&postcount=129
If you're able to complete those instructions outlined in that post, this should set you up with the latest HBOOT, Radio and TWRP (Recovery) for the Verizon HTC One.
Make sure you read the post fully before you start, especially this part:
fastboot flash zip firmware.zip (Be sure it finishes saying 'successful', not 'please flush again immediately'. If it says the flush again, rerun the command)
If you succeed in getting that done, see if TWRP still causes the phone to reboot and get back to us.

soft bricked my phone... desperate for help..

alright guys, so here's the story. just yesterday i bought a brand new lg v10, got it home and the first thing i did was root the device and used ADB to load TWRP following the instructions here on SDA to a T for the ROOT/RECOVERY setup. and it worked. all was fine and dandy, the first time i booted into TWRP via ADB after root i got in, flashed a debloated ROM + xposed and again, everything went fine.. loaded into the OS of the new ROM, went through setup, turned on USB debugging, clicked always allow this computer, installed xposed app yadayadayada. I then, using ADB again, loaded into TWRP. i created a backup there just in case something went wrong with the changes i was about to make and once the backup was complete i loaded back in to the OS. at this point i thought i had done everything right and was confident that if i made system changes that didn't work out i could just flash the phone with TWRP from the backup i made. right? WRONG! ...apparently... so anyways, i made my first change, which was to use a NONROOT app called texdroider or whatever to change my DPI (as i have done with a couple phones previously without much issue) but i didn't take into account that stupid second screen... making the DPI changes system wide, as i'm sure those of you that know this phone are aware, causes the systemUI to crash with an error.. making the OS unusable.. so i tried to load into TWRP by holding the volume down and power button.. but instead it just booted me to the factory recovery.. not TWRP... the phone is unusable within the OS, i can't get the phone to connect to adb to boot into twrp as i had previously, i can't seem to get the phone into download mode, and i can't boot to TWRP and the OS is junk at this point.. but it DOES say on the "LG" screen that the bootloader is unlocked so i'm really hoping i'm not completely out of luck.. but i am not sure what to do at this point. does anyone here know of anything i can try to get into a custom recovery at this point? if i could get into TWRP my SD card in the phone has a backup, the original image, not to mention i could pull the SD card and add anything i need via my pc and then boot back to twrp etc etc and i would have no issue fixing the phone... i really don't understand what i did wrong or why i can't boot to my custom recovery but i'm at a loss.. i'm just looking for a way to force the phone into a custom recovery... or restore the original factory image.. if you have any advice at all i would really appreciate it.
Thanks for reading
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
ngoblirsch said:
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
Click to expand...
Click to collapse
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
Click to expand...
Click to collapse
it was a screen asking me to do a factory reset, i click yes, it asks to confirm, i click yes again and then it "successfully" factory resets my phone... it shows the android factory reset symbol that its resetting, then says that its "optimizing apps" and goes through that whole process.. but when it finally loads the "welcome" screen (so i know for a fact that some sort reset has taken place) i get the same "systemui has crashed" error and the OS is unusable and won't connect to my computer.. idk why i can't access TWRP.. i booted to it 3 times before this happened, though never by the hardware buttons on the phone.. everytime i booted to TWRP i had used ADB to boot to TWRP.. what makes me the most sad is that i have a nandroid backup on my SD card... but i can't flash it without recovery.. which i can't install on the phone without getting into the OS..
is there any way to install TWRP or even boot to a temporary TWRP so that i can do so? if i can flash my nandroid i'm saved.. if i can get into a custom recovery i'm saved.. if i can find a .kdz file to flash, i'm saved... if i can get my phone to be recognized by my computer/adb i'm saved.... there simply has to be a way to unbrick this phone...
ZDeuce2 said:
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
well i seem to have somehow NOT installed TWRP correctly because it just proceeds to factory reset my phone.. which for some odd reason doesn't reset the DPI... leaving me stranded... is there any way to get ADB to see my device in its present state? my computer makes the device recognition noise when i enter download mode and i can see it in device manager but not my computer or ADB
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
YrrchSebor said:
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
Click to expand...
Click to collapse
dude.. then what good is a factory reset?!? like seriously... and yeah, i tried that but i can't get adb to connect in download mode.. the device doesn't show up when I type "adb devices" like it did when i first rooted it. ... and i thought i followed the instructions exactly as it was laid out from this link.
http://forum.xda-developers.com/tmobile-lg-v10/general/guide-how-to-root-lg-v10-easy-t3274699
i think somewhere in there i must have missed something and ended up only booting into twrp temporarily.. which is certainly possible since i never boot to twrp during that initial process from the hardware keys or soft keys.. always through adb.. the phone was already plugged in.. typing the command was a couple keys away..
is there anyway to get TWRP on to the phone now? or am i screwed :'(
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
YrrchSebor said:
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
Click to expand...
Click to collapse
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
ZDeuce2 said:
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
@ngoblirsch Along with the information provided in these suggestions and what you have said, you need to reinstall your LG/fastboot drivers on your PC while in fastboot mode
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
Well I appreciate the encouragement, it sure seems to have helped! Issue has been resolved. ended up that i just didn't know the hardware key combination to get to the bootloader/fastboot mode without being already connected to adb. nothing that i could find online said to hold volume down while plugging it in to a computer. as soon as i was able to do so i connected to adb and it was a breeze from there; I am now back with an OS AND a customer recovery properly installed on the device!! I will be hanging around these forums for as long as i have this phone so i'm sure i'll bump into you guys! absolutely love the community here on XDA, you guys are freaking awesome!!
ngoblirsch said:
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
Click to expand...
Click to collapse
Glad you got it fixed, and welcome to the V10 device and forums!

Categories

Resources