WARNING: THIS METHOD CAN BE DANGEROUS. DON’T DO ANYTHING IF YOU DO NOT KNOW WHAT YOU DO.
I AM NOT RESPONSIBLE IF YOU TRANSFORM YOUR N1 INTO A BRICK
.38.8 zKernel
This kernel is based on IR+Evervolv.
Recommendation
SmartAssV2 254-1130Mhz
BUGS
test it
DOWNLOAD
.38.8 zKernel #21 :: BFS :: 2011-12-30
Remember to +(Thank) when downloading kernel
Sources #21 (will update when possible): https://github.com/zyr3x/ics-zkernel-passion
Changelog:
2012-01-12:
Include modules : сifs,tun
Enable: DMA, BFQ hierarchical scheduling support
2012-01-07:
Reconfig kernel options
enable AXI
Speed up the GPU ( Quadrent: 3D 340 -> 385; FPS ~9fps -> ~18fps ). Smoother operation CM9.
fix critical bug with bootloop(crash data)
2012-01-02:
rebase all sources on iR
2011-12-30 #21:
update video, gpu, kgsl (ir-kernel)
2011-12-28 #15:
update blk-lib
add / enable sio-iosched
enable cfs-iosched (default)
2011-12-26 #14:
add SmartAss
update CPUStats
update Ondemand
update kernel classes
2011-12-25 #11:
update CPUSET
update POSIX_TIMER
update RCUTINY
2011-12-25 #10:
added CPU governors:
Lazy
InteractiveX
Savaged-Zen
SmartAssV2
Flashing now, will report back with results!
thanks
Does this mean what I think it does?
Are we able to get HW acceleration soon?!
No. This is based off the one included in the ics Tom if I looked correctly.
Sent from my Nexus One using XDA App
zyr3x said:
.38.8 zKernel
2.6.38.8, 256-1036 (base on Evervolv-Perdo-2.1.0p2-passion)
Changelog:
2011-12-25 #11:
update CPUSET
update POSIX_TIMER
update RCUTINY
2011-12-25 #10:
added CPU governors:
Lazy
InteractiveX
Savaged-Zen
SmartAssV2
Click to expand...
Click to collapse
Thank you for sharing. Will this work with MIUI ROM?
eidros said:
Thank you for sharing. Will this work with MIUI ROM?
Click to expand...
Click to collapse
Need test. I don `t know
Where is boot.img? so i can to use with fastboot.
Battery drain on #11 seems a bit faster...a little less lag on app processing but still only problem is the lack of msm 3.0 kernal. Good improvement for the time being
Sent from my Nexus One using XDA App
Forbearance. I think we will find common effort to solve this problem
fjnty5 said:
Battery drain on #11 seems a bit faster...a little less lag on app processing but still only problem is the lack of msm 3.0 kernal. Good improvement for the time being
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
How about battery drain on #14?
---------- Post added at 05:03 PM ---------- Previous post was at 04:53 PM ----------
btw, i did one boot.img http://mup5.com/40393 (for texasice's rom)
u need extract bcm4329.ko and push by yourself.
Thanks OP
File appears to be a zip file, however when I try to install it it does not show up as a zip and I can not install. Is anyone else experiencing this?
NVM.....seems to be correct now.
Quadrant
j00m said:
How about battery drain on #14?
---------- Post added at 05:03 PM ---------- Previous post was at 04:53 PM ----------
btw, i did one boot.img http://mup5.com/40393 (for texasice's rom)
u need extract bcm4329.ko and push by yourself.
Thanks OP
Click to expand...
Click to collapse
.38.8 zKernel #14 vs Tiamat-Drews 2.1.0p3
1157 vs 1077
wait next release...
Works great, but there is one thing I miss... Could you please add SWAP support (so we can use a2sd reswap with DT A2SD?) It would be a great help!
Thanks,
Zeboo
zyr3x said:
.38.8 zKernel #14 vs Tiamat-Drews 2.1.0p3
1157 vs 1077
wait next release...
Click to expand...
Click to collapse
as default or need to use setcpu things? and what are the number? 1157 vs 1077
btw, I made boot.img & split bcm4329.ko from OP for Evervolv-Perdo-2.1.0p3-passion ROM of texasice: http://mup5.com/40767
Quadrant scores.
Sent from my Nexus One using xda premium
ctfrommn said:
Quadrant scores.
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
thanks.
j00m said:
as default or need to use setcpu things? and what are the number? 1157 vs 1077
btw, I made boot.img & split bcm4329.ko from OP for Evervolv-Perdo-2.1.0p3-passion ROM of texasice: http://mup5.com/40767
Click to expand...
Click to collapse
Max point on SmartAssV2 1036-245
zyr3x said:
Max point on SmartAssV2 1036-245
Click to expand...
Click to collapse
does i need setcpu? or u config as default!
Please give some guide for newbie as me.
I use my soft CKZTools.apk v 1.4.4 ICS Profiles )
Related
New UPDATE 13-07-2012: Youtube fixed, CleanCache include, Gov Optimisation, include Interactive Sched., remove SIO Sched (unstable ATM) => PLEASE REPORT
Hi guy,
I would like to share my work and try to see if my hardware is limited to OC.
I can OC with great stability to 1080 and 1100 with little crash (after 2 days of use). 1150 and 1200 no boot.
Kernel include:
-Based on 2.4.83 Archos kernel
-SIO - BFQ Schedulers include - BFQ by default
-Lagfree and MinMax CPU Governor include Conservative by default
-OC to 1100/1150 with 300/600/900/1010/xxxx step Frequency
-OC to 1200 with 300/600/1000/1100/1200 step
-Ext4 - you can applied WhoDunnit's tutorial
-Jenkins hash support update (less CPU consumption)
-Completely Fair Scheduling (CFS) upgrade better stability
-Others tweaks (I don't remember all ^^)
You can choose step, SIO, CPU Gov. with Voltage control.
The kernel is compatible with A43 - A70S/H/IT/IT2 - A101 and works well on BULL RC or Original Firmware from Archos. I CANNOT TRY IT WITH URUKDROID (My device hasn't same partitions :s).
You can download Kernels here:
V0.1 => 1100MHz: http://www.mediafire.com/?421uilfwbhx2em3
V0.1 => 1150MHz: http://www.mediafire.com/?u9bx28132jwln0c
V0.1 => 1200MHz: http://www.mediafire.com/?ta2f7m64d7aor4j
UPDATE:
V0.2b => 1000 Swap is useless on ours devices and compcache need more ram. I upgrade the voltage of CPU, and try to oc to 1200
UPDATE:
V0.3 => SEE LAST POST (kernel are attached on it)
How to use:
Just rename it to zImage and install it with your favorite initramfs.cpio.gz ( Bull or Archos) on SDE Menu.
I AM NOT RESPONSABLE IF YOU BRICK YOUR TAB. Thanks .
Kernel works fine on my tab, but i can't assure that's similar on others tabs.
Sources:
https://github.com/bizcuite/Archos_GEN8_OC_KERNEL_5STEP_FREQ_TWEAKS.git
Bizcuite
WORK IN PROGRESS ACTUALLY:
-GPU OC => think that the freqs are hardcoded by register (see OMAP3630 doc)
-GPU OC => BUS MEMORY OC, but don't know if it works in reality.
-STABILITY IMPROVE => Clean the code!!!!!!
-YOU TUBE WORKS
For PowerUser:
[email protected]:~/WORKING_DIRECTORY# make CC=gcc-4.4 CXX=g++-4.4 -j4
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.0.4
TARGET_PRODUCT=full_archosg8
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=linux
HOST_BUILD_TYPE=release
BUILD_ID=IMM76K
============================================
Thanks mate, been looking for OC for a long time.
Mavasilisk said:
Thanks mate, been looking for OC for a long time.
Click to expand...
Click to collapse
Say me if you have any pb at 1150 and 1200Mhz please
I must clean the code and undo modifications to oc gpu (it is oc to 230Mhz and memory bus but it doesn't worked).
I find the 3d perf bad.
Bizcuite
Sent from my openAOS Build of Android 2.3 (cyanogenmod edition) using xda app-developers app
Are you planning future improvements? I can help you testing it. Glad to see improvements for our devices.
I will try it later and tell you the results, going to try all of the kernels and check the stability.
EDIT: The device didnt boot with 1200 zImage.
EDIT #2: A question out of the topic. Is using swap going to kill my SD card faster?
Mavasilisk said:
Are you planning future improvements? I can help you testing it. Glad to see improvements for our devices.
I will try it later and tell you the results, going to try all of the kernels and check the stability.
EDIT: The device didnt boot with 1200 zImage.
EDIT #2: A question out of the topic. Is using swap going to kill my SD card faster?
Click to expand...
Click to collapse
I have made this kernel because archos stop dev of ours devices. I am not a great dev lol, i haven't developped code since 10 years . But i have a brain, and try to use it
I would like port LiveOC code to our device, it exists for i9003 equiped with omap3630 but the code to select frequency is very different, i don't know if i can do this.
And port Smartass2 governor. The code is included in the kernel but desactivated i have lot of errors.
I try to oc gpu ATM, without result...i think that the freq is cable in the hardware...
My purpose is to know if ours devices can go up to 1100Mhz with the actual code. I need tester :thumbup: !
OC stability can changed for each devices.
Edit: Is it stable with 1150? I have crashed when i used wifi strongly. Like a big dl.
Verify that you have all frequency active with voltage control.
Edit2: i think that you will have changed of tablet before the sd die
Bizcuite
Sent from my openAOS Build of Android 2.3 (cyanogenmod edition) using xda app-developers app
I will check 1150 when my tab is fully recharged. When I disconnect it when its half charged the calibration goes crazy.
Thank you very much for this.
john9 said:
Thank you very much for this.
Click to expand...
Click to collapse
Can you make me a report of your experience with the kernel please?
Thanks in advanced!!
Bizcuite
I tested all the zImages as I said and the results are:
1100 is stable without any problems.
1150 isnt stable with many problems, the first time the boot hang on OpenAOS logo. The second time I couldnt enter settings. The third time it hang when I entered settings.
1200 doesnt boot at all. Reboots on OpenAOS logo.
Keep up the good job, dont get disappointed.
@bizcuite:
What vsel's are you using for the frequencies?
I know from the Milestone that we had a wide variation of vsel's that where working on diff devices.
If you look into the oc posts here you see that ( when we had that on from sibere ) vsel=80 was working for many at 1200MHz
fzelle said:
@bizcuite:
What vsel's are you using for the frequencies?
I know from the Milestone that we had a wide variation of vsel's that where working on diff devices.
If you look into the oc posts here you see that ( when we had that on from sibere ) vsel=80 was working for many at 1200MHz
Click to expand...
Click to collapse
I use 64 (0x40) ~= 1.38v. I will try differents steps to OC to 1200 my Tab.
I have seen a table of vsel by freq on TI website, i must find it again!!
Thanks for information
Edit: i have tried it with 75 and 80, no boot at 1200....
Bizcuite
First its nice to see a dev taking care of our tablet
And thank you so much for that !
I've just formatted my tablet (was having lags and lots of crashes) and installed your kernel over OpenAOS (the last non-official build) and wahouh !!
So smooth !
I've installed the 1100MhZ, I'll run it for a day and after I will test 1150 and 1200
Thanks again dude !
NEW UPDATE: CompCache and Swap Enable
NEW UPDATE - SEE FIRST POST:
CompCache and Swap enable by default
1 GHz ONLY FOR TEST
1000 - 1100 - 1150 - 1200 - released later if test are good!!
EDIT: if you want to see if Swap is active just download terminal emulator on android market and tape: free
PLEASE REPORT IF IT WORKS ON YOUR TAB.
Edit2: swap doesn't work and is useless :thumbdown:
Bizcuite
Thank you Bizcuite for your kernels. I tested your 1100 kernel on my A70 running cm7-bull and the speed was very good. I have found the kernel seems to break something with video streaming apps. TvCatchup, Vulkano and Youtube (LQ and HQ video) all fail to work but work fine with the original cm7-bull kernel.
darren1 said:
Thank you Bizcuite for your kernels. I tested your 1100 kernel on my A70 running cm7-bull and the speed was very good. I have found the kernel seems to break something with video streaming apps. TvCatchup, Vulkano and Youtube (LQ and HQ video) all fail to work but work fine with the original cm7-bull kernel.
Click to expand...
Click to collapse
Ok. Ty for te report, i will clean the code and redo the gpu modification. I have too lag on game or bench.
Bizcuite
Sent from my openAOS Build of Android 2.3 (cyanogenmod edition) using xda app-developers app
is the swap reall needed if we have VM and CompCache?
Mavasilisk said:
is the swap reall needed if we have VM and CompCache?
Click to expand...
Click to collapse
Right!!
After read this article from Wiki, we don't need this: http://wiki.cyanogenmod.com/wiki/Swap_and_Compcache.
Swap and compcache are disable and code is erase.
I will upload a new version with better VSel values and original GPU driver (It was a test with i9003 driver and OC :silly: ).
Bizcuite
Ok. Waiting for you to upload the updated zImage as it seems I have a day off.
EDIT: Lets reach 1.5GHz
Bizcuite could you upload your sources to github please?
And what does that mean ? (on hte build config)
PLATFORM_VERSION=4.0.4
Click to expand...
Click to collapse
minidou-77 said:
Bizcuite could you upload your sources to github please?
And what does that mean ? (on hte build config)
Click to expand...
Click to collapse
I will do that when i know how do this LOL (don't bite me please ). I have never used Git or gitorious to upload the code by lake of time (My familly and work takes lots of time ^^ ).
4.0.4 because of i try to compile ICS 4.0.4-R2.1 for A70S2 from google source
I must again clean the fu**ing code before upload it
UPDATE NEWS: Kernel doesn't work well, the return of deep sleep take lots of time (5 sec)... I have modify the boot frequency, and i think that's the pb...wait, maybe tomorrow.
Bizcuite
Latest update
- Uploaded V0.8 (see changelog below for changes)
FlyKernel
Its purpose:
- Smoothest experience possible
- Stay as close to stock as possible
- Only the most useful governors, io scheds and tweaks will be included
- Let the users have input on features
- But most important of all: Let the Ray Fly.
Features
- Works with al .431 and .587 based roms (miui also). I recommend a .587 based one.
- OC up to 1.6 Ghz and undervolting (Arc S frequency table, with some added freqs)
- Build with linaro 4.7.2 (aug 2012) and board specific flags
- Kernel: 2.6.32.59 (2.6.32.9 is still available in v0.5)
- SmartassV2 and SavagedZen (recommend smartassv2)
- Noop, deadline, SIO and CFQ (recommend noop)
- Ext 3/4 and NTFS support
- Two way call recording
- OTG
- SLQB
- TinyRCU
- Zram (as in stock)
- Init.d support
- Tweaked
- WiFi embedded in kernel
Download
Download:
http://www.mediafire.com/?pxbbksjdbs16s
Install
Flash Tool OR
fastboot –i 0x0fce flash boot flykernel0_8.img
Changelog
Code:
V0.8
- Switched to ARC S freqs (Added 2 extra, 134 and 1,6; so i hope everybody is happy)
- Optimized cpu freqs at boot
- Longer battery (less voltage and less high freq hungry)
V0.7d
- Updated two way call recording
V0.7c
- Added undervolting (use setxperia)
- Fixed cpu freq at boot (now 1 ghz)
V0.7b
- Implemented fuse driver again (accidently removed in 6 and 7)
V0.7
- Disabled around 30 config flags, about debugging and not necessary stuff.
- Reduced img size to just 5mb in stead of 11mb (both kernel and ramdisk are smaller)
- Smaller memory footprint and increased performance
- Added version to kernel version string
- Small update to OTG
V0.6
- Redid bootscreen
- Completely redid cpu frequencies (partly based on doomlord and sirkay)
- Changed some strings in mkcompile_h
V0.5.59
- Went trough the long and tedious process of
patching up to 2.6.32.59 kernel (v0.5 is 2.6.32.9)
V0.5
- Recompiled wifi modules using linaro
- Add tinyrcu for smaller memory footprint
- Fixed SLQB allocator (wasnt enabled properly in previous versions)
- Made size kernel smaller
- Changed some build flags
v0.4B
- Small cpufreq fixes
v0.4
- Switched to latest Linaro (faster) and used other build flags
- Updated OTG support
V0.3
- Vsync enabled for smoother UI
- Better OTG support (needs testing)
- Switched to SLQB allocator
- Ramdisk optimization
- Small tweaks in kernel
V0.2
- Added SavagedZen governor
- Added SIO and CFQ IO schedulers
- Ext 3/4 and NTFS support
- Fixed two way call recording quality?
- WiFi embedded in kernel
- Probably something more..
- Small tweaks
V0.1B
- Resized bootlogo
- Added WiFi modules to kernel (no need to flash modules seperately)
V0.1
- Initial release
- OC up to 1.6 Ghz
- Init.d support
- Smartass V2 Governor
- Lots of small Tweaks
Bugs
Code:
[B]Fix for usb storage to pc (if not working for some reason,
for example on jellysandwich)[/B]
- Connect usb cable
- Disable/stop HDMI in settings->app->all
- Disconnect
- settings -> xperia -> usb con ->Disable companion message
- settings -> xperia -> usb con ->Switch to the usb mode
which is not set (dont remember if it was msc or mtp)
- Connect
- Disconnect
- Switch to MTP mode
- Connect
- Disconnect
- Switch to MSC mode
- Then it worked for me for some reason..
If its not working just switch a couple of times between mtp and msc
and reconnect cable couple of times
In the end it shoulld be working in MSC mode.
[B]Only for V0.1[/B]
- If wifi is not working:
- Backup original modules (rename /system/lib/modules
to /system/lib/modulesbak)
- Flash updatewifi-signed.zip via recovery OR
- Push the contents of the
modules.zip to /system/lib/modules/ (first delete the original files)
Support me
I dont host on moneymaking sites, because they are slow so;
Feel free to help my buy a new HTPC and donate :victory: or at least hit Thanks.
Thanks to
- Doomlord
- Sirkay
- FXP
I think this new kernel is only for stock based rom, anyone try that?
thomas1991_12 said:
About me
I´m a new developer for the Ray. I come from the LG gt540, for which I created TWRP ports (only touch recovery for the device).
I have now created a kernel based on the 4.1.B.0.587 sources by Sony.
It´s called:
FlyKernel
Its purpose:
- Smoothest experience possible
- Stay as close to stock as possible
- Only the most useful governors, io scheds and tweaks will be included
- Let the users have input on features
- But most important of all: Let the Ray Fly.
At the moment its very smooth and gets around 4000 in antutu (smartassv2 1,4ghz).
Let me know what you guys want in the kernel, which governers, which IO schedulers etc. I want to keep it as minimal as possible.
Install
Flash Tool OR
fastboot –i 0x0fce flash boot flykernel0_1.img
Changelog
Code:
V0.1
- Initial release
- OC up to 1.6 Ghz
- Init.d support
- Smartass V2 Governor
- Lots of small Tweaks
Bugs
Code:
V0.1
- If wifi is not working:
- Flash updatewifi-signed.zip via recovery OR
- Push the contents of the
modules.zip to /system/lib/modules/ (first delete the original files)
Support me
I dont host on moneymaking sites, because they are slow so;
Feel free to help my buy a new HTPC and donate :victory: or at least hit Thanks.
Thanks to
- Doomlord
- Sirkay
- FXP
Click to expand...
Click to collapse
I also come from the LG gt540,haha~
I will try it with jj and report back.
Sent from my ST18i using xda app-developers app
Maybe can you implemented UV features in your kernel?
Thanks for the kernel.
Sent from SEMC Xperia™ ray via Tapatalk 2
well done. new developer coming in .. keep up good work
btw better ask them to backup stock modules just incase
thomas1991_12 said:
Bugs
Code:
V0.1
- If wifi is not working:
- Flash updatewifi-signed.zip via recovery OR
- Push the contents of the
modules.zip to /system/lib/modules/ (first [B]rename[/B] the original files to [B]modules2[/B])
Click to expand...
Click to collapse
nice work bro,
sooooo long using sirkay 7.1.431 , my hand itching wanna try others kernel. seems your at the door ...will report back later
Hi thomas welelcome to the ray family can u try cm9 the latest one cuz i found one problem.is related to kernal...when i turn off the lockscreen den after few minutes i wan to use then i press the power button the lockscreen takes few second to show...it kinda annoying so can u try make a kernal for that?i dont have that problem in jj rom
Sent from my ST18i using xda premium
Im focusing on this kernel first. Ive only tested it with stock 587.
Probably gonna release an update today.
cxj1995 said:
Hi thomas welelcome to the ray family can u try cm9 the latest one cuz i found one problem.is related to kernal...when i turn off the lockscreen den after few minutes i wan to use then i press the power button the lockscreen takes few second to show...it kinda annoying so can u try make a kernal for that?i dont have that problem in jj rom
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
r u sure it is kernel related? i dont see any file that can build for lockscreen in kernel sources.
Sent from my ST18i using xda premium
Nice at last we got sirkay's successor But i think i;ll wait for the next version, the wifi problem-less one keep up the good work!
hansip87 said:
Nice at last we got sirkay's successor But i think i;ll wait for the next version, the wifi problem-less one keep up the good work!
Click to expand...
Click to collapse
No problems with Wi-Fi, just use provided modules.
Sent from my ST18i using xda app-developers app
hansip87 said:
Nice at last we got sirkay's successor But i think i;ll wait for the next version, the wifi problem-less one keep up the good work!
Click to expand...
Click to collapse
Ya... I will also go with the next release!!!
Sent from my ST18i
thomas1991_12 said:
No problems with Wi-Fi, just use provided modules.
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
Not that I doubt the first version, I just want to have a really clean kernel installation. Just like you intended the mod to be, as close as stock one
Sent from my ST18i using xda app-developers app
you can add wifi modules in kernel. check my git, there's kernel ramdisk that can load modules on boot. just put your modules in right folder.
Sent from my ST18i using xda premium
sirkay said:
you can add wifi modules in kernel. check my git, there's kernel ramdisk that can load modules on boot. just put your modules in right folder.
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
Yeah, only disadvantage is that the ramdisk will get pretty big.. But I think ill do that in next release. And new govs and io scheds. Btw where can i find incremental kernel patches?
Sent from my ST18i using xda app-developers app
trying on pureness 10
seems working but I had to patch wifi
thanks
Hi!
Is this kernel support the two way call recording?
run this one (and updated wifi module) with jj 3.3 and a lot of minor mod, still fine until now.
Pretty fine kernel. I will donate when I get my payment via paypal
PS: the flykernel text in boot too slim, a bit hard to read to me.
sirkay said:
r u sure it is kernel related? i dont see any file that can build for lockscreen in kernel sources.
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
Yes i do...u try compare jj and cm9...cm9's lockscreen will take a few second and jj rom dont have that problem
Sent from my ST18i using xda premium
Presenting...
neXusKERNEL
with SWEEP2WAKE (alpha)
by neXusPRIME
CHANGELOG:
V4.0
1. Sweep2Wake........ do you want anything else??? :highfive::highfive:
It is in alpha mode, so dont blame me for bugs, use v3.
Click to expand...
Click to collapse
V3.0
1. USB Fast Charge. For details see: http://forum.xda-developers.com/showpost.php?p=45743315&postcount=65
Click to expand...
Click to collapse
V2.0
1. Added "BFQ Scheduler", my favourite
2. Added experimental GPU OC
Click to expand...
Click to collapse
V1.0
1. HTC Write protection disabled.
2. Enabled swap support.*
3. Added scheduler "sio"
4. Added Smartassv2 governor
5. HTC perflock disabled
6. Enable KSM support (Flash zip in link to enable KSM http://forum.xda-developers.com/showpost.php?p=38569436&postcount=8)
7. No modules needed, everything inside boot.img
8. Init.d supported. Use app in link to verify init.d support http://forum.xda-developers.com/showthread.php?t=1933849
Click to expand...
Click to collapse
Click to expand...
Click to collapse
DOWNLOADS (JB):
V4:
http://d-h.st/j9E its ALPHA, you have been warned
V3:
http://d-h.st/84i
V2:
http://d-h.st/zuB
V1:
http://d-h.st/3UP
Click to expand...
Click to collapse
OLD ICS VERSIONS:
V3: http://d-h.st/7C6
OLD VERSION: V2: http://d-h.st/HcS
OLD VERSION: V1: http://d-h.st/dOq
SOURCE:
https://github.com/ProtoU/neXusKERNEL
CREDITS
atis112 - for My 1st ClassRoom
cybojenix - for S2W
galaxyfreak - for S2W
helicopter88 - for S2W
zarboz - for S2W
franco-c - for USB Fast Charge
cute_prince - for OC attempts, not final yet
KonstaT - for general performance patches
and maybe a few others
Click to expand...
Click to collapse
@neXus PRIME
Thanks for your great effort.
Here is my findings :
Features:
1. HTC Write protection disabled.
This works great Removed both wp_mod2.ko & init.d script to load it... I can confirm the HTC write protection now disabled.
Updating busybox with no problem
2. Enabled swap support. (if you make a swap partition, it should get used. But need testers)
I don't need this feature, so I don't test it.
3. Default scheduler "noop" (I've always liked noop better then all others)
"noop" as default is shown in the attached screenshot
4. HTC perflock disabled (SetCPU does some magic when perf lock is disabled. Test n report)
No idea how to test this
5. Default Min set to 245 Mhz (My liking)
I like 245 Mhz too but I don't see it in both No Frill and CPU Spy (see attached screenshot)
6. Enable KSM support
Don't really need it but will test later with my old KSM init.d script
7. Default governor "ondemand" (later you can select whatever you like e.g
smartassv2)
"ondemand" is shown as default.
8. Ext2/ext3 file system support. (testers needed)
Don't need this so I do not test
9. Aren't above enough ???
Well... it's enough for now... maybe later s2w feature ? Maybe you can contact maxwen (One V kernel dev) for assistance.
I maybe wrong but I see that the init.d support is not enabled in your kernel. All the above test I ran it with my own ramdisk.
ckpv5 said:
@neXus PRIME
Thanks for your great effort.
Here is my findings :
Features:
1. HTC Write protection disabled.
This works great Removed both wp_mod2.ko & init.d script to load it... I can confirm the HTC write protection now disabled.
Updating busybox with no problem
2. Enabled swap support. (if you make a swap partition, it should get used. But need testers)
I don't need this feature, so I don't test it.
3. Default scheduler "noop" (I've always liked noop better then all others)
"noop" as default is shown in the attached screenshot
4. HTC perflock disabled (SetCPU does some magic when perf lock is disabled. Test n report)
No idea how to test this
5. Default Min set to 245 Mhz (My liking)
I like 245 Mhz too but I don't see it in both No Frill and CPU Spy (see attached screenshot)
6. Enable KSM support
Don't really need it but will test later with my old KSM init.d script
7. Default governor "ondemand" (later you can select whatever you like e.g
smartassv2)
"ondemand" is shown as default.
8. Ext2/ext3 file system support. (testers needed)
Don't need this so I do not test
9. Aren't above enough ???
Well... it's enough for now... maybe later s2w feature ? Maybe you can contact maxwen (One V kernel dev) for assistance.
I maybe wrong but I see that the init.d support is not enabled in your kernel. All the above test I ran it with my own ramdisk.
Click to expand...
Click to collapse
The default min freq is 245 but.... i forgot to modify CPU freq tables so once you try to move the slider, the 245 Mhz freq is lost. And also, smartassv2 somehow becomes default. Maybe i'll fix, maybe not. Coz atis is already hard at CM work, so thought maybe ppl could test the ksm/ext2/3/swap features.
Regards
neXus PRIME said:
The default min freq is 245 but.... i forgot to modify CPU freq tables so once you try to move the slider, the 245 Mhz freq is lost. And also, smartassv2 somehow becomes default. Maybe i'll fix, maybe not. Coz atis is already hard at CM work, so thought maybe ppl could test the ksm/ext2/3/swap features.
Regards
Click to expand...
Click to collapse
If you used my sources for smartass it becames default because i add it as a default governor. You can modify it in the config. Just use "make menuconfig" and set the default things what you would like. (but first load the original config). Your new modified configuration will saved to "kerneldir/.config"
Just cause I saw your post in the atis's thread, I thought I'd check this out. I have a suggestion for you, instead of using swap, try zram. zram uses part of ram as a compressed swap device. You can get about a 3 to 1 compression ratio and it's much, much faster than swap on a disk. It can be enabled in menuconfig under drivers/staging/zram. Download any of my kernels (in my signature) if you need an example of an init script to start zram.
And, once more, added to Index.
Keep up the good work.
Re: [Kernel/modded] neXusKERNEL v1.0
Who has atis112 kernel can flash this other kernel safely ?
It should work right ?
neXus PRIME said:
The default min freq is 245 but.... i forgot to modify CPU freq tables so once you try to move the slider, the 245 Mhz freq is lost. And also, smartassv2 somehow becomes default. Maybe i'll fix, maybe not. Coz atis is already hard at CM work, so thought maybe ppl could test the ksm/ext2/3/swap features.
Regards
Click to expand...
Click to collapse
Maybe a fix to 245 Mhz is great. The governor not necessary to fix as user can choose what they prefer.
Tested the KMS support... it runs great. With KMS enabled, I have more free RAM available at anytime with no performance decrease.
Anyone want to try, you need init.d script with below command
Code:
echo "1" > /sys/kernel/mm/ksm/run
Or just flash attached kms script that I'm using
Good job neXus PRIME :good:
ckpv5 said:
Maybe a fix to 245 Mhz is great. The governor not necessary to fix as user can choose what they prefer.
Tested the KMS support... it runs great. With KMS enabled, I have more free RAM available at anytime with no performance decrease.
Anyone want to try, you need init.d script with below command
Code:
echo "1" > /sys/kernel/mm/ksm/run
Or just flash attached kms script that I'm using
Good job neXus PRIME :good:
Click to expand...
Click to collapse
Linked your KSM script post to OP. Plus, im doing the 245 Mhz fix right now.
Regards
Updated. Changelog in OP.
@neXus PRIME
Here my finding so far:
Version 2:
1. Freq Table fixed, (Min 122, then 245 just after it)
:good::good:
2. ZRAM support added. (Testers needed)
With zram support added but not enable at default, I find that my ROM lags a lot.
Code:
C:\Users\ckpv5\Desktop\fastboot>adb shell
[email protected]:/ # busybox free
busybox free
total used free shared buffers
Mem: 620984 521988 98996 0 13236
-/+ buffers: 508752 112232
Swap: 0 0 0
[email protected]:/ #
with zram enabled, there is no lag but the smoothness/performance is less compare to v1. Maybe this is due to minfree is default value and cannot be changed with init.d script, will test with lower minfree (as suggested by flar2 in his thread) thru ramdisk change later.
Anyway.. maybe it's my own wrong doing; maybe other user with other ROM can have better result.
Code:
C:\Users\ckpv5\Desktop\fastboot>adb shell
[email protected]:/ # busybox free
busybox free
total used free shared buffers
Mem: 620984 523556 97428 0 13576
-/+ buffers: 509980 111004
Swap: 102396 25600 76796
[email protected]:/ #
Problem...
neXus PRIME said:
Hi,
I'm not making a thread in dev section as i'm not gonna maintain this over time. I just added a few things in atis's config and modified some others to my own liking.
DOWNLOAD:
V2: http://d-h.st/HcS
OLD VERSION: V1: http://d-h.st/dOq
NOTE: Flash zip in below post to enable KSM
http://forum.xda-developers.com/showpost.php?p=38569436&postcount=8
NOTE: Use this excellent app for enabling and verify init.d support
http://forum.xda-developers.com/showthread.php?t=1933849
Features:
Version 2:
1. Freq Table fixed, (Min 122, then 245 just after it)
2. ZRAM support added. (Testers needed)
Version 1
1. HTC Write protection disabled.
2. Enabled swap support. (if you make a swap partition, it should get used. But need testers)
3. Default scheduler "noop" (I've always liked noop better then all others)
4. HTC perflock disabled (SetCPU does some magic when perf lock is disabled. Test n report)
5. Default Min set to 245 Mhz (My liking)
6. Enable KSM support
7. Default governor "ondemand" (later you can select whatever you like e.g smartassv2)
8. Ext2/ext3 file system support. (testers needed)
9. Aren't above enough ???
Guys, atis had a huge role in teaching me how this all works, so major credits to him. The sources are available on my git as well so all are free to fork and try out their own combo of settings.
I'll need a few reports about above features.
Just download n enjoy !!!
Regards
Yasir
Click to expand...
Click to collapse
The min cpu frequency is 122 and i cannot set it to lower no 98MHZ available...
Re: Updated 28/02/13 [Kernel/modded] neXusKERNEL v2.0
SaadCrackz said:
The min cpu frequency is 122 and i cannot set it to lower no 98MHZ available...
Click to expand...
Click to collapse
Yeah that's what I did. I don't like 98
Sent from my HTC Desire X using xda app-developers app
neXus PRIME, can you tell me what do you mean with "4. HTC perflock disabled (SetCPU does some magic when perf lock is disabled. Test n report)"? I mean, I have flashed your kernel and I have SetCPU installed but I don't know what is that "magic". Also, if you want, I can test or see what does happen with it enabled (so far, I see no issues).
I have selected: min 122, max 1008, smartassV2, sio.
Thank you very much!
Re: Updated 28/02/13 [Kernel/modded] neXusKERNEL v2.0
gbueno6 said:
neXus PRIME, can you tell me what do you mean with "4. HTC perflock disabled (SetCPU does some magic when perf lock is disabled. Test n report)"? I mean, I have flashed your kernel and I have SetCPU installed but I don't know what is that "magic". Also, if you want, I can test or see what does happen with it enabled (so far, I see no issues).
I have selected: min 122, max 1008, smartassV2, sio.
Thank you very much!
Click to expand...
Click to collapse
I don't know what setcpu does that's why I called it magic.
Btw, I heard v2 is laggy, so v3 won't have zram enabled.
Sent from my HTC Desire X using xda app-developers app
Re: Updated 28/02/13 [Kernel/modded] neXusKERNEL v2.0
neXus PRIME said:
I don't know what setcpu does that's why I called it magic.
Btw, I heard v2 is laggy, so v3 won't have zram enabled.
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
Ok then! I've found laggy my phone (1.18 deodexed ROM) while it's starting, may be more than with atis's kernel but other than that, I find it great.
Also, may I ask you which are the settings you'd recommend me to set?
Thank you very much!
EDIT: About SetCPU, according to the author through the app, Perflock disabler must be activated in the app if you have a kernel that prevent SetCPU from setting frequencies correctly (stock kernel for example). BUT with neXus PRIME kernel that has perflock disabled, you won't have a single issue using it and you don't need to set on boot Perflock disabler.
Sent from my HTC Desire X using Tapatalk 2
Here you go:
ZRAM is off for ppl having lag
v3
http://d-h.st/7C6
Re: Updated 28/02/13 [Kernel/modded] neXusKERNEL v2.0
I can confirm that loop back devices work. I successfully chrooted Ubuntu using Complete Linux Installer...
Sent from my HTC branded muffin...
Re: Updated 28/02/13 [Kernel/modded] neXusKERNEL v2.0
Stereo8 said:
I can confirm that loop back devices work. I successfully chrooted Ubuntu using Complete Linux Installer...
Sent from my HTC branded muffin...
Click to expand...
Click to collapse
Me too..
Sent from my HTC Desire X using xda premium
Re: Updated 28/02/13 [Kernel/modded] neXusKERNEL v2.0
By the way, @neXusPRIME change the op title to v3.0
Flowed from my HTC branded muffin...
I'M IN NO WAY RESPONSIBLE OF ANY DAMAGE CAUSED BY USING THIS CUSTOM KERNEL.
PLEASE NOTE THAT SOME FEATURES CAN DAMAGE YOUR PHONE AND YOUR EAR.
PLEASE READ ALL BEFORE FLASHING CUSTOM KERNEL.
PLEASE GIVE ME FEEDBACK!!
I NEED SUGEST NOT REQUEST!!
DONT ASK ETA!! (if you can give me coffe on sunday i'll tell you ETA )
Dont worry about donate to me. I dont have paypal
Just press thanks button
What is needed
Samsung GT-I8160 (Jellybean)
Some Android experience
Know how to use Terminal
More patience
Features
fs: ZRAM & Swap Support
fs: CIFS module
fs: Fsync control [Cocafe]
fs/aio: Asynchronous io performance improved
mm: SLUB memory allocator
arm: ThumbEE
arm/vfp: Build with neon
lib: Optimzed CRC32 algorithm [ezekeel]
lib: GNU C version memcpy & string
mali: Utilization control
mali: MALI TWEAK[Cocafe]
mali: PM sampling rate tweakable [Cocafe]
debug: Remove Samsung debug code [Adi_Pat]
debug: Disable KGDB [Adi_Pat]
debug: Remove frame pointer [Adi_Pat]
debug: Android logger as module (free 4mb RAM)
bcmdhd: PM_FAST by default
kernel:Lzop compression
ramdisk: Lzop compression
ramdisk: Init.d scripts
ramdisk: ClockworkMod Recovery 6.0.2.8 [diego-ch]
cpufreq: OndemandQ [Cocafe]
Installation
FlashableZip:
1. Download Kernel
2. Goto Recovery
3. Flash it
DD method:
You need to root your phone first.
What is ROOT? HOW TO?
Please ASK Google!!!
1. Download kernel
2. Extract kernel.bin.md5 from *.tar.md5
3. Copy kernel.bin.md5 to somewhere you like (e.g. /sdcard)
4. Open Terminal app,use these commands
Now lets go to superuser mode
Code:
su
Now lets flash(dd) kernel to kernel partition
Code:
dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15
5. Reboot to take effects
Code:
reboot
* If you type a wrong dd command,it might hard birck your phone
So please think twice before hit enter
* It is recommended that check the md5 of kernel.bin.md5
If it doesnt match 'md5.txt' in zips,dont flash to phone.
Please re-download kernel
How to check md5 on phone?
Open Terminal app (Please install busybox first )
'cd' to the folder(e.g. /sdcard) where has the file
Code:
cd /sdcard
Now get the md5
Code:
busybox md5sum -t kernel.bin.md5 >> out.txt
Now check the md5 manually
Download :
09/09/2013
CM-DK3J9Mt.zip - 8.18 MB (CyanogenMod 10)
18/08/2013
CM-DK3G8M.zip - 7.66 MB (CyanogenMod)
DK3G8M.zip - 8.33 MB (Stock ROM)
NOTE :
sorry I could not test stock rom because I was in cm
wipe cache before flash
Changelog :
09/09/2013
disable ARM: spinlock: use ticket algorithm for ARMv6+ locking implementation
arm/crypto: add aes and sha1 implementaions
use LZ4 Compression (kernel,ramdisk,zram)
add smartassH3 Gov
add exfat modules
power: stop printing noise
ntfs build in kernel now
disable BLN
set swappiness 20
bcmdhd: Reenable IPv6, disable multicast in suspend
toolchain: Linaro GCC 4.7
enable ksm (cyanogen only)
up to linux 3.0.41 kernel
disable ext3 support
18/08/2013
bluetooth fix. thanks samsung
disable arch power
add sec_param_debug
ARM: spinlock: use ticket algorithm for ARMv6+ locking implementation
Proportional Rate Reduction for TCP.
Credits :
@Adi_Pat
@cocafe
@diego-ch
@dh.harald
@lupohirp
source :
https://github.com/hafidzduddin/codina
NOTE :
CM version must flash through recovery. because modules locate in "/system/lib/modules"
to fix bt bug in cm. try to replace original "system/lib/bluez-plugin/audio.so" from cm10 zip.
@hafidzduddin
Just Waiting and be patient to 100% complete upload....
Re: [Kernel][3.0.31 D- Kernel v1 #RC15
Where reference from which to download the kernel?
Sent from my GT-I8160 using xda premium
Great Work:good: what about custom boot animation?
Messi10 said:
Great Work:good: what about custom boot animation?
Click to expand...
Click to collapse
try it idk it work or not
Thank you!
Thank you for all your work hafidzduddin!!
So I found a bug:
Brightness slider is not working properly, displays completely different brightness than the one set to (when I slide it to 70% it displays as in 30% etc.)
When I do the
Q: Why brightness cant setting after booting?!
A: Turn Off manual (press button power) after booting!
Click to expand...
Click to collapse
it doesn't set to the right value and this is kind of annoying for me.
How can I flash the original kernel please? (I couldn't find a specific answer)
Copy both from stock rom kernel.bin.md5 and kernel2.bin.md5 in sdcard and then do "dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15" once or do also "dd if=/sdcard/kernel2.bin.md5 of=/dev/block/mmcblk0p15" for the second one?
takthetank said:
Thank you for all your work hafidzduddin!!
So I found a bug:
Brightness slider is not working properly, displays completely different brightness than the one set to (when I slide it to 70% it displays as in 30% etc.)
When I do the
it doesn't set to the right value and this is kind of annoying for me.
How can I flash the original kernel please?
Click to expand...
Click to collapse
i had that problem with the test kernel, with this kernel i dont have that problem
takthetank said:
Thank you for all your work hafidzduddin!!
So I found a bug:
Brightness slider is not working properly, displays completely different brightness than the one set to (when I slide it to 70% it displays as in 30% etc.)
When I do the
it doesn't set to the right value and this is kind of annoying for me.
How can I flash the original kernel please? (I couldn't find a specific answer)
Copy both from stock rom kernel.bin.md5 and kernel2.bin.md5 in sdcard and then do "dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15" once or do also "dd if=/sdcard/kernel2.bin.md5 of=/dev/block/mmcblk0p15" for the second one?
Click to expand...
Click to collapse
you use 3rd application?
i dont have this issue. just for first boot.
idk its rom or kernel issue
i use kernel2.bin.md5 because on my sdcard kernel.bin.md5 is my custom kernel :angel::angel:
hafidzduddin said:
you use 3rd application?
i dont have this issue. just for first boot.
idk its rom or kernel issue
i use kernel2.bin.md5 because on my sdcard kernel.bin.md5 is my custom kernel :angel::angel:
Click to expand...
Click to collapse
No, I tried both from the slider in dropdown menu and in settings->display->brightness. It's the same problem in both!
So by flashing ONLY kernel2.bin.md5 is enough?
Re: [Kernel][3.0.31] D- Kernel v1 #RC
I agree. The slider's 0 percent is about 60 percent. So 0 percent is about 60 percent.
Edit:
After something happened, brightness suddenly changed itself and bug is fixed.
Sent from my GT-I8160 using xda app-developers app
malamharian said:
I agree. The slider's 0 percent is about 60 percent. So 0 percent is about 60 percent.
Edit:
After something happened, brightness suddenly changed itself and bug is fixed.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Read all my post :3
Re: [Kernel][3.0.31] D- Kernel v1 #RC
Hello! Immediately apologize for mistakes, since English know is bad! I would like to thank you, for you made the core, very happy! And I want to ask - what some have success in overclocking kernel?
Sent from my GT-I8160 using xda premium
This kernel is awesome
Great job !
I hope we will overclock to 1 GHz soon
Re: [Kernel][3.0.31] D- Kernel v1 #RC
killov1982 said:
Hello! Immediately apologize for mistakes, since English know is bad! I would like to thank you, for you made the core, very happy! And I want to ask - what some have success in overclocking kernel?
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Rooobertinhooo said:
This kernel is awesome
Great job !
I hope we will overclock to 1 GHz soon
Click to expand...
Click to collapse
No one.
St erricson not give any document!!
Do you know why s advance have 1ghz?
I think Because i9070 support maxopp.
Why i9070 cant change freq on max opp?
Because freq locked.
must edit something on prcmu.
And I dont understand. Lol!!
Sent from my GT-I8160 using xda premium
hafidzduddin said:
Read all my post :3
Click to expand...
Click to collapse
is this the same one a.k.a test kernel? or this one is 100% complete?
i mean still contain hang / looping on booting or not?
thanks man.
I'm not a developer, I made this kernel "for fun" and for personal use, but I accept (and I need ) help and suggestions from everyone.
What is needed:
LG Optimus L9 P760
busybox in /system/xbin/
Unlocked Bootloader
JB Stock ROM (V20B/V20C/V20D)
Installation:
Make a backup of your current ROM (or just the boot.img)
Install the .zip file from recovery
Recovery -> Wipe cache
Recovery -> Advanced -> Wipe dalvik-cache
Downloads:
http://q.gs/4JJwr 27-05-2013 (latest) (kernel panic?)
http://q.gs/493ni 26-04-2013
http://q.gs/491lz 18-04-2013
Uninstall:
Flash stock kernel zip from recovery
Stock kernel: http://www.mediafire.com/?87i322233ev36k8 (link from markolino631)
Features:
Default governor: interactive
Default I/O scheduler: deadline
init.d support
Added support for some file systems: NTFS (r/w), UFS (r/w), HFS+ (r/w), CIFS
ZRAM (60) enabled and activated at boot (thanks to denzel09 for the commands) (delete /system/etc/init.d/11zram to disable)
CLEANCACHE and ZCACHE
CPU and GPU undervolted
CPU frequencies (MHz): 200 MHz -> 600 MHz -> 999 MHz -> 1100 MHz -> 1220 MHz
GPU frequencies (MHz): 227 MHz -> 456 MHz
Enabled "sanjose" governor
Added "smartassv2" governor
Added "pegasusq" governor
Added "sio" I/O scheduler
Added "row" I/O scheduler
KSM availabile
NOT TESTED: USB OTG support, I can't try this, if you can please leave a feedback. Maybe a powered USB HUB is needed.
"/storage/external_SD/Android/data" will be mounted in "/storage/sdcard0/Android/data" at boot time (delete /system/etc/init.d/12extdataobb to disable).
"/storage/external_SD/Android/obb" will be mounted in "/storage/sdcard0/Android/obb" at boot time (delete /system/etc/init.d/12extdataobb to disable).
Patches for DriveDroid (from this thread)
Known problems:
Some users get a "kernel panic" at boot time, I don't know why this happen and I don't know how to solve it ..
Offline charging isn't working
Source code: http://q.gs/491lV
I've got problem with github, source code is on gitorious.
nice
usb otg is not working..its now smooth i hope it saves battery
karthickkatta said:
usb otg is not working..its now smooth i hope it saves battery
Click to expand...
Click to collapse
Thanks for the feedback
The pegasusq governor will drain more battery then the stock kernel now.. I have to optimize it.
You can set smartassv2 with setcpu/antutu cpu master, it will save battery.
sguerrini97 said:
Thanks for the feedback
The pegasusq governor will drain more battery then the stock kernel now.. I have to optimize it.
You can set smartassv2 with setcpu/antutu cpu master, it will save battery.
Click to expand...
Click to collapse
yes i have changed it to smartass v2 ..i didnt get kernel panic ..i hop you continue to add some more features ..and what does this means "/storage/external_SD/Android/data" will be mounted in "/storage/sdcard0/Android/data" at boot time.
"/storage/external_SD/Android/obb" will be mounted in "/storage/sdcard0/Android/obb" at boot time.
Where are sources?
artas182x said:
Where are sources?
Click to expand...
Click to collapse
It's based on the official JB kernel (here).
However I'm uploading my source on github, I will post them as soon as possible
Thank you for your developpement
Would it be possible to incorporate on your kernel a patch for 2WCR support (2 Ways Call Recording) ?
This don't work for me.
"/storage/external_SD/Android/data" will be mounted in "/storage/sdcard0/Android/data" at boot time.
"/storage/external_SD/Android/obb" will be mounted in "/storage/sdcard0/Android/obb" at boot time.
luq529 said:
This don't work for me.
"/storage/external_SD/Android/data" will be mounted in "/storage/sdcard0/Android/data" at boot time.
"/storage/external_SD/Android/obb" will be mounted in "/storage/sdcard0/Android/obb" at boot time.
Click to expand...
Click to collapse
You're right... I'm fixing it in the next version. You can mount that directories with this command (terminal emulator):
"sh /init.post_boot.sh"
OperationNT said:
Thank you for your developpement
Would it be possible to incorporate on your kernel a patch for 2WCR support (2 Ways Call Recording) ?
Click to expand...
Click to collapse
I will try to add 2WCR.
Yeah, 51.1 fps in Epic Citadel benchmark. On stock gpu there was 44 fps, so the oc works.
Thank you for fast reply, great work and keep doing.
Can you readd the 1300 step?
Inviato dal mio LG-P760 con Tapatalk 2
sguerrini97 said:
I will try to add 2WCR.
Click to expand...
Click to collapse
Thank you so much in advance
New version:
-New freq table:
Code:
MHZ - mV
200 - 785
300 - 800
400 - 833
500 - 850
600 - 900
700 - 930
800 - 955
900 - 1050
1000 - 1280
1100 - 1310
1200 - 1330
1300 - 1340
-Fixed mount of Android/data and Android/obb from external to internal SD
-Optimized pegasusq governor, need time to test battery life.
-Enabled KSM
Link: https://mega.co.nz/#!S4ATGaRT!EjpY3xBmoFbGdi2G_1NQQSI04F8nCQeYhEIoI8TAWvg
Data and obb folder works
Inviato dal mio LG-P760 con Tapatalk 2
thanks finaly a kernel for stock rom that what we need^^
i will wait till it's some sort of stable thing, i have the time, hope you will keep updatinh the kernel etc
thanks to the dev for this work.
i will flast, test and report, but the downloadlink is broken for me?!?
What is the different of battery between this kernel and the stock kernel? Will it still draining the battery while using WiFi like stock kernel?!Can anyone post the battery stats screenshot with this kernel?!, I am quite interested in this kernel, I will try it later. BTW thx for your developing
Sent from my LG-P765 using xda premium
MHL and USB OTG
That's where we need so bad.
Sent from my LG-P760 using xda premium
hamdimo said:
MHL and USB OTG
That's where we need so bad.
Sent from my LG-P760 using xda premium
Click to expand...
Click to collapse
+1
It is not with for p765, kernel panic
Sent from my LG-P765 using xda premium