My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system file of my phone.. My phone turned off after ive deleted and when i tried to turn it on it is stuck on boot..or the logo of my phone.. Can anyone help me recover the system file of my phone or the operating system i may say.. I have tried the android system recovery 3e and wipe/factory set my phone but still stuck on boot..im using cherry mobile flare 2.1 running on android jellybean 4.1:crying:
dexterrio14 said:
My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system file of my phone.. My phone turned off after ive deleted and when i tried to turn it on it is stuck on boot..or the logo of my phone.. Can anyone help me recover the system file of my phone or the operating system i may say.. I have tried the android system recovery 3e and wipe/factory set my phone but still stuck on boot..im using cherry mobile flare 2.1 running on android jellybean 4.1:crying:
Click to expand...
Click to collapse
you have to flash the same rom with a custom recovery you kill you android
emanuelrv said:
you have to flash the same rom with a custom recovery you kill you android
Click to expand...
Click to collapse
. Could you please tell me in details what steps should i do in order to flash the same rom.. Thanks..i really needed to get my phone back:crying:
Follow this, should work
dexterrio14 said:
My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system file of my phone.. My phone turned off after ive deleted and when i tried to turn it on it is stuck on boot..or the logo of my phone.. Can anyone help me recover the system file of my phone or the operating system i may say.. I have tried the android system recovery 3e and wipe/factory set my phone but still stuck on boot..im using cherry mobile flare 2.1 running on android jellybean 4.1:crying:
Click to expand...
Click to collapse
1. Turn off your phone.
2. Boot your phone in Recovery Mode (Volume Up + Power Button).
3. Install the zip file in the following link. h ttp: // ww w.m ediafire. com/download/sh541l2u2e78vl6/CWM6.0.27.z ip (DELETE ALL SPACES )
4.Reboot into the custom recovery you have just installed.
5.Go to toggle signature verification and check if it is enabled or disabled. If it is enabled, you HAVE TO disable it.
6. Select ROM.zip from your phone memory and flash it.
7.If you do not have the rom on your phone(The same ROM of which you deleted the system folder), then mount the usb storage from recovery with your phone connected to the PC. Transfer files to the usb storage or phone storage, which ever is convenient.
8.Boot into Recovery and flash the ROM.
9.Reboot phone and WAIT.
Let me know if that works :good:
System file delete on Your Root Phone
Am follow same condition as you, but bro you need to add new rom on its.your phone is rooted as well so you are able to add new rom on your handset, other wise you go to mobile care center they will flash ur handset and ur set will ok. :laugh:
Mobile Care Center ? Noo
MrJaswal said:
Am follow same condition as you, but bro you need to add new rom on its.your phone is rooted as well so you are able to add new rom on your handset, other wise you go to mobile care center they will flash ur handset and ur set will ok. :laugh:
Click to expand...
Click to collapse
Mr.Jaswal, if he really had to go to the mobile care center, he wouldn't be participating the XDA Forums. People go to the mobile care center only when their phone is hard bricked, and i do not think that is the case here. I'm sure the problem can be solved.
Reflash stock ROM again.You will get your system back.
Sent from my Xperia Arc using XDA Free mobile app
Shreyas_Singh said:
1. Turn off your phone.
2. Boot your phone in Recovery Mode (Volume Up + Power Button).
3. Install the zip file in the following link. h ttp: // ww w.m ediafire. com/download/sh541l2u2e78vl6/CWM6.0.27.z ip (DELETE ALL SPACES )
4.Reboot into the custom recovery you have just installed.
5.Go to toggle signature verification and check if it is enabled or disabled. If it is enabled, you HAVE TO disable it.
6. Select ROM.zip from your phone memory and flash it.
7.If you do not have the rom on your phone(The same ROM of which you deleted the system folder), then mount the usb storage from recovery with your phone connected to the PC. Transfer files to the usb storage or phone storage, which ever is convenient.
8.Boot into Recovery and flash the ROM.
9.Reboot phone and WAIT.
Let me know if that works :good:
Click to expand...
Click to collapse
I dont have a stock rom for my phone..can i try to flash a new rom for my phone with the same version of my os.. Will it work?
dexterrio14 said:
I dont have a stock rom for my phone..can i try to flash a new rom for my phone with the same version of my os.. Will it work?
Click to expand...
Click to collapse
Yes you can, as long as your phone is rooted.But make sure you use a custom recovery and not the stock recovery .Meaning,you have to flash another recovery like CWM Recovery. And please disable signature verification. Let me know what happens Reset to factory settings and do a full wipe before doing anything else though
Shreyas_Singh said:
Flash the same custom ROM you were using before. But make sure you use a custom recovery and not the stock recovery IF you get an error while flashing. And please disable signature verification. Let me know what happens
Click to expand...
Click to collapse
how can i access custom recovery mod?....i can access stock recovery but not custom recovery.. should i install the cwm.zip file first to access custom recovery mod?
CustomRom
dexterrio14 said:
how can i access custom recovery mod?....i can access stock recovery but not custom recovery.. should i install the cwm.zip file first to access custom recovery mod?
Click to expand...
Click to collapse
Yes, install the CWM.zip via stock recovery first. Find the right version for your phone.This one:
h ttp://ww w.mediafire.com/download/sh5 41l2u2e78vl6/CWM6.0. 27.z ip (Delete the spaces and use link)
After you have done that, you can flash a custom rom like this one:
h ttp://w ww.mediafire.co m/download/cxec9dz9be86icc/DarkBoid+ROM+by+Santo_Rock.zi p(Delete spaces in link)
Let me know the satus after that :good:
REMEMBER: Disable signature verification from the recovery menu of the CWM recovery
Shreyas_Singh said:
Yes, install the CWM.zip via stock recovery first. Find the right version for your phone.This one:
h ttp://ww w.mediafire.com/download/sh5 41l2u2e78vl6/CWM6.0. 27.z ip (Delete the spaces and use link)
After you have done that, you can flash a custom rom like this one:
h ttp://w ww.mediafire.co m/download/cxec9dz9be86icc/DarkBoid+ROM+by+Santo_Rock.zi p(Delete spaces in link)
Let me know the satus after that :good:
REMEMBER: Disable signature verification from the recovery menu of the CWM recovery
Click to expand...
Click to collapse
for instance i have successfully installed the cwm.zip file via stock recovery.. If i long press the volume up +power will it be still in stock recovery or in clockworkmod recovery already?
dexterrio14 said:
for instance i have successfully installed the cwm.zip file via stock recovery.. If i long press the volume up +power will it be still in stock recovery or in clockworkmod recovery already?
Click to expand...
Click to collapse
If that's the way your phone goes into recovery , then it will go into the custom recovery. You will not have the stock recovery. You won't need it
Shreyas_Singh said:
If that's the way your phone goes into recovery , then it will go into the custom recovery. You will not have the stock recovery. You won't need it
Click to expand...
Click to collapse
it say's installation aborted when i was flashing the cwm.zip file in stock recovery:crying:
dexterrio14 said:
it say's installation aborted when i was flashing the cwm.zip file in stock recovery:crying:
Click to expand...
Click to collapse
Did you disable signature verification? Do that and try. If that doesn't work either you can use fastboot to install recovery, which will 100%.
Follow these steps :
1.USB drivers for your phone must be installed on a computer.
2.Android SDK must be installed on your computer.
3.Your phone must be connected to your computer via USB.
4.The ADB and Fastboot drivers must be pasted into the folder where Android SDK is installed.
5.Navigate to the Android SDK folder,press shift and Right Click, select the Open Command Window here option.
6.Then type the following after your phone is recognized by cmd.In most cases it is.(Type this command to start fastboot : "adb reboot bootloader" and then "fastboot devices")
7.After that type the following : fastboot devices
And then : fastboot flash recovery FILE.ZIP
8.And you are done Open your custom recovery with the key combination used to open your stock recovery.
Let me know if it worked.
Shreyas_Singh said:
Did you disable signature verification? Do that and try. If that doesn't work either you can use fastboot to install recovery, which will 100%.
Follow these steps :
1.USB drivers for your phone must be installed on a computer.
2.Android SDK must be installed on your computer.
3.Your phone must be connected to your computer via USB.
4.The ADB and Fastboot drivers must be pasted into the folder where Android SDK is installed.
5.Navigate to the Android SDK folder,press shift and Right Click, select the Open Command Window here option.
6.Then type the following after your phone is recognized by cmd.In most cases it is.(Type this command to start fastboot : "adb reboot bootloader" and then "fastboot devices")
7.After that type the following : fastboot devices
And then : fastboot flash recovery FILE.ZIP
8.And you are done Open your custom recovery with the key combination used to open your stock recovery.
Let me know if it worked.
Click to expand...
Click to collapse
Do i need to download the adb and Fastboot Drivers? Or is it already inside the file of Android Sdk but it must be installed first..
Shreyas_Singh said:
Did you disable signature verification? Do that and try. If that doesn't work either you can use fastboot to install recovery, which will 100%.
Follow these steps :
1.USB drivers for your phone must be installed on a computer.
2.Android SDK must be installed on your computer.
3.Your phone must be connected to your computer via USB.
4.The ADB and Fastboot drivers must be pasted into the folder where Android SDK is installed.
5.Navigate to the Android SDK folder,press shift and Right Click, select the Open Command Window here option.
6.Then type the following after your phone is recognized by cmd.In most cases it is.(Type this command to start fastboot : "adb reboot bootloader" and then "fastboot devices")
7.After that type the following : fastboot devices
And then : fastboot flash recovery FILE.ZIP
8.And you are done Open your custom recovery with the key combination used to open your stock recovery.
Let me know if it worked.
Click to expand...
Click to collapse
In the command: fastboot flash recovery FILE.ZIP...is it really FILE.ZIP that i will input or CWM.Zip or TWRP.Zip?
dexterrio14 said:
In the command: fastboot flash recovery FILE.ZIP...is it really FILE.ZIP that i will input or CWM.Zip or TWRP.Zip?
Click to expand...
Click to collapse
CWM.zip is what you will input. The name of the CWM.zip should match the command. Or you will need to change the zip file name to CWM.zip if it is named something else
Shreyas_Singh said:
CWM.zip is what you will input. The name of the CWM.zip should match the command. Or you will need to change the zip file name to CWM.zip if it is named something else
Click to expand...
Click to collapse
After the command: fastboot flash recovery CWM.zip.. Should i reboot my phone? ..or just turn it off and make the key combinition to access the stock recovery..or custom recovery if successful
dexterrio14 said:
After the command: fastboot flash recovery CWM.zip.. Should i reboot my phone? ..or just turn it off and make the key combinition to access the stock recovery..or custom recovery if successful
Click to expand...
Click to collapse
by the way ..how can i disable signature verification?
Hello. I have d605 with 20g and root via kingroot. I want flash varcains CWM. But when i execute loki flash, it says loki aboot version does not match device and fails. When i try flash zip for flash from other recovery - try flash via stock 3e recovery, it says instalaion aborted and error 255. So i want flash it via app Flashify, but its risk. Did someone already tried it? And how to do it? Select flash zip (in flashify) and select cwm*.zip or unpack recovery.img and select flash recovery (in flashify) and put unpacked recovery img?
PS it can be also twrp, i want just working recovery for flash CM11
Thanks for help.
https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en
Features:
1 - Flash boot and recovery .img without even needing to go to recovery.
Click to expand...
Click to collapse
Which means you have to extract recovery.img from the zip file and flash recovery.img via flashify.
When I select flaah recovery in Flashify and select CWM .zip, it says i have to select file with .img file. And in that zip is the recovery.img file.
shhnedo said:
Which means you have to extract recovery.img from the zip file and flash recovery.img via flashify.
Click to expand...
Click to collapse
I think I explained it in a fairly simple way. You need the .img file, NOT THE .ZIP file.
It doesnt work . I unpacked recovery.img from cwm.zip. Then opened Flashify and selected recovery flash, and put unpacked recovery.img (before it i make recovery backup). It said flash successful and then i used reboot recovery. But it shows only black screen with text like "fastboot mode stared udf start". I must remove battery and put back, then it normal booted to android... Reboot to recovery always open the black screen with that text and is needed battery remove (fixed via recovery restore from backup in flashify, then reboot recovery opens stock 3e recov.)
Please What now? Thx
You can root your HTC desire 816g mt6582 (not the octa-core version) manually by flashing a recovery and then using the flashable SuperSU zip file.
This process worked for my device and I am not responsible for any harm caused by this process to your device.
Requirements:
1. Android SDK or minimalistic ADB & Fastboot
2. Recovery image
3. SuperSU package
4. Patience
Download CWM recovery from the link given below:
https://drive.google.com/file/d/0B4bhG1oL3GeKZ3ZBMW53bW9NWUE/view?usp=sharing
Download SuperSu package and place it in root folder of SD card. (Not in Internal memory as CWM recovery for this device doesn't access internal memory for now.)
https://download.chainfire.eu/696/supersu/
Installation Steps:
1. Connect device in debugging mode to your PC/system with adb and fastboot tools.
2. Use the below command to boot into fastboot mode:
adb reboot bootloader
3. Use the below command to flash the downloaded recovery image to device:
fastboot flash recovery Name_of_recovery_file
4. After flashing recovery you have to use the hardware keys to boot into recovery.
5. Use the volume buttons to navigate in recovery and power button to select an option.
6. Select option "Install from SD Card"
7. Select the SuperSu package in SD card.
8. Confirm the installation.
9. If the installation is successful reboot your device and you should see the SuperSu app in the device's App Drawer.
Download link for minimal adb and fastboot
https://www.androidfilehost.com/?fid=24052804347803384
N.B.
If you only want to install custom recovery then follow installation instructions till step 5 and reboot.
Install Recovery for only one boot
Some users may not want to install custom recovery over stock but have to use custom recovery for flashing. They can change the command in Step 3 to this new command and proceed.
fastboot boot recovery Name_of_recovery_file
Please go through the steps carefully before proceeding.
All the best.
Proceed with caution and only if you know the risks of anything going wrong.
Sam63 said:
You can root your HTC desire 816g mt6582 (not the octa-core version) manually by flashing a recovery and then using the flashable SuperSU zip file.
This process worked for my device and I am not responsible for any harm caused by this process to your device.
Requirements:
1. Android SDK or minimalistic ADB & Fastboot
2. Recovery image
3. SuperSU package
4. Patience
Download CWM recovery from the link given below:
https://drive.google.com/file/d/0B4bhG1oL3GeKZ3ZBMW53bW9NWUE/view?usp=sharing
Download SuperSu package and place it in root folder of SD card. (Not in Internal memory as CWM recovery for this device doesn't access internal memory for now.)
https://download.chainfire.eu/696/supersu/
Installation Steps:
1. Connect device in debugging mode to your PC/system with adb and fastboot tools.
2. Use the below command to boot into fastboot mode:
adb reboot bootloader
3. Use the below command to flash the downloaded recovery image to device:
fastboot flash recovery Name_of_recovery_file
4. After flashing recovery you have to use the hardware keys to boot into recovery.
5. Use the volume buttons to navigate in recovery and power button to select an option.
6. Select option "Install from SD Card"
7. Select the SuperSu package in SD card.
8. Confirm the installation.
9. If the installation is successful reboot your device and you should see the SuperSu app in the device's App Drawer.
Download link for minimal adb and fastboot
https://www.androidfilehost.com/?fid=24052804347803384
N.B.
If you only want to install custom recovery then follow installation instructions till step 5 and reboot.
Install Recovery for only one boot
Some users may not want to install custom recovery over stock but have to use custom recovery for flashing. They can change the command in Step 3 to this new command and proceed.
fastboot boot recovery Name_of_recovery_file
Please go through the steps carefully before proceeding.
All the best.
Proceed with caution and only if you know the risks of anything going wrong.
Click to expand...
Click to collapse
Hello bro I want help please my device desire 816G dual 8692 I flashed twrp recovery but seems not good recovery (not fully working) and now I wiped system and no os I'
In my phone. I want please any good recovery as flash.zip to replace with currently one because not able to flash Roms and don't know how to flash any recovery without os in my phone :crying:
Use sp flash tools
medo sator said:
Hello bro I want help please my device desire 816G dual 8692 I flashed twrp recovery but seems not good recovery (not fully working) and now I wiped system and no os I'
In my phone. I want please any good recovery as flash.zip to replace with currently one because not able to flash Roms and don't know how to flash any recovery without os in my phone :crying:
Click to expand...
Click to collapse
You will have to use sp flash tools and flash your stock rom first. This is a mediatek device and I have not been able to flash recoveries through zip file but i use mtk tools. You can find a bugless twrp for your device ie:htc desire 816g mt6592 octacore version. The link is given below:
http://forum.xda-developers.com/desire-816/development/twrp-3-0-recovery-htc-816g-dual-sim-t3310931
not loading the recovery image
it is showing
error: cannot load HTC-Desire-816G-Dual-Sim_MT6582_CWM_recovery
\\
what to do plkz help- me
hey i need help in adb its showing partition 'recovery' does not support flash.
What should i do?
Hi all,
I have sm-g313HU and can't anter ant recovery, onlu DOWNLOAD_MODE work.
I already try to flash recovery via ODIN, it say PASS, but stil do not enter in recovery mode.
Can some one provide recovery odin file (.md5) that wotk.
Thank You
Get recovery.img file and flash it through the Rashr(an app like Flashify)
Ḥäṛî said:
Get recovery.img file and flash it through the Rashr(an app like Flashify)
Click to expand...
Click to collapse
That cannot flash help me plz.
s rajput said:
That cannot flash help me plz.
Click to expand...
Click to collapse
1. Just download PhilZ Touch 6.59.0 recovery.img file from here - http://alice.lunach.ru/paskakori/vivaltods5m/recovery.img
2. Keep the recovery.img file in SD Card.
3. Download Rashr from here - https://drive.google.com/open?id=0B7kf5LHDEYj6T1JkX2ppdGRJNFU
4. On rashr, go to recovery from storage and click on the recovery.img file on SD Card.
5. Then flash it. Reboot into recovery. Done.
how to re install my kit ket virson
I saw this somewhere, it is about flashing stock recovery using TWRP's "install img" feature
Here it is:
But for stock recovery follow these steps :
6) now place the downloaded recovery.img into root folder...
7) again go back to twrp =>install=> on top click on install zip=> you get install IMG option select it.
8) your recovery.img file is visible now just click on it => select recovery IMG => flash.
Does this really work?
Any risk doing it?