Is it possible to somehow run commands through the Flashtool?
I'm trying to flash a new kernel to my XPS but I can't because my comp won't find the device when im using cmd with fastboot commands (adb works just fine) and Flashtool can detect the phone while in fastboot.
How is it possible that Flashtool recognize the phone as connected through fastboot but the cmd does not?
(all drivers are installed and believe me I have searched both the forums and google for answers...)
'fastboot devices' shows nothing while in cmd.
So my question is: Since flashtool finds my device in fastboot is there some way to use fastboot commands through flashtool or any other (perhaps easier) way to do it?
Thanks in advance!
When using adb are you running from the right location and have android sdk installed I had the same problem as you and once I installed everything correctly adb was working fine.
There is a post you'll have to search for it on using and setting up adb correctly..
Good luck!
Sent from my LT26i using Tapatalk 2
http://forum.xda-developers.com/showthread.php?p=17123573
Sent from my LT26i using Tapatalk 2
Here's the link hope it helps..
I am about to root my brothers evo but he has updated and all that stuff. How would i root his phone? Can I follow the root method from Zedomax?
Go to HTC dev and follow the steps to unlock. Once unlocked flash twrp recovery either thru fasboot or goomanager. After that the rooted Rom of your choice
Don't forget about fastboot flashing the boot IMG if needed
Sent from my EVO using xda premium
Let me save you some frustration lol
HTC Dev Unlock
Requirements
HTC Drivers
ADB Tools Mini SDK
Setup
Install HTC Drivers if necessary
Extract ADB Tools anywhere, doesnt matter
Open ADB Tools and hold shift+right click, select open command window here
In phone settings, enable usb debugging and disable fasboot
Connect the phone to pc
Steps
In the command window type adb start-server
Next type adb reboot bootloader
Type fastboot devices to make sure you are connected
Type fastboot oem get_identifier_token
Right click and select mark, click and drag from the top arrows > to the bottom arrows and make sure not to highlight any empty spaces as this will confuse the website, right click and it will be saved to clipboard
Now go to HTC Dev and if you don't already have an account, sign uo for it
Go to unlock bootloader and select other device and accept the agreements
Skip the steps until you get the to token submit window and paste the token you copied earlier and submit.
Go to your email and download the unlock_bin code
Put the code in the ADB Tools folder
Type fastboot flash unlocktoken Unlock_code.bin
When the phone prompt comes up to unlock bootloader hit yes, now you are unlocked, re-enable usb debugging and disable fastboot
Type adb reboot bootloader
Type fastboot devices to make sure phone connected
Type fastboot flash recovery openrecovery-twrp-2.2.2.0-jewel.img
Type erase cache
Reboot phone and you will have unlock and recovery, all thats missing is to restart phone in bootloader and select recovery to flash a rom. Both meanrom and viper have built in kernel installers, should the phone get stuck booting just extract the boot.img from the rom and put it in adb, with phone in fastboot type fastboot flash boot boot.img
What he said
Sent from my EVO using xda premium
Hello,everyone.I've got a Sprint optik(zte v55) 7" pad coming with HC 3.2.
After I flash a modified kernel, Its usb debugging mode can't work properly and my pc can't recgonize it.
Before I flash the kernel, when I switched to usb debugging mode and connect to my pc(runing win7), v55 will display a icon in taskbar showing it's connected with pc, my pc will show a new driver that showing the dirs and files in v55's internal storage, and when I run command "adb devices", it will show v55 is connected.
now, all the above is not happening anymore.
The thing is : I use 'adb reboot bootloader' and 'fastboot boot CWMrecovery.img' to flash the kernel in, which means the adb.exe and fastboot.exe can work before I flahsed the kernel, and now they can't work.So I think maybe it's the kernel cause v55's usb can't work ?
Forgot to metion: now, when boot into android system or recovery mode, I can't use 'adb devices' to discover the device;when I boot in ftm mode(which I don't know what it is),sometimes 'adb devices' print 'xxxxx offline' , sometimes print 'xxxx recovery'.
when print 'xxx recovery', I use 'adb reboot bootloader' , v55 enter black screen with back light which seems in bootloader mode, but 'fastboot devices' and 'fastboot boot CWMrecovery.img' are not working.Very strange.
Click to expand...
Click to collapse
Can anybody know what should I do now ? My intention is to root and flash CM10 to v55,and can be recongize by my pc again.
The kernel I flashed into is in http://forum.xda-developers.com/showthread.php?t=1473555,kernel #60 for v55.
mdky said:
Hello,everyone.I've got a Sprint optik(zte v55) 7" pad coming with HC 3.2.
After I flash a modified kernel, Its usb debugging mode can't work properly and my pc can't recgonize it.
Before I flash the kernel, when I switched to usb debugging mode and connect to my pc(runing win7), v55 will display a icon in taskbar showing it's connected with pc, my pc will show a new driver that showing the dirs and files in v55's internal storage, and when I run command "adb devices", it will show v55 is connected.
now, all the above is not happening anymore.
Can anybody know what should I do now ? My intention is to root and flash CM10 to v55,and can be recongize by my pc again.
The kernel I flashed into is in http://forum.xda-developers.com/showthread.php?t=1473555,kernel #60 for v55.
Click to expand...
Click to collapse
Hi, here are some things to keep in mind when using adb.
Be sure of the command you are issuing
Insure you are in fact cd'd to wherever on your pc the adb binary is located
Insure your jdk is included in your path on your pc
To make things easier you can always also add the tools and platform-tools folder of the android sdk to your path
Lets make sure you are properly set up first before you start flashing things randomly.
For more info, you should check Android's page on ADB if you would like. http://developer.android.com/tools/help/adb.html
I'm not sure if any of this is actually directly related to your issue, but it is nice to start with the basics.
wildstang83 said:
Hi, here are some things to keep in mind when using adb.
Be sure of the command you are issuing
Insure you are in fact cd'd to wherever on your pc the adb binary is located
Insure your jdk is included in your path on your pc
To make things easier you can always also add the tools and platform-tools folder of the android sdk to your path
Lets make sure you are properly set up first before you start flashing things randomly.
Click to expand...
Click to collapse
Thank you for reply.
The adb command I use is install by v55's driver.Everytime I use adb, I always go into the driver's dir (C:\Program Files\ZTE Tablet V55 USB Driver) which adb.exe is in.
And this dir is in my path.
The thing is : I use 'adb reboot bootloader' and 'fastboot boot CWMrecovery.img' to flash the kernel in, which means the adb.exe and fastboot.exe can work before I flahsed the kernel, and now they can't work.So I think maybe it's the kernel cause v55's usb can't work ?
Forgot to metion: now, when boot into android system or recovery mode, I can't use 'adb devices' to discover the device;when I boot in ftm mode(which I don't know what it is),sometimes 'adb devices' print 'xxxxx offline' , sometimes print 'xxxx recovery'.
when print 'xxx recovery', I use 'adb reboot bootloader' , v55 enter black screen with back light which seems in bootloader mode, but 'fastboot devices' and 'fastboot boot CWMrecovery.img' are not working.Very strange.
mdky said:
Thank you for reply.
The adb command I use is install by v55's driver.Everytime I use adb, I always go into the driver's dir (C:\Program Files\ZTE Tablet V55 USB Driver) which adb.exe is in.
And this dir is in my path.
The thing is : I use 'adb reboot bootloader' and 'fastboot boot CWMrecovery.img' to flash the kernel in, which means the adb.exe and fastboot.exe can work before I flahsed the kernel, and now they can't work.So I think maybe it's the kernel cause v55's usb can't work ?
Forgot to metion: now, when boot into android system or recovery mode, I can't use 'adb devices' to discover the device;when I boot in ftm mode(which I don't know what it is),sometimes 'adb devices' print 'xxxxx offline' , sometimes print 'xxxx recovery'.
when print 'xxx recovery', I use 'adb reboot bootloader' , v55 enter black screen with back light which seems in bootloader mode, but 'fastboot devices' and 'fastboot boot CWMrecovery.img' are not working.Very strange.
Click to expand...
Click to collapse
Ooook now we're getting somewhere, I think
Make sure when you send your fastboot flash command you send it like so:
Code:
fastboot flash recovery recovery.img
Replace 'recovery.img' with the actual name of the img, whatever it is.
Also if you are getting the device offline error try killing server:
Code:
adb kill-server
and then restart it
Code:
adb start-server
See if that helps.
wildstang83 said:
Ooook now we're getting somewhere, I think
Make sure when you send your fastboot flash command you send it like so:
Code:
fastboot flash recovery recovery.img
Replace 'recovery.img' with the actual name of the img, whatever it is.
Also if you are getting the device offline error try killing server:
Code:
adb kill-server
and then restart it
Code:
adb start-server
See if that helps.
Click to expand...
Click to collapse
I will try these command when I get home, thank u!:good:
"adb kill-server" and "adb start-server" works fine.They turn v55's "adb devices" from "offline" to "recovery".
And I run command "adb reboot-bootloader", it seems that v55 is in bootload mode.
But after that,I run command "fastboot flash recovery CWMrecovery.img",it returns '<waiting for device>' and stuck there.
Before I flash the kernel #60, I can run "fastboot boot CWMrecovery.img" to boot to cwm,so I think it's not likely be the driver's problem,am I right?
mdky said:
"adb kill-server" and "adb start-server" works fine.They turn v55's "adb devices" from "offline" to "recovery".
And I run command "adb reboot-bootloader", it seems that v55 is in bootload mode.
But after that,I run command "fastboot flash recovery CWMrecovery.img",it returns '<waiting for device>' and stuck there.
Before I flash the kernel #60, I can run "fastboot boot CWMrecovery.img" to boot to cwm,so I think it's not likely be the driver's problem,am I right?
Click to expand...
Click to collapse
Sorry to take so long to reply. I think it is not a driver issue. Do you know if debugging/adb is even enabled in the ramdisk? This generally would have to be done by the dev who created the kernel. Speaking of that, have you tried to contact that dev for further support? For sure they would know more than me since I don't own the device myself. I just know enough to be slightly dangerous, lol
wildstang83 said:
Sorry to take so long to reply. I think it is not a driver issue. Do you know if debugging/adb is even enabled in the ramdisk? This generally would have to be done by the dev who created the kernel. Speaking of that, have you tried to contact that dev for further support? For sure they would know more than me since I don't own the device myself. I just know enough to be slightly dangerous, lol
Click to expand...
Click to collapse
It's very nice of you to keep help me here ,thanks again:good:!
After keep trying in past two days, I found that in ftm mode adb is enabled, and 'adb reboot bootloader' truly made the device into bootloader mode.
On my win7 pc, It can't be recognized.I switch to my old xp pc,and install the driver come from other zte user,and then...fastboot works.
Now I have the v55 running CM10,Awesome!Thanks to all contributors.
Still, my win7 pc and xp pc can't recognize my v55 through usb.But it's not big deal now.I can use tf and wifi and other ways to transfer file to v55.
mdky said:
It's very nice of you to keep help me here ,thanks again:good:!
After keep trying in past two days, I found that in ftm mode adb is enabled, and 'adb reboot bootloader' truly made the device into bootloader mode.
On my win7 pc, It can't be recognized.I switch to my old xp pc,and install the driver come from other zte user,and then...fastboot works.
Now I have the v55 running CM10,Awesome!Thanks to all contributors.
Still, my win7 pc and xp pc can't recognize my v55 through usb.But it's not big deal now.I can use tf and wifi and other ways to transfer file to v55.
Click to expand...
Click to collapse
Oh wow, that is quite the ordeal, but atleast its something huh, lol
I wonder if you could run adb and fastboot commands in xp mode on your win7 pc?
I know there is a way to run programs in XP mode, its just been awhile since I've done it.
And its no problem to keep trying to help, even if I don't know the device and all that. Maybe I can learn to while we are at it, and maybe make a new friend along the way
I cannot find my HTC EVO 3D using fastboot. I just want to unlock my phone. I did following steps:
1. reboot into bootloader using:
Code:
adb reboot bootloader
2. use fastboot find device:
Code:
fastboot devices
or
Code:
sudo fastboot devices
3. nothing shows on the screen
At last, I am using Arch Linux. I can connect to my Nexus 5 with fastboot. It's nothing about my fastboot in my Android SDK.
Any help? Many thanks.
ADB Drivers
Try to reinstall your htc drivers and ADB Drivers
hi, im trying to fastboot boot twrp onto my phone but my PC wont detect my phone in fastboot i type in "fastboot devices" and nothing pops up in my CMD prompt, any work arounds?
SOLVED!
had to download the platform tools from the Android developers website for it to work