Well, I have been in depth testing this case for the past month and a half, spending time with it off the phone and on. For those of you who don't want to read a long review and just want the verdict, here it is: THIS CASE IS AMAZING!!!
I was given the opportunity to review one of the Cruzer Lite TPU cases for our Rezound, and I am in love. I have never used a TPU case before, but I know I will be again in the future. In my review, I will cover 2 main points: Design, and Protection. Please excuse me as I do not have any pictures at this time, as I am traveling and took this opportunity to see how the phone feels without the case.
1. Design:
This case has a very good design. It is very thin, and it has generous cutouts for the power button and headset jack. My only problem with the case so far is that the volume buttons are a little difficult to press. The case feels very good in the hand, and feels much like a hard silicone case. It does not slip, does not attract lint or dust, and fits the phone perfectly. It adds minimal thickness to the phone, and comes in many cool colors. The color that I was given to review is the red version with the little Android logos printed on the back. The case looks and feels very sturdy and durable.
GRADE: 9/10 (Volume buttons can be a bit of a hassle, but you can easily cut that area out with an xacto knife.)
2. Protection:
This case offers serious protection. I would put it on the levels of the Otterbox and Speck series of cases. I constantly drop my phone, and the Cruzer Lite case has always protected the phone from receiving physical damage or damage to the internal parts (I hope ). The case itself also receives little to no damage.
GRADE: 10/10
So, to review:
Design grade: 9/10. Awesome looking case and feels great. Only took off the point because the volume buttons are a bit difficult to press
Protection grade: 10/10. This case offers maximum protection while providing minimal thinness to the device.
TOTAL GRADE: 9.5/10
Solid case. Great price. Great look and feel. Great protection.
I will upload some pictures when I get home from KC on Friday.
Have fun guys
I would agree 100% with this review. I have the same case (different color) and I absolutely love it. Can't beat the value either. My only gripe was the volume buttons much like you said. I cut mine out with an xacto knife and wasnt happy with the outcome so I ordered another case and plan to leave the volume area alone. I have yet to drop my phone (fingers crossed) so I can't vouch for the protection, but everything else about the case is amazing. Great product.
Great review
def awesome cases; i push them with every phone i sell at the store..people love the little android design on them
my daily driver for weeks has been the dark blue with androids on the back. LOVE it. just wish the volume buttons were less of a hassle !
jayochs said:
def awesome cases; i push them with every phone i sell at the store..people love the little android design on them
my daily driver for weeks has been the dark blue with androids on the back. LOVE it. just wish the volume buttons were less of a hassle !
Click to expand...
Click to collapse
Have yo seen my new design for the Gnex?
joelmic said:
Have yo seen my new design for the Gnex?
Click to expand...
Click to collapse
Speaking of new designs, I've got two regular Rezound cases, but I just bought the extended battery, and they don't fit anymore. Any chance you're planning on making extended cases?
nah Joel, but i know matts making an order with you soon
Sent from my ADR6425LVW using XDA App
jayochs said:
nah Joel, but i know matts making an order with you soon
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
You should check it out. its in the galaxy nexus section.
joelmic said:
You should check it out. its in the galaxy nexus section.
Click to expand...
Click to collapse
Just checked out the post and saw you were making a new mold for the Gnex. That design looks awesome! I will definitely order one if you make them for the Rezound. Thanks again for the awesome case Joelmic!
Where do I see this mold?
KORM via the beast known as the Rezound.
txkorm said:
Where do I see this mold?
KORM via the beast known as the Rezound.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=20690082&postcount=40
JOEL, that is AWESOME! make those for the rezound, and i'm sure we will love them. i'll def buy one to show matt if you do make them for the rezound.
maybe we can work out those volume-button kinks *maybe completely remove them like the power button, with enough room to get your thumb in there to turn it up/down*
Not a big fan of phone cases because I want my phone to be as small as possible..... But I'm very impressed! I could rock one of those for sure! How much?
KORM via the beast known as the Rezound.
Related
Send some links and thanks button will apply...
http://www.amazon.com/TPU-Cases-Fle...WDO0/ref=sr_1_1?ie=UTF8&qid=1308883763&sr=8-1
Ordered the one linked above. It arrives tomorrow. Will let you know.
Congo123 said:
http://www.amazon.com/TPU-Cases-Fle...WDO0/ref=sr_1_1?ie=UTF8&qid=1308883763&sr=8-1
Ordered the one linked above. It arrives tomorrow. Will let you know.
Click to expand...
Click to collapse
Thanks for the order! I'm personally using our Smoke TPU cases (no pattern) and love it. I'm actually taking the Otterbox Commuter back. I love that you can see the HTC logo through it.
Here is our link since you asked: http://tpu-cases.com
I ordered one that comes in tomorrow. Does this type of case ever really stretch or lose its shape?
retnuh730 said:
I ordered one that comes in tomorrow. Does this type of case ever really stretch or lose its shape?
Click to expand...
Click to collapse
Nope TPU cases do not lose their shape
I'm not quite sure what the benefits of TPU are. I've done Googling, and I've read that they're more durable and hold their original form better. Is that the extent of it? Apologies for my ignorance, but I'm curious.
Also, how are they aesthetically?
I am also using a smoke grey one from tpu-cases.com. Looks great and works great but there are a few quirks.
First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also.
2nd The top camera hole (the one closer to the top of the phone doesn't line up perfect like the other camera hole. It doesn't block the camera by any means but it just doesn't line up right.
Great Case though...Far better then I thought it would be for me having the case about a month before the phone came out
Just ordered this one...it has a checker pattern but is nice
http://cgi.ebay.com/ws/eBayISAPI.dl...150489&ssPageName=STRK:MEWAX:IT#ht_3148wt_956
If u want a smoke one no pattern here is a link
http://cgi.ebay.com/ws/eBayISAPI.dl...176002&ssPageName=STRK:MEWAX:IT#ht_3148wt_956
Just ordered the smoke case off of Amazon. Should be here tomorrow (thank you Amazon Prime w/ $4 overnight shipping), so I'll no longer be super afraid to drop it.
http://tpu-cases.com/index.php?main_page=product_info&cPath=7&products_id=101
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Congo123 said:
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Click to expand...
Click to collapse
Me, too. And I love the rubberized feel of it.
Looks like the Amazon clear smoke ones for me. Will be ordering tonight.
I just put in an order from Tpu cases. Figure I`ll use it until I get case with kickstand
OneStepAhead said:
Thanks for the order! I'm personally using our Smoke TPU cases (no pattern) and love it. I'm actually taking the Otterbox Commuter back. I love that you can see the HTC logo through it.
Here is our link since you asked: http://tpu-cases.com
Click to expand...
Click to collapse
Just ordered one black and other smoke. Thanks
I ordered my smoke one from http://tpu-cases.com a couple of weeks ago. The only issue I have with it is that the power button is a bit difficult to get at. Not a big deal and I would think that it wouldn't effect most people the same, I have large hands.
http://www.amazon.com/TPU-Cases-Flex...8883763&sr=8-1
Received the case linked above and couldn't be happier with it. Previously I used the HTC silicone rubber case for my EVO 4G followed by an Otterbox Commuter when it was available. Over time I was disappointed in both cases as the silicone rubber of both products stretched and I was always trying to "form" it around the phone. This TPU case slides easily out of my pocket and does not seem to grab lint. It also seems as if it is going to hold up very well. The cutout on the top camera is a little off, but does not impact the ability of the phone to take pictures, focus, etc. I too had planned on kicking the HTC branded kickstand case......but I think I would be happiest with a TPU case with a modded battery cover that had a kickstand with a TPU case over it with cutout added.
Congo123 said:
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Click to expand...
Click to collapse
I have the TPU case, and that issue is a slight annoyance for me. These battery covers feel so flimsy as it is.
Congo123 said:
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Click to expand...
Click to collapse
I think its a positive too, but it is hard to get the case off without pulling off the battery door too. It's just a weird battery door design I think. It's not a huge issue, but I did notice it as well. As for the top camera hole being 1mm off or so, we are fixing the mold and will have smoke, smoke argyle, and black with the correct positioning as early as next Friday. If you already ordered and you want one of the new ones when they come in just shoot me a PM and I'll get you on free of charge. As for the white, red, and green those ones are staying as is for the time being. It is just a cosmetic thing though, it doesn't block the camera at all. Sorry guys!
Any of you guys that ordered from me, if you have some free time I would be eternally grateful if you left product reviews for them on Amazon. Reviews really help sales tremendously.
OneStepAhead said:
I think its a positive too, but it is hard to get the case off without pulling off the battery door too. It's just a weird battery door design I think. It's not a huge issue, but I did notice it as well. As for the top camera hole being 1mm off or so, we are fixing the mold and will have smoke, smoke argyle, and black with the correct positioning as early as next Friday. If you already ordered and you want one of the new ones when they come in just shoot me a PM and I'll get you on free of charge. As for the white, red, and green those ones are staying as is for the time being. It is just a cosmetic thing though, it doesn't block the camera at all. Sorry guys!
Any of you guys that ordered from me, if you have some free time I would be eternally grateful if you left product reviews for them on Amazon. Reviews really help sales tremendously.
Click to expand...
Click to collapse
Quick question about your cases. Any reason your cases cover the camera button, like for support reasons? It's harder to push the camera button down than I'd like, causing shaky pictures, but I cut a hole out for it. Just a thought for future updates.
I like the camera button covered....that button would eventually get sheared off by me if it wasn't covered. Ohh and I left amazon feedback ftw.
Just got this case from Amazon:
http://www.amazon.com/dp/B005MZ35NM/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Amazingly the only folio I've been able to find. I have the same style case for my iPad and I must set this is the way to go. Though I can see the desire for a portrait mode . The hand strap is a great touch for that.
Sent from my MoPho using XDA App
Wow nice find.
Not sure if it's the same kind of case, but I just found
http://www.bestbuy.com/site/M-Edge+...218402861274&skuId=3441552&st=nook&cp=1&lp=15
while I was looking for a case of my own. Since the Amazon one is out of stock, it seems like an alternative.
DssTrainer said:
Just got this case from Amazon:
http://www.amazon.com/dp/B005MZ35NM/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Amazingly the only folio I've been able to find. I have the same style case for my iPad and I must set this is the way to go. Though I can see the desire for a portrait mode . The hand strap is a great touch for that.
Sent from my MoPho using XDA App
Click to expand...
Click to collapse
It looks great and the size is perfect - compact and slim. How does it feel in hands - solid? Does it block the mic hole at the top?
tmlee51 said:
It looks great and the size is perfect - compact and slim. How does it feel in hands - solid? Does it block the mic hole at the top?
Click to expand...
Click to collapse
Looking at the pics, it looks like the NT would snap into it at the four corners rather than any edges. The NT's mic is a small hole at the top of the device, offset from the center. I doubt this case would block it.
[Edit]
Sorry, I should check the reply more closely before posting. I was looking at the one from Best Buy.
This is the one I picked up. It's pretty nice, a couple of different angles to stand the NT up, and it surrounds the whole thing, so it's pretty secure.
edit: I'm not allowed to post links yet, but search on amazon for crazy on digital's folio case for the Nook Color
This may seem like a dumb question, but can you stand it up in portrait mode with this case?
@DssTrainer Has it came in yet? What do you think of it?
r2tbone said:
@DssTrainer Has it came in yet? What do you think of it?
Click to expand...
Click to collapse
Im also interested what you think of it. I was thinking about buying the official barns and noble leather writers case but this onle looks decent for the price.
http://www.amazon.com/CrazyOnDigital-Leather-Protector-eReader-Package/dp/B006598LRO/ref=pd_cp_e_1
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Cloudsnightmare said:
http://www.amazon.com/CrazyOnDigital-Leather-Protector-eReader-Package/dp/B006598LRO/ref=pd_cp_e_1
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Click to expand...
Click to collapse
I had this one for the nook color, and I loved it.
Well i just bought one from amazon. It will be hear Wednesday. I will Take pictures, and write a in-depth review on it by next Friday. I will probably be buying a couple cases, and writing reviews to help people make their decision. Im starting with this one because it has the holes for speaker in it. Which is an important feature.
Comando156 said:
Well i just bought one from amazon. It will be hear Wednesday. I will Take pictures, and write a in-depth review on it by next Friday. I will probably be buying a couple cases, and writing reviews to help people make their decision. Im starting with this one because it has the holes for speaker in it. Which is an important feature.
Click to expand...
Click to collapse
I look forward to the reviews. I don't even know what type of case I want. It will be nice to see comparisons.
i have the nook color version from this same company and i love it...it looks very nice and very comfortable and has at least 4 viewing angles but only in landscape mode.no portrait mode viewing.
JAVOedge Austin Back Flip Case for the Barnes & Noble Nook Color / Nook Tablet - Latest Generation (Gray)
(I'm new to XDA and I did not permitt to post links... )
This one looks great but expensive. $34.99 . Hope I can find one better... $34.99...
Cloudsnightmare said:
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Click to expand...
Click to collapse
Just ordered this one, great price hopefully its great quality.
Cloudsnightmare said:
http://www.amazon.com/CrazyOnDigital-Leather-Protector-eReader-Package/dp/B006598LRO/ref=pd_cp_e_1
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Click to expand...
Click to collapse
ordered this before I even saw your post.
Got it, hate it. No way to really fold the cover back and use it in portrait mode. Cover doesn't close flush with the nook.
Really nice quality leather.
If you case closes flush with the nook then I might be wiling to get a replacement and see if this one is defective but I don't think the magnets are strong enough/the groves to hold it in portrait prevent it from closing flush.
Just got the Speck Fitfolio in black. It fits very well and does not make it feel bulky at all. They have also extended the "vegan leather" on the back over the hard shell making it look far nicer.
Ok I purchased this case. Like the feel of it and its not too bulky. BUT, whatever chemicle they used to coat the leather absorbed into the bezel of my nooks rubber paint coating and caused a brown spotted discoloring.... I tried to clean it with alcohol and other cleaning products but its absorbed in the coating ... im pretty pissed to be honest. I just orders a skinomi woodgrain skin to cover the damage up, and plan on taking pictures and contacting the case manufactor to have them buy me a new nook! WARNING TO ALL!
I purchased this case
http://www.amazon.com/dp/B005MZ35NM/..._am_us?ie=UTF8
I've had it for about 3 weeks but haven't used it due to a very
strong chemical smell. The smell transferred to my hands after unpacking the case.
I've been waiting for the smell to go away before using it but after reading posts regarding damage the Nook finish I may never use it.
At the time I purchased my Nook I also picked up a B&N case that was discounted 30%. It's much better quality, I really like clips that hold it in place. Very quick and easy to pop the Nook in and out. The B&N case was approximately $10 higher cost but I feel it's higher quality case and worth the cost difference.
After finding out about Brando screen protectors after reading a thread here on XDA, I decided to see what other accessories they had for the 7.7. And they had a couple cases in different colors that looked worth a try. Ive been wanting one that snapped on and only covered the edges and not any of the screen itself because sometimes they will cause a screen protector to peel, and I found this. It comes in 4 colors. I ordered the "ice" color which is basically clear because I wanted to still be able to see the silver back. And since it was only $10 I decided to pick up this one too, also in the ICE color. So anyway Ill write some short reviews about them when I get them. It takes 7-10 days from Hong Kong. Heres a couple pics also.
Just ordered 2, these look awesome! Thanks for posting, I'll post pics when I get them.
Sent from my GT-P6800 using XDA
xangelkiller said:
Just ordered 2, these look awesome! Thanks for posting, I'll post pics when I get them.
Sent from my GT-P6800 using XDA
Click to expand...
Click to collapse
Cool, what colors did you get?
Gam3r 4 Life said:
Cool, what colors did you get?
Click to expand...
Click to collapse
The blue and the black. if I like them I will get the other colors too!
Sent from my GT-P6800 using XDA
I got a similar one, with an X in the back. It works, but it increases the size a bit (not so much thickness though, but the length x height), without adding much value (like a stand or wallet pockets or whatever). And it's kind of slippery in your hands, but not so much in your pocket.
It does protect the tab more than the OEM book case, but the Book Case looks better, it's more portable, it's a stand and slips into your pocket easier, while not being slipery in your hands when folded. Protection is just against scratches though.
The worst thing about the case like this is the power button. It's kind of hard to press on/off and sometimes I turn off the tablet trying...very annoying.
RipplingHurst said:
I got a similar one, with an X in the back. It works, but it increases the size a bit (not so much thickness though, but the length x height), without adding much value (like a stand or wallet pockets or whatever). And it's kind of slippery in your hands, but not so much in your pocket.
It does protect the tab more than the OEM book case, but the Book Case looks better, it's more portable, it's a stand and slips into your pocket easier, while not being slipery in your hands when folded. Protection is just against scratches though.
The worst thing about the case like this is the power button. It's kind of hard to press on/off and sometimes I turn off the tablet trying...very annoying.
Click to expand...
Click to collapse
Yea, I will most likely be using the snap on most of the time.
UPDATE: Ive received the cases and will write a short review with pics.
Ill start with the snap on case. First thing I noticed that there were 2 spots that had what I would call a stress mark. You know the whitish look that plastic gets when its been bent and is close to breaking? (see pics) This was right out of the package. And it had a scratch along the back as well. Very cheaply made. But it does fit, and fits pretty good. But compared to the TPU type it just doesnt look good, so that one will be shelved. No point in returning it. Comes in Blue, Pink, Black, and ice (clear) I dont recommend this case.
The "ice" colored clear TPU style "X" case is awesome. Its made very well and fits perfect. Since its clear the silver of the tab shows through and looks great. All the ports are cut out well, and it has a very nice grip feel to it. Which of course is a great thing to have on a nearly $600 tablet. My only complaint is one that happens with most of these style cases, and that is that it makes the buttons stiff, and less responsive. They work, but require a lot more force to register. Other than that if you want a case that protects, and still shows the awesome silver back of the 7.7, I do recommend this case, and I prefer the ice colored one. (clear) It does come in red also.
I had also ordered this sleeve . I knew there was a chance it might not fit, but based on the measurements I knew it would be close. Well it didnt fit. It was only $7.45 shipped so no biggie. Ill give it to my mother in law that has the first edition 7" galaxy tab.
I just checked their site (brando), and they have a new case choice that looks like it might be good. Its a snap on type, but is rubber backed rather than the hard plastic. Comes in Colors: Black, White, Blue, Pink, and Red. I might order one, but I learned from my last order to expect at least 16 days for shipping.
Anyway thats all and heres some pics.
Now that you have had the clear back cover for a few days, how is it holding up specially around the buttons and sim/SD slot? I ordered a similar one from an eBay seller in china and it has fallen apart those two areas. This was within 2 day of first use, I had not dropped it so was very upset about it. I did pay $4 for it so i guess I shouldn't complain.
Using Galaxy Tab 7.7 P6800
adinis78 said:
Now that you have had the clear back cover for a few days, how is it holding up specially around the buttons and sim/SD slot? I ordered a similar one from an eBay seller in china and it has fallen apart those two areas. This was within 2 day of first use, I had not dropped it so was very upset about it. I did pay $4 for it so i guess I shouldn't complain.
Using Galaxy Tab 7.7 P6800
Click to expand...
Click to collapse
I dont even use it. Already collecting dust. I use the X case sometimes, but love the poetic case and use it the most. Looks great, protects great, and has multi stand angles. Highly recommend.
Availibility: On http://www.cruzerlite.com/ and http://www.amazon.com/shops/cruzerlite
Rating: 9/10
So a few months back, i ordered a bag o' cases from cruzerlite. I was in dire need of a case and i heard only good things about them. A few days later i recieved them and loved them since. It has cut-out for most of the phone (usb, microphones, camera, power) and has raised plastic for the volume rocker. Overall, You CANNOT go wrong with is case. it protects the phone, has a little lip so if placed face down, you dont have to worry about the screen. it is also priced very well, most costing less then $10. My only complaint, bringing it from a 10/10 to a 9/10 is that the Volume rocker on the rezound is already hard to push and this makes it even harder.
tl;dr: Best TPU case out there. if you want a case that wont add too much bulk but still have good safety, look no further.
also on there website, they have a code, XDA, which gets you 10% at checkout
lol this is like the third cruzerlite TPU case review thread.
....mine was still the best
antp121 said:
Availibility: On http://www.cruzerlite.com/ and http://www.amazon.com/shops/cruzerlite
Rating: 9/10
So a few months back, i ordered a bag o' cases from cruzerlite. I was in dire need of a case and i heard only good things about them. A few days later i recieved them and loved them since. It has cut-out for most of the phone (usb, microphones, camera, power) and has raised plastic for the volume rocker. Overall, You CANNOT go wrong with is case. it protects the phone, has a little lip so if placed face down, you dont have to worry about the screen. it is also priced very well, most costing less then $10. My only complaint, bringing it from a 10/10 to a 9/10 is that the Volume rocker on the rezound is already hard to push and this makes it even harder.
tl;dr: Best TPU case out there. if you want a case that wont add too much bulk but still have good safety, look no further.
also on there website, they have a code, XDA, which gets you 10% at checkout
Click to expand...
Click to collapse
Got one today for my Gnex. It's awesome. Nuff said
I rate this review 0/10 :good:. Much <3.
Kinda off topic, but kind of not: I'm really digging their t-shirts as well.
Thanks for the review, OP!
ScottyBrown said:
Thanks for the review, OP!
Click to expand...
Click to collapse
Np
Sent from my ADR6425LVW using Tapatalk 2
I've had a Diztronic case for both my GNex and S3, so naturally I had to get one of these for the DNA as soon as it was available on Amazon. Diztronics are simple, full backing and side rubber bumpers. There's no screen protectors I like the pronounced power and volume buttons on this case. It makes them much easier to use. As always, the Diztronic gives a solid feel to the phone. It no longer feels like it's going to slip and fly out of my hand. The back has openings for the camera, flash, and speaker, but not for the notification light.
If you're a minimalistic case owner, get this. Great stuff for $15 (incl. shipping).
http://www.amazon.com/Diztronic-Matte-Black-Flexible-Verizon/dp/B00A9YJ48Q
The only thing that bugs me about these cases is that they appear to over up the back notification light.
It does... I might drill a hole for the rear notification light on my diztronic
Sent from my Nexus 7 using xda app-developers app
I also ordered this (http://www.amazon.com/EMPIRE-Black-.../B00A83TNBG/ref=sr_1_1?ie=UTF8&qid=1354352083), so the back notification light being covered doesn't bother me. It's obnoxiously priced at $4 (worth about 50 cents), but does the job well. And even though it says for DNA, it will work for any phone.
docnok63 said:
I also ordered this (http://www.amazon.com/EMPIRE-Black-.../B00A83TNBG/ref=sr_1_1?ie=UTF8&qid=1354352083), so the back notification light being covered doesn't bother me. It's obnoxiously priced at $4 (worth about 50 cents), but does the job well. And even though it says for DNA, it will work for any phone.
Click to expand...
Click to collapse
Kind of funny how in the pictures for the stand they are using an iPhone.... lol
volfan22 said:
Kind of funny how in the pictures for the stand they are using an iPhone.... lol
Click to expand...
Click to collapse
Right...shows you how much it's made specifically for the DNA...
I just received this case today (ordered from Amazon; $12.50 with free 2 day shipping and no tax). This is definitely one of the nicer TPU cases I've had. There's a nice soft-touch, rubberized kind of exterior with the gel/plastic interior. It certainly inspires confidence in being able to protect the phone from a rough fall. It doesn't bulk up the phone too much, either.
If anyone is still on the fence about a case, give this one a close consideration. (It's so cheap, what have you got to lose?).
Sent from my HTC6435LVW
docnok63 said:
I've had a Diztronic case for both my GNex and S3, so naturally I had to get one of these for the DNA as soon as it was available on Amazon. Diztronics are simple, full backing and side rubber bumpers. There's no screen protectors I like the pronounce power and volume buttons on this case. It makes them much easier to use. As always, the Diztronic gives a solid feel to the phone. It no longer feels like it's going to slip and fly out of my hand. The back has openings for the camera, flash, and speaker, but not for the notification light.
If you're a minimalistic case owner, get this. Great stuff for $15 (incl. shipping).
http://www.amazon.com/Diztronic-Matte-Black-Flexible-Verizon/dp/B00A9YJ48Q
Click to expand...
Click to collapse
Just got mine in today and I love it. Thanks.
sent from my rooted DNA
Wow just got mine. Simply perfect. Very impressed it looks like a 30$ case!
Sent from my HTC Droid DNA
Does it work with wireless charging?
irus said:
Does it work with wireless charging?
Click to expand...
Click to collapse
Yes. There's no "sweet spot" that Qi emits from to cover up. Just throw it on the pad and it works.
i noticed one of the reviews on amazon stated the diztronic is going to make a revised version that addressed the back notification light.. anyone hear that?
Well, I had my first 2.5 foot drop today. I was 3/4 asleep plugging it on my dining room table when it slipped and flew out of my hands. It landed on its length-wide edge (the side with the volume buttons) and I caught it with my feet after it hit so it didn't tumble. While this is an ideal fall, I'm happy to report there's not a scratch or crack and the case looks like I just took it out of the box. Worth three times the $15 to me at this point.
docnok63 said:
I've had a Diztronic case for both my GNex and S3, so naturally I had to get one of these for the DNA as soon as it was available on Amazon. Diztronics are simple, full backing and side rubber bumpers. There's no screen protectors I like the pronounced power and volume buttons on this case. It makes them much easier to use. As always, the Diztronic gives a solid feel to the phone. It no longer feels like it's going to slip and fly out of my hand. The back has openings for the camera, flash, and speaker, but not for the notification light.
If you're a minimalistic case owner, get this. Great stuff for $15 (incl. shipping).
http://www.amazon.com/Diztronic-Matte-Black-Flexible-Verizon/dp/B00A9YJ48Q
Click to expand...
Click to collapse
I'm in your boat, i had one for my GNex and S3 too. i love their cases. i bought one last week and it's already waiting for my DNA when it comes in tomorrow.
Just a heads up this case suffers from the same problem main others do, which is it doesn't play well with earphones/headphones with a bigger jack. I had to cut mine so that my shures would plug in.
Damn didn't notice that
Sent from my HTC Droid DNA
thanks
thanks
Just received my case, and while i normally don't like cases, this one feels great. even better than my old Gnex one. i think the materials they used are a step up from what they used before. The only issue i have as mentioned above, is that the volume cutout is a bit small. I assume other cases would have similarly sized cutouts so its not a big issue but i will probably be cutting mine so it can fit my larger jacks.
Can anyone post pics of this case on the phone?
azndan2 said:
Can anyone post pics of this case on the phone?
Click to expand...
Click to collapse
Someone already did http://forum.xda-developers.com/showthread.php?t=2003684&page=3