Touchpad ACME Uninstaller - TouchPad General

I just uninstalled Android through ACME Uninstaller and I full erased my touchpad + i web os doctored it. Is the uninstaller supposed to boot up every time i restart my touchpad? because everytime i shut it down or restart it, some commands pop up and i believe it is the uninstaller but i don't know what else it could be. I deleted everything that should've been deleted also.
Is this normal for WebOS to boot with those commands all the time? The code flashes by for a minute and then it loads normally. I am pretty sure i deleted everything i could

thedark1337 said:
I just uninstalled Android through ACME Uninstaller and I full erased my touchpad + i web os doctored it. Is the uninstaller supposed to boot up every time i restart my touchpad? because everytime i shut it down or restart it, some commands pop up and i believe it is the uninstaller but i don't know what else it could be. I deleted everything that should've been deleted also.
Is this normal for WebOS to boot with those commands all the time? The code flashes by for a minute and then it loads normally. I am pretty sure i deleted everything i could
Click to expand...
Click to collapse
Once installed you should only see moboot menu (Options to boot into webos, recovery, cyanogen etc) initially with cyanogenmod being the default selected.
If this is not what your reffering to i would try wiping the cache, dalvik and factory reset then reflashing the ROM. You should also check the MD5 of the download to confirm you have a good file
Hope this helps

thats not what im referring to. I have uninstalled all of android by utilizing the uninstaller. But what happens is the uninstaller keeps running every time i do a device restart for the touchpad or i turn it off and then on. I don't know if that is normal for it to do that.

thedark1337 said:
thats not what im referring to. I have uninstalled all of android by utilizing the uninstaller. But what happens is the uninstaller keeps running every time i do a device restart for the touchpad or i turn it off and then on. I don't know if that is normal for it to do that.
Click to expand...
Click to collapse
I actually acmeuninstalled last night and I'm not seeing the "code" your speaking of, maybe if you get what it says it would be more help, get a picture or video. But if your touchpad is running fine I wouldn't worry to much since you can always webdoctor it back to life if the worst happens.
Sent from my Touchpad using Tapatalk

I have done the same and I did not see any lines of code. A picture or video would help. Or tell us what it says when it boots up
Sent from my MB855 using XDA App

thedark1337 said:
I just uninstalled Android through ACME Uninstaller and I full erased my touchpad + i web os doctored it. Is the uninstaller supposed to boot up every time i restart my touchpad? because everytime i shut it down or restart it, some commands pop up and i believe it is the uninstaller but i don't know what else it could be. I deleted everything that should've been deleted also.
Is this normal for WebOS to boot with those commands all the time? The code flashes by for a minute and then it loads normally. I am pretty sure i deleted everything i could
Click to expand...
Click to collapse
You didn't put the uninstaller on the touchpad itself did you? It's supposed to set in the same Palm file on your computer as Acmeinstaller and is used the same way.

Any reason why you guys remove Android?

sweetboy02125 said:
Any reason why you guys remove Android?
Click to expand...
Click to collapse
i did it to start fresh with xron's latest build. Leo is magical with CM7 port.

i can barely read the commands its running but it seems like its reverting the touchpad back to pre android settings. It runs by the code for 30 seconds and then it loads webos.
I saw some of them as setting the cpu speed, the codec sample rate, deleting files that aren't even on my touchpad. I've doctored and full erase yet it persists. Hm..

Did you try to install ACME again?

thedark1337 said:
thats not what im referring to. I have uninstalled all of android by utilizing the uninstaller. But what happens is the uninstaller keeps running every time i do a device restart for the touchpad or i turn it off and then on. I don't know if that is normal for it to do that.
Click to expand...
Click to collapse
what picture do see on top, if its penguins then it android, if its planes then its webos

i don't see any planes or android but i do see that first its running a set of commands to boot into webos and then logging into webos. the HP logo shows up for a split second before them and then after the commands the HP logo shows up once more and loads like normal.

thedark1337 said:
i can barely read the commands its running but it seems like its reverting the touchpad back to pre android settings. It runs by the code for 30 seconds and then it loads webos.
I saw some of them as setting the cpu speed, the codec sample rate, deleting files that aren't even on my touchpad. I've doctored and full erase yet it persists. Hm..
Click to expand...
Click to collapse
Did u install preware on the webos or overclocked it? That might be the problem

shywolf28 said:
Did u install preware on the webos or overclocked it? That might be the problem
Click to expand...
Click to collapse
Can anyone post a link to ACMEUninstaller please?

phonecurious said:
Can anyone post a link to ACMEUninstaller please?
Click to expand...
Click to collapse
check your pm.

life_420 said:
check your pm.
Click to expand...
Click to collapse
Can you send me the link for ACME Uninstaller? I found dead links everywhere. Thanks in advance

here is the acmeuninstaller cyanogenmod had on their alpha 3.5 page of cm7
i have done nothing to it except upload to a working link.
ACMEuninstaller
If this not allowed let me know and i will delete and remove the link.
enjoy and hit the thanx button.....

life_420 said:
here is the acmeuninstaller cyanogenmod had on their alpha 3.5 page of cm7
i have done nothing to it except upload to a working link.
......
If this not allowed let me know and i will delete and remove the link.
enjoy and hit the thanx button.....
Click to expand...
Click to collapse
Thanx button hit! You made my day

Related

[Q] my gtab problem is driving me angry

Been using vegan 5.1 for a month now and its been great. Now the browser and market just closes at random. Not FC but just closes. Reboot doesn't help but turn of then wait a min then on does. I reinstalled and with supplement and without several times. Same thing.
sometimes it can go hours and sometimes its min when it starts.
Please help me or I wont have much hair left!
Thanks guys
It seems to happen more after using market. not sure though
clear cache in cwm first
thebadfrog said:
clear cache in cwm first
Click to expand...
Click to collapse
Dalvik cache? If so I just did and I will report back
Did it start happening after the supplement 5.1.1? A few users rebooted reboot issues especially after using Flash in the browser. I haven't been able to replicate it, but I also wipe user data as a rule between mods and updates.
roebeet said:
Did it start happening after the supplement 5.1.1? A few users rebooted reboot issues especially after using Flash in the browser. I haven't been able to replicate it, but I also wipe user data as a rule between mods and updates.
Click to expand...
Click to collapse
before I tried the supplement. I have min stuff on the tab and use it for web browsing. but I did install a few apps that I could share folders off my pc.
it seems to be doing it after I use market at some point. i done the cache clear as above and it worked fine for 2 hours, then I opened up market and looked around. with in 2 min the screen went blank and i was to the lock screen. other times it goes to the home screen.
I done a shut down, restart and havent been on market and its been up for a hour.
I'm running the supplement at this time. only thing downloaded was quadrant and kindle.
first time I done the quadrant test also, it was 2152 or close. not sure what it should be if that matters.
thanks for your help.
this still happens in all roms I use. i can figure out whats up.
Jack Daddy said:
this still happens in all roms I use. i can figure out whats up.
Click to expand...
Click to collapse
Doesn't make sense it would only happen with the same 2 apps & on different roms.
Have you tried browsers other than the stock browser & does it happen with those? What version of Market is currently installed, an older version or the nesest (3.0.27)?
aabbondanza said:
Doesn't make sense it would only happen with the same 2 apps & on different roms.
Have you tried browsers other than the stock browser & does it happen with those? What version of Market is currently installed, an older version or the nesest (3.0.27)?
Click to expand...
Click to collapse
happens with all of the browsers and ever verson of market tried. it does happen less if I never open up market.
I'm using cm7 right now and lately it has been random rebooting on its self. not everyday but it does it.
Jack Daddy said:
happens with all of the browsers and ever verson of market tried. it does happen less if I never open up market.
I'm using cm7 right now and lately it has been random rebooting on its self. not everyday but it does it.
Click to expand...
Click to collapse
After switching roms you are doing data/factory reset, wipe cache & wipe dalvik aren't you?. Have you tried doing Fix permissions?
aabbondanza said:
After switching roms you are doing data/factory reset, wipe cache & wipe dalvik aren't you?. Have you tried doing Fix permissions?
Click to expand...
Click to collapse
yes, but have not tried doing fix permissions. i will try that, thanks
what should be mounted and unmounted? checking everything
thanks
Jack Daddy said:
what should be mounted and unmounted? checking everything
thanks
Click to expand...
Click to collapse
Are you talking in CWM, Mounts & Storage?
Shouldn't have to do anything there. All that should be automatically mounted. you wiud know if one of those wasn't. ..system would come up.../data is where installed apps are, /sdcard is where you store stuff, /system is where your rom is, /cache is by the system
If you use cpumaster,setcpu or similar, try removing.I found setcpu to be responsible for crashing some apps and sleep of death on my tab and was only overclocked to 1.2Ghz.I now overclock by editing script included in rom and no more problems.

[HC EMMC] Working Market & Gapps

I want to share the versions of the Market and various Gapps that work for me on Sam's HC EMMC v4.0, 2nd ed. build {Huge props to him, deeper-blue, and others who got HC working on the NC. Without their heroic efforts, I'd be working 4 jobs right now trying to save up to buy a Xoom}
This script is the first one I run after doing a fresh build of HC EMMC, but you should also be able to do it on a stale version of HC as well.
Maps is version 5.0
While I am confident that these files will work for you as well, please remember, individual results may vary---use at your own discretion.
NOTE: The 'GoogleServicesFramework.apk' file in the attached .zip will remove the blue wi-fi icon from Sam's initial build. If you prefer the blue icon over a working Market (My Apps), then DO NOT proceed with the installation!
That being said, please do the following before trudging ahead:
+ Perform a full backup using your bootable CWR SD card [see samuelhalff's thread for instructions on this: http://forum.xda-developers.com/showthread.php?t=947071]
+ Backup each of the original files on your NC that will be replaced by the script
+ See #1 & #2 above...you've been warned
Instructions for Installation:
Extract the files contained within the attached .zip into the same directory as your ADB directory (where your 'adb.exe' file lives). Mine was located here on my computer: C:\android-sdk-windows\platform-tools
Connect your NC to your computer, ensuring ADB is working properly ahead of time
Double-click on the file 'HoneyGAppInstall.cmd' and the script to install the new apps will run
The script will reboot your NC upon completion
Once your NC comes backup from the reboot, you can then login to the Market, select "My Apps" and they should show up right away.
I have also attached the 'build.prop' file I use. This modified file allows me to see tablet apps (NY Times Tablet, More Good News Tablet) and also I can see/download/install both Angry Birds games.
NOTE: The ro.sf.lcd_density is set to 140 in my file. This is not friendly to Zeam and needs to be set to at least 150 for that launcher to work without Force Closing in Portrait mode.
Good luck and let me know if any issues.
EDIT: For those running a build that is not new and already has the original Market setup, would be best to do the following steps after running the Gapps script:
1.) Settings > Manage Applications > All > Market: Clear Cache then Force Stop -- DO NOT Clear Data​2.) Settings > Manage Applications > All > Google Services Framework: Clear Data​3.) Reboot​
~ Razir
Would it be possible to flash the market zip through recovery? Looks like it would work in theory.
I can see all the installed apps on My Apps. Thanks for these files. But I have one problem. My Nook no longer shows up on market.android.com. Anyone else have this problem?
Is Youtube working?
JaysFreaky said:
Is Youtube working?
Click to expand...
Click to collapse
HQ videos don't work. If you disable HQ it works.
Vasanth said:
I can see all the installed apps on My Apps. Thanks for these files. But I have one problem. My Nook no longer shows up on market.android.com. Anyone else have this problem?
Click to expand...
Click to collapse
I don't use that site much, but I did just check it out of curiosity.
I verified it was working by going into: My Market Account > Settings tab. I can see "LogicPDZoom2" with last access of today's date.
bdcrim said:
Would it be possible to flash the market zip through recovery? Looks like it would work in theory.
Click to expand...
Click to collapse
Not being a dev, I don't know how to compile the files I attached and make them flashable.
However, I can tell you that I do have a black-themed Market by Darkslide for my DroidX that is flashable via CWR, but sadly, it did not work for me. I tried it by booting to the CWR SD card. Would have been nice to have the black-themed version.
I also have a flashable version of Zeam, but again, did not work for me.
Now, I have not tried it by going into CWR using Sam's method with his built-in utility. This is because I have not really been able to get that to work 100% of the time and also because it is just so easy to get to CWR via the bootable SD card that I have not really messed with it too much.
I can post the black-themed Market if someone smarter than me wants to take a look at it...might prove useful. I am just not sure if a DX file can be used on the NC
Just let me know and maybe we can figure it out together.
Vasanth said:
HQ videos don't work. If you disable HQ it works.
Click to expand...
Click to collapse
And you have to be pretty fast at disabling that little "HQ" icon in the top-right corner of the screen. From my experience, has to be almost instantaneous by the time it appears on the screen or the video won't load.
360Razir said:
I don't use that site much, but I did just check it out of curiosity.
I verified it was working by going into: My Market Account > Settings tab. I can see "LogicPDZoom2" with last access of today's date.
Click to expand...
Click to collapse
Thanks for checking. I did mess around with the build.prop you provided. I think I messed something up. I will use the file you provided without any changes.
Thanks.
Not being dev minded, I don't know how much help I would be. I was able to extract the apks from the zip file and move them with root explorer, changed permissions and it appears to be holding. Have rebooted twice and still good. Your script in the zip file would not work with cwr since it is windows based, I think. I don't know if the apks would install in recovery without a script, seems like it would not. Anyway, thanks for putting this together. Market works with the apks and the build. prop seems to have helped as well. Thanks again.
360Razir said:
Not being a dev, I don't know how to compile the files I attached and make them flashable.
However, I can tell you that I do have a black-themed Market by Darkslide for my DroidX that is flashable via CWR, but sadly, it did not work for me. I tried it by booting to the CWR SD card. Would have been nice to have the black-themed version.
I also have a flashable version of Zeam, but again, did not work for me.
Now, I have not tried it by going into CWR using Sam's method with his built-in utility. This is because I have not really been able to get that to work 100% of the time and also because it is just so easy to get to CWR via the bootable SD card that I have not really messed with it too much.
I can post the black-themed Market if someone smarter than me wants to take a look at it...might prove useful. I am just not sure if a DX file can be used on the NC
Just let me know and maybe we can figure it out together.
Click to expand...
Click to collapse
bdcrim said:
Not being dev minded, I don't know how much help I would be. I was able to extract the apks from the zip file and move them with root explorer, changed permissions and it appears to be holding. Have rebooted twice and still good. Your script in the zip file would not work with cwr since it is windows based, I think. I don't know if the apks would install in recovery without a script, seems like it would not. Anyway, thanks for putting this together. Market works with the apks and the build. prop seems to have helped as well. Thanks again.
Click to expand...
Click to collapse
You are most welcome and yes, the .zip is not flashable for CWR. XDA will only allow for certain types of files to be uploaded and .zip is one of them, so easier for me to go that route.
Files in the .zip are meant to be extracted into the folder where ADB.exe exists in order for the script to work correctly. As stated in the OP, I have only tested this on a Win7 box, as that is the only platform I have access to at the moment.
Root Explorer will also work, as you already know. So, for those who want to go that route, it is certainly an option. Glad things are working well for you at this point. Thanks for your feedback!
I'm just checking. These are the Android 3.0 gapps from the XOOM, not the 2.3 gapps? (Sorry I'm a little tired and don't have the emmc version installed, I run the SD card version, so I can't test ATM)
kdb424 said:
I'm just checking. These are the Android 3.0 gapps from the XOOM, not the 2.3 gapps? (Sorry I'm a little tired and don't have the emmc version installed, I run the SD card version, so I can't test ATM)
Click to expand...
Click to collapse
2.3, not 3.0.
Just transferred all the apps and the build.prop to a stale build of eMMC 2nd (3 days of use) and other than using root explorer followed the instructions to a T. My apps seemed to work but not thinking I updated maps in the market and now it doesnt work. Tried to uninstall updates in market (didnt seem to even finish the process), replace with my original apk, replace with apk from your zip here, clearing cache and data. Nothing seems to bring it back to life. Anyone else have this problem?
P.S. I think the white wifi icon looks nice.
Sent from my LogicPD Zoom2 using Tapatalk
Just used a combination of Root Explorer and ADB (for the chmod) to use your mod and everything is working great. Thanks a ton for posting this!
Only change I had to make was the LCD Density in the build.prop since I want to use Zeam. I tried using the default launcher but it is so laggy, I just can't.
lospulpo said:
Just transferred all the apps and the build.prop to a stale build of eMMC 2nd (3 days of use) and other than using root explorer followed the instructions to a T. My apps seemed to work but not thinking I updated maps in the market and now it doesnt work. Tried to uninstall updates in market (didnt seem to even finish the process), replace with my original apk, replace with apk from your zip here, clearing cache and data. Nothing seems to bring it back to life. Anyone else have this problem?
P.S. I think the white wifi icon looks nice.
Sent from my LogicPD Zoom2 using Tapatalk
Click to expand...
Click to collapse
Did you get your Maps back and working yet? If not, PM me and we can work on it together, offline. And if we can get it to work, we can post the "method to our madness" here in case others have done the same.
911jason said:
Just used a combination of Root Explorer and ADB (for the chmod) to use your mod and everything is working great. Thanks a ton for posting this!
Only change I had to make was the LCD Density in the build.prop since I want to use Zeam. I tried using the default launcher but it is so laggy, I just can't.
Click to expand...
Click to collapse
Glad all is working for you and that is a good point...I will update the OP to let folks know the build.prop has the LCD Density set at 160, which is not Zeam portrait-mode friendly.
Thanks for the feedback!
Okay, just downloaded the new Amazon Appstore and installed Angry Birds Rio (the first Free App of the Day). Force Close... so I tried both 140 and 160 LCD Densities and still no luck. Tried both of the other Angry Birds (original & seasons) and they force close on all three densities as well.
Any thoughts on why you are able to run them but I can't using the same build.prop? The only thing I had changed from your build.prop was the LCD density, but as I said, even changing it back to match your original setting doesn't make Angry Birds work.
Angry Birds and Angry Birds Seasons work for me. I had to move them to the internal memory. I already tried moving Rio to internal memory, however it still FC's. I can get the game to almost start, but when it's time to start shooting, it FC's. I haven't tried changing the LCD density.
Same issue here with Rio. Tried internal and no dice. Doesn't run at all when on SD.

Help restoring Facebook App

i deleted my facebook app from my tablet yesterday and now i cannot find it in the market, i downloaded a FB apk from this forum but it gives me a log in error. is there a way to get my archos tablet back to the orginal setting i tried reformatting , reset android all and i still cant get it to work..
i did the market hack about 50 times already too. i have SDE installed too i was on uruk droid at one point and i went back to the archos firmware.
anyone?
I used Titanium Backup on my phone to back up the apk and then used dropbox to get it to my Archos.
i can download it using app lib but when i log in it gives me an error
i wish there was a way to wipe everything off like everything just have a blank slate and then re install android. like i want it to be like the first time i turned the darn thing on
Here is the APK for 1.6.1. Its not the latest but it works
http://www.freewarelovers.com/android/download/temp/1311033049_com.facebook.katana.apk
markppc6700 said:
i can download it using app lib but when i log in it gives me an error
i wish there was a way to wipe everything off like everything just have a blank slate and then re install android. like i want it to be like the first time i turned the darn thing on
Click to expand...
Click to collapse
Mark, there is a way to wipe and start over.
Go to settings/repair and formatting...you can reset android which will just kind of reset everything back to new but won't delete anything. Or you can do a "full re initialization" (thats what they call it) and that will wipe everything. It will be like it just came out of the box.
bug splat said:
Here is the APK for 1.6.1. Its not the latest but it works
http://www.freewarelovers.com/android/download/temp/1311033049_com.facebook.katana.apk
Click to expand...
Click to collapse
Thanks for the .apk, I needed it too.
cant log in to FB still
there is something wrong beyond maybe i will go back to a really old version of android and try to do it that way, after the updates nothing really worked right

[App]One Click Unroot[WIP]

I am proud to present you with: Nook Tablet Unrooter One click APP!
By Indirect​​
Information?: Well, the way to best unroot the nook tablet (as it's easy to see if you have done mods to it) is to do a factory system restore, so I decided why not exploit that and make it into an application? Well that's exactly what I did and best of all, it's 1 click (technically 3 but i don't count accepting SU permissions as part of the app). You need to grant SU both times it asks for it to automatically reboot.
Code:
//I take no responsibility what happens with this application or your device and assume that any problem during this process if user fault.
//
Download link?:
http://dl.dropbox.com/u/15069134/Nookunrooter.apk
Instructions?:
Install app, open, click button, grant SU permissions (twice), and let it restore. That's about it.
Warnings?:
You WILL lose ALL data on the tablet except the Sdcard. Be sure to back everything up using titanium backup.
Changelog?:
Code:
1.2: Initial release
Credits?:
Code:
Dodgejcr for his code on github so I just had to change a few things as well as his help in IRC. Thanks man
Myself for rewriting parts of the app to be a one click unroot for the nook tablet
Added the download link meaning it's live! I tested on my device and it worked flawlessly!
Reserved as well
Thanks for this, I have it downloaded as a just in case. Seems much simpler than the 8 or 10 failed boot techniques.
Dumb question, but I am assuming this has been tested on an actual NT?
kes00601 said:
Thanks for this, I have it downloaded as a just in case. Seems much simpler than the 8 or 10 failed boot techniques.
Dumb question, but I am assuming this has been tested on an actual NT?
Click to expand...
Click to collapse
Yeah, tested it on mine last night before release.
This does indeed work although it didn't reboot my Nook Tablet automatically. After I clicked on Unroot Device, it didn't automatically reboot. I tried rebooting it myself and then it began the process of restoring to factory. When it booted back it it was indeed unrooted. Or at least I think it is.
Is there anyway to verify that is truly is unrooted?
kingbobyjr said:
This does indeed work although it didn't reboot my Nook Tablet automatically. After I clicked on Unroot Device, it didn't automatically reboot. I tried rebooting it myself and then it began the process of restoring to factory. When it booted back it it was indeed unrooted. Or at least I think it is.
Is there anyway to verify that is truly is unrooted?
Click to expand...
Click to collapse
Get terminal emulator apk and then type su
if you get permission denied, it's unrooted. I know it's unrooted since I had to re-root.
Edit: The developer and I are working on it.
Updated app to now properly reboot the device.
Indirect said:
Updated app to now properly reboot the device.
Click to expand...
Click to collapse
BAD ASS!
Just outa curiosity are you doing a QF or a FF (quick format or factory format)
Loglud said:
BAD ASS!
Just outa curiosity are you doing a QF or a FF (quick format or factory format)
Click to expand...
Click to collapse
Factory Format.
Video: http://www.youtube.com/watch?v=XBjxZxHoUsY
suicideclown said:
Video: http://www.youtube.com/watch?v=XBjxZxHoUsY
Click to expand...
Click to collapse
I know this is off-topic, but what launcher are you using there?
kes00601 said:
I know this is off-topic, but what launcher are you using there?
Click to expand...
Click to collapse
ADW Launcher. It is what I use on my transformer and phone.
suicideclown said:
ADW Launcher. It is what I use on my transformer and phone.
Click to expand...
Click to collapse
Thanks much. Just happened to see the EX version of ADW.Launcher is 10 cents today, so went ahead and bought it.
kes00601 said:
Thanks much. Just happened to see the EX version of ADW.Launcher is 10 cents today, so went ahead and bought it.
Click to expand...
Click to collapse
Good spotting! Thanks for the tip!
nookabee said:
Good spotting! Thanks for the tip!
Click to expand...
Click to collapse
We are in the 10 days christmas sale for android market. There are a selection of apps each day that are 10 cents each. If you haven't seen that, make sure you take advantage of it. Someone already made a thread about it, but it sounds like you haven't seen it yet.
Guy, stay on topic please
Sent by breaking the sound barrier
minor concern
reverse back to factory stock without a hitch. Got all my paid content back after clicking on them one by one. Good deal.
Just curious though, will registering the same device multiple times raise a red flag with BN?
I press unroot and it just sits there. It does not reboot. I manually shutdown and startup and it does not run the wipe. Any suggestions to full unroot and wipe.
Bmeyer, run adb shell then type
Code:
su
echo -n 0000 /bootdata/BootCnt
reboot

[Q] "Download Unsuccessful"

I remember having this issue since ICS and on multiple devices running different ROMs.
What gives? I know the solution is to clear out the Download history and it still works. Just annoying that I have to do that... Does Google know about this issue??
You can also try using a browser like Opera, that helps me. But yeah it really is annoying it also happens to me both on GB and ICS
Sent from my LG-P350 using xda premium
kl323 said:
I remember having this issue since ICS and on multiple devices running different ROMs.
What gives? I know the solution is to clear out the Download history and it still works. Just annoying that I have to do that... Does Google know about this issue??
Click to expand...
Click to collapse
To be able to download certain files, you must first have an application that can run the file. If you don't have the ablity to run the file it will refuse to download, giving the download unsuccessful message.
What you say may be true. But the files I download are definitely openable. Yet they still don't download successfully until after multiple attempts or clearing the cache.
Sent from my Nexus 7 using Tapatalk 2
This may help, please help confirm
Hello everyone -- First post
I don't know if this will help, but i tell you what i experienced yesterday. I have both a HP Touchpad 32GB Wifi only and a Samsung Fascinate. I have the problem with both of them for months now. I can install anything i want from Google Play, but can not down load any other files, both from emails and websites. I can write to it with Window XP Pro machine.
Two days ago i was messing around with my Touchpad dual boot WebOS/CM7 and wreck it. Wouldn't reboot, couldn't run WebOS doctor on it or any thing. I thought it was bricked. Then i ran across a forum how to delete the volume manually and recreate them. Then install back to factory original.
Last night i got it back to 3.0.5 and installed CM9 tenderloin nightly 20121028 dual boot. First think i did was go to a website to down load a PDF file to see if this fix my download problem. File downloaded, i tried opening it, said no file associate. Jump into Google Market , installed reader, open the file, no problem. I started checking with ROM Manager for any nightly updates. There was one and i started downloading it, and moved on to installing Titanium Backup plus Root. Few minutes after dubbing around, checking CM9.I noticed that it had a download error. SO i jumped on to another website to download another file. Immediately <Untitled> Download Unsuccessful. Here we go again. Switch over to Google Market, Titanium Backup plus Root finished installing.
I remove it and root. Check to see if it fixed the problem. NOPE! still no downloading. This morning at work during break, I wiped CM9 out with ACMEUnistaller, and started over. Same install as before. No problem downloading any files so far, but i have not reinstalled Titanium Backup plus Root. I will install it tonight just to be sure and redo my Samsung Fascinate to see if i can reproduces the same results there with CM10.
Can someone else that is having the same problem confirm with their system and see if they get same result?
Not so
Sorry guys, I just reinstalled Titanium Backup plus and can not repeat it. I'll keep checking with everything that I install and any settings I change
You may have better luck with the Touchpad forum.
Other forum / thread
kl323 said:
You may have better luck with the Touchpad forum.
Click to expand...
Click to collapse
Its not just my touchpad that is having the same issue. My Samsung fascinate have the issue and it has CM10 nightly. I've search many forum site for this problem. There are many other that are having the issue with all different devices and ROM's. I
I'm currently trying to repeat on touchpad because if i mess this unit up it won't be a big deal for me. I have got it down 25 minutes or ever less removing the CM and reload it. Not so fast for me on the Samsung. So far unsuccessful repeating it. Going to try repairing Fascinate and on it.
You think this should be moved to another thread? If so please let me know.
Thanks in advance
FYI, if you change the name of the original Download folder to, say Download_old, then try the download again, it will create a new folder and download to that one. weirdly, the folder permissions are exactly the same for both folders after (rwxrwxr-x)

Categories

Resources