[Q] Is the USB/charging cable proprietary - Asus Eee Pad Transformer Prime

Is the USB/charging cable on the TF201 proprietary or is a standard cable available from third party vendors?

Proprietary

But it is the same cable used in the original tablet, right? TF101?

opentoe said:
But it is the same cable used in the original tablet, right? TF101?
Click to expand...
Click to collapse
Yes it is the same cable

Related

[Q] Where can I find the USB cable or travel charger...

Where can I find the USB cable or travel charger...I can't seem to find it on ebay or amazon...
if you manage to find one please post as I would like to buy one
USB Cable
only 3.0 USB cables work in extending the length of the charger cable from the wall to the Eee Pad Transformer
use this
http://www.monoprice.com/products/p...d=1030309&p_id=6506&seq=1&format=1#largeimage
Check the DIY thread link in my signature.
The official travel charger includes the TF101 USB3 -> proprietary 40pin connector (short length tho)
arcglide said:
The official travel charger includes the TF101 USB3 -> proprietary 40pin connector (short length tho)
Click to expand...
Click to collapse
Office Depot is much cheaper.
http://www.officedepot.com/a/products/768723/Asus-Power-Adapter-For-Eee-Pad/
I have a three foot USB extension from Monoprice and works great (has to be USB 3.0).
wootek76 said:
Where can I find the USB cable or travel charger...I can't seem to find it on ebay or amazon...
Click to expand...
Click to collapse
Look for "asusparts.eu" (no outside link possible, sorry), but the shipping cost are very expensive.
The best would be a bulk order!
DevCake said:
Check the DIY thread link in my signature.
Click to expand...
Click to collapse
^^^
That is it.

OEM USB Cable

The Rezound has a very interesting Micro-USB port that seems to have the outer shape similar to Mini-USB, but with the Micro-USB guts. The cable that comes with the phone has a rectangular plug that seems a bit longer and fits perfectly into the phone's jack. In fact, its amazing... to get the phone connected to it, you have to push the connector in until it 'clicks' into place - very solid.
My wife's DINC suffers from a slutted-out socket that now barely works anymore due to the standard Micro-USB design that seems pretty fragile. Even though a standard Micro-USB fits into the Rezound's unique socket, it doesn't have the solid feel that the OEM version has.
Does anyone know what this newer style connector is called? I would like to find a couple more cables that are longer and feel that by using this type of connector, the Rezound's port should last the life of the phone.
Thanks in advance!!!
-M
It's an MHL plug and there is more info in this thread
http://forum.xda-developers.com/showthread.php?t=1356346
Thanks dude...
A normal microUSB cable will still get the job done. It's just put in the reverse as it is on the Incredible. The tabs need to be facing up. I got 3 OEM HTC microUSB cables off ebay for like $7 bucks shipped. And the odd shaped end is probably some proprietary HTC connector, same as they had with the HeroCDMA with the miniUSB.
Marcismo55 said:
It's an MHL plug and there is more info in this thread
http://forum.xda-developers.com/showthread.php?t=1356346
Click to expand...
Click to collapse
No, it's a micro-A USB receptacle that supports MHL. There's a difference.
I would rather have the MHL cable... Feels more secure when plugged in..
Has anyone been able to find one on the internet or in store?
Sent from my ADR6425LVW
yeah the security of the MHL cable is worth not using a standard micro USB. for instance when you're using a car charger w/ a standard micro USB, the cable can tug a bit on the connector(depending on length of cable, placement of phone) and cause it to come loose & stop charging... but with the micro A USB(MHL) it's nice & secure and you don't have to worry about that happening.
Anybody have a part number for the OEM cable or best case know where to order it
The really annoying thing about the cable that comes with the phone is that you can't use it with any other micro-A/B USB ports. They seem to have intentionally shipped a cable that you can only use with this device, even though the device itself will take any micro USB plug. Thanks, HTC!
punman said:
The really annoying thing about the cable that comes with the phone is that you can't use it with any other micro-A/B USB ports. They seem to have intentionally shipped a cable that you can only use with this device, even though the device itself will take any micro USB plug. Thanks, HTC!
Click to expand...
Click to collapse
The incredible will charge with the shipped Rezound charger, granted it's got the same port. I've been using my Thunderbolt charger, kindle charger and now BB charger while at work. All get the job done.
Mordecaidrake said:
The incredible will charge with the shipped Rezound charger, granted it's got the same port. I've been using my Thunderbolt charger, kindle charger and now BB charger while at work. All get the job done.
Click to expand...
Click to collapse
I did say that any other micro USB cable would work on the phone. I have a charger from every blackberry I ever owned, the Inc charger, and a couple miscellaneous cables lying around. It's just that the one that comes with the Rezound now has to go in its own special pile of cables (all by itself) because I can't use it with any other devices. Did not try with the old phone, though. Interesting that you say HTC's physical mods to the micro USB port are the same on the Inc and Rezound, yet the Rezound ships with a proprietary cable and my Inc came with a standard micro USB plug. I'll check when I get home.
it does seem at least that yes, any microUSB cable will work with the Rezound for both charging it and connecting it to your PC.
for the most part, you really only need the MHL support if you plan on going through HDMI out, which you'd then need an MHL/HDMI adapter cable anyway.
the only benefit to the cable that comes with the Rezound is the "snug fit" bit. whereas, it'd be nice if they had a car charger with the exact same micro A USB end to it as i find that all standard micro USB car chargers aren't as snug and depending on phone placement/movement, the connection can get a bit 'loose' and sometime stop charging.
i used to use this motorola car charger but because of how the cable pulled, the connection would constantly come loose unless i used tape to hold it in place.
It's not an MHL port. It's HTC's proprietary ExtMicro-USB port first seen with the HTC Flyer. An MHL port is a standard 5pin Micro-USB A/B port that detects when an MHL adapter is used, and uses those same 5 pins to support HDMI output. If you look at MHL ports on phones like the Evo 4G and Galaxy S II, they are indistinguishable physically from standard Micro-USB B ports. HTC's ExtMicro-USB is compatible with 5pin Micro-USB cables and 5pin MHL adapters. In fact, if you look at the HTC MHL adapter, it's shaped like a standard Micro-USB plug and only has 5 pins. What's different about ExtMicro-USB is that it has some extra pins compared to standard Micro-USB and MHL. I believe it has 6 extra pins, for a total of 11 pins. Those 6 extra pins are not used for MHL, for the reasons stated above. I'm not certain what those pins are used for, but if it's the same as the older ExtUSB (which is compatible with Mini-USB), then those extra pins are used for analog audio output, for use with stereo headsets, etc.
Why would they send you a cable for anything other then the phone #dumb.
Sent from my ADR6425LVW using xda premium
brisdaddy1207 said:
Why would they send you a cable for anything other then the phone #dumb.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
The cable IS for the phone. You can use it to charge and sync. But the PORT can also be used to hookup an MHL adapter for HDMI output. That is IN ADDITION to charging or syncing via USB. The cable that comes with the phone just has a different connector yet is backwards compatable with any regular micro-USB cable.
I'm not sure why this is so confusing to people.
That being said...
Has anyone found a part number or where to buy cables with the non-standard connector?
I have plenty of micro-usb cables, and yes, they do work fine, but I am not confortable with how loose they are. WAY too much play. This especially worries me in the car.
etjrowe said:
That being said...
Has anyone found a part number or where to buy cables with the non-standard connector?
I have plenty of micro-usb cables, and yes, they do work fine, but I am not confortable with how loose they are. WAY too much play. This especially worries me in the car.
Click to expand...
Click to collapse
Yea I have been trying to find this too. I was sent the Rezound as a CLNR for my Charge so I didn't even get the original USB cable that comes with the phone when you buy it. Sure the micro-usb cables work, but they feel pretty loose compared to other phones that are designed for micro-usb specifically.
ok guys this is NOT an MHL cable. as said before there is nothing special at all about it besides that it is a snugger fit. any micro usb will work with MHL and you still need the converter.
NilsP said:
Anybody have a part number for the OEM cable or best case know where to order it
Click to expand...
Click to collapse
It took some digging but here it is http://www.wirelessground.com/htcm400.html
dabomb697 said:
It took some digging but here it is http://www.wirelessground.com/htcm400.html
Click to expand...
Click to collapse
thanks. I will have to check this one it out but HTC is kind of jerking our chain with the part number. Turns out they used to same part number on all their later model cables. I ordered 3 different HTC OEM cables and they do work for charging and data but none of them had the snug snap-in feel as the one that came with the phone.
NilsP said:
thanks. I will have to check this one it out but HTC is kind of jerking our chain with the part number. Turns out they used to same part number on all their later model cables. I ordered 3 different HTC OEM cables and they do work for charging and data but none of them had the snug snap-in feel as the one that came with the phone.
Click to expand...
Click to collapse
I know what you mean. I put the part number in and the one that came with the Inc kept coming up. This one looks like it has the same shape as the one that comes with the Rezound.

confused about USB cable

it seems that some people on the forum say they have a standard micro USB connector on the Flyer??? and most of the ebay sellers list standard micro usb products for the HTC Flyer
MY connection is a proprietary one - it looks like a micro usb but has a 'step' in it
like this one...zoom in on the picture
http://www.expansys.com.au/htc-flyer-data-cable-dc-t500-extmicro-usb-12pin-white-209995/
wtf is going on?
Try it, you will like it, except for charging.............
try what? what will i like? what about the charging?
off the shelf micro usb works fine.
The proprietary style is only for charging
If u have a micro usb cable then u have to put it in the opposite way. Like this
Sent from my PG86100 using XDA Premium App
It's a generic micro USB connection. The extra's is just that, extra. And not mandatory. I read somewhere (could be here, could be somewhere else) that they made the different connector so you wouldn't use the charger on a device that can't handle the power. But you can use any micro USB cable to connect the device to your PC. And you can even use any micro USB charger, but you'll need a lot of patience as it'll take a long, long time!
While you can use a standard micro USB cable, I have heard it would be better to use the HTC one because it will stay in better. I have used a standard one just fine, but the HTC one does hold in better IMO.
vj092887 said:
If u have a micro usb cable then u have to put it in the opposite way. Like this
Click to expand...
Click to collapse
Its both proprietary AND standard. As vj092887 said, you insert the micro-USB male plug "upside-down" from how you would on most HTC devices. And it plugs into the "bottom half" of the jack. All this is in respect to the tablet laying flat, with the screen facing up.
If you use the included charger or sync cable, it takes up the "whole" jack. Sync doesn't really make a difference. But the included charger is much faster than standard HTC Micro-USB chargers.
jeebus on a swizzle stick, only after reading this did i actually shove a standard micro usb into it and i'll be damned.....
thanks guys
n7of9 said:
jeebus on a swizzle stick, only after reading this did i actually shove a standard micro usb into it and i'll be damned.....
thanks guys
Click to expand...
Click to collapse
Shortly after I got my Flyer, I was at work and wanted to connect it to my laptop. And realized I had left my (HTC) cable at home, sticking in my PC there. I was also kind of disappointed as I had bought the flyer specifically because you could use a micro USB cable!
So, I thought, well, why not try it and see if it fits. And as I generally always first try to stick a cable in upside down (don't ask me why, even if I think about it, I'll try it upside down first ), I got lucky this time and found it fitted
Sweetpea8472 said:
Shortly after I got my Flyer, I was at work and wanted to connect it to my laptop. And realized I had left my (HTC) cable at home, sticking in my PC there. I was also kind of disappointed as I had bought the flyer specifically because you could use a micro USB cable!
So, I thought, well, why not try it and see if it fits. And as I generally always first try to stick a cable in upside down (don't ask me why, even if I think about it, I'll try it upside down first ), I got lucky this time and found it fitted
Click to expand...
Click to collapse
USB cables tend to go in the right way on the third try!
Sweetpea8472 said:
And as I generally always first try to stick a cable in upside down (don't ask me why, even if I think about it, I'll try it upside down first ),
Click to expand...
Click to collapse
i NEVER put in cables upside down (because i always put a little dot on the top side of the connector using nail polish...you can use liquid paper for a more 'manly' experience)
Is there a source for an innexpensive extra cable? I've been using a standard micro USB and it works but feels very loose compared to the official HTC cable that came with my flyer.
Sent from my Transformer TF101 using Tapatalk
If you mean with a HTC style power connector, no, that's for charging only. For data cables Ebay or Amazon has them for about $1 each.
DigitalMD said:
If you mean with a HTC style power connector, no, that's for charging only. For data cables Ebay or Amazon has them for about $1 each.
Click to expand...
Click to collapse
I wouldnt buy those generic cables from ebay/amazon etc they are poorly made and can either break off in your device, break off the connector on the device, or short out.. I highly recommend getting either Motorola or HTC OEM cables. They cost $2 - $5 but its worth it.
http://www.amazon.com/Motorola-SKN5...1?s=electronics&ie=UTF8&qid=1323629211&sr=1-1
Does this mean that the MHL adapter with 5 pins will work (standard Micro USB), and I don't need the 12 pin MHL version (extMicro USB)?
galfert said:
Does this mean that the MHL adapter with 5 pins will work (standard Micro USB), and I don't need the 12 pin MHL version (extMicro USB)?
Click to expand...
Click to collapse
yes! but apparently it charges really slowly so microUSB is best left to data transfer only
str8upx said:
I wouldnt buy those generic cables from ebay/amazon etc they are poorly made and can either break off in your device, break off the connector on the device, or short out.. I highly recommend getting either Motorola or HTC OEM cables. They cost $2 - $5 but its worth it.
http://www.amazon.com/Motorola-SKN5...1?s=electronics&ie=UTF8&qid=1323629211&sr=1-1
Click to expand...
Click to collapse
Perhaps I wasn't clear enough. Although a standard micro USB connector works for me when transferring data I don't like how loose it seems in the Flyer's socket. So I want another cable just like the one that came with my Flyer, a micro ExtUSB cable. I've only found mini ExtUSB cables not micro ones, hence my request for an inexpensive cable source.
Sent from my Transformer TF101 using Tapatalk
bsoplinger said:
Perhaps I wasn't clear enough. Although a standard micro USB connector works for me when transferring data I don't like how loose it seems in the Flyer's socket. So I want another cable just like the one that came with my Flyer, a micro ExtUSB cable. I've only found mini ExtUSB cables not micro ones, hence my request for an inexpensive cable source.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
there are no inexpensive extUSB cables...i don't know where you are but try expansys or amazon in your country...they're all upwards of $20
There is no 3rd party source for the non-standard HTC proprietary connector.
HTC manufactured Windows Mobile and Android-based devices have a proprietary connector called HTC Micro ExtUSB (Extended USB). ExtUSB combines Micro-USB (with which it is backwards-compatible) with audio input as well as audio and video output in an 11-pin connector. The extra pins also allow for higher charging currents.
If you really want to spend on a high quality cable, here you go, the best, most expensive per foot USB micro cable in the world . For ~$25 this should keep your Flyer and small pets from bursting into flame............
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4256657&CatId=77
By the way, all the generic or other brand MHL adapters work fine with the HTC for connection to HDMI.

DIY OTG Cable

Has anyone made an OTG cable for the TFP? I don't like the chunky USB OTG connector and thought an OTG cable would be much better.
Not quite sure what you mean.
The only proper usb connector is a standard type A connector located on the keyboard, it has insufficient pins to implement OTG. The only other usb connectors are the propriety asus ones, one on the tablet and one on the keyboard, the other small connector on the tablet is HDMI output
I have the "chunky" USB OTG connector as well.. I don't think there's a cable though... I looked everywhere on the net
I don't have a dock therefore the only way I can plug a USB flash drive, Keyboard/mouse into the TFT is via the ASUS USB OTG Host adapter View attachment 1384503
I was after something a little slimmer and believe a OTG cable would be ideal - Refer to picture for an example of what I'm referring to View attachment 1384504
Micro USB OTG cables can be used with many phones and tablets sporting a micro USB connector. The TFP obviously doesn't have a micro USB connector therefore I was hoping someone knew how to make an ASUS 40 pin to female Type-A plug which replicates the ASUS USB OTG Host adapter.
Has anyone pulled apart the ASUS USB OTG host apapter? What's inside it?
Hey guys. There are several articles and videos around on how to make your own OTG cable. It essentially involves shorting a single pin. I have no idea if it'll work with a TFP, but I'm going to give it a shot today or tomorrow if I get some time. My plan is to use the normal TFP USB cable, but plug it into a female/female USB gender changer that has been modified to short the pin. I'm almost positive that it'll work on my SGS3, and I don't see why it wouldn't also work for my TFP. I'll report back.
Nevermind. I now see that the TFP USB end has five pins, so they won't match up with the 4-pin female USB port. Oh well...
TFP and OTG
Does anyone know if the OTG will support a USB hub?
gtan2589 said:
Does anyone know if the OTG will support a USB hub?
Click to expand...
Click to collapse
The TFP doesn't have OTG, it's a regular USB host.
So yea, it will support a hub because it's a standard USB device class, with its driver already part of the kernel.

UPDATE USB type c not working

UPDATE:
my fault. Didn't remember I disabled the thunderbolt feat in the bios.
Hi, I got a USB type c 3.1 which I connect to the 3.1 type c port of my computer. When I connect the mobile it only charges it. Trying with installing latest (1.5.65) Samsung drivers to no avail.
Want to use it to transfer files.. What's wrong with what?!
ujh said:
Hi, I got a USB type c 3.1 which I connect to the 3.1 type c port of my computer. When I connect the mobile it only charges it. Trying with installing latest (1.5.65) Samsung drivers to no avail.
Want to use it to transfer files.. What's wrong with what?!
Click to expand...
Click to collapse
Your cable may not have wires for data transfer? Try a cable certified for data.
Sent from my SM-G965U using Tapatalk
It works with other phones, s9 displays fast charging.. Is there a way to change it to mtp or something?
Did you buy a cheap cable from Amazon or Ebay, possibly an uncertified cable? If so, that's probably the reason why. Unfortunately the cheap cables are not wired correctly and do not support all the features.
Post a link to the cable you purchased and we can better determine the cause. Also, what kind of computer do you have? Laptop? Desktop? Proper USB 3.1 drivers installed for the port? Etc.
ka24e said:
Did you buy a cheap cable from Amazon or Ebay, possibly an uncertified cable? If so, that's probably the reason why. Unfortunately the cheap cables are not wired correctly and do not support all the features.
Post a link to the cable you purchased and we can better determine the cause. Also, what kind of computer do you have? Laptop? Desktop? Proper USB 3.1 drivers installed for the port? Etc.
Click to expand...
Click to collapse
It's an €20 amazon basics cable.. Asus z170 Pro native Intel 3.1 type C port
Are there different kinds of type-c cable? Or the data transfer of type-c cables are easily destroyed?
d0ct0race said:
Are there different kinds of type-c cable? Or the data transfer of type-c cables are easily destroyed?
Click to expand...
Click to collapse
Mh?

Categories

Resources