I'm trying to flash CWM to my daughter's new GT I5500 but keep running into the above error message. The same thing happens after rebooting the phone (into recovery download mode), with different USB ports, different USB cables and with 2 different Windows 7 PCs. Any ideas? I've used Odin 4.28 & 4.34 and have the correct Samsung USB drivers installed. Thanks
Managed to get it to work on my Windows XP laptop so it must have been a drivers problem.
dwl99 said:
Managed to get it to work on my Windows XP laptop so it must have been a drivers problem.
Click to expand...
Click to collapse
Download and install Samsung kies for the drivers.
Update Keis and try again and set to download mode, maybe that will work.
LightWaveX said:
Update Keis and try again and set to download mode, maybe that will work.
Click to expand...
Click to collapse
Thanks, I already tried all that before posting but it didn't work. It's a bit of a pest having to boot my lappy into XP to do any flashing but at least it works.
Uninstall KIES,reboot,install KIES and driver,reboot. Plug it in to the other usb port,it should work
Sent from my blek krupuk
have you tried running as administrator in Windows 7? (right click -> run as administrator)
for me it failed with the same error till i've started running as admin.
if this doesn't work go to compatibility properties and check Always runs as administrator, then right click, run as admin.
rpadula said:
have you tried running as administrator in Windows 7? (right click -> run as administrator)
for me it failed with the same error till i've started running as admin.
if this doesn't work go to compatibility properties and check Always runs as administrator, then right click, run as admin.
Click to expand...
Click to collapse
Thanks, yes I had tried that as well. I spent some time looking for a solution online prior to posting & it seems to be quite a widespread problem.
well today i started having the same problems as you...
had try in another computer (Win7) and worked flawlessly
rpadula said:
well today i started having the same problems as you...
had try in another computer (Win7) and worked flawlessly
Click to expand...
Click to collapse
Were either of your PCs running Win7 64-bit?
The drivers don't work in Windows 8 Pro 64 bit
Related
I have tried everything to get these drivers to work, tried installing them on windows vista, windows 7, using compatibility mode, using a virtual machine to install it on windows xp, downloaded three different types of versions of windows xp and I still can not get these drivers to install on anything.
I've searched the forums; I've lurked all throughout google and youtube. I can not find the solution. Will somebody out there please for the love of god help me. This is the 4th day I've tried to continue the process of flashing my phone to boost and I haven't even gotten past this very first step.
did you manually go through device manager and try to update the drivers?
heathmcabee said:
did you manually go through device manager and try to update the drivers?
Click to expand...
Click to collapse
How would that even work out ? The phone won't even register on the device manager without the drivers or having a microsd card which is just for accessing my micro sd data.
gus122000 said:
I have tried everything to get these drivers to work, tried installing them on windows vista, windows 7, using compatibility mode, using a virtual machine to install it on windows xp, downloaded three different types of versions of windows xp and I still can not get these drivers to install on anything.
I've searched the forums; I've lurked all throughout google and youtube. I can not find the solution. Will somebody out there please for the love of god help me. This is the 4th day I've tried to continue the process of flashing my phone to boost and I haven't even gotten past this very first step.
Click to expand...
Click to collapse
Try another download of the driver....It will ONLY work with Windows XP, I ran virtual pc on my Win 7 computer, load driver in virtual pc session and be sure you can access your usb port in virtual Pc. When I get home, If you need it I'll upload the driver I used.
louforgiveno said:
Try another download of the driver....It will ONLY work with Windows XP, I ran virtual pc on my Win 7 computer, load driver in virtual pc session and be sure you can access your usb port in virtual Pc. When I get home, If you need it I'll upload the driver I used.
Click to expand...
Click to collapse
Please do because I'm running out of ideas.
gus122000 said:
Please do because I'm running out of ideas.
Click to expand...
Click to collapse
Never mind I figured it out, it was the drivers. Got another copy. I'm now working with QXDM but having trouble with it, the command bar is greyed out and I'm not sure why.
gus122000 said:
Never mind I figured it out, it was the drivers. Got another copy. I'm now working with QXDM but having trouble with it, the command bar is greyed out and I'm not sure why.
Click to expand...
Click to collapse
Has qxdm been set up to read the port number you phone is using?
louforgiveno said:
Has qxdm been set up to read the port number you phone is using?
Click to expand...
Click to collapse
How do I do that ?
gus122000 said:
How do I do that ?
Click to expand...
Click to collapse
preferences or settings tab....if not try establishing the port with qpst or cdma ws and go from there
someone please hook me up with a good copy of these drivers, I'm on windows xp and they will NOT install, I've only found 1 active link with these drivers, the rest of the links i'm finding went down with megaupload
mjrsplat said:
someone please hook me up with a good copy of these drivers, I'm on windows xp and they will NOT install, I've only found 1 active link with these drivers, the rest of the links i'm finding went down with megaupload
Click to expand...
Click to collapse
BAM !! Hit the Thanks Button
louforgiveno said:
BAM !! Hit the Thanks Button
Click to expand...
Click to collapse
Im on win 7...i keep getting error message with this file....Someone plz help me
Skooney said:
Im on win 7...i keep getting error message with this file....Someone plz help me
Click to expand...
Click to collapse
A couple of posts up, he states that the drivers only work with windows xp. Try installing a virtual machine.
Sent from a Toasted Devil
Drivers 32 bit only
netwokz said:
A couple of posts up, he states that the drivers only work with windows xp. Try installing a virtual machine.
Sent from a Toasted Devil
Click to expand...
Click to collapse
Skooney said:
Im on win 7...i keep getting error message with this file....Someone plz help me
Click to expand...
Click to collapse
actually the drivers will work with xp 32 bit as well as windows 7 32 bit but not with vista......just make sure to install the drivers for the incognito before you plug in the phone as its easier that way....
IF I HAVE HELPED PLEASE HIT THANKS BUTTON.}}}
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Srsly? Noone care to respond?
google it for samsung usb driver
then download and install
XeactorZ said:
google it for samsung usb driver
then download and install
Click to expand...
Click to collapse
Thx for reply, but ofc I already done that.
Install Kies, it should be enough
《tapatalked from galaxy s3》
compatibility mode
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
Try right click - compatibility mode you should be able to install.
bala_gamer said:
Install Kies, it should be enough
《tapatalked from galaxy s3》
Click to expand...
Click to collapse
Samsung Kies 2.3.3.12085_7_5 work with Windows 8 9200...:good:
I'm using windows 8 x64, I had no trouble installing the drivers.. I just put the phone in download mode and connected the usb cable and the drivers were automatically installed.
Sent from my GT-I9300 using xda app-developers app
Hello all.
I too have Windows 8 RTM 9200 x64.
Kies 2.3.3.12085_7 INSTALLS fine, and the app RUNS fine.
Also, when I put the phone in download mode, Win8 DOES automatically find a device, but....
1. Kies can never find the phone (obviously not when in download, I mean in normal mode). Just keeps telling me to turn off debugging (which is not on!). Tells me: "Reconnect the device in Samsumg Kies (PC Studio) mode. Current connection mode not supported by Kies. Check USB settings."
2. Odin 1.85, 1.87 and 3.04 can never see the phone in download mode. Just nothing as if not connected.
For you guys who have it working in Win8, can you confirm that Kies can actually SEE the phone (running the app is the easy bit!), and that if you go into download mode, that Odin can see the device?
I can pass things thru on a virtual USB port to a Virtual Machine of Win7, but cant never actually get any functional use in (host) Win8.
Thanks.
EDIT: I downloaded Kies from Samsung page and it seems to be very slightly newer than mine, now version 2.3.3.12085_7_5. NOW, Odin CAN see the device in download mode which is what I really wanted for flashing purposes. Kies itself now no longer instantly complains about the USB setting, but iinstead just spins its wheel and never connects. But Kies stinks and never use it anyway, so not too fussed. Really just wanted Odin so that's cool.
Downloaded THIS Kies: http://www.samsungapps.com/about/onPc.as
Can you extract the USB Driver msi from the instllation and upload it here? Thanks!\
Edit:
Found it!
http://www.mediafire.com/?4y1a2opm8o3ihfx
Now my Note is back under my Windows 8 64x RTM!
Interesting!
Your mediafire download LOOKS like the same version that my Kies installed, but when I installed your version over my pre-existing one, now Kies can see my phone!
Excellent!
Thanks!
Hope this all helps someone else too.
I ran Windows 8 for exactly 2 days. I ain't gonna touch that with a 10ft pole ever again. Went back to Win7.
Lemme just tell ya: Windows 8 sucks big time. It's so bad it both sucks and blows at the same time.
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
¦¦
\/
Signature that should help you ^^
EDIT: Use the search button. Prevemts spam, and unneccessary threads, like this. I posted that thread in the Android general Discussion and Galaxy Nexus forum. Works on all phones..
I love windows 8 and am going to give these a go. Thank you.
Sent from my SCH-I535 using xda premium
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
i just installed win 8 m gonna try win 7 drivers in compatibility mode...will let you knowifit works
---------- Post added at 04:53 PM ---------- Previous post was at 04:37 PM ----------
nerotix said:
Hello there,
I was wondering if someone already has Windows 8 installed and was able to connect his phone and get the USB Drivers installed. Been struggling with it for hours and still can't get the USB Drivers installed.
Using Windows 8 RTM x64.
Anyone could help me with this problem perhaps?
Thanks!
Click to expand...
Click to collapse
hi i just tried windows 7 usb drivers for s3......and guess what ...................IT WORKS.....all you have to do is run the drivers in compatibility mode and select windows seven
First right click on the divers file and select properties
then select compatibility
select "run this program in compatibility mode for"
then select windows seven in the drop down menu
and then select "Run this program as an Administrator"
and then press OK
DONE
double click the driver file and install it.........Enjoy
Simonetti2011 said:
I ran Windows 8 for exactly 2 days. I ain't gonna touch that with a 10ft pole ever again. Went back to Win7.
Lemme just tell ya: Windows 8 sucks big time. It's so bad it both sucks and blows at the same time.
Click to expand...
Click to collapse
Using a 4 year old Dell Latitude XT2 that originally came with Vista on it with a fresh install of Windows 8. Love the device. Multi touch screen works right away and all features work great. Having a blast with Windows 8. Just need the right hardware and it is a perfect operating system. Best of both worlds, tablet and laptop.
There's no need to install Kies to use the phone as mass storage.
Only if you want to flash things though Odin.
I'm using Windows 8 Pro 64bits and I can confirm this. :good:
Windows update Will do the job.
Connect the phone and then search on Windows update.
Sent from my GT-I9300 using xda app-developers app
Hi, got Kies update to 2.5.0.12094_28 and everything works fine under Win8. Drivers insatlled, phone found. The update has got todays date, Nov/10/2012.
Windows 8 upgrade went fine with the samsung/android drivers.. Infact everything is fine on my end (Full win7 img) just incase
Sent from my Transformer Prime TF201 using xda premium
I've looked all around for this - I got ADB drivers to install just fine so that's no issue. It's just... for some strange reason my phone works completely fine while plugged in, but the minute you go into fastboot my computer rejects it. I get a pop up saying:
The last USB device you connected to this computer malfunctioned, and Windows does not recognize it.
Click to expand...
Click to collapse
So, of course, I do a little digging and find where my DNA in Fastboot should show up in device manager.. and it says:
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Click to expand...
Click to collapse
Should I reinstall HTC Sync or something (I uninstalled it)? I'm lost. Can't think of anything to do. Shuffling around the drivers that come with the SDK doesn't help any - and my Windows 7 machine didn't have any of these issues. Too bad it's dead now
[TSON] said:
I've looked all around for this - I got ADB drivers to install just fine so that's no issue. It's just... for some strange reason my phone works completely fine while plugged in, but the minute you go into fastboot my computer rejects it. I get a pop up saying:
So, of course, I do a little digging and find where my DNA in Fastboot should show up in device manager.. and it says:
Should I reinstall HTC Sync or something (I uninstalled it)? I'm lost. Can't think of anything to do. Shuffling around the drivers that come with the SDK doesn't help any - and my Windows 7 machine didn't have any of these issues. Too bad it's dead now
Click to expand...
Click to collapse
Alright, so you're going to want to have HTCSync installed, then after thats done, go to your device manager and select your device (not sure what it will be under, but it will have a (!) sign next to it). Download these drivers and use the "have disk" thing when looking for drivers in device manager. Make sure your DNA isn't plugged into a USB3 port, and then fastboot should work for you.
inexplicability said:
Alright, so you're going to want to have HTCSync installed, then after thats done, go to your device manager and select your device (not sure what it will be under, but it will have a (!) sign next to it). Download these drivers and use the "have disk" thing when looking for drivers in device manager. Make sure your DNA isn't plugged into a USB3 port, and then fastboot should work for you.
Click to expand...
Click to collapse
Ran into this yesterday. My computer ONLY has USB3 so I was unable to get it to work. Tried on a Win7x64 machine and did it first time no problem. Sigh...
Whoops, thought I posted this already... But yeah, that didn't fix the problem. Same two errors no matter what drivers I use.
[TSON] said:
Whoops, thought I posted this already... But yeah, that didn't fix the problem. Same two errors no matter what drivers I use.
Click to expand...
Click to collapse
I don't have any tips for you, other than to say that I've had fastboot work with my DNA on 2 different win 8 64 machines.
I *think* I got my drivers from HTCSync, and then uninstalled HTCSync, but not the drivers afterwards.
I did have problems with fastboot and adb when I was playing around with the CM10 build that is available here. Maybe try switching your rom and kernel?
[TSON] said:
Whoops, thought I posted this already... But yeah, that didn't fix the problem. Same two errors no matter what drivers I use.
Click to expand...
Click to collapse
I ran into the same exact issue on my win8 64-bit machine. luckily i have a couple usb2 ports and they work just fine. i wonder if using a usb hub that is compatible with usb2 or lower would work.
Did you try disabling driver signing in Windows 8 pretty sure thats the problem.
Here
Yeah you have to do that in order to install the universal driver or any other unsigned drivers - but once the drivers are installed you're good to go. No matter which drivers I pick I have this problem, I've tried probably 7 different ones.
Works fine on my Vista laptop but that things about to creak... Just used it to S-OFF and it took over an hour to turn on :crying:
EDIT: And for what it's worth, doesn't matter if it's a USB 3.0 or 2.0 - same error. Doesn't work on stock or on Cubed/Viper (though this is fastboot so kernel/ROM shouldn't have anything to do with 'em).
tried the following:
-use other computer(also w7 64bit--»same issue)--both are asus laptops home premium version iof windows
-install official samsung drivers, no difference
-usb debugging on/off with mtp»no difference
-factory reset(4.04 currently)
-Uninstall and reinstall drivers
All in all windows does not recognize this tablet for me. I just bought this tablet,
Something im doing wrong?
The tab charges fine via wall charger
I just want to put files on this tablet with windows via usb.
Please help me sort this out.
Have you tried plugging in the tablet with the drivers being uninstalled? It may work. I've had this problem before but I had Kies installed on the pc and all I had to do was update the program.
Jay Rock said:
Have you tried plugging in the tablet with the drivers being uninstalled? It may work. I've had this problem before but I had Kies installed on the pc and all I had to do was update the program.
Click to expand...
Click to collapse
Yea i did but windows still gives the same "usb device not recognized" . Ill try removing everything concerning drivers and will try again
Ow and btw GTP7510MAYXAR is the model.
http://forum.xda-developers.com/showthread.php?t=1837529
i have the exact same problem. HElluuuup! :crying:
teun3sixty said:
http://forum.xda-developers.com/showthread.php?t=1837529
i have the exact same problem. HElluuuup! :crying:
Click to expand...
Click to collapse
My Windows 7 64 bit system has no problems recognizing my P7510.
The only times when I've seen that error (unrecognized device) is when the cable I was using was bad. I wasted several days fighting that.
The only other suggestion is to plug in the tablet, then bring up the device manager. Right click on the failed device and choose "Uninstall". Disconnect, then remove Kies, remove the drivers, then reinstall Kies and the drivers. Maybe that'll get it recognized.
Hi. First of all I want to excuse me that I' m asking a common thing several times threated in other posts.
I'm working now 2 days on getting another rom on my lemax 2.
I have installed the driver for the phone on my windows 7. system manager shows a propper installation. ADB driver's have been installed. The phone is in developper mode and oem and usb debugging is turned on. I switched to MTP and to PTP to make my device visible for ADB. But when I'm trying to see if my computer shows the mobile phone in CMD with the following command "adb devices" there will never be something listed! I tried already a lot... Uninstalling drvers for ADB, tried different drivers... And so on... Does anybody have an idea to help me??
Same problem here. Phone doesn't show, ADB can't connect. I am starting to get frustrated.
Most likely a problem with the usb driver, did you try another phone? I had the same problems and ended up doining it under linux afther a couple of hours messing in win10.
http://askubuntu.com/questions/659880/ubuntu-15-04-adb-fastboot-impossible-to-install
DeScheep
MOB* said:
Most likely a problem with the usb driver, did you try another phone? I had the same problems and ended up doining it under linux afther a couple of hours messing in win10.
http://askubuntu.com/questions/659880/ubuntu-15-04-adb-fastboot-impossible-to-install
DeScheep
Click to expand...
Click to collapse
Linux definitely is the better choice.
The fastboot drivers are different from the ADB drivers, and in Windows 10 you might have to switch the driver after fastbooting the phone.
It's really really silly and took me hours to find out.
You can change them in device manager, find the USB device there and update its driver. You don't need one from the web, just take the fastboot one from the list that Windows offers.
Sörnäinen said:
Linux definitely is the better choice.
The fastboot drivers are different from the ADB drivers, and in Windows 10 you might have to switch the driver after fastbooting the phone.
It's really really silly and took me hours to find out.
You can change them in device manager, find the USB device there and update its driver. You don't need one from the web, just take the fastboot one from the list that Windows offers.
Click to expand...
Click to collapse
I have no second android phone to test. But I tried already on OS Win 7 & 10 with different drivers on Win 7 as well. On win 10 the driver was already given by Windows, no need to install. I think that the problem has something to do with the phone, but I can't find the problem. It must be something with authorisation, that Win Os will recognize the Leeco correctly to have access.
I finally found a good working driver for WIN 10. I found it from a Chinese chatting group, so use it at your own risk.
Below is the share link.
https://drive.google.com/file/d/0BxNNPNS50QQiUk50YTliT2p5Mmc/view?usp=sharing
You will need to boot your phone into bootloader, connect to computer, manually switch the diver via 'Browse my computer for driver software" -> 'Let me pick fromm a list of device drivers on my computer"-> "Have Disk".
Hi all,
After reinstalling Windows7 32-bit on my laptop, I ran into the same issue as you guys here. What I did was to install pdanet and the adb interface worked. However, I could not get into the QDLoader 9008 and also Diagnostic Driver was not working, simply the drivers could not get installed no matter what I tried. I searched quite a lot of time how to get make it work and looks like there was a zip "QDLoader HS-USB Driver". You can google it and it has 32-bit and 64-bit installations. I am not very sure if I had to install pdanet but that was the first step to make it work, at least to have adb.
I'm sure that you guys found the answer already, but I wanted to help others as well if they run into the same issue.
valy_cta said:
Hi all,
After reinstalling Windows7 32-bit on my laptop, I ran into the same issue as you guys here. What I did was to install pdanet and the adb interface worked. However, I could not get into the QDLoader 9008 and also Diagnostic Driver was not working, simply the drivers could not get installed no matter what I tried. I searched quite a lot of time how to get make it work and looks like there was a zip "QDLoader HS-USB Driver". You can google it and it has 32-bit and 64-bit installations. I am not very sure if I had to install pdanet but that was the first step to make it work, at least to have adb.
I'm sure that you guys found the answer already, but I wanted to help others as well if they run into the same issue.
Click to expand...
Click to collapse
Thanks a lot for sharing it !!! This helped me A LOT !! :fingers-crossed: :fingers-crossed: :fingers-crossed:
I have the same problem. Tried different drivers, two computers, win10 and win7. Nothing helps...
midirt said:
I have the same problem. Tried different drivers, two computers, win10 and win7. Nothing helps...
Click to expand...
Click to collapse
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
is there any solution for this problem........my device le eco letv 2s is not listed in the adb devices.....can anyone help me....
Dhatchina said:
is there any solution for this problem........my device le eco letv 2s is not listed in the adb devices.....can anyone help me....
Click to expand...
Click to collapse
if you're sure it's not a driver issue you can try the following (solved the problem for me):
on your windows machine navigate to "c:\users\<insert your user name here>\.android" and delete the file "adbkey".
either jump directly to the folder or turn on hidden/os files in explorer and navigate there.
now plug in your phone, the rsa-key dialog should pop up.
if not, that wasn't your problem.
btw. i'm using "universal adb installer".
GC-82 said:
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
Click to expand...
Click to collapse
It helpded me a lot. Thanx.
GC-82 said:
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
Click to expand...
Click to collapse
Great, man.!. It works for me
THIS Method Works For LeEco Le Max2
GC-82 said:
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
Click to expand...
Click to collapse
This Method Works Perfectly.... After Enabling the AT port.. the drivers begin installing immediately. Have Patience. They will all install.
LeEco le2 is not showing up under adb devices list... tried damn lot of drivers ...What do I do??
You should post a Screenshot of your devicemanager becsuse that information is not enough.
Gesendet von meinem Le X820 mit Tapatalk
Install ADB Driver installer 2.0
dhankhar13 said:
LeEco le2 is not showing up under adb devices list... tried damn lot of drivers ...What do I do??
Click to expand...
Click to collapse
adbdriver.com/downloads/
Use this above link
1 ) Download adb driver installer software zip file
2 ) Extract the zip file
3 ) Install & Run a adb driver installer.exe file
my le2 doesn't show up in fastboot mode, but shows up once booted into system. Any idea?
Thanks!
GC-82 said:
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
Click to expand...
Click to collapse
This worked for me too!!!:good::good::good: