[Q] questions regarding my new galaxy tab - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

hi everyone,,,
i just got a new galaxy tab 10.1 3g few days back and i got some questions,,,,
* Is there any 3.2 rom which supports arabic fonts. Or a manual way of installing rtl (arabic support).
* How do i stop apps from starting in background, everytime i check there are no. of background apps running and i need to stop them manually.
* Why can my tab not play full hd videos when my galaxy s2 plays it very good . a/v goes out of sync . Am i expecting too much from my tab

I don't know about arabic suport. About full HD videos, don't expect to play 1080p mkv files on the tab, it can't handle those. I can play 720p mkv videos, but my tab is overclocked to 1.4ghz.
As for the background apps, I wouldn't worry about them, the OS will close them if it needs resouces.

But all those background apps will consume battery right,,
Sent from my GT-P7500 using Tapatalk

Related

samsung galacy s plus questions

hey guys i am planing to buy samsung galaxy s plus .i have regarding it,so please try to sove my qusetion
1>i will use the mobile for watching hi-def videos.so please tell me how to convert videos for it.previously i had galaxy 3 but i was unable to watch videos on it even though it supported mp4.so i am in doubt that sgs plus also have capablity to play mp4 videos but will it able to play it?
2>how is youtube streaming on the device?
For watching videos you could easily download a number of apps from the market which have the ability to play .mp4s. You could also download the vlc player from these forums, which I know for a fact can play .mp4s.
As for YouTube streaming, it's going to generally be the same on every device though it does depend on pixel density and the type of screen. It's SAMOLED screen should provide a colorful experience, though it does not have a very high pixel density (don't expect iPhone quality screen).

Apps and features not working with the unofficial ICS 4.0.3 update

Updated my tab to the ICS update that was linked in the general forum prior to the mediapad gettings its own forum (hurrah).
Was hoping that the tab will be blazing fast after the update, sadly don't see much of an improvement.
However the big issue is some apps are dog slow, or refuse tow work. If you have any problems with apps with the update please list and tell if you know of resolution.
Let me start.
1. ezPDF reader - Takes ages to load a PDF after the update. Rendering is very very slow.
2. Adobe PDF reader - Fast than ezPDF, but still the rendering is slower. I was expecting the 2D rendering performance to improve with ICS, but sadly no luck.
3. Browsers are very slow. Though the benchmarks might be different, the actual page load times are now slower with the native browser and on dolphin HD.
2. The very useful feature that showed running apps, and recent used apps is now missing, and you have the generic list of apps
All the adobe apps like touch, proto etc. They hang on a black screen.
Latest copilot live just fc.
Sent from my HUAWEI MediaPad using Tapatalk
Amazon Kindle (v3.3 & up) not working: all books content (text & graphic) is blank.
(it's working on ICS Beta prior this leak)
Now using old v3.2 & working well (but of course, font is less pretty & no pdf support).
1. Google Play keeps restarting
2. Google Play has issues handling multiple threads (loading an app detail screen while several apps are being updated, results in lost connection errors)
Not sure if the Google Play problems are related to ICS or the device.
rayaz said:
Not sure if the Google Play problems are related to ICS or the device.
Click to expand...
Click to collapse
Perhaps the device. Mine has been working just fine.
Quickoffice Pro HD doesn't work. I had purchased/installed it for Springboard on 3.2, but after going to 4.0.3 it was not listed in My Apps when I go to Google Play on the tablet. When going to Google Play on my PC, the app shows up as installed - but with a note that it is incompatible with all of my devices.
v35lee said:
Quickoffice Pro HD doesn't work. I had purchased/installed it for Springboard on 3.2, but after going to 4.0.3 it was not listed in My Apps when I go to Google Play on the tablet. When going to Google Play on my PC, the app shows up as installed - but with a note that it is incompatible with all of my devices.
Click to expand...
Click to collapse
Try setting the screen to high resolution and I'd bet that you will be able to install the app.
rkwhyte2 said:
Try setting the screen to high resolution and I'd bet that you will be able to install the app.
Click to expand...
Click to collapse
Good thought - I had tried that but no luck.
I was able to get Swype keyboard to install by going to high resolution, where it had previously not worked due to incompatible resolution.
Zinio isn't working for me.. App works but the magazines are just rendered as black pages.
Put SketchBook Pro on the list, fc on start.
Additionally:
* Autodesk SketchBook Express - does not start
even if there is a statement on playstore page "√ Now runs on Android 4.0 (Ice Cream Sandwich). Optimized for screen sizes 7 inches and greater."
* Navfree - blackscreen on startup (was fine on HC)
HDMI out - working, but the picture looks like a low resolution upscaled to a higher resoution.. also, when the cable is connected before enabling the HDMI output function, you need to disconnect and reconnect.. otherwise you'll get no picture at all..
tried this with HC 3.2 (B016) on the same device, with same cable/TV (Sony Bravia KDL-40W4000), and the picture looks great (like a real HD 720p/1080p resolution).. also you don't need to reconnect the cable..
EDIT: tested on two more LCD TV's..
Sony Bravia 37" (full hd) - the picture doesn't display at all.. it only blinks for a split second...
Philips 32" (hd) - the picture is displayed, but it's the same as described above with the KDL-40W4000
EDIT 27.3.2012: tested with the latest International version S7-301u_V100R002C002B008, and it's still the same :\
EDIT 29.3.2012: tested with PC monitor.. based on the information that the information menu of the monitor provides, that standar output is 640x480, which si far from HD/FULL HD .. and maybe that's the reason why it looks so ugly on most TVs..
but.. when the HDMI output is changed in the hidden menu (description here http://forum.xda-developers.com/showpost.php?p=23862818&postcount=5 ) the resolution was 720x480...
Gameboid - only showing the top row of pixels.
What a bummer... I want to play pokemon.
EDIT: Turns out its all GBA emulators. DroidEmu has the same issue.
Foxit Reader crashes when loading a PDF. Once a PDF file is selected it shows its processing for around 1-2 sec and then crashes.
Netflix
Looks like Netflix isn't working with the new ROM. I get the opening screen where I pick a movie but when it starts to play I just get a black screen. Maybe this is a DRM issue not sure but it sucks.
Kirby
Update netflix is working like a charm with this latest ROM.

[Q] is there a movie maker app like the one in the galaxy s2

ok so i took a video of my daughter and went to look for the movie maker/editor 0.0 its not there was on my galaxy s2 it let me ad audio to my movies but i cant do that now anyone know of a replacement app? not a video trimmer..
bump! i tried putting the gs2 video editor apk to my s3 also the one from the galaxy nexus but the nexus is slugish and freezes while the s2 just force closes.
this (beep) is annoying a simple video editor please... anyone? maybe someone knows how to get the s2 or n3xus movie makers to work on the s3.. im thinking its because of the quadcore processor tht they wont?
https://play.google.com/store/apps/details?id=com.techcatmobile.andromedia&hl=en
https://play.google.com/store/search?q=video+editor&c=apps
jje
JJEgan said:
https://play.google.com/store/apps/details?id=com.techcatmobile.andromedia&hl=en
https://play.google.com/store/search?q=video+editor&c=apps
jje
Click to expand...
Click to collapse
hi thanks iv already tried that, the problem with that is it force closes on me when i switch to the audio edit part and then try to go back to the video.. also it doest let you remove the sound from the origional video like the movie maker does in galaxy s2.
Just installed Andromedia Video Editor, but unistalled it straight away as it was picked up as a threat by TrustGo Security which advised that it could read your phone book, change your browser homepage and create shortcuts without your permission.
Have to say, I love the fact I can get free apps through the Play Store, but why do the app creators have to let themselves down by building crapware into the app? Stuff like that actually makes me want to pay,
there's video maker which is free in the Samsung more services app
Sent from my GT-I9300 using Tapatalk 2

android youtube app non HD as standard resolution possible?

Hello everyone,
I was wondering if it's possible to make google's official youtube app to play every video in Non-HD mode on my samsung galaxy tab 10.1 (origianal)? Samsung released a crappy ICS update so video playback is horribly laggy especially HD ones, so I want to watch youtube videos in non-HD, but I have to keep pressing the video window, then tap the 'HD' icon and it reloads the video....and it just takes too long.
my tab is rooted, so I am willing to install a modded app IF it's available, but is there any way to set non-HD resolution as default?
Thanks!

Samsung Galaxy Tab 3 Neo SM-T110

I need a tab just for watching video content. this tab is very old and doesn't support much and videos hangs a lot.
Is there a way to root and change the firmware totally and use some media OS(only for video consumption) from storage.
Kindly help out if pos. Thanks if u do.

Categories

Resources