ce file checksom error after country code update with dcs wm2003se. am I doing something wrong if I am changing to Qtek ??
I flash my V1605 with the exe file : RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test.exe and after reboot my devis was an Herm100.
Why ? it's probleme ? what can i do for reswitch in Herm200 ?
It's not a problem, unless you're really bothered about the digit being different.
How can i change this ?
ignore it, c'est pas probleme!
Hello guys,
I search an original Tim Rom (italian) for CID locked, example "RUU_Nike_HTCASIA_WWE_1.31.707.09_Radio_Nike_1.58.16.27_signed_Ship"
We want install original rom in Niki with this ID VENDER control.
I don't speak english fine, scuse me.
I will make a donation for this Rom.
Thanks to all
I have only a dumped Italien Tim Rom. You only need to start SSPL and flash it!
I think, in the moment no Original CID Locked Tim Rom avaliable!
dumped TIM IT Rom
not sure if it is cid locked - but worth trying.
( copied from netrunner - the austrian guy with horrible english knowhow )
nix für ungut netrunner ;-)
//edit on
ups, did not recognize netrunner is two minutes ahead of me .....
//edit off
My English is very poor :-/ i know -___-°
NetrunnerAT said:
I have only a dumped Italien Tim Rom. You only need to start SSPL and flash it!
I think, in the moment no Original CID Locked Tim Rom avaliable!
Click to expand...
Click to collapse
no, dumped Italien Tim Rom don't work (ID Vender not valid), we search Italian Tim Rom for CID locked, for Niki death
you must CID Unlock your Device first!!!
You can use USPL or HardSPL ... then flash it ... after you can write a Original SPL back!!!
NetrunnerAT said:
you must CID Unlock your Device first!!!
You can use USPL or HardSPL ... then flash it ... after you can write a Original SPL back!!!
Click to expand...
Click to collapse
I search Italian Rom for niki locked and dead (green red blue screen on start)
HardSPL don't start, it stop in 0% progress
Bye
Do this!
1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!!
NetrunnerAT said:
Do this!
1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!!
Click to expand...
Click to collapse
It show log
boot
Fill RSVD information for block 288 to 309
Storage start sector=0xAF00, total sector=0x103C0
Storage start block=721, total block=1039
Total Bad Block in CE: 0
Erase physical block from 1011 to 2032
si backup: Erase physical block from 2032 to 2048
Card inserted
SDHW_EnablePowerOn
SDHW_ConfigGPIO
Cmd5 CMD_TIMEOUT
Cmd8 CMD_TIMEOUT
SD Init OK
SDFATChkConf: RhOpenFile() failed NIKECONF.txt
OEMGetUpdateMode
OEMTranslateBaseAddress 23 80000000 80000000
IPLMSG:0x8:INFO: Loading image ...
IPLMSG:0x9:INFO: Jumping to image...
OEMLaunchImage 80000000
Jump to Physical Address 10300000
and still boot loader
how to fix it's
Thank' for reply
What have you done befor you get this?
sorry for this post can I make a new Thread
NetrunnerAT said:
Do this!
1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!!
Click to expand...
Click to collapse
Hello
I have connect MTTY e command "boot", then the device is restarted, but I have again blue red and green screen
help me, I search Rom Tim Italian for cid locked
Non funziona...
I still have the SPL-1.16.0000 on my screen how kan I jump it if my ROM on the device is damegt...
HELP please
installa una rom eng o wwe pe cid bloccati, ne trovi una infinità qui su xda. una volta installata la nuova rom segui la procedura di sblocco cid e installa questa:
http://rapidshare.com/files/154388012/Niki_TIM_WM6.rar.html
è la rom originale tim. la versione radio 1.58.16.27 originale. ciao.
ves.pa said:
installa una rom eng o wwe pe cid bloccati, ne trovi una infinità qui su xda. una volta installata la nuova rom segui la procedura di sblocco cid e installa questa:
http://rapidshare.com/files/154388012/Niki_TIM_WM6.rar.html
è la rom originale tim. la versione radio 1.58.16.27 originale. ciao.
Click to expand...
Click to collapse
Si ma io non ne trovo! E si che non sono uno cosi imbranato... Il file da te proposto è bloccato da password!!!
Mha...
I try to boot an English rom in my htc touch dual niki100 by following the steps posted by jockyw2001:
"Nike SSPL, USPL and HardSPL"
1. Download the attached files
2. REMOVE SIM and SD CARDS!!
3. Connect usb cable
4. Copy sspl-1.16-nike.exe to your device and run it (USB cable must be connected!)
5. After a few seconds "USB" appears on the display
6. Unplug and replug the USB cable
8. You can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
I did all but not step 8 and went on with the installation of the English rom but its stop at 15% and give me error. Since then the phone can’t pass the bootloader screen. I hard reset it but still can’t pass the bootloader screen. On the screen it shows,
NIKI100
SPL-1.16.0000
I was told to download MTTY, use command Boot, to force an OS Boot! I download one of 48.0kb in size. Can you please give me a step by step help on this software and to restore my phone back please!!
This was the information on it before trying to upgrade
N/S: HT809GC08365
Rom version: 1.31.166.11
Rom date: 11/22/07
Radio version: 1.58.20.21
Protocol Version: 25.65.30.04H
Model No: NIKI100
SPL-1.16.0000
CPLD-4
IMEI: 35661001354879301
You have to do step 8 otherwise it is not working, after finishing step 8 you can flash another rom.
Hi Experts
My Phone is Advantage X7500 .I Tried to change (upgrade) my rom version (AP 4.0 Platinum) cause it's speed is very Low.
In Bootloader is see this Information :
Athe400
IPL : v2.02
SPL : V3.65 Olinex
And This is The Device Information :
ROM Version : AP 4.0 Platinum
ROM Date : 11/09/07
Radio Version : 1.58.00.00
Protocol Version : 32.91.7020.20H
And The Identity Tab In Device Information :
Model No : ATHE100
Why In The Bootloader wrote ATHE400 And In Device Information ATHE100?
Now I Downloaded Michy 6.0 ROM (windows Mobile 6.1) with SPL 3.5 and Tryed to Install But After 1% The Error [244] : INVALID MODEL ID Shown What do I do ?
Please Help Me
These are The Pictures Of My Phone Details
Please Help
i have same problem
hi i have same problem . my x75oo is dead i try lot of rom it didnt work same bady help us
mansoor2fx said:
Hi Experts
My Phone is Advantage X7500 .I Tried to change (upgrade) my rom version (AP 4.0 Platinum) cause it's speed is very Low.
In Bootloader is see this Information :
Athe400
IPL : v2.02
SPL : V3.65 Olinex
And This is The Device Information :
ROM Version : AP 4.0 Platinum
ROM Date : 11/09/07
Radio Version : 1.58.00.00
Protocol Version : 32.91.7020.20H
And The Identity Tab In Device Information :
Model No : ATHE100
Why In The Bootloader wrote ATHE400 And In Device Information ATHE100?
Now I Downloaded Michy 6.0 ROM (windows Mobile 6.1) with SPL 3.5 and Tryed to Install But After 1% The Error [244] : INVALID MODEL ID Shown What do I do ?
Please Help Me
Click to expand...
Click to collapse
Athe400 is the id for the athena x7510 which is a different hardware
You could try cmonexs solution to access the phone via mtty to change it back to the correct ID.
I am assuming you were totally correct in saying you have an athena x7500 with the microdrive.Check against the photo in the wiki.