My HP touchpad isnt charging while its plugged up and the usb port on it seems to be loose and not reconized. before i would have to hold the cord up so it can charge, now its not even reconzing it. This happened before and HP sent me a new USB cord and that worked but now it started doing it again. The Question is should i just buy a new USB or send it in to get paired because the usb cords is becoming loose to fast. Also now that its completely dead i cant uninstall CM7 so should i send it in with CM7 still on it?
Try another cord first before giving HP a call, but it's most likely the port.
I would look in the port and make sure you didn't bend the connector in there. I did that once on my first MT4G
HP devices have had this issue before, but has alot to do with the HP power cord dongle itself. I've had several break on me already. Port is probably fine, and any other cord aside from HP doesn't work (tried a few Samsung and HTC cords to no avail).
Sent from my HTC Pyramid using Tapatalk
It's most likely the crappy USB cord. Mine did the same thing, but my Bionic's cable works just fine and is obviously thicker.
--
Sent from my CyanogenMod-powered TouchPad.
Related
So I was charging my phone and using it at the same time...and the charger doesnt stay in. its so loose....anyone else have this problem?
When my wife and I first got our Captivates her connection was really loose and would fall out. It turned out to be the plug itself, so maybe you can take it back to where you bought it from and ask for a new one.
This is my third Samsung android phone (captivate and nexus s), and it seems to be a common issue. I think its the cable though, as an HTC cable is nice and snug.
Sent from my ATT GS2
Have you tried plugging in another cable yet? Micro USB is a pretty common cable these days.
No problems with loose connections here.
In MicroUSB, the springs are moved from the device to the cable - so try another cable.
not sure if this justifies a topic of its own but i have kind of wrecked my hp charger cable by using it to charge my phone
i can only assume that the socket on my htc incredible S is tighter or something because the micro usb end wiggles around so much in my touchpad now it doesnt maintain a connection unless i apply pressure in a certain direction!
so just to let you all know, its probably best to keep your hp cable for your touchpad!
Why would you put it in your phone in the first place? They require different amount of power (tl;dr: you could have fried it).
Varemenos said:
Why would you put it in your phone in the first place? They require different amount of power (tl;dr: you could have fried it).
Click to expand...
Click to collapse
huh? the device only pulls as much as much power as it wants
and it only pulls 2amps when the touchpad detects the right amount of resistance
he is talking bout the cable and actually it might be the "teeth" on the micro usb being lower than it should, i basically have gone thru 4 cables because they wont stay in the right place not only because they are recessed (which i have pulled back into place but because there is a crack on the usb port..
darkassain said:
huh? the device only pulls as much as much power as it wants
and it only pulls 2amps when the touchpad detects the right amount of resistance
he is talking bout the cable and actually it might be the "teeth" on the micro usb being lower than it should, i basically have gone thru 4 cables because they wont stay in the right place not only because they are recessed (which i have pulled back into place but because there is a crack on the usb port..
Click to expand...
Click to collapse
I hate micro USB, such a flimsy design.
Basically some of the male ends are a micrometer thicker, causing the female end to stretch.
At least with TouchPad, you can get an inductive charger.
wonshikee said:
I hate micro USB, such a flimsy design.
Basically some of the male ends are a micrometer thicker, causing the female end to stretch.
At least with TouchPad, you can get an inductive charger.
Click to expand...
Click to collapse
cant argue with that totally agree with the touchstone, oh if the tp was able to pull 2 amps that way though..
Varemenos said:
Why would you put it in your phone in the first place? They require different amount of power (tl;dr: you could have fried it).
Click to expand...
Click to collapse
A switching mode power supply (pretty much all newer chargers) will put out its rated voltage as long as the current draw is equal to or less than its max spec. There is a slight variation between chargers output voltage but a few tenths of a volt won't do any damage.
I have charged all sorts of devices using the TP charger without issue. My Sansa Clip using a miniUSB cord, my Droid 3 using the HP cord. The microUSB plug is a standard so ports should be the same on all devices, but I really like miniUSB better. It seems like a more robust connection than micro which feels too small and flimsy.
My charger has a usb socket so I was able to swap out the micro usb charger - can you not do that?
Sent from my R800i using XDA App
oh yea, obv i can just change the cable, and quite cheaply, but was just letting people know that the slot on the touchpad must be quite big relative to other devices (though i can only vouch for my incredible S).
i'll have to buy a new cable now, though - no biggy
Sand down those spiked nibs that are supposed to hold the cable in place, they are too big to be needed and cause extra wear and tear on the units usb socket.
Taking them down to about 50% size and making them not so sharp gives the cable a good fit where it wont come out easy but its not like pulling teeth.
I learned this with my N900 lots of users did it, and now I noticed the touchpad had the same kind of fit and cable, so I consider this a necessity if you want to prolong the life of your device and minimize the possibility of something happening like what happened to the OP, atleast for him it was the cable that gave out and not the micro sub port on his TP.
my cable stopped working a while ago so im just using my samsung and htc cable,samsung cable is a real nice fit better than the TP one.
The supplied TP cable is just a flimsy POS. I've bought dollar store cables that were higher quality.
I use the TP charger and the cable that came with my phone to charge both devices. I've been doing it for months with no ill effects to the phone.
Sent from my LG-P925 using Tapatalk
Micro USB is a horrid and fragile setup to begin with.
Sent from my SGH-T989 using XDA App
yup my usb cable doesnt work anymore. I accidentally tripped over it lol
LOL good thing i bought 3 HP touchpad chargers over the weekend.
I actually lost the stock one.. so i 'stocked' up... just in case
Just FYI, the default AC adapter that comes with the TP has two parts.
The front part rotates to separate it from the base, if it's rotated a bit - it won't charge, so double check that the front (where the prongs are) are tightened properly.
Mine's developed the same fault using it on my Galaxy S2, it's now loose on all devices and I had to throw it away. I just think the quality's poor.
The HP cable for my TP stopped charging the device too, got in touch with support and a day later I received a shiny new replacement cable which *isn't* loose
Sent from my GT-I9100 using xda premium
my usb cable stopped working too (yesterday).
Well, it works but i need to hold the cable in a particular way or it stops.
Did any of you buy a replacement? if ya which one.
Hmmm, I got the touchstone and haven't used the USB since, unless plugging in to the computer to move an update.zip over. Still tight fit, and with rom I'm running touchstone seems to charge the same as the actual charger that came with touchpad.
It is actually a fact that the stock USB cables are of poor quality. So ultimately its not your fault if it goes bad. Just use another micro USB cable (even cheap ones you find at the convenience stores works great) to charge your touchpad. I've been using my micro USB which came with my phone to charge my touchpad and I must say its a perfect fit for the touchpad.
Hi All,
I ended up purchasing the Rezond based on the previous feedback, but I'm still in the test-drive phase. I'm really enjoying the phone so far and so far I'm thinking "keep". The included headphones are really great also compared to my previous headphones! I'll be waiting at least another week before I decide to keep the phone and decide to put a better ROM on the phone.
Anyway, what's the deal with the charge cable? Standard Micro-USB fits fine, but what's up with the funky cable that came with the device? Will this cause any problems using a longer standard cable or will it cause the phone to charge slower? Does this cable need to be used for proper connection to a PC?
Custom cables always make me leery.
Sorry if this has been asked, searching for custom usb, charge cable, custom cable did not return an results.
Its actually not a custom cable. It is a MHL adapter. Lots of talk about it in the Accessories forum.
Basically one port for charging and HDMI out instead of two separate ports.
You can charge fine with a regular micro usb cable, I don't think it's slower but I've never timed it.
If you want to get more like the ones that came with the phone you can get the HTC Flyer cables in white here:
http://www.expansys-usa.com/htc-flyer-data-cable-dc-t500-extmicro-usb-12pin-white-209995/
I bought two of them since I like the secure feeling of the snap in.
I've never tried using a regular micro usb for data and don't have one within arm's reach and I'm really super comfy right now so I'm not going to get up but I don't see why it wouldn't work.
In the accessories forum try searching "mhl cable" and I think you'll come up with two threads about it if you want further info.
I am using a blackberry (micro USB) cable at work, and the OEM cable at home, I see no different in charge time or PC connectivity between the 2 cable.
I also use a blackberry AC adapter to charge the rezound when I am in a pinch.
HTH.
Thanks.
I figured any standard micro-usb cable will work. A MHL cable makes sense though, I've just never actually seen one and I'm not familiar with the form factor.
I'll be looking into this, thank you again.
"MHL" A Lot More Solid
The MHL cable feels a lot more solid than a micro USB. I have a couple micro usb that have gotten loose, and now just fall out of the phone if turned over, or if I hit a bump in the car. Thanks for finding a source to buy more of the MHL cables.
Also here slightly less expensive.
http://www.amazon.com/HTC-Flyer-Data-Sync-Cable/dp/B004VF616C/ref=sr_1_2?s=electronics
krelvinaz said:
Also here slightly less expensive.
http://www.amazon.com/HTC-Flyer-Data-Sync-Cable/dp/B004VF616C/ref=sr_1_2?s=electronics
Click to expand...
Click to collapse
How long are those cables? Doesn't say on the page; unless I'm blind.
There is no such thing as an "MHL cable".
The format of the port and cable that come with the Rezound is called "EXTMicro USB".
"MHL" refers to a standard for connecting small electronics to HDTVs. It works with a regular Micro USB cable. Last time I checked (a couple of weeks ago) there are no MHL adapters that utilize EXTMicro USB connectors. Most of the ones that I've found use a regular Micro USB connector.
At this time, it's unclear exactly what the extra 7 pins in the connector in this phone are for. Other HTC phones have used them for analog audio and video output, but this doesn't appear to be supported by the rezound.
If you look at your rezound, you will see it only has the 5 pins. It does utilize the ExtMicro USB plug end/shape. If it truly had the ExtMico USB then while using the mhl adapter it could charge your phone via A/C while streaming. But it can't because the data pins are being used/ there are only 5 pins.
Sent from my ADR6425LVW using xda premium
That's an excellent point about charging while using an MHL adapter. One could still force fast charging through software, such as what's available in Incredikernel/control, though.
On my rezound, I most definitely have contacts in the extra spots. The cable my phone came with, however, doesn't have any pins for them to contact.
Prefader said:
That's an excellent point about charging while using an MHL adapter. One could still force fast charging through software, such as what's available in Incredikernel/control, though.
On my rezound, I most definitely have contacts in the extra spots. The cable my phone came with, however, doesn't have any pins for them to contact.
Click to expand...
Click to collapse
You are right the phone has it, the does not cable. That is my mistake. I knew one of them didn't just was too lazy to check.
Sent from my ADR6425LVW using xda premium
I took a mini USB cable and plugged it into my Amaze. It's the regular USB, not the Amaze USB, so it kinda wiggles around in the port. Then when I held up my Amaze with the USB in, it kept going on and off with the charging aspect of it. Anyone know?
Well...if it wiggles like you stated then that's your problem ya know. You lose the amaze cable?
Sent from my HTC_Amaze_4G using xda premium
I've got a mini usb cable that will do the same thing. Its because even though it will work, they can get loose enough that they won't make 100% contact. I've found that if you pinch the top part of the cable down a bit it'll grip onto the contacts better, but if you've got an HTC cable for your phone you're better off using it. The micro usb cables hold onto the contacts only, not the frame of the port like it should, while the HTC cable fits securely in the port and you run zero chance of anything breaking off.
I am having chatting issues. This just started happening when I woke up this morning. I forget if the micro USB is supposed to click when you plug it in the phone to start to charge. When I plug my phone in, I don't get any indication that the cable is locked in. Also if I move the cable ever so slightly. The phone will stop chatging. The USB cable feels like its gonna come out if I move the phone in any way.
I don't have any spare micro USB cable so I wanted to know if you guys are think this is a hardwarw problem or possibly if just the cable is messed up. Im hoping its the latter because I am not trying to replace my phone.
Also have any of you guys had this problem? Thanks
This isn't a question and answer forum.
Could be the cable. Different cables fit in differently. I personally use my kindle fire hd cable cuz it clicks in snugly with my htc charger.
Sent from my HTC One using xda premium