Are there any battery percentage apps or zip files I can flash with a rooted rezound?
Anything out there?
Sent from my ADR6425LVW using XDA App
1967ls2 said:
Are there any battery percentage apps or zip files I can flash with a rooted rezound?
Click to expand...
Click to collapse
Not sure what you mean. If you want to change your battery icon, there are plenty of themes out there but I'd imagine most just use UOT kitchen.
I would like to get rid of the dummy battery icon and replace it with one that shows the battery percentage left instead. where can I find one?
Sent from my ADR6425LVW using XDA App
1967ls2 said:
I would like to get rid of the dummy battery icon and replace it with one that shows the battery percentage left instead. where can I find one?
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Yeah, check out the kitchen. http://uot.dakra.lt/kitchen/
You will need to supply your /system/framework/framework-res.apk, /system/framework/com.htc.framework.apk, and /system/app/systemUI.apk in order to build it out right but it works like a charm.
I modified the framework-res.apk of the stock rooted ROM http://forum.xda-developers.com/showthread.php?t=1416604 to add circle battery. i don't know how to create a flashable zip for it but you can just do what i did and push the framework-res.apk in recovery after mounting system. as always do a nandroid backup first just in case. this will probably only work with the ROM linked. the attached zip is not a valid flashable zip. you need to extract the apk and push it with adb
Try this one out
I also prefer just a simple battery percentage icon in the notification bar, and have been using UOT to generate these with pretty much every ROM I have flashed. It's the "Digital Battery" icon which I prefer so I don't have to don reading glasses just to check the battery status.
I just used the UOT to cook this up which runs on the stock Rezound ROM. Flash it in recovery. Should work fine.
Here's a screen cap of what it looks like.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some suggest wiping cache and dalvik before flashing the UOT mod. I only flashed cache and everything seems to be fine. YMMV.
Thank you guys for the responses! I'm unfamiliar with uot kitchen or whatever it is called. can any of you provide any step by step directions on how to get either of these loaded on my phone? Thanks in advance.
Sent from my ADR6425LVW using XDA App
1967ls2 said:
Thank you guys for the responses! I'm unfamiliar with uot kitchen or whatever it is called. can any of you provide any step by step directions on how to get either of these loaded on my phone? Thanks in advance.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
I am assuming you have unlocked your bootloader, rooted your phone and you have installed a recovery (there are only two right now for the Rezound). I prefer RA Vigor. If you aren't rooted (and temproot doesn't count), you can't modify the phone.
1. Copy the zip file from the above-captioned link to the root of your SD card (remember, that's sdcard2 on the Rezound. Sdcard is actually "internal" memory).
2. Reboot into recovery. Wipe your cache partition. (Some recommend wiping dalvik cache as well but I didn't). In RA that's: Wipe --> Cache
3. Go into the Flash menu of your recovery, navigate to the zip file and select that for flashing.
After you reboot you should see the mod.
If you don't like that particular version, just go to the UOT kitchen and follow the instructions there. I'm hosting a zip file (not flashable, just compressed for downloading) of the 3 files the UOT will ask you to upload here, assuming you're running the stock Rezound ROM.
Nice! Thank you for the walk through. I tried to make one in the kitchen but it asks for files to upload but when I try to supply them it says no files found and won't let me generate file I'm trying to make. If I download the files you supplied where should I put them so I can make my own battery theme?
Sent from my ADR6425LVW using XDA App
1967ls2 said:
Nice! Thank you for the walk through. I tried to make one in the kitchen but it asks for files to upload but when I try to supply them it says no files found and won't let me generate file I'm trying to make. If I download the files you supplied where should I put them so I can make my own battery theme?
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
The files are com.htc.resources.apk, systemui.apk, and framework-res.apk, all of which are already in the stock ROM. You don't need to put them anywhere on your Rezound, they're already there as part of the ROM. You need to put them on your PC/Mac from which you will upload them to the UOT Kitchen in the next to last step (on the right side of the page, where it says to upload files.) You can't use the Kitchen's "list" of ROMs because the Rezound stock ROM isn't in the list.
I simply pulled them from the stock ROM and posted them so you wouldn't have to go searching for them on your phone.
Ahhh that explains it. I was trying to make the zip file from my phone. I will do it on the PC with the files you provided. Thanks again for all your help. I flashed the zip already provided earlier in the thread and it worked perfectly but I would prefer a different style. I will make it from my PC. Thank you again!
Sent from my ADR6425LVW using XDA App
Worked great!
I used Root Explorer and made a folder on my sd card "UOT". Then I copied the 3 files into that folder. LOL! Nevermind, I used my PC to upload the files. DUH!
It did work well though. When you donate to the Kitchen, 1 Euro = $1.33 US.
I liked it so much, I donated.
My music player tried to revert back to some online library and said I needed Wifi to connect. I had to change it to my library on my SD card and it worked flawlessly.
You don't need a kitchen to add battery percent. Any framework can be modded. You can also 100 battery charge images.
You just need apktool to decompile, add the modded xmls and images and recompile
Sent from my PG86100 using xda premium
fernando sor said:
You don't need a kitchen to add battery percent. Any framework can be modded. You can also 100 battery charge images.
You just need apktool to decompile, add the modded xmls and images and recompile
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Try to keep in mind that plenty of people don't/can't/won't do this manually. I'm one of the people that know how to do it manually and wouldn't if I could help it. UOT Kitchen provides a valuable resource to people that don't want to create 100+ png files.
Thanks for apktool though. I've been looking for something to decompile the APK's so I can take a look at tetheringguard.
Quick question..still new to this UOT deal..should all settings be left to default as they are on the File Upload section? I've extracted the files needed but the build always generates an error..I'm running Ineffabilis-v1.0-signed currently..will it work with that ROM or is it stock only?
NVM...i used the extracted systemUI.apk com.htc.resources.apk and framework-res.apk from the stock rom and it went thru just fine. Flashed it over still running Ineffabilis v1.0 and it works so far..pretty kewl
Im thinkin bout making gettin that rpm gauge battery icon
I never realized UOT was even out there....lots of cool possibilities
Sent from my ADR6425LVW using XDA App
There if this one from rezrom
http://forum.xda-developers.com/showpost.php?p=21308015&postcount=245
Sent from my ADR6425LVW using XDA App
is there anyway to achieve this without rooting the phone?
Related
Hello Guys
I have designed a glow circle battery for my own use, but I decided to post it here so you may use it in case you like it
The battery was developed on a i9000, but I analyzed the framework from captivate and it seems that this procedure will work on captivate also. Please try and feedback.
If you like my work, please consider a small donation to help me continue developing.
Change log:
17.03.2011
-Reorganized the threat so everyone could easily mod his own framework. Follow the new installation instructions
-Added CWM file only with script so you can use it with your framework file safely.
-Uploaded new reorganized image packages.
14.03.2011
-added new charger images. -- Beams -- ( i might rework them in the next days) --
-added missing images for full charge and so on...
-I will modify tomorrow morning the threat, with new reorganised files cause it became a little confusing
03.02.2011
CAUTION:
Flash only if you have DOC's ROm, because some users stated that on Darky they had problems. Not sure why, because it should work - they're both deodexed roms. Do a BACKUP
-Added CWM files for V1, V2 - with percentage and clear at charging
-Working to a new animation for charging, a lot better than this one, but I can;t tell you when it will be ready because I have a lot to work for my school
02.02.2011
Finished creating charging icons and XML editing for animation. I Added two versions of the framework:
-Version 1 : loops the circle animation continuous, without showing the current amount of battery after each loop
-Version 2 : Shows after each loop the amount of battery
01.03.2011
I just created another battery with life indicators on the margins
INSTALLING INSTRUCTIONS
1. Download 3 packs: one with images of the battery (batt1 or batt2), one of the chargers (Glow, or BEAMS) and one of the charging animation images (with percentage and without).
2. Download CWM_update.zip
3. Place the files from the battery pack and charger inside your framework-res.apk file, in /res/drawable-hdpi.
4. Place the file from charging script inside your framework-res.apk file, in /res/drawable
5. put the modified framework-res.apk file inside the framework folder, of the CWM_update.zip.
6. Reboot in CWM.
7. Clear cache.
8. Clear Dalvik.
9. Flash the file.
10 Reboot and enjoy
Previews:
New Evolution Battery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Glow Charger
Old Evolution
Beam Charger
DOWNLOAD
If you like my work, please consider a small donation to help me continue developing.
Battery:
New Evolution: http://www.multiupload.com/371JXMVJ7N
Old Evolution: http://www.multiupload.com/S64AEV6X7K
Charger
BEAM Charger: http://www.multiupload.com/72IYDH6F03
Glow Charger: http://www.multiupload.com/P16AHXNW2S
Charging Script:
With percentage: http://www.multiupload.com/98L6VG1IQF
Without percentage: http://www.multiupload.com/ZCMQ2MPBTC
CWM_update.zip: http://www.multiupload.com/OPI3LQ1Z04
how do I place the files in the framework file??? I really would like to give it a try but i don't know how, the instructions are little confusing. And another question this mod work on axura 2.3.0.1?
marianohernan said:
how do I place the files in the framework file??? I really would like to give it a try but i don't know how, the instructions are little confusing. And another question this mod work on axura 2.3.0.1?
Click to expand...
Click to collapse
use root explorer to do it
bosina said:
use root explorer to do it
Click to expand...
Click to collapse
wrong. using that you will need to reflash as you will keep getting FC errors on every app.
What have you not understood?
WHOA WHOA WHOA.
What rom is this?
that looks jizzingly beautiful!
I don't even understand these instructions:
1. Download 3 packs: one with images of the battery (batt1 or batt2), one of the chargers (Glow, or BEAMS) and one of the charging animation images (with percentage and without).
2. Download CWM_update.zip
3. Place the files from the battery pack and charger inside your framework-res.apk file, in /res/drawable-hdpi.
4. Place the file from charging script inside your framework-res.apk file, in /res/drawable
5. put the modified framework-res.apk file inside the framework folder, of the CWM_update.zip.
6. Reboot in CWM.
7. Clear cache.
8. Clear Dalvik.
9. Flash the file.
10 Reboot and enjoy
What is all this framework stuff? Just make it so this whole thing is flashable thru CWM... sheesh what is all this crap
jwleonhart said:
I don't even understand these instructions:
What is all this framework stuff? Just make it so this whole thing is flashable thru CWM... sheesh what is all this crap
Click to expand...
Click to collapse
the batteries are organized in image packs, so you can form different combinations. the packs are available in the download links, and the CWM_update is the file that will help you update your systems framework without breaking your system. sorry, but if you don't have some basic knowledge about this I don't recommend to do any modification, as you might brick your phone.
I think the instructions are clear enough... I can't explain better than that
xriderx66 said:
WHOA WHOA WHOA.
What rom is this?
that looks jizzingly beautiful!
Click to expand...
Click to collapse
thats what i thought when i saw it..damm
I have some experience but i'm by no means advanced. I also don't have DOC's rom, whatever rom that is. I'm using Bionix 1.3.1, can I still flash this battery file?
Let me go step by step on this so maybe i'll understand what your saying with ease...
1. Download 3 packs: one with images of the battery (batt1 or batt2), one of the chargers (Glow, or BEAMS) and one of the charging animation images (with percentage and without).
2. Download CWM_update.zip
3. Place the files from the battery pack and charger inside your framework-res.apk file, in /res/drawable-hdpi.
4. Place the file from charging script inside your framework-res.apk file, in /res/drawable
5. put the modified framework-res.apk file inside the framework folder, of the CWM_update.zip.
6. Reboot in CWM.
7. Clear cache.
8. Clear Dalvik.
9. Flash the file.
10 Reboot and enjoy
Ok, so I downloaded the 3 files... Glow Charger, New Evolution battery, and Charging with %. Then I downloaded CWM_update.zip
Now I went ahead and unrar'ed the 3 zip files, which are obviously full of images.
Now the next 3 steps are what confuse the living hell out of me:
3. Place the files from the battery pack and charger inside your framework-res.apk file, in /res/drawable-hdpi.
4. Place the file from charging script inside your framework-res.apk file, in /res/drawable
5. put the modified framework-res.apk file inside the framework folder, of the CWM_update.zip.
What exactly are you telling me to do here?
I'm not the most advanced, but i'm also not challenged so if you could just break it down a little bit more maybe i'd understand it better.
Sorry I didn't mean to come off like a prick in the last post, i really would like to try these battery mods out, they look nifty.
And also i'm with these guys, what theme/rom are you running... looks like everything on your phone is transparent?
Looks pretty awesome! I'm content with my current battery, but this is quite cool....
If you don't mind though, what font is that? It looks awesome!
Crysis21 said:
no man, not that;s what i mean. the battery, the charger, and the XML for making the animation are put in separate packages. all these packages must be combined, at your preference, in your framework-res.apk file. (you open the framework-res.apk with WINRAR and then you put the images in the folder drawable-res-hdpi and the xml in drawable. TAKE CARE to save the file with no compression!!! after that, put the file in CWM_updater, in framework folder. THIS FILE (cwm_updater) you will flash with CWM. Got it?
Click to expand...
Click to collapse
this is what i explained on captivate forum. I hope is clear enough
Ok, so I tried to follow your guide.
Using QtADB I went ahead and found the framework-res.apk file. I then copied it to my PC and unrar'ed it. Then I went to drawable-hdpi (I didn't have a drawable-res-hdpi.... but I found the images in drawable-hdpi so I replaced them there)
I then went ahead and make the file and APK again through winrar. Made sure I didn't compress it.
I then went and opened the CWM_Update.zip folder, went into the the framework folder, and copied the framework-res.apk inside of it.
I then copied the CWM_Update.zip to my SD card, went into CWM and tried to install it. When I try to install the zip I get the following:
E:Can't open /sdcard/romstuff/CWM_Update_evolution_battery.zip
(bad)
Installation Aborted
I renamed CWM_Update the CWM_Update_Evolution_battery so I knew what the file was for since I have alot of stuff in my rom folder.
I'm assuming changing the name shouldn't do anything since anything else i've ever renamed is fine.
I'm running Bionix 1.3.1, could that have something to do with it???
This really sucks I wanted to try the battery, and i'm really sure I did this right... i'm not an idiot with a computer so I'm lost on where I went wrong possibly?
I just found your post in the captivate forum, and also checked that I used "STORE" on winrar for both repacking the .apk file and for the .zip file. The whole update.zip file ended up being a little more than 11mb... does that sound right? The APK file itself is 6.6mb in size.
It's still giving me the (bad) file error in CWM.
I have followed each step, copied the files to the apk, put the apk into the CWM_update zip and flashed with clockwork. For some reason it is not working/showing up. Still has the default battery icons and animations. I am running Axura 2.3.1.3. No problems with Clockwork flashing, no error or stuck on boot animations. Don't know what else to do. Really like this battery mod.
Do you have to delete the original Battery png's and charging icons from the Framework folder to make this work? I also am trying to follow your instructions and trying to make sense of it.
jwleonhart said:
Ok, so I tried to follow your guide.
Using QtADB I went ahead and found the framework-res.apk file. I then copied it to my PC and unrar'ed it. Then I went to drawable-hdpi (I didn't have a drawable-res-hdpi.... but I found the images in drawable-hdpi so I replaced them there)
I then went ahead and make the file and APK again through winrar. Made sure I didn't compress it.
I then went and opened the CWM_Update.zip folder, went into the the framework folder, and copied the framework-res.apk inside of it.
I then copied the CWM_Update.zip to my SD card, went into CWM and tried to install it. When I try to install the zip I get the following:
E:Can't open /sdcard/romstuff/CWM_Update_evolution_battery.zip
(bad)
Installation Aborted
I renamed CWM_Update the CWM_Update_Evolution_battery so I knew what the file was for since I have alot of stuff in my rom folder.
I'm assuming changing the name shouldn't do anything since anything else i've ever renamed is fine.
I'm running Bionix 1.3.1, could that have something to do with it???
This really sucks I wanted to try the battery, and i'm really sure I did this right... i'm not an idiot with a computer so I'm lost on where I went wrong possibly?
Click to expand...
Click to collapse
ughh, just did all the same as these guys^^ and got nowhereeeee. when someone fixes this i'll try again..
How do I make the Clock Background Transparent. Id really like to learn how to do some of this.. High level steps would be sufficient. Thanks
This is what I'm wanting rid of.
Id also like to know how to change the Font Color If possible as well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Thuderbolt using XDA Premium App
I have a bunch of clocks without the background and different digit font and colors on my thread. Flip and non flip... and I take requests also. I don't have the link Cuz I'm on my phone, but just do a search for stoney 666 or bad seed customs here in the apps and themes forum. Or the clock link on my sig. Different thread but same clocks.
Stoney 666 said:
I have a bunch of clocks without the background and different digit font and colors on my thread. Flip and non flip... and I take requests also. I don't have the link Cuz I'm on my phone, but just do a search for stoney 666 or bad seed customs here in the apps and themes forum. Or the clock link on my sig. Different thread but same clocks.
Click to expand...
Click to collapse
So i found one i liked and installed it.. But now nothing works.. None of the HTC Widgets will Work. and I cannot Long Press on the screen to put widgets on the screen.
And When I use the menu and goto personalize and browse for htc widgets rosie force closes.
Im trying to install the StockWhite .. I thought I had a 4x5 Setup. But Im going ahead an trying the non 4x5 to see if that fixes it.
You just need to change one image in drawable-hdpi its the first image if your looking at it in alphabetical order. Either use to program to make it transparent or find a clock that already has a transparent background and just copy that in to the apk then push it back to your phone.
Sent from my ADR6400L using XDA App
sammyboy405 said:
So i found one i liked and installed it.. But now nothing works.. None of the HTC Widgets will Work. and I cannot Long Press on the screen to put widgets on the screen.
And When I use the menu and goto personalize and browse for htc widgets rosie force closes.
Im trying to install the StockWhite .. I thought I had a 4x5 Setup. But Im going ahead an trying the non 4x5 to see if that fixes it.
Click to expand...
Click to collapse
The older clock widgets don't work properly on the new framework found on the ThunderBolt, which is why I haven't made all of my clocks available by saying they were compatible yet.
What you want to do is take a look at the htcclockwidget.apk using 7zip.
You can download my restore for Tbolt in my themes thread here in the Tbolt section.
Download it twice. Use one as your main backup, and one as your mod test.
The one we are going to use as your mod test, we are going to open up using 7zip, open the .zip until you get to system/app/ the apk is in this folder. Open the .apk in 7zip and this is the graphic we want to replace, "clock_add_weather_base.png" it will be located in this location: (see attachment)
All you gotta do is either right click and do "open outside" do what you want with the graphic or just replace it with a opacity of ZERO and the background will be gone.
To make it easier, I have included the transparent graphic. Just drag and drop into the same window shown in the attachment photo, and 7zip will ask to update, click yes. click all the way back until your out of the .zip. and then your done, use the .zip to install via clockworkmod recovery and boom, its gone!
Your welcome
P.S. Here's a .zip update instead if all that is too complicated.
Just copy this to the SD card, reboot into recovery, mount your system first, and do install from sd card. and then once its done, reboot.
NCX Designs said:
The older clock widgets don't work properly on the new framework found on the ThunderBolt, which is why I haven't made all of my clocks available by saying they were compatible yet.
What you want to do is take a look at the htcclockwidget.apk using 7zip.
You can download my restore for Tbolt in my themes thread here in the Tbolt section.
Download it twice. Use one as your main backup, and one as your mod test.
The one we are going to use as your mod test, we are going to open up using 7zip, open the .zip until you get to system/app/ the apk is in this folder. Open the .apk in 7zip and this is the graphic we want to replace, "clock_add_weather_base.png" it will be located in this location: (see attachment)
All you gotta do is either right click and do "open outside" do what you want with the graphic or just replace it with a opacity of ZERO and the background will be gone.
To make it easier, I have included the transparent graphic. Just drag and drop into the same window shown in the attachment photo, and 7zip will ask to update, click yes. click all the way back until your out of the .zip. and then your done, use the .zip to install via clockworkmod recovery and boom, its gone!
Your welcome
P.S. Here's a .zip update instead if all that is too complicated.
Just copy this to the SD card, reboot into recovery, mount your system first, and do install from sd card. and then once its done, reboot.
Click to expand...
Click to collapse
That is EXACTLY what I needed. Thanks a ton
sammyboy405 said:
That is EXACTLY what I needed. Thanks a ton
Click to expand...
Click to collapse
Quite welcome
NCX Designs said:
Quite welcome
Click to expand...
Click to collapse
OK so Now I have a few questions lol
So I made some changes and such as described above. And Installed the Zip via clockwork.. says it installed
But I still have the same clock? so I deleted it and put it back and its still there with none of the changes. Not even the change you put in for the transparent background.
what Did I do wrong?
** Oh and I also tried it with no changes at all just the zip you provided incase i did something wrong.. and it still doesn't show?
----
Opps I Figured it out.. i wasnt Mounting the /system before installing Works great now haha My bad.
OK here is my home screen. My next question is how do I change the font color on the clock widget. And is it possible to make the weather smaller?
Sent from my Thunderbolt using XDA Premium App
decompiling... done
OK So Ive learned how to use apktool
Done.. got it all de-compiled..
But now what do I edit to do what im wanting. there are so many xml file.. guess its just a hunt to find? and trial and error to know whats what?
How do you make the clocks white background with the numbers transparent? I would just like to have a white outline and text for the flip clock?
I tried the zip a couple times on BAMF 1.4 and BAMF demix and it doesn't change my clock, no transparent clock... I dunno why.
sent from my BAMFbolt
BurnOne77 said:
I tried the zip a couple times on BAMF 1.4 and BAMF demix and it doesn't change my clock, no transparent clock... I dunno why.
sent from my BAMFbolt
Click to expand...
Click to collapse
Dont forget once your in CWR to goto Advanced, and Mount your /system before you install the zip else it wont work. I ran into the same issue and wasn't paying attention.
Just try matted blues apk. It's standard in that
Sent from my thunderbolt
sammyboy405 said:
Dont forget once your in CWR to goto Advanced, and Mount your /system before you install the zip else it wont work. I ran into the same issue and wasn't paying attention.
Click to expand...
Click to collapse
right on, works better when you do it that way.
thanks to you
Hey Guys,
This mod will remove the time from the notification bar on your Atrix. You will need to install the Java SE JDK in order to perform this mod.
You Must Be Deodexed to Perform this Mod!
Instructions:
1) First download smali-1.2.6.jar and baksmali-1.2.6.jar from here http://code.google.com/p/smali/downloads/list. Rename them to just smali.jar and baksmali.jar.
2) You'll need to pull the services.jar from the /system/framework/ directory on your phone to your PC. Open the services.jar file for example with winzip, 7z, winRar, or whatever. Unzip the classes.dex file to a new folder and place the baksmali and smali file there too. After that open a new command window within that folder and run following line:
Code:
java -jar baksmali.jar -o out/ classes.dex
3) You'll have a new folder now called "out". Browse to "out/com/android/server/status" and open the file called StatusBarPolicy.smali with a text editor. I personally prefer "Notepad++".
4) Search for:
Code:
invoke-direct {p0}, Lcom/android/server/status/StatusBarPolicy;->updateClock()V
5) It should be under ".line 592". Now add this line underneath the line you just searched for from above:
Code:
invoke-virtual {p2, v3, v6}, Lcom/android/server/status/StatusBarService;->setIconVisibility(Landroid/os/IBinder;Z)V
6) Save the file.
7) Open a new command window within the folder you created before or maximize the same command window you used before and run this:
Code:
java -Xmx512M -jar smali.jar out/ -o edited-classes.dex
8) Now you'll have a new dex file called "edited-classes.dex". Rename the old dex file to classes_old.dex and rename the new file to "classes.dex".
9) Open again the services.jar file with any zip tool and overwrite the classes.dex file with the one just created.
10) Push the updated services.jar back to the /system/framework/ directory on your phone and set the file permissions to rw-r--r--. Reboot!
That's it! Now you have more room for icons...
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
If you choose to perform this mod, please be aware that you are doing it at your own risk. I'm not responsible if you brick your device. Backup, Backup, BACKUP your files before performing this mod.
Good Luck!
If anyone knows how to remove the date from the notification dropdown, please let me know, that's the next mod i would like to perform...Thanks!
FINALLY! Been looking for someone to do this. havent tried it yet, backing up right now..
**EDIT** lol nevermind, cant figure this out on my mac and my pc isnt running correctly atm. Anyway to make this flashable through cwm for noobs like me?
Sweet look
any way to make this an update.zip? sry new to this and am not really comfortable with this
tonecreationz said:
That's it! Now you have more room for icons...
Good Luck!
Click to expand...
Click to collapse
Hey Tone... thought I would post it here.. just in case people don't want or don't know how to do this.. I created the CWM install version for them... credit goes to you for the MOD...
I also attached a 1% services.jar from Gingerblur v3.5 with the no clock mod... I don't use the 1% MOD... but you can give it a try...
jpinoy said:
Hey Tone... thought I would post it here.. just in case people don't want or don't know how to do this.. I created the CWM install version for them... credit goes to you for the MOD...
Click to expand...
Click to collapse
Thanks... worked on top of Gingerblur v3.5.
**Edit**
Huummm, battery level seems to be stuck @ 100% now... let me try erasing battery data via CWM
Well, I don't know??? Wiped battery status and dalvik cache with CWM and battery status still shows 100%... Going to restore to the backup I made before flashing this, and confirm that this was indeed the problem.
jpinoy said:
Hey Tone... thought I would post it here.. just in case people don't want or don't know how to do this.. I created the CWM install version for them... credit goes to you for the MOD...
Click to expand...
Click to collapse
is this only for 1.83? Im about to try it on top of 1.57. Of course im backing up first..
*EDIT* not sure if there would be any reason for it to not work on 1.57, but it works fine [:
Swiftks said:
Thanks... worked on top of Gingerblur v3.5.
**Edit**
Huummm, battery level seems to be stuck @ 100% now... let me try erasing battery data via CWM
Well, I don't know??? Wiped battery status and dalvik cache with CWM and battery status still shows 100%... Going to restore to the backup I made before flashing this, and confirm that this was indeed the problem.
Click to expand...
Click to collapse
Hmm.. this is just for the default status bar.. this might not work with the 1% battery mod that also requires the services.jar editing.... let me see if I can edit that and you can give that a try...
jpinoy said:
Hmm.. this is just for the default status bar.. this might not work with the 1% battery mod that also requires the services.jar editing.... let me see if I can edit that and you can give that a try...
Click to expand...
Click to collapse
Think I got it... just edited my services.jar from gingerblur v3.5... going to flash and test. If it works, I'll post it.
Should probably note for windows users that "text editor" doesn't mean notepad It'll prolly screw up the line endings and cause problems.
Thanks for the guide though! Good work
This worked great and thanks for the zip file above thumbs up guys
sent from my gingerblur 3.1 atrix
jpinoy said:
Hey Tone... thought I would post it here.. just in case people don't want or don't know how to do this.. I created the CWM install version for them... credit goes to you for the MOD...
I also attached a 1% services.jar from Gingerblur v3.5 with the no clock mod... I don't use the 1% MOD... but you can give it a try...
Click to expand...
Click to collapse
so all i have to do is use one of this zip files?
jahizen said:
so all i have to do is use one of this zip files?
Click to expand...
Click to collapse
Correct.....
Will this work on a stock rooted Atrix?
Sent from my MB860 using Tapatalk
asesino said:
Will this work on a stock rooted Atrix?
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
You can give it a try, just use the stock one and not the 1% one.
Make sure you make a backup of your stock setup in CWM first before doing this just in case it doesn't work...
Oh, btw, you got a thanks from me cus I hit the wrong button when trying to reply to your question..
Can someone please edit the services.jar for greyblur so theres no clock in the notification bar? AND IF possible, can you add the 1% battery mod? TIA
ekidd14 said:
Can someone please edit the services.jar for greyblur so theres no clock in the notification bar? AND IF possible, can you add the 1% battery mod? TIA
Click to expand...
Click to collapse
Make a backup and then try it... I moved away from Greyblur a while ago and don't want to flash that on my device to see if it works, it should though... but I've only tested these on 1.83...
Good luck
jpinoy said:
Make a backup and then try it... I moved away from Greyblur a while ago and don't want to flash that on my device to see if it works, it should though... but I've only tested these on 1.83...
Good luck
Click to expand...
Click to collapse
Yeah, i flashed it a while ago while on greyblur and everything works fine, except the notification pulldown isnt transparent like how greyblurs pull down normally is. The .zip posted is from gingerblur's services.jar i think..
Is it possible to remove Time from Micromax A57's statusbar
Any how I was trying to do this
with my A57 Micromax, but codes and files do not match
If you can help please get me an idea on where i should find and replace the code to remove the time here.
I am attaching the services.jar for this device
Standing battery without much headache by editing Horizontal icons
Well may not be new but PNGs are always doubtful how they behave...
What I wanted is Standing style battery and I was have very nice battery icons set that was in horizontal style.
I simply opened all of them in a picture manager and Rotated then Clockwise. Done..
and Its working fine with the statusbar and looks good without any loss of png quality.
I liked it..
---------- Post added at 07:20 PM ---------- Previous post was at 07:14 PM ----------
In open status bar my Device Shows Date as well (left end of status bar)
Any guide of method to remove that ??
Thankx in advance.
I created this in the Sensation forum. I have spent 1 and a half days creating, coding and running batch files in command prompt to ensure this will work for anyone AND ENSURE IT IS NOOBPROOF FOR EVERYONE.
UPDATE: V2 below, see below for details on changes.
The Lockring kit below is Unique to me and there isnt anything like it out there.
Here is my detailed guide to Modding your own lockscreen. LockRing kit i created is attached below and is COMPATIBLE WITH ANY SENSE 3 ROM OR Sense 3 THEME .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THERE IS VERY LITTLE WORK and NO CODING INVOLVED FOR YOU. ALL YOU DO IS
You put your ROM zip in the place ROM Folder - No need to rename
Place your lockring in lockring folder - No need to rename, just make sure its a PNG file not JPG
then collect the finished file in collect recovery zip folder.
See the video guide in post 2 for how to extract lockring and how to use a new lockring
Batch files in the kit will do all the work for you.
Requirements
-Java (Java Runtime Environment) - You need this otherwise your lockring APK will not be signed and prevent installation in recovery.
-271 x 270 Lockring in PNG File Format - Easiest way to get a lockring is to google a PNG image of what you want as. e.g search for Assassins Creed PNG. Quite alot of PNGs come with a transparent background which is what u need.
1st TIME SET UP
Create a New Folder in C:\ called "Lock_Ring_Kit"
Open the lock ring kit zip file and copy all the files and folders into the folder you just created.
Guide to extract a lockring
To extract a theme and/or lockring from another ROM
IF you have seen A lockring on EVO 3d FORUM
IF you have a really cool ROM or theme and you want to take the lockscreen ring out of it.
STEP 1. Place Your ROM or THEME you want to take lockscreen from Place_ROM_ZIP_HERE
STEP 2. Click 1. Extract APKs_FROM_ROM.bat. This will automatically run 2._decode_from_APK
Step 3. Click 3. Extract lockrings (OPTIONAL).bat.
This will put lockrings from the Rom or theme into the extract_lockscreen folder. you can now use this lockring.
And the rest of the files will be placed in Mod_files_here Folder (more about this below)
Guide to mod your own LockRing
STEP 1. Delete any existing files in Place_ROM_ZIP_HERE and Place Your ROM or THEME in the folder. This will be used as a base.
STEP 2. Click 1. Extract APKs_FROM_ROM.bat. .
Once the APKs have been extracted This will automatically run 2._decode_from_APK
*If you have the apks you want to use as a base then just place them in the Place_APKs_FILE_here Folder and click Decode from APK *
STEP 3. Get your Lockring you want and put it in the Place_Lockring_here folder. Make sure your lockscreen image is flipped vertically(mirror upside down image). e.g
Sense uses upside down lockrings to display them right side up. use the 3.0.1 Flip Lockring with FSResizer.exe to flip it upside down if it isnt already.
STEP 4. Click 3.1 Replace Lockrings.bat. This is to replace the existing lockrings with your lockring
Step 5. Click 4. Encode and create recovery zip.bat.
This will Re-encode your lock ring into the APKs, sign them then produce a signed zip file you can flash in recovery
Step 6. Flash your File in clockwork and enjoy.
Additional Features
Mod_Files_Here Folder you can go into this folder and into the default folder or other skins In this folder you can replace the navigation bar in Sense homescreen, also background for widgets and clock numbers etc. care should be taken u replace pngs with the another of the same dimensions.
Backup and Restore allows u to back up 4 different lock rings + Fusion files and restore them anytime so u can work on different ones at different times,
FS resize will allow u to resize your lock ring to 271x270 and also flip it upside down if it isnt upside down. Make sure you flip not rotate!
Download Lock_Ring_Kit or click the attachment below
BUG FIXED in v2 -->WHEN DRAGGING AN APP TO THE LOCK RING IT WOULD SHOW THE PREVIOUS RING!
Added option to rename lockring zip to whatever you want before it is put in collect here folder
If you get system could not find file error on some occasions, its normal, as i have either asked for it to delete something but the files already deleted
just make sure u follow the process.
Downloading now..thanks for makin this,
Should work well! Good job!
Sent from my PG86100 using XDA App
I've had 4 users test it so far And its only been uploaded for a few hours. All was fine. Let me know how it went
Sent from my HTC Sensation Z710e using XDA App
Hey man, thanks for the tool! I cant seem to be able to successfully create a working zip
I am using HighROM as a base as it is a GSM ROM.
I have create a .png image and i'm following the steps but after successful install,
the lockring is the same!!
I must be missing something obviously, I have tried reversing the process, using the xl_viper_lx_Mods.zip and decompiling to check the contents. what I have is
Bluesky, Burgundy, Default are all empty but I have 0x00000d89.dat(showing as my lockring) in the Lock_ring_motion folder
please can you point me in the right direction, cos I can crack this one..
I am not a nooob honest (feelin like one tho!)
Thanks
are you sure you are putting your whole ROM in to the place rom folder.
when u decompile viper mods it should only have two apks.
xl VipeR lx said:
are you sure you are putting your whole ROM in to the place rom folder.
when u decompile viper mods it should only have two apks.
Click to expand...
Click to collapse
yeah i'm puting the whole ROM .zip into the place ROM folder,
I have just been reading the sensation thread to see if there are any clues there....
the folders I was talking about are left in the Lockscreen extract after i have decompiled with the tool using the first set of instructions, just to test..If I look in the archive of the .zip I do have just the 2 .apk's in the system\app folder as I should have.
* I have just re-downloaded the tool from the sensation thread and i will try from fresh just run it again from a clean set of tools
come see me
http://webchat.freenode.net/?channels=xlviperlx
thanks for the post.
will try this tonight when I get home. already have a sweet lockscreen wallpaper, now to change that pesky ring.
Awesome Thanks Viper!
I was having some trouble with extracting the apk's from gsm ROMs, I'm now using the attached base files which work fine.
Viper helped me to work it out on IRC, thanks mate, and we found the tool wasn't extracting the apk's for some reason??
use the files below and it couldn't be easier!!
Link
Posted some rings Ive been playing with in Photoshop
I made this Lockring using the tools and guide thought I would share
http://www.multiupload.com/OXJW01M4QW
xl VipeR lx, I sent you a private message regarding some issues. Please let me know what you think.
Nice guide! Stay over here in the 3d forums. They're just fine over in the sensation forums.
BABABOOEY!
osrix said:
Awesome Thanks Viper!
I was having some trouble with extracting the apk's from gsm ROMs, I'm now using the attached base files which work fine.
Viper helped me to work it out on IRC, thanks mate, and we found the tool wasn't extracting the apk's for some reason??
use the files below and it couldn't be easier!!
Link
Posted some rings Ive been playing with in Photoshop
Click to expand...
Click to collapse
Yes the tool works fine. But m10 brings up unhandled file error when trying to decode the m10 error
And thanks seedogg I'll update tonight
Sent from my HTC Sensation Z710e using XDA App
Another note on the bug: if you have flashed a lockring made using the original lock ring kit, you will have to delete Idlescreen_base.apk (lower case b) from /system/app using root explorer.
Hi there!
I've tried multiple times and also used the base lock ring, combined with the .dat files of my custom lock ring but I can't get it to work. I followed all the steps and all I get errors and no flashable zip.
The only thing I want to change is a simple custom lock ring. There are a zillion different lock rings out there and I can't seem to even get one working. Am I the only one with this problem??
Could someone with the skills please assist me with this as I don´t have the knowledge to see what I am doing wrong.
Please help as I am out of options.. Any tips will be very, very much appreciated! Thanks in advance.
EDIT: I've followed the steps more carefully and made the conclusion that I did'nt put the right lockscreen file in the designated folder. Now I've used the right (horizontally 180 and mirrored) png file along with the Orighinal Rom and also with the Base Lock Ring. Now I don't get any errors and everything seems successfull. After completing step 4 there should be a flashable zip in the 'Collect recovery zip here' folder, but this folder stays empty. So maybe someone could point me in the right direction as I am following these steps completely, but no flashable zip is created...
Look in your Mod_files_here folder. Do you have 4 folders with a bunch of png and dat files inside?
Bramgg, I sent you a pm.
Everything seems to go fine until in bat 4. when I get to the part where it is looking for *.apk in Lock_Ring_Kit\M10_Tools\EXTRACTED_APK\Fusion\ It says can't find and that is true when I look it is not there????
It also looks for the *.apk in \Idlescreen_Base\ which is not there either???
The bat then continues merrily along "adding" stuff until it gets to "Signing APKs and then it says that " 'java' is not recognized as an internal or external command, operable program or batch file. In the next line it says "The System cannot find the file specified."
It then goes back to the fact that it can't find the two original files and then says "0 files copied."
Then back to building the flash zip and adding files coming then to signing the flash zip and then the same comment about 'java".
It then asks for the name of the Lockring Mod Zip file and that is about the end of the process. Even if you provide a name for the file it doesn't work and there is no zip file to retreive.
I have Java 6, build 29 on my Windows 7 home premium machine.
Any help would be greatly appreciated.
Thanks
guide!
This is an excellent guide, thanks for this!
Did this for a friend on the razr - but I'm on an Atrix 2, so it's not that much different... (original post can be found here)
Included are ODEXED versions (for your stock, rooted razr, if you so desire) of the 1% battery increments and horizontal scrollable quick panel toggles. This will also remove the carrier name from the pulldown menu (you're on your own for getting it back or removing it from the lockscreen if you want - this might help).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: CDMA ONLY - This was made from and installed on DROID RAZR System version 6.16.211.XT912.Verizon.en.US on ICS 4.0.4 - not sure about cross-system compatibility, but I wouldn't try it without a backup plan..
I am not responsible for your phone.
Download & Install:
(The following is the way I installed it using whirleye's BootMenu app - feel free to unzip and/or use your own method to install)
-Download RAZR_ICS_ODEXED_1perBatt_DropTogs.zip to your sdcard
-Boot into recovery with BootMenu
-Wipe dalvik & cache partition
-Install zip & Reboot
Credits & Thanks:
I ported these both over to ICS from GB for the A2... then moved them over to the RAZR (it involves a lot of edits, additions, deodexing and re-odexing)
-Major credit goes to nitroglycerine33 for the scrollable toggles
-Thanks also to cogeary for bringing nitro's work to the A2
-Thanks to he_stheone64 for the battery icons (except the unknown (?) batt image, that was me)
-Thanks to iwabashu for the use of the RAZR and the screenie
-----------------------------------------
Original post (but, very applicable to the RAZR variants): http://forum.xda-developers.com/showthread.php?t=1803516
PORTING THE 1% BATTERY INCREMENTS & DROPDOWN (QUICK PANEL) TOGGLES TO YOUR SYSTEM VERSION
This guide is based on moving these mods for ICS to other similar ICS-running devices. The process varies a bit going from GB to ICS. Or ICS to JB..
You will need:
Your deodexed SystemUI.apk
Your deodexed services.jar
Copies of deodexed SystemUI.apk & services.jar with the mods
Apktool /Smali/Baksmali tools
Notepad++ or similar text editor
7-zip or similar archive manager
WinMerge or Meld or similar diff/compare tool (a very useful tool that allows you to compare two folders or files side-by-side, and points out the differences for you)
Click to expand...
Click to collapse
My “get started” thread may hold some tips for accomplishing the tasks below – check it out HERE
IMPORTANT: This guide is to help you get these mods to your system, for your personal use. If you take the toggles from above and decide to use them in a ROM, be certain to credit nitroglycerine33 for his work.
Click to expand...
Click to collapse
Don't forget to install your framework for apktool by putting your framework-res.apk next to apktool, cd to that folder (or hold-shift right-click), and do a:
Code:
apktool if framework-res.apk
SystemUI.apk:
-decompile your deodexed SystemUI.apk
-rename the one with the mods to something else like SystemUI2.apk, and decompile also
For the dropdown toggles:
-add quickpanel smali
Copy the “quickpanel” folder from the modded com\android\systemui\statusbar folder to the same location in your stock
-add quickpanel_quick_settings.xml to layout folder
Open the modded SystemUI.apk\res\layout folder and copy the quickpanel_quick_settings.xml to your stock layout folder
NOTE: Some older toggle mods may not have this xml, all of the code was included in the status_bar_expanded.xml (Big thanks to nitroglycerine33 for the new xml code that is so much easier to work with)
-edit status_bar_expanded.xml or status_bar_tracking.xml for new qp xml (see below for options - some don't have the _tracking.xml - it's all in expanded, I think)
Open the modded SystemUI.apk\res\layout\status_bar_expanded.xml and add this line:
Code:
<include layout="@layout/quickpanel_quick_settings" />
(this will put the toggles between the date and notifications)
OR
(this will put the toggles above the date, directly under the status bar)
OR
delete the "include layout" line entirely from status_bar_expanded and open status_bar_tracking.xml
(this will put the toggles at the very bottom, attached to the close bar)
-add 33 quickpanel images
Add or copy the 33 .png images associated with the quickpanel toggles from the modded SystemUI.apk\res\drawable-hdpi to your stock /drawable-hdpi folder
-add qp lines to ids.xml
Open the modded SystemUI.apk\res\values\ids.xml and copy all of the quickpanel ids to your stock ids.xml (there should be 41 lines at the bottom of the xml – selected in the screenshot below)
-add qp lines to strings.xml
Open the modded SystemUI.apk\res\values\strings.xml and copy all of the quickpanel strings to your stock strings.xml (there should be 15 lines at the bottom of the xml – selected in the screenshot below)
-add qp to public.xml
(NOTE: The resource ID’s in the public.xml need to be unique – meaning that no two alpha-numeric IDs can be the same. If you are lucky, you can just use the trick below and copy the resource IDs entirely from the modded xml. So, before you copy and paste, check a few of the modded resource ID’s against your stock. If you need to assign new ID’s, just stop here, compile your SystemUI.apk, then decompile it again and look for the new IDs created in the public.xml – you will then need to copy those resource IDs over to the quickpanel smali files - with a lot of cross-referenceing.)
Open the modded SystemUI.apk\res\values\public.xml and copy the quickpanel lines from the public type = “drawable” (33 lines), “string” (15 lines), and “id” (41 lines) to your stock public.xml (do not worry about the drawables for the battery images)
For the 1% Battery:
-add stat_sys battery xmls
Open the modded SystemUI.apk\res\drawable folder and copy stat_sys_battery.xml and stat_sys_battery_charge.xml to your stock drawable folder and overwrite the existing
-204 battery images
Add or copy the 204 .png images associated with the 1% battery increments from the modded SystemUI.apk\res\drawable-hdpi to your stock drawable-hdpi folder
-compile the SystemUI.apk (make sure that you saved your original signatures (META-INF folder), and do not compress the resources.arsc - meaning, take it out of the apk and re-add it to the apk in "store" mode with 7-zip)
-it is suggested to decompile the newly modded apk, and check that all of your new edits are still there
Click to expand...
Click to collapse
services.jar
For 1% battery mod only (toggles are done):
-baksmali the classes.dex from your services.jar, and rename the folder to my_classout, or something
-baksmali the classes.dex from the modded services.jar, and rename the folder to mod_classout, or whatever
-edit BatteryService.smali
Open the modded com\android\server\BatteryService.smali and your stock BatteryService.smali with WinMerge or Meld and compare the two files.
(What..? You didn't think I'd do it all for you, did you?)
Update: See HERE
-reassemble (smali) into a new classes.dex and copy to and overwrite the existing one in your services.jar with an archive manager
Click to expand...
Click to collapse
***ATTACHED ARE THE DEODEXED STOCK & MODDED XT912 FILES FOR YOUR REFERENCE AND TO COMPARE***
If this is for an ODEXED system, you must then re-odex the SystemUI.apk and services.jar. See HERE for how to do that
These were originally ported using a similar process from GB to ICS for the Atrix 2 (except I ended up re-doing all of the resource ID's in the quickpanel smali). Since then, I have used the above method to move both mods over to the RAZR. --- UPDATE 9/13/12: I also used this method to move the 1% battery increments over to CM10/JB for the A2... watch the v3, v4, etc, notation in the BatteryService.smali... pay attention to detail.
Please post questions or PM with complaints.
Big thanks to nitroglycerine33, cogeary, and whoever else first did the smali/xml coding, and all the devs/modders who came before..
EDIT (2012.12.25): Attached a zip below to restore stock odexed xt912 ICS files and remove this mod. Wipe dalvik cache and flash in custom recovery.
Any confirmation from anyone that all toggles work? I would love to do this to my phone. Im on. 215 willing to try it. But what happens if it doesnt work. How do i revert back to normal? Sbf?
Sent from my DROID RAZR using xda app-developers app
lrlooly said:
Any confirmation from anyone that all toggles work? I would love to do this to my phone. Im on. 215 willing to try it. But what happens if it doesnt work. How do i revert back to normal? Sbf?
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Not sure if it will work on .215..
But, you should always have a good backup just in case something goes wrong.. sbf should be a last resort.
Or you can create another zip package with your current working copies of the 4 files that will be replaced by this zip package. You can probably just use this zip package and drop your current apk/jar/odex files in there and put it on your sdcard also... And if it bootloops, go into recovery and flash the zip to restore your original files..
This might help - there's a small section at the end about making zip packages: http://forum.xda-developers.com/showthread.php?t=1753659
Sent from my phone's mind
Just an warning for GSM Users > Crackflasher as i'm, i had to try it
Stuck on Bootanimation, so nandroid back
HSD-Pilot said:
Just an warning for GSM Users > Crackflasher as i'm, i had to try it
Stuck on Bootanimation, so nandroid back
Click to expand...
Click to collapse
Yea.. cdma only - as it's the SystemUI.apk and services.jar getting changed.
I updated the OP. Sorry bout that.
Sent from my phone's mind
No problem, I expected nothing else
I just tried it anyway.
Sent from my CustomiZed XT910
Wont install on. 215. Not sure if there is something i did wrong however.
Sent from my DROID RAZR using xda app-developers app
Did not work for me either, stock ics, rooted. I would love to get this on my phone.
Sent from my DROID RAZR using xda premium
alteredlikeness said:
NOTE: CDMA ONLY - This was made from and installed on DROID RAZR System version 6.16.211.XT912.Verizon.en.US on ICS 4.0.4 - not sure about cross-system compatibility, but I wouldn't try it without a backup plan..
I am not responsible for your phone.
Click to expand...
Click to collapse
lrlooly said:
Wont install on. 215. Not sure if there is something i did wrong however.
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
chris3582 said:
Did not work for me either, stock ics, rooted. I would love to get this on my phone.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
If it's not the system version listed, it doesn't work for you.
chris3582 - what version are you? How are you trying to install?
And you guys all have recovery on boot working before trying these things, right?
Sent from my phone's mind
chris3582 said:
Did not work for me either, stock ics, rooted. I would love to get this on my phone.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
The updater script uses busybox. If you don't have busybox in sbin directory it most likely will not install.
From my ICED down MAXX!
alteredlikeness said:
If it's not the system version listed, it doesn't work for you.
chris3582 - what version are you? How are you trying to install?
And you guys all have recovery on boot working before trying these things, right?
Sent from my phone's mind
Click to expand...
Click to collapse
I am trying to flash it using safestrap.
Sent from my DROID RAZR using xda premium
chris3582 said:
I am trying to flash it using safestrap.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Yea, that's what I was afraid of.. I do not have much experience with safestrap. It might just be that the updater-script needs to be revised... it's made for cwm recovery, and I used whirleyes BootMenu to install..
If someone with experience wants to convert this mod to work with safestrap.. please feel free
Sent from my phone's mind
Awesome!
Thanks! works perfect.
I tried it with my stock rooted vzw .215. It doesnt work. My phone would just stay in the start-up animation. I had to fastboot back to. 211.
lrlooly said:
Any confirmation from anyone that all toggles work? I would love to do this to my phone. Im on. 215 willing to try it. But what happens if it doesnt work. How do i revert back to normal? Sbf?
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
DROIDESP said:
Thanks! works perfect.
Click to expand...
Click to collapse
Finally! - Thanks for letting me know that it does work on someone else's phone! I mean, with over 30 downloads you are the first to verify it works (besides my friend who I originally made it for).. thanks.. and enjoy
Sent from my phone's mind
alteredlikeness said:
Yea, that's what I was afraid of.. I do not have much experience with safestrap. It might just be that the updater-script needs to be revised... it's made for cwm recovery, and I used whirleyes BootMenu to install..
If someone with experience wants to convert this mod to work with safestrap.. please feel free
Sent from my phone's mind
Click to expand...
Click to collapse
Can anyone let me know if this works with the Razr stock recovery and not just CWM?
Thanks!
Screenshot Included
alteredlikeness said:
Finally! - Thanks for letting me know that it does work on someone else's phone! I mean, with over 30 downloads you are the first to verify it works (besides my friend who I originally made it for).. thanks.. and enjoy
Sent from my phone's mind
Click to expand...
Click to collapse
Thanks again! Thought I would send a screenshot so you know!
DCDD85 said:
Can anyone let me know if this works with the Razr stock recovery and not just CWM?
Thanks!
Click to expand...
Click to collapse
Stock recovery? Probably not. Why not just install BootMenu?
Also, you guys can just take the apk/odex files from the zip and install them by different means.. like adb or root explorer.. just make sure that you set proper permissions, then reboot.
Sent from my phone's mind
DROIDESP said:
Thanks again! Thought I would send a screenshot so you know!
Click to expand...
Click to collapse
Thanks!
Side note: Kenosha, huh? I'm in MKE... and the guy I made it for is near Burlington.. small world
Sent from my phone's mind
Ha!
alteredlikeness said:
Thanks!
Side note: Kenosha, huh? I'm in MKE... and the guy I made it for is near Burlington.. small world
Sent from my phone's mind
Click to expand...
Click to collapse
Funny, I strongly considered removing BW before taking that screenshot.... Its a very small world! I'm up in MKE all the time. PM me sometime we can break some phones.