Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
yasirfaheem said:
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Me too .....
Sent from my Transformer TF101 using Tapatalk
While this isn't silicone, it may be what you are looking for. I am to interested in being able to hold both.
http://tuff-luv.com/faux-leather-bo...ablet-black.html?source=webgains&siteid=54264
yasirfaheem said:
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
I do not know of any silicone cases that can remain totally in position when the tablet is attached to the docking station HOWEVER you can just release the silicone case from the bottom of the tablet and it then fits easily into the dock BUT remember that whilst on the dock the case is bent up at the back of the tablet a little.
yasirfaheem said:
Hello Everybody,
I and looking for a silcone case that i can keep on the tablet when i put it in the keybozrd docking station. Does any one know of any that will work?
Thanks,
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
You mean like this? Look at pictures.
Arobase40 said:
I'm not quite sure if I understand the pictures well and how this really works ?
Is the Dock also protected by a silicone case or only the Tablet ?
Is it possible to have a retailer link or the manufacturer link for this product to have additional pictures, details and price ?
Thx
Click to expand...
Click to collapse
There's another piece for the dock. I didn't have it on, though. In fact, I just took the silicone off and put on carbon fiber skin. The silicone added probably 50 pounds to the overall weight.
It's the following skin.
http://www.overstock.com/Electronic...Soft-Gel-Case/6434147/product.html?cid=123620
Just measure very carefully and very very carefully cut out the bottom. Just use your imagination. Look at my pictures again. See how everything fits?
Arobase40 said:
Hmmm, I exercised my imagination pretty hard but couldn't find out the dock piece nor how the silicone gel skin can add "50 POUNDS" (22.68 kg) to the overall weight.
I was also searching on eBay, but couldn't find anything close to the product described on the OP...
The intention was good anyway.
Click to expand...
Click to collapse
You have a pretty crappy imagination
I think he used 2 modified skins from his link and modified both to fit the hinge and dock.
Also it looks like a decimal was misplaced lol. .50 lbs I could see.
Sent from my MB860 using Tapatalk
Spoontain said:
Also it looks like a decimal was misplaced lol. .50 lbs I could see.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Ever heard of an exaggeration to make a point?
It was more at the other guy saying he couldn't see how it could add 50lbs, but good on ya
Sent from my MB860 using Tapatalk
Related
can someone recommend a case like the ipad 1? I like the thin and still sturty feel. Perfer from amazon.
Or can anyone recommend a good thin and protective case for the transformer?
also need a screen protector.
Thanks you advance!
hipertec said:
can someone recommend a case like the ipad 1? I like the thin and still sturty feel. Perfer from amazon.
Or can anyone recommend a good thin and protective case for the transformer?
also need a screen protector.
Thanks you advance!
Click to expand...
Click to collapse
The case made by asus is an almost exactly copy of the ipad 1 case... This is similar and is on buy.com http://mobile.buy.com/ibuy/ProductDetail.aspx?loc=108&sku=223077071&adid=18094&siteID=je6NUbpObpQ-3xsoAE_5o0Bb8aU4ozypEQ
Sent from my Transformer TF101 using XDA Premium App
techdude54 said:
The case made by asus is an almost exactly copy of the ipad 1 case... This is similar and is on buy.com http://mobile.buy.com/ibuy/ProductD...094&siteID=je6NUbpObpQ-3xsoAE_5o0Bb8aU4ozypEQ
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
This is a very true statement. I have this case and it is IDENTICAL to my ipad one. I wish that we could get the smart cover for the transformer like the ipad 2 has....its the only think i m jealous of!
Kov695 said:
This is a very true statement. I have this case and it is IDENTICAL to my ipad one. I wish that we could get the smart cover for the transformer like the ipad 2 has....its the only think i m jealous of!
Click to expand...
Click to collapse
Yea... Needddd moooaaarrr annggllleeesz
Sent from my Transformer TF101 using XDA Premium App
thanks. i cant believe how much the asus case is going for. i end up ordering the $12.99 from buy.com
hoping the quality is good and pretty thin and light.
Kov695 said:
This is a very true statement. I have this case and it is IDENTICAL to my ipad one. I wish that we could get the smart cover for the transformer like the ipad 2 has....its the only think i m jealous of!
Click to expand...
Click to collapse
Have you used one? If so I would think you would be a little less jealous. The magnets and bracket are flimsy so it bends and/or falls off pretty easily. Also in the completely open (bent back) position it doesnt quite fit the ipad right. Also a couple of people Ive known have had the magnetic off/on stop working, one would assume it was an alignment issue.
Its an interesting idea and I can understand they want to stick to the magnets for simplicity but its not the most durable solution.
Sorry if there's a thread on this already but I'm looking for a decent Transformer Prime case, preferably one that also protects the keyboard, anyone got any ideas? Cheers
Check out the Accessories section, a TON of options
nevermind
10char
Oh sorry, so used to using this and the dev sections didn't notice the other ones!
crimsonnight said:
Sorry if there's a thread on this already but I'm looking for a decent Transformer Prime case, preferably one that also protects the keyboard, anyone got any ideas? Cheers
Click to expand...
Click to collapse
Most 10" neoprene netbook cases will fit it just fine look at Case Logic ones or Proporta if your stuck. They are good quality.
Sent from my Desire HD using XDA App
Hi there
Anyone found a click in case like ipad or tf prime?
I am looking for one with no success.
Like this one found here
http://www.asus.com/Peripherals_Accessories/Eee_Pad_Accessories/Eee_Pad_Transformer_Prime_TF201_TranSleeve/
Sent from my Transformer TF101 using xda premium
Case
I have this:
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280744811798&ssPageName=ADME:X:RTQ:US:1123
And it's perfect
Hi there
Can't open the shortcut.
Sent from my Transformer TF101 using xda premium
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=280744811798&ssPageName=ADME:X:RTQ:US:1123#ht_7129wt_754 was his link.
more expensive than this, but very similar looking if not identical. http://www.amazon.com/gp/product/B005ECB3PU/ref=oh_o03_s00_i00_details
I have the poetic stand mentioned in the above Amazon link. Best 20.00 I could have spent. Love it.
Sent from my SAMSUNG-SGH-I777 using XDA
I use the Blurex case. Great for watching movies!
http://www.amazon.com/BLUREX-Leather-folio-Multi-Angle-Transformer/dp/B005ESY8VA
There's also a thread from a few weeks back with other members who had good experiences with it:
http://forum.xda-developers.com/showthread.php?t=1299360
Hope that helps!
does the prime cover fit our transformers? if so ill get one
ive got one in amazon http://www.amazon.co.uk/Black-Textu...PC/ref=sr_1_20?ie=UTF8&qid=1331512420&sr=8-20 and is great and very afordable.
I recomend this one.
Sent from my Transformer TF101 using XDA
So I am guessing nobody actually went to the link in the OP's post since you all are just linking the case you own and not really answering his question.
To the OP: No, I am pretty sure a "click in" case like the one in your link doesn't exist for TF101. The one made for Prime won't fit a TF101 either.
Thank's your the only one actually answering my question.
I was thinking that my English was in fact Chinese!
Too bad that the click in doesn't exist I will persist the search. I really like the case.
Best regards
Sent from my Transformer TF101 using xda premium
i meant to answer your question, but i missed your link and assumed the second post's link was yours.
No problem thanks anyway
Sent from my Transformer TF101 using xda premium
Not sure what you mean click in case. I got the following case from China and really like it! Fits well.
http://www.ebay.com/itm/180825489966?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Bobsinclair25 said:
Not sure what you mean click in case. I got the following case from China and really like it! Fits well.
http://www.ebay.com/itm/180825489966?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
Does the dock fit with this and close properly?
It fits really well. It closes nicely when the dock is attached. Without the dock you have the two snaps for the cover that show, but with the dock it closes nicely (However, it adds some bulk
Sent from my Transformer TF101 using XDA Premium HD app
i would love to see the click in case in person to determine why it doesn't work on the tf101. I don't feel like spending $40 for the privilege though.
Does such a thing exist? I'm thinking of a trifold cover similar to the ipad that would allow the tablet to sit up on the table in two positions, and then when you wanted it docked it could do that as well...
Thanks!
Sent from my ASUS Transformer Pad TF300T using xda premium
Not sure how it docks but seems like it would work it near upright ''mode"
I would probably atteck two rubber feet soon the nearside of the keyboard to make it even
Sent from FIREING MA LAZER... \BAUGHHHH/
Im personally waiting for one of these
http://www.handhelditems.com/keyboa...er-asus-transformer-tf300-black-p-188771.html
They are going to be on amazon too but not till early July
T_VASS said:
Im personally waiting for one of these
http://www.handhelditems.com/keyboa...er-asus-transformer-tf300-black-p-188771.html
They are going to be on amazon too but not till early July
Click to expand...
Click to collapse
That one is nice, but wish it was leather.
David Dee said:
That one is nice, but wish it was leather.
Click to expand...
Click to collapse
They have a brown leather one on Amazon and of course the ones from China on ebay
I don't know, that link to the handheltitems product looks very clunky and doesn't trifold, so it only stands up *almost* vertically, and if you want to lean it back any, you can't because the back side just slides away...
I'm thinking literally just a trifold cover, not a case I guess, that attaches somehow like the ipad one does.
Sent from my ASUS Transformer Pad TF300T using xda premium
Id go with a trifold, and still might.. I had one with my KF but id really like something that includes the keyboard dock..
There is a very nice leather one at cellmacs.com
I cannot post links but if you go to their website and just search for TF300T you'll find it. Good quality, reasonably priced and free shipping.
kennkerp said:
There is a very nice leather one at cellmacs.com
I cannot post links but if you go to their website and just search for TF300T you'll find it. Good quality, reasonably priced and free shipping.
Click to expand...
Click to collapse
http://www.cellmacs.com/Leather-TF300T-Case-p/tf3.htm
I'm still leaning towards the one on the 3rd post.... it's still the best option IMO, and comes in carbon fiber leather! Come on June 18th!
I bought this one and I love it. All holes line up and it's nice to have it all folded up and protected. My only flaw is when I'm a lefty, when I use it vertically I have to turn the tablet upside down because when open it up like a book the power button is on the bottom left corner and the volume rocker is on the bottom of the unit on the left side. Other than that I love it
Sent from my SGH-T989 using xda premium
mightyab said:
I bought this one and I love it. All holes line up and it's nice to have it all folded up and protected. My only flaw is when I'm a lefty, when I use it vertically I have to turn the tablet upside down because when open it up like a book the power button is on the bottom left corner and the volume rocker is on the bottom of the unit on the left side. Other than that I love it
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
What specific case are you referring to above?
David Dee said:
What specific case are you referring to above?
Click to expand...
Click to collapse
This is the case I got
http://www.ebay.com/itm/Leather-Key...?pt=US_Tablet_Accessories&hash=item3f17bc5b4c
Sent from my SGH-T989 using xda premium
mightyab said:
This is the case I got
http://www.ebay.com/itm/Leather-Key...?pt=US_Tablet_Accessories&hash=item3f17bc5b4c
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thanks, that's the Poetic Leather Case. Do the button holes stick out when you are using the case as a portfolio without the keyboard?
The only hole for the buttons are the volume rocker buttons and they are pretty flesh with the holes. I will take some pictures tonight when I get home. What kind of pictures would you like to see?
Sent from my SGH-T989 using xda premium
mightyab said:
The only hole for the buttons are the volume rocker buttons and they are pretty flesh with the holes. I will take some pictures tonight when I get home. What kind of pictures would you like to see?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Sorry, I mean't the two metal buttons for attaching the keyboard piece. When the keyboard is removed, are those exposed?
David Dee said:
Sorry, I mean't the two metal buttons for attaching the keyboard piece. When the keyboard is removed, are those exposed?
Click to expand...
Click to collapse
Yes they are exposed. But I dint think it's bad, it's done well plus it's on the back of the portfolio
Sent from my SGH-T989 using xda premium
mightyab said:
Yes they are exposed. But I dint think it's bad, it's done well plus it's on the back of the portfolio
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Great, thanks.
No problem man. Here are some pictures for you. The buttons don't protrude to far out of the case, they are counter sunk in port good in my opinion.
Sent from my SGH-T989 using xda premium
Just wanted to drop in and give a recommendation on this case. It's keyboard compatible and holds shut with magnets. You can remove the dock pretty easily and it protects just as well without it.
I picked one up without any reviews, and I don't regret it. I think it's my perfect case!
amazon DOT com/MoKo-Transformer-Multi-Functional-Compatible-Keyboard/dp/B007S9ZG5A/ref=cm_cr_pr_pb_t
(can't post links yet)
+3 for the Poetic case.
As in I have bought 3 of them now, the first for myself and then 2 more as gifts. Incredible case. Can't recommend it highly enough.
Hi all,
I was hoping somebody could point me in the right direction for a decent case that protects better than a generic fit 10.1" case I could buy at the local Wal-Mart. I use my tablet with the dock attached 98% of the time and it travels to work and home with me everyday. I would love to have it in a good protective case that would allow the dock to remain attached but I didn't know if anything existed, or at least something I can't seam to find.
Artifesto said:
Hi all,
I was hoping somebody could point me in the right direction for a decent case that protects better than a generic fit 10.1" case I could buy at the local Wal-Mart. I use my tablet with the dock attached 98% of the time and it travels to work and home with me everyday. I would love to have it in a good protective case that would allow the dock to remain attached but I didn't know if anything existed, or at least something I can't seam to find.
Click to expand...
Click to collapse
I like the Gumdrop brand myself. Not 100% hardshell, heck the bak is rubber with no exo-skelton of any kind. Does come with integrated/replaceable screen protection and it covers all openings. Check it out.
You may also want to check out Bob J Gear.
I have a gumdrop case on my Galaxy Tab. It is a good case but I would like to maintain 100% usability of my keyboard/dock
Sent from my ASUS Transformer Pad TF300T using Tapatalk
Artifesto said:
Hi all,
I was hoping somebody could point me in the right direction for a decent case that protects better than a generic fit 10.1" case I could buy at the local Wal-Mart. I use my tablet with the dock attached 98% of the time and it travels to work and home with me everyday. I would love to have it in a good protective case that would allow the dock to remain attached but I didn't know if anything existed, or at least something I can't seam to find.
Click to expand...
Click to collapse
Look on Amazon they have a case for the dock and tab that's detachable.
Sent from my SGH-I747 using xda app-developers app
do you know the name of it?
Sent from my ASUS Transformer Pad TF300T using Tapatalk
mhays705 said:
Look on Amazon they have a case for the dock and tab that's detachable.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
http://www.amazon.com/gp/aw/d/B00832SKWM
There you go.
For 20 $ I think it's an amazing deal.
Sent from my SGH-I747 using xda app-developers app
mhays705 said:
There you go.
For 20 $ I think it's an amazing deal.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
That's pretty nice, I may give that a go and see how it is. I need to find something, today I left my tablet on top of a 6 foot tall 480v transformer and it fell out of my passenger seat of my truck going down the interstate so it takes some abuse. But I use the dock for typing documents 3-7 times a day which is why it is important I can keep it attached.