Hey all,
I am having trouble making the custom boot animation for my tbolt.
I copied off the one from /system/media, which is from Das BAMF. When copied my own bootanimation.zip nothing happens. No boot animation, just wait 30 seconds or so and the phone comes up.
I have the 3 folders set up for android, progress, and VZW, and the desc.txt which i copied straight from the original bootanimation.zip
I have 120 JPG files in VZW which are all my animations. In my progress folder i have a .GIF instead of a JPG which i dont think is a problem. and in the android folder i have a modified HTC screen.
Can anyone who has successfully created on let me know what i may be doing wrong??
MODS, Close Thread, issue resolved now
So far I've found a lot of helpful threads on boot animations... I am simply modifying the existing one on my phone...
what I'm trying to do...
when a thunderbolt boots up it says "HTC"
then it says "HTC quietly brilliant"
then the thunderbolt clip with BAMF in the bottom right corner...
I WANT to replace the .PNG file that has "HTC quitly brilliant" to "HTC quietly rooted" with a pic of an android eating an apple...
THATS IT... I have made the picture i want in photoshop, named it the same name...
I have copied the zip off my phone, put that picture (png file) over the existing one in the .zip.... then renamed the bootanimation.zip file in my phone to bootanimation_original.zip and copied the new verizon to the same file as bootanimaton.zip... the phone boots... says "HTC" then its black and goes straight into the thunderbolt boot thing...
the only thing i can think is that the file is too big... the original is about 14kb the new one is 26kb... I tried saving it smaller but that was as small as i can get it through photoshop...
any help would be much appreciated!... (i also changed the file to 'read only' as the original was also)
please help!
thank you!
So if i understand correctly, you are seeing the rest of the animation.
If that's the case, then it has to be a problem with the image. It could be something as simple as the file name.
If you can't get it figured out, post it here as an attachment and I would be happy to take a look at it for you.
Sent from my B.A.M.F. Thunderbolt
I don't think the file size matters i have made a bunch of different ones. One thing to check is inside the bootanimation.zip file there is a text document called Desc.txt you have to adjust your desc file accordingly. Mainly you want your image width and height.
your desc should look something like this
"480 800 15p 1 45 androidp 1 1 VZWp 1 300 progress"
480 and 800 being you width and height, 15p is your frames per second, 1 is the number of times for the video to loop( change to 0 if you want that animation to loop to boot is complete), and not sure about the 45 i think how long to wait before starting images in the VZW folder. and same goes for numbers after VZWp. Also not sure on the progress most likely to hold last image till boot process is completed.
Edit:
Also when you re compress the ZIP file make sure you change the setting for compression method to "Store"
gadget! said:
So if i understand correctly, you are seeing the rest of the animation.
If that's the case, then it has to be a problem with the image. It could be something as simple as the file name.
If you can't get it figured out, post it here as an attachment and I would be happy to take a look at it for you.
Sent from my B.A.M.F. Thunderbolt
Click to expand...
Click to collapse
Correct, I CAN see the rest of the animation, just NOT that part I replaced... here's how I did it at first... at first I just copied the file out, made the adjustments I waned, and then dragged and dropped it back in the zip'd folder (I use windows XP if that makes any difference) it put my file over the existing one in the .zip.... then i put that in place of the bootanimation.zip on the phone...
THEN i tried downloading 7-Zip... i unzipped the whole file, put my file in, re-zipped my whole folder with NO compression... that killed the entire animation boot up thing all together... I'm using se explorer with root permissions to put these in the system/media folder...
so... yeah... not getting very far...
Tried attaching the .zip but it was 11mb and i can only post up to 8mb .zips... i'll post JUST the image, which is the correct width/height...
it is also named exactly what the other file was named...
I'm not sure what bootanimation file you are starting with but since you say it says BAMF I'll assume it's the bootanimation from the das BAMF ROM.
Actually, I made the bootanimations for the BAMF ROMS.
The only thing that confuses me is that it is only about 4MB in size?
Attached is the one from the BAMF ROM with your picture in it.
Just rename it to bootanimation.zip, put it on tour TB and see if that's the one you wanted.
I put it on my phone to test and it works as it should.
I realize this thread is a bit old, but I'm having a similar problem.
I'm using cyanogenmod on my thunderbolt, but since I like red, I thought I'd try changing the boot anim.
So I extracted the original boot anim and hue shifted the images, then re-zipped it and i get nothing at all. Putting the original back works fine. Is there maybe something that 7-zip does to make it not work, or maybe something that photoshop did to the images? I have opened the zip that i made on the phone and viewed the images there so the gallery can read the images once extracted from the zip. (If that makes a difference.)
Edit: Apparently my problem was that the only way to get it to show was to use store for the zip compression.
I figured I would share with the community since people are finding ICS a little tricky
*JUST AN UPDATE. I FOUND THAT THE BEATS AND VZW FOLDERS CAN HAVE ANY NUMBER OF IMAGES*
What you need:
boot animation creator.exe (windows program) get it at http://forum.xda-developers.com/showthread.php?t=1234611 (credit to despotovski01)
7zip (windows program) http://www.7-zip.org/
fotosizer (windows program) http://www.fotosizer.com/
some type of boot animation (youtube video, collection of images, whatever)
the stock VZW boot animation (attached)
file explorer app (root explorer, es file explorer, etc)
Steps:
create a folder somewhere that you will be working from
in that folder, create a folder named VZW
use fotosizer to rename the images.
USE THESE SETTINGS : Preset size - original, destination folder (the folder you created earlier named VZW, output format - JPEG, file name mask (this is important) render_720x1280_compress %NNN
add your images to fotosizer and click start. it will output the images to the folder you chose all named "render_720x1280_compress xxx.jpeg"
grab the "beats" folder and the "android" folder from the stock animation
place these folders with VZW
open the boot animation creator.exe
choose the folder that contains beats, android and VZW and choose next
HERE IS THE TRICKY PART: the settings have to be like this or it wont work
android - 1 15
beats - 1 15
VZW - X 90 (x can be as many times as you want the image set in the VZW folder to repeat)
width - 720
height - 1280
speed - 15
choose next and save it anywhere you want. The file must be named Vigor_VZW_bootanimation.zip
Place the zip on your sd card and drop it where ever you ROM has its boot animation (either /system/customize/resource or /data/local or /system/media)
change the permissions to RW-R-R using a file explorer and reboot
IF YOU DON'T WANT THE BEATS ANIMATION:
use fotosizer once again to rename your first 35 images to "Beats Audio Animation as JPG Seq XX" the same way as you did with the VZW folder and place them in the "beats" folder
you will need to redo the naming process again for the VZW folder
follow the same steps for the bootanimation creator.exe program
IF YOU WANT LANDSCAPE
Simply open the folder that your images are stored in, single click on the first image, press and hold the shift key, click on the last image. right click and choose rotate clockwise. proceed as normal.
you can also create a flashable zip (include with the tools and credit Mr.Smith317) with the animation placed in the correct location
(there may be other ways of doing this process, but this ways has always worked without fail)
DOWNLOAD THE TOOLS
Adding sound :
grab your sound file. it must be an mp3 and shouldn't be longer than 15 seconds
rename it to android_audio.mp3
the default.xml file in /system/customize/CID needs to be edited
find this line 3/4 of the way down in the xml file
<BootAnimation animation="/system/customize/resource/Vigor_VZW_bootanimation.zip"
add this to the end
"audio="/system/customize/resource/android_audio.mp3" audiostart="VZW"/>
the whole line should be
<BootAnimation animation="/system/customize/resource/Vigor_VZW_bootanimation.zip"audio="/system/customize/resource/android_audio.mp3" audiostart="VZW"/>
*notice "/system/customize/resource/Vigor_VZW_bootanimation.zip? thats where your boot animation is stored*
place you audio mp3 file in the same folder as the boot animation
change permissions to RW-R-R
reboot
the sound will start to play when the VZW folder images start. if you want to change this edit this part of the line you added
audiostart="VZW"/> to what ever folder you want it to start at
racinwarrior said:
so i have been asked to create a few custom boot animations. I dont mind doing stuff, but i have been swamped at work. I figured I would share with the community since people are finding ICS a little tricky
What you need:
boot animation creator.exe (windows program, attached)
7zip (windows program)
fotosizer (windows program)
some type of boot animation (you tube video, collection of images, whatever)
the stock VZW boot animation (attached)
file explorer
Steps:
create a folder somewhere that you will be working from
in that folder, create a folder named VZW
use fotosizer to rename the images.
USE THESE SETTINGS : Preset size - original, destination folder (the folder you created earlier named VZW, output format - JPEG, file name mask (this is important) render_720x1280_compress 0%N
add your images to fotosizer and click start. it will output the images to the folder you chose all named "render_720x1280_compress xxx.jpeg"
change the first 9 images so that they are named "render_720x1280_compress 001, 002, 003" etc
if you have more than 100 images rename them as "render_720x1280_compress 100, 101, 102" etc (the goal is to end up with the imaged names 001 to XXX consecutively)
grab the "beats" folder and the "android" folder from the stock animation
place these folders with VZW
open the boot animation creator.exe
choose the folder that contains beats, android and VZW
HERE IS THE TRICKY PART: the settings have to be like this or it wont work
android - 1 15
beats - 1 15
VZW - X 90 (x can be as many times as you want the image in VZW to repeat)
width - 720
height - 1280
speed - 15
choose next and save it anywhere you want. The file must be named Vigor_VZW_bootanimation.zip
Place the zip on your sd card and drop it where ever you ROM has its boot animation (either /system/customize/resource or /data/local or /system/media)
change the permissions to RW-R-R using a file explorer and reboot
you can also create a flashable zip with the animation placed in the correct location
DOWNLOAD THE TOOLS
Click to expand...
Click to collapse
THANK YOU. i wanted to port my boot animation but it wasnt working. i cant wait to try.
I made a ton of boot animations a while back, mostly for the inc and EVO. I opened one of the stock Rezound ones up the other to look around inside at the files. Why are the folders duplicated? The one I looked at has 2 beats, 2 vzw, etc. They seem to have the exact same images in them.
Also. Which animation does what? On a couple if Roma I tried the.boot animation was different depending on how I booted. Doing a full power down and reboot was different than doing a hot reboot.
Sent from my ADR6425LVW
Hey man im not sure if you put the wrong thing in there or if i'm retarded, but the "Boot Animation Creator.exe" is a shortcut to the program not the program itself
Let me know if im missing something, thanks dude
who_mike_d said:
Hey man im not sure if you put the wrong thing in there or if i'm retarded, but the "Boot Animation Creator.exe" is a shortcut to the program not the program itself
Let me know if im missing something, thanks dude
Click to expand...
Click to collapse
Must have grabbed the wrong icon for the zip. I'm stuck in bed with tbe flu right now. I will try to fix it in a few hours
sent from your mom
silverxbv2 said:
I made a ton of boot animations a while back, mostly for the inc and EVO. I opened one of the stock Rezound ones up the other to look around inside at the files. Why are the folders duplicated? The one I looked at has 2 beats, 2 vzw, etc. They seem to have the exact same images in them.
Also. Which animation does what? On a couple if Roma I tried the.boot animation was different depending on how I booted. Doing a full power down and reboot was different than doing a hot reboot.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
They only need to have one set. Not sure which one you were looking at, but only one set is right
I think fastboot uses a different shortened animation
sent from your mom
Fastboot doesn't show any animation at all unless you full power off as far as I know.
racinwarrior said:
Must have grabbed the wrong icon for the zip. I'm stuck in bed with tbe flu right now. I will try to fix it in a few hours
sent from your mom
Click to expand...
Click to collapse
Boot animation creator: http://d01microapps.elementfx.com/Downloads/install_bootanimationcreator.msi
feel better man
MrSmith317 said:
Fastboot doesn't show any animation at all unless you full power off as far as I know.
Click to expand...
Click to collapse
I agree.....
Actually I think it uses hTC_bootanimation
sent from your mom
Front page man. Good job.
EmerikL said:
Front page man. Good job.
Click to expand...
Click to collapse
sweet.......
If you change "render_720x1280_compress 0%N" to "render_720x1280_compress %NNN" you don't have to go back and add the extra 0 to the first 9 or fix anything over 100.
knuckles562 said:
If you change "render_720x1280_compress 0%N" to "render_720x1280_compress %NNN" you don't have to go back and add the extra 0 to the first 9 or fix anything over 100.
Click to expand...
Click to collapse
nice...ill update the OP thanks
racinwarrior said:
sweet.......
Click to expand...
Click to collapse
http://www.xda-developers.com/android/make-your-own-ics-boot-animations-for-the-htc-rezound/
Hell yeah man good job!
Sweet!! I wanted to make a boot animation for my phone.
Thanks
FPS?
First of all great guide, and congrats on making the first page. I was wondering if there was any way to increase the FPS (im trying to increase it to 25) of the boot animation, I've noticed that anytime I change it in boot animation creator, my animation doesn't work anymore. If I can't change it in the boot animation creator, what would be the best way to speed up the frames a bit? Thanks in advance.
xarmorx said:
First of all great guide, and congrats on making the first page. I was wondering if there was any way to increase the FPS (im trying to increase it to 25) of the boot animation, I've noticed that anytime I change it in boot animation creator, my animation doesn't work anymore. If I can't change it in the boot animation creator, what would be the best way to speed up the frames a bit? Thanks in advance.
Click to expand...
Click to collapse
First of all thank you OP for this walkthrough. I have a Vivid and haven't been able to get bootsounds to work. With a little guidance from post 2, we have bootsound!
Xarmox - In all the animations I've ever made, there should be a desc.txt in your animation's .zip, along with the image folders. In this .txt file, the first line will display "width height framespersecond". You should be able to speed it up/slow it down by editing the fps
Also to OP and anyone else who might be interested - if you leave off the audiostart="folder", it will just start the sound at the beginning of the animation, rather than looking for a specific folder name. This would allow other animations that don't use the same folder structure to utilize the sound. However if you only want your sound to start at a specific roll of images, this is a great addition!
homeslice976 said:
Xarmox - In all the animations I've ever made, there should be a desc.txt in your animation's .zip, along with the image folders. In this .txt file, the first line will display "width height framespersecond". You should be able to speed it up/slow it down by editing the fps
Click to expand...
Click to collapse
thank you for the advice, the problem I'm having is that anytime i change the FPS in the desc.txt or in the boot animation program, my boot animation doesn't play on my phone when i boot up, it just shows the splash screen until the phone boots up. Its as if the ReZound won't play any boot animation unless its at 15 FPS.
I tried deleting every other image in the VZW folder and renamed them (I think this would give the appearance of ~30 FPS, when played at 15FPS), which isn't the preferred way, because its gonna make syncing up the sound that much more difficult. Maybe I could figure out a good pattern of frames to delete to give the appearance of 25 FPS.
xarmorx said:
thank you for the advice, the problem I'm having is that anytime i change the FPS in the desc.txt or in the boot animation program, my boot animation doesn't play on my phone when i boot up, it just shows the splash screen until the phone boots up. Its as if the ReZound won't play any boot animation unless its at 15 FPS.
I tried deleting every other image in the VZW folder and renamed them (I think this would give the appearance of ~30 FPS, when played at 15FPS), which isn't the preferred way, because its gonna make syncing up the sound that much more difficult. Maybe I could figure out a good pattern of frames to delete to give the appearance of 25 FPS.
Click to expand...
Click to collapse
Don't know if it would matter or not, but are you putting the edited desc.txt back with Store compression (file size and compressed size the same)? I use WinRAR to do this as it allows me to select compression level every time, but have to use 7zip for a lot of the other things I do that don't require Store compression, it seems to just know
Edit: Keep in mind I'm saying this without ever having played with a bootanimation for a Rezound. I have a buddy with one, if you're still having trouble I'll put one on his and see what I can do next time I see him. Or maybe OP can chime in with some knowledge
I am a Noob on Xda-Developers. Please forgive me for my English.
The Android boot animation is stored within one very special file named bootanimation.zip inside the phone’s memory. Change the .zip, change the animation. It’s as simple as that.
What’s not simple is how Android stores bootanimation.zip. For some unknown reason, Android actually keeps two copies of the animation file. One is stored at /data/local and the other at /system/media.
The difference between these locations is minor. The /data/local copy does not require root access. The phone also uses this animation before the other. The other one in /system/media does require root. However, installing a new animation to /system/media means that it will survive a factory reset. It’s a trade-off.
Regardless of which location you decide to use for your new boot animation, be absolutely sure to back up the original files. When replacing bootanimation.zip, keep a copy of the original .zip file saved to your computer. To be absolutely sure, you may want to make a Nandroid backup before doing any modifications.
How It Works
This section is intended to inform those who might wish to make their own start-up animation. If you have no interest in doing so, feel free to skip ahead. Understanding exactly how bootanimation.zip works is not necessary to install a new one.
If you copy bootanimation.zip to your computer and unzip it, inside will be a collection of files. There will be folders labeled part0, part1, part2 and so on. Also included will be desc.txt.
For our MIUI ROM, the boot animation was split into two parts. Part 0 had a huge list of image files which it used for the animation. Part 1 simply held the final screen at the end of the animation.
Desc.txt contains extremely simple instructions telling the phone how to run the animation. The first line lists the width, height, and frame rate of the animation. So 480 800 24 means to run the animation at 480×800 resolution and 24 frames per second.
The next two lines refer to the animation files. “P” invokes a part folder. The next number tells the phone how many times to play that part of the animation. So our second line “p 1 0 part0” means that the animation files in the part0 folder will play once. If we put zero, then the animation will loop until fully booted. The most notable use of looping animations is CyanogenMod 7’s spinning blue arrow.
The second number in that line is the pause time. This tells the phone how long it should pause DURING/BEFORE/AFTER/ the animation. Pause time is measured in frames, so 24 would be 24 frames of pause at 24 frames per second. Thus it pauses for one second. Our 0 means the phone pauses for zero frames (no time).
Creating Your Own Boot Animation
The first step is drawing the animation. Create a series of images which form one continuous animation. The frames must be labeled by increasing numbers, e.g. 000.png and 001.png and so on. Each part of the animation goes into a separate folder, starting with part0 and part1 and so on.
Finally open Notepad and write out a few lines of instructions. The first line should be the resolution and frame rate of the animation. The resolution must match that of your device. If you don’t know what that resolution is, see this page . The frame rate should match the one in the original desc.txt.
The next lines dictate the parts. Each part folder requires one line of instruction. Write out the numbers for each part of the animation. Once finished, save the file as desc.txt.
The final step is creating the .zip file. Select all the part folders and desc.txt. Right click on the files and select Send To > Compressed folder(Make sure that you select Store on Compression level). Windows should quickly create the new file. Be sure to name it bootanimation.zip and nothing else.
Various Methods of Changing the Boot Animation:
Installation by Flashing
Other themes come as .zip files which can be flashed within ClockworkMod. This is much easier and definitely recommended. When downloading a theme from XDA or elsewhere, be sure to check the page. It might be a flashable .zip.
To flash a .zip file, simply copy it to the SD card.
Reboot into recovery mode.
Now go to “Install .zip” and choose the file from your card. CWM should run the file.
Reboot once finished.
Installation by Copy/Paste
Copy your corresponding zip into your memory card.
Go to system/media & make a backup of bootanimation.zip.
Then copy your new bootanimation.zip from sd card & paste it to system/media.
Change permission to: rw-r-r
Reboot & enjoy
To change the boot audio:
Find an mp3. It should be relatively short as most phones don’t take much time to turn on.
Rename the mp3 to bootaudio.mp3.
Copy it to the SD card.
Now open Super Manager and copy the mp3 to /system/media.
Always make a Backup before doing any modifications
Try it with your own risk
I am not responsible it anything wrong happen with your mobile.
Donr forget to press THANKS button
I made a simple boot animation for my LS991 and it previews flawlessly in Boot Animation Factory, but I can't seem to get it to work on my phone. I found the carrier/cust boot animation and tried to replace that, but my file explorer is failing to copy the zip over to it. So I tried in system/media and replaced both the default boot animation and the bootanimation_sprint files. Now the screen just starts up with the typical LG - Powered by Android, then goes black for a bit, and then the OS loads up.
I'm not sure if I'm putting my custom animation in the wrong spot or what. The permissions are set to rw-r-r as per this thread, but still nothing.
I'm attaching the boot animation to this post if anyone wants to take a look at it and make sure I've got everything done right. When I zipped it with 7zip, I made sure to set compression method to "store". Thanks for looking at this.