Graphing calculator - Android Q&A, Help & Troubleshooting

Im looking for an app either Paid or free APP
Wherein i can input equations like
3x + 4y +3 = 0
Where i can input not one but two variables
All i could find is apps which can take only 1 variable :/
Any help please
Science Graduate in need of help

Qwerty123 \m/ said:
Im looking for an app either Paid or free APP
Wherein i can input equations like
3x + 4y +3 = 0
Where i can input not one but two variables
All i could find is apps which can take only 1 variable :/
Any help please
Science Graduate in need of help
Click to expand...
Click to collapse
graphing calculator i used in high school only accepted one variable. Couldn't you change the equation so that it was y = 3/4x + 3/4 and graph that? sorry if i didn't help.

Related

[Q] Calculator app

This may sound a little trivial to some people, but the percentage sign on the calculator app seems to work differently to many standard calcutors I've used before e.g. on a standard calculator enter:
10*17.5%+ (would give 11.75 correct).
some other calculators you could even use 10+17.5% would also give the correct answer, but using HD2 app using:
10*17.5%+= (gives an error)
10*17.5%= (gives 1.75 correct, but you then have to +10 to get the full answer which is not good if your starting figure is not an easy number like 10 )
10+17.5%= (gives the wrong answer)
Sorry for the moan.
we've had this discussion before. I assume you are flipping the phone to landscape to get the % symbol, right? and i assume the wrong answer you are getting is 1.75?
In portrait mode the calculator acts like a business calculator, , in landscape it acts like a scientific calculator.
All scientific calculators would give 1.75 because what it is seeing is
10 x (1/100 x 17.5) ((mathematically, 17.5% is the same as saying 1/100x17.5, or 17.5/100)
= 10 x (0.01 x 17.5)
= 10 x 0.175
= 1.75
To do the sum you are doing in portrait, (adding VAT, are you?) use 10 x 1.175
to remove vat do 10 / 1.175
To do it in landscape, as you discovered, you would use 10+10x17.5% (personally I would use 10+(10x17.5%) for clarity, but thats just habit)
10+10x17.5% reads as "Ten plus 17.5 percent of ten"
Heres another one for you , , in portrait mode, type ' 2 + 3 x 4' answer 20
now do teh same sum in landscape mode, , , , , answer 14!, , , good eh?
Its because a scientific calculator follows mathematical rules that mean multiplication is perfiormed before addition, which is why in maths you would put (2+3)x4 to get 20, whereas a business calculator calculates as you go, so when you press the x it adds 2+3 automatically.
Many thanks for your reply.
I totally understand all the forumulas but it just seems a long way round to get a simple percentage, especially when compared to using a normal calculator such as a Casio.
hehe, yeap, and if there was a % button in portrait mode, it would probably work like you expected, sadly there isn't.
Hi there,
Can anyone pls tell me if there is any financial calculator for HD2. Many thanks in advance.

[Tweaks] - Adjustments build.prop [11/09/2011]

The time changes in build.prop walk testing, here are some improvements ...
They can also be applied to stock roms!
The optimization can vary from one device to another (I believe)! : Confused:
Be careful not to duplicate lines!
If you do not have the line, you can add it to end!
For the changes you need a file manager (with root access)
How: Go to System / build.prop build.prop and open with text editor and add (if not already) or change for better results!
Just made ​​the changes save and exit and restart the machine!
Note: I am not responsible for killing your phone! Use at your own risk! It is indicated by guarantee having a backup!
1. Increase to 100% quality JPG
Code:
ro.media.enc.jpeg.quality = 100
2. render UI for GPU
Code:
debug.sf.hw = 1
3. Decrease delay dial
Code:
ro.telephony.call_ring.delay = 0
4. Help answer scroll (higher the value, the answer scroll!)
Code:
windowsmgr.max_events_per_sec = 150
5. battery Save
Code:
wifi.supplicant_scan_interval = 150
pm.sleep_mode = 1
ro.ril.disable.power.collapse = 1
6. Disable debugging notification icon in the status bar
Code:
persist.adb.notify = 0
7. Increase the overall touch response
Code:
debug.performance.tuning = 1
video.accelerate.hw = 1
8. Signal (3G) tweaks
Code:
ro.ril.hsxpa = 2
ro.ril.gprsclass = 10
ro.ril.hep = 1
ro.ril.enable.dtm = 1
ro.ril.hsdpa.category = 10
ro.ril.enable.a53 = 1
ro.ril.enable.3g.prefix = 1
ro.ril.htcmaskw1.bitmask = 4294967295
ro.ril.htcmaskw1 = 14449
ro.ril.hsupa.category = 5
9. Net speed settings
Code:
net.tcp.buffersize.default = 4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi = 4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts = 4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs = 4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge = 4096,87380,256960,4096,16384,256960
10. Disable the animation to boot faster startup
Code:
debug.sf.nobootanimation = 1
11. Phone will not wake up by pressing the volume
Code:
ro.config.hwfeature_wakeupkey = 0
12. enable JIT
Code:
dalvik.vm.execution-mode=int:jit
13. disable JIT
Code:
dalvik.vm.execution-mode=int:fast
14. enables lockscreen to unlock menu button (true = false = enable and disable)
Code:
ro.config.hw_menu_unlockscreen = false
15. disable black screen after a call
Code:
ro.lge.proximity.delay = 25
mot.proximity.delay = 25
16. Fix some application issues
Code:
ro.kernel.android.checkjni=0
17. Photos and videos with the recording quality
Code:
ro.media.dec.jpeg.memcap = 8000000
ro.media.enc.hprof.vid.bps = 8000000
There are some other tweaks, so far posted only tested by me! If anyone has any better or any setting is only post I will be making additions and changes! Enjoy!
Credits Jazux Knzo and the same!
Thanks
Sorry for poor English!
Nice work that you got them all together! /sarcasm
To bad you did not link to the original topic and give proper credits for the man that searched for hours and hours to make a complete list
Sent from my Optimus 2X using xda premium
owain94 said:
Nice work that you got them all together! /sarcasm
To bad you did not link to the original topic and give proper credits for the man that searched for hours and hours to make a complete list
Sent from my Optimus 2X using xda premium
Click to expand...
Click to collapse
Yes, nice work. I don't care about the original link as long as this particular one is the one that helps ME.
So thanks, this was helpful!
owain94 said:
Nice work that you got them all together! /sarcasm
To bad you did not link to the original topic and give proper credits for the man that searched for hours and hours to make a complete list
Sent from my Optimus 2X using xda premium
Click to expand...
Click to collapse
Ok! As the credits!
They were not taken from only one site.
Owain shut up, because the ones like you people dont want to develop for minis and you will scare away another dev/programer
Sent from my U20i using XDA Premium App
Driveskull said:
Owain shut up, because the ones like you people dont want to develop for minis and you will scare away another dev/programer
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Ehhm excuse me?
Chill out man you don't know me
And I don't scare him away
I just told the man to give proper credits
the tweaks he post are nice tweaks...
But it is nice to see some credits
Gustavo RD78 said:
Ok! As the credits!
They were not taken from only one site,
sorry, it was not my intention!
Click to expand...
Click to collapse
No need to sorry was just saying you know
Sent from my Optimus 2X using xda premium
Nice to see Owen94 around in mini forum .. he was the most exiting developer for mini .. newbies should think before commenting on recognized developers like him...
Sent from my X10mini using XDA App
anything from this topic has effect on miniCM7 2.1.1 with new kernel?
llava said:
anything from this topic has effect on miniCM7 2.1.1 with new kernel?
Click to expand...
Click to collapse
Yes, I did several tests and all those who tried were successful!
But you can guarantee to keep a backup ... : P
Hi!
I want to change the audio bitrate in video recording.
possible to make code for this or no?
ES File Exlorer FORCE CLOSES
I tried except 4,6,10,11,12,13,14,15 and then my ES file explorer got this problem. It won't open and prompt force close

Colour Name From RGB values

Hey Guys,
Im a final year software engineering student at staffordshire university. For my final project im making a colour identification android application for colour blinded people. Till now I know how to get the RGBA values from a particular pixel area. But guys how can i convert those values in to certain colour name so i can give it back to the user in voice+text. Please help.. im kinda stuck in getting the colour name from the RGB values
thanks
Hi, I'm not aware of any lib that will convert RGB to text, but you can build your own ! First of all, you must pick up a color 'threshold'. RGBs goes 0-255,0-255,0-255 so there are 256^3 possible colors to map... hmmm I think too many
What if we approx the colors dividing each 256 in a 4 group (threshold = 85) ? We would then have just 64 colors to map (4^3) that would be much easier to manually map the colors to names .
Then take your RGB value and approximate it to the upper (or lower) class and check it against your brand new array composed by RGB approxed values, and extraxt its name
ex.
Code:
0-0-0 = Black
0-0-85 = Very dark blue
0-0-170 = Dark blue
0-0-255 = Blue
0-85-0 = Rotten Green
0-85-85 = Water
0-85-170 = Poisoned water
0-85-255 = Azure
0-170-0 = Light green
0-170-85 = colorName
0-170-170 = colorName
0-170-255 = colorName
0-255-0 = colorName
0-255-85 = colorName
0-255-170 = colorName
0-255-255 = colorName
85-0-0 = colorName
I made you this PHP script that might help you in choosing the correct threshold (that will affect the overall accuracy of your color recognition) and give a name to the color. Just change the $th = value .
PHP:
<?php
// Color threshold
$th = 85;
$count = 0;
for ($i=0; $i<=255; $i= $i+$th) {
for ($j=0; $j<=255; $j= $j+$th) {
for ($k=0; $k<=255; $k= $k+$th) {
echo $i . '-' . $j . '-' . $k . '</br>';
echo '<div style="width:50px; height:50px; background:rgb('.$i.','.$j.','.$k.');"></div>';
$count++;
}
}
}
echo "Total colors: ".$count;
?>
Good luck, if you got lost in my words, feel free to ask me for light !
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
Click to expand...
Click to collapse
Isn't the development section for asking development related questions? Who trawls the Q&A section for development help? I certainly wont go looking there for development related material since the section this was posted in clearly says "Development". Worldwide, Q&A != R&D, Q&A = "eh? where does my battery plug in?"
To answer the question, I found this little gem: Set RGB color codes for android and RGB color look up table
The easiest way would be to use a table like that the as some sort of look up table. Try and mirror .net's Color.GetKnownColor(int r,int g, int b) method. Browse around the mono code for an idea how how you can implement this. Read the pixel, then try and match the rgb values with your table. Good luck
Aww thanks <3 hey you have any idea about colour tracking also in android
princessDroid3 said:
Aww thanks <3 hey you have any idea about colour tracking also in android
Click to expand...
Click to collapse
You mean something like this blob tracker?
ell3 said:
You mean something like this blob tracker?
Click to expand...
Click to collapse
well can I change the blob to detect only squares

Graphing calculator Graphing calculator Graphing calculator

Im looking for an app either Paid or free APP
Wherein i can input equations like
3x + 4y +3 = 0
Where i can input not one but two variables
All i could find is apps which can take only 1 variable :/
Any help please
Science Graduate in need of help
I guess you're looking for Multi equation Solver !
but its not free Application.
https://market.android.com/details?id=com.example2.MatrixCalcRR&hl=en
Why do you need it on your phone? Not able to use your pc or a graphical calculator (like TI-84)

SDK or NDK w/o OpenGL in app to save battery?

I would like to develop and app, which has the main functionality to show a 2D chart. There are others and settings, but this is the main.
Existing similar applications aren't using technologies as how it should and they are releasing apps with to few features or they are draining battery like crazy. This I would like to improve it.
This is for web / desktop
View attachment 2397770
Here are a few sentences from my experience, please correct me if I am wrong!
Many-many of implementations are using SDK and 2D graphics. They draw the whole screen every time. Just sere how your battery drained in 1-2 hours! - some really bad implementation they can drain in 3 minutes, I will show later. One exception is: Metatrader 4: it use NDK and OpenGL, Hey pay me, because I am advertising you!
I think the SDK code (.class files) it need to e compiled at runtime execution by virtual machine, which takes CPU usage.
NDK is compiled only one => will use less CPU => will drain less batter as the SDK version.
If this is correct, than it should move more code to NDK if is possible. Not sure about JNI calls overhead!
NDK huuuuge advantage: it will allow to use the phone max available memory ( 1.5GB was last time) instead of SDK max allowed value: 256MB ( in my case, but some devices allow only 24Mb for SDK apps)
If you don't touch this chart than nothing changes, if you set the "Live" option, than the last "candle" will change. The candles are those Red & Green rectangles with the line in upper side and down side with meaning of the open, high, low, close prices. - it is related to business logic, but this special bars can have those 2 lines, which are important. The border of the 1pixel black around the red-green rectangles are for visual effects only. To save battery can be omitted.
(The background text and logos are just for advertisements, nobody cares, not really needed for the user for his actions)
As you can see there is a toolbar, and there are maybe other components too, but when the user want to see highest amount of data than will rotate to landscape and there should be given a Full Screen (in portrait not by default)
I have started the development with a component for rendering with OpenGL ES 2.0.
The UI is in SDK , the renderer there is called, but the method implementation calls the native methods via JNI. The business logic, rendering implementation are all in NDK, which is a native shared library.
Not sure why I started with OpenGL, to have some cool effects, who want to drain his battery faster? or I tough if is faster than will consume less battery? - maybe faster drains, but more: 100 mA from GPU for 0.01 seconds rendering is the same as 10 mA for 0.1 rendering at CPU.
Here I am not sure if I am saving energy. Tell me your opinion!
So I have started learning OpenGL ES 2.0 and all what I saw in tutorials it was triangle triangle triangle, but in this chart there is no triangle, but rectangle, or rectangle+lines or just lines with set width or many triangles?
Here is a cool candle, I would like to see this, but I know the gradients will burn battery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is a bit magnified and you can see how I am thinking:
but can't decide. Because I haven't enough experience, don't know the benchmark results. I would like to see a tear down and expected results:
GL_Lines + glLineWidth
GL_triangles
GL_triangle_strip
As the first option with GL_lines:
A candle would be 1x small line from the Low and High price drawn first. Lets say with 5 pixel width to have room for gradient too, if needed. In worse case only 1 pixel, as how they are using others now.
The candle body: the red/green rectangle with has the info of Open/Close price can be another GL_Lines with 50 pixel width - for example.
Will be gradient or not that would depends on user settings. Not sure how is possible to draw black 1-2 pixel of border for candle body in this case - if the user has that settings.
Seconds option with triangles:
2x triangle can make a square.
There is a square as the small line and there is another one the larger square : the candle body.
The triangle strip case:
if only one GL_triangle_strip:
bottomline: 4 vertices
body other 4
upper line 4 vertices
or small line 4x vertices
+
other 4x vertices , so 2x GL_triangle_strip
I made this:
The first thing it was:
Code:
setRenderMode(GLSurfaceView.RENDERMODE_WHEN_DIRTY)
It is a rectangle with 2x triangle and a line with width.
The line has less vertices of course, but in this chart is expected to have 50- 200 bars maximum. Minimum 10-20.
What is needed is that cross at mouse location: that dashed line and the numbers ( price ) on the right and some other texts in bottom. X, Y coordinates in text.
Please post your experience, benchmarks, opinion.
Hi matheszabi,
ok, your question was rather compheresive . So right way to find solution is rather complicated too.
I woudn't choose solution according to differences between JDK / NDK to same function calls of OpenGL ES 2.0
According to my experience, performance (and power consumption) is almost the same.
GLOBAL aproach: I suggest
1) you create your application in Java - use JDK versions - creating native function for just few draw calls is, imho, hard compared what you get
2) if your application is NativeActivity
- use direct calls - be prepared for differences between devices, proper creation of surface, .... but it's faster
- subclass Native Activity and use JAVA as well
3) not using OpenGL ES directly at all - i suggest trying layout and buttons / images inside of it, i saw 200 control buttons on 1 screen and it ran perfectly. And layout is movable by 1 command - offset. I suppose, this is completely written in native code anyway. You just get drawing interface in JAVA.
Now, to OPENGL ES itself (JAVA or NDK)
cons:
- OPENGL is 3D interface so pixel perfect drawing is something which is not supported by itself. (note: opengl has pixel / texel center at 0.5 not at 0.0/1.0)
- you need pixel perfect draw - boxes you draw must be perfectly aligned to screen pixels - othewise you get blurry results
- you might not need texturing - thats PLUS, otherwise drawing pixel perfect opengl suraces is "pain in the ..." - viz. texel interpolation and drawing a pixel checker aligned with screen pixels is real nightmare and it differs on each device (I tried )
- pixel perfect with mipmaps - awful again
- alpha blending (when you have something which is transparent) - you will need sorting to draw it properly
- will you need font ? oh my ...
- NO EMULATOR - will need to test each device if it's working properly (not every, at least each vendor)
to consider:
writing vertex/fragment shader in a world with 3500 (number of opengles 2.0 devices according google) suitable devices/compilers/android versions ... ehm
pluses:
- you draw exactly what you want
- use of fragment shader (alhough i suggest using gradient textures instead)
- i suggest draw primitives in vertex buffers (indexed triangles or triangle strips). Not one box by one - compose all in one array and draw it by one draw call. Doubling points in strips can help you
- instancing is not supported) but there is way surpassing this (preparing buffers with)
- i don't recommend using lines with width definition - each implementation draws this differently - and it's equal to drawing lit cylinder
- in native activity loop - handling if you need redraw - it's difficult
I would try normal android GUI first
pluses:
- you get pixel perfect draw, with / without bitmaps, images, gradients ....
- i suppose its fast enough
- no sorting needed
- redraws will be invoked when something changes
- translation / clipping will be handled internally
- no need to care about device !!! that's big plus
cons:
- zoom will be problematic
- rotations as well (but i suppose you don't need them)
note to power consupmption - both OpenGL :
just swaping screen buffers 30 per sec will deplete most of devices within 2-3 hours. But of course, doing it so only when needed is doable
But I might be wrong so best way is to decide by yourself and, of course, try it and see.
If you have qustions about drawing through ES, i'll post some samples of pixel perfect draw (from my gui)
Good luck, post your decision, and if you have some results, post them too! will be very interesting.
PS.
Petr Sovis said:
Hi matheszabi,
ok, your question was rather compheresive . So right way to find solution is rather complicated too.
I woudn't choose solution according to differences between JDK / NDK to same function calls of OpenGL ES 2.0
According to my experience, performance (and power consumption) is almost the same.
GLOBAL aproach: I suggest
1) you create your application in Java - use JDK versions - creating native function for just few draw calls is, imho, hard compared what you get
2) if your application is NativeActivity
- use direct calls - be prepared for differences between devices, proper creation of surface, .... but it's faster
- subclass Native Activity and use JAVA as well
3) not using OpenGL ES directly at all - i suggest trying layout and buttons / images inside of it, i saw 200 control buttons on 1 screen and it ran perfectly. And layout is movable by 1 command - offset. I suppose, this is completely written in native code anyway. You just get drawing interface in JAVA.
Now, to OPENGL ES itself (JAVA or NDK)
cons:
- OPENGL is 3D interface so pixel perfect drawing is something which is not supported by itself. (note: opengl has pixel / texel center at 0.5 not at 0.0/1.0)
- you need pixel perfect draw - boxes you draw must be perfectly aligned to screen pixels - othewise you get blurry results
- you might not need texturing - thats PLUS, otherwise drawing pixel perfect opengl suraces is "pain in the ..." - viz. texel interpolation and drawing a pixel checker aligned with screen pixels is real nightmare and it differs on each device (I tried )
- pixel perfect with mipmaps - awful again
- alpha blending (when you have something which is transparent) - you will need sorting to draw it properly
- will you need font ? oh my ...
- NO EMULATOR - will need to test each device if it's working properly (not every, at least each vendor)
to consider:
writing vertex/fragment shader in a world with 3500 (number of opengles 2.0 devices according google) suitable devices/compilers/android versions ... ehm
pluses:
- you draw exactly what you want
- use of fragment shader (alhough i suggest using gradient textures instead)
- i suggest draw primitives in vertex buffers (indexed triangles or triangle strips). Not one box by one - compose all in one array and draw it by one draw call. Doubling points in strips can help you
- instancing is not supported) but there is way surpassing this (preparing buffers with)
- i don't recommend using lines with width definition - each implementation draws this differently - and it's equal to drawing lit cylinder
- in native activity loop - handling if you need redraw - it's difficult
I would try normal android GUI first
pluses:
- you get pixel perfect draw, with / without bitmaps, images, gradients ....
- i suppose its fast enough
- no sorting needed
- redraws will be invoked when something changes
- translation / clipping will be handled internally
- no need to care about device !!! that's big plus
cons:
- zoom will be problematic
- rotations as well (but i suppose you don't need them)
note to power consupmption - both OpenGL :
just swaping screen buffers 30 per sec will deplete most of devices within 2-3 hours. But of course, doing it so only when needed is doable
But I might be wrong so best way is to decide by yourself and, of course, try it and see.
If you have qustions about drawing through ES, i'll post some samples of pixel perfect draw (from my gui)
Good luck, post your decision, and if you have some results, post them too! will be very interesting.
PS.
Click to expand...
Click to collapse
Hello thanks for sharing your idea experience.
I have asked in other forum a similar question.
It was a response than the GPU has optimised methods so it will have less power consumption
Also he likes to draw the whole frame not only a part - I'm case of my optimisation
Also I have asked an opengl expert and he told me to use the ortho instead of perspective projection. He has right.
Now I don't have bliry results anymore but is pixel perfect!
For benchmark I made 100 candles : 100 line + 200 triangles.
I have calculated how much is the wigth and the height for the surface => how much space can have a candle and used the matrix transformations and render it.
A nice surprise the fist time it took 18 milliseconds but after that only took 5-6 millisec the. Sdk->ndk->opengl-> SDK steps.
That is very good result on MY trash device. But I think it has a trick: the ndk gives order to render to GPU and it will return. So in those 5-6 milliseconds will start to work the GPU for who knows how much....
Note: audio , video , sensor intensive projects should be developed on real devices not at emulators.
With my method the problem is starting with text drawing and leak of knowledge.
Vbo or texture... Not sure which one but if a native 2D can do it than I can me too.
Cairo as rendering 2d engine is a bit big to include in android.
I still think the ndk is the correct place. Also is isn't so easy to watch the engine code as a decompiled SDK code
Ok! you chose your path - good for you!
18/5-6 ms is just for draw (200 triangles+100 lines) ?, or whole frame time ? Can you tell me the the device you are testing your app on ?
Note: Ortho, i didn't mean to advice perspective transform, ortho is still 3d, and pixel perfect - wait for texturing/text drawing, but you'll manage!
Just few tips to font rendering:
bitmap fonts: I can't add links so google: angelcode bmfont
font bitmap creator: google: angelcode bmfont
+ sample: google: nehe 2d_texture_font
freetype implementation - it's possible to compile it with ndk - i use it and it's simple
google: freetype
and code for starters: google: nehe freetype_fonts_in_opengl
Cheers
P.
Petr Sovis said:
Ok! you chose your path - good for you!
18/5-6 ms is just for draw (200 triangles+100 lines) ?, or whole frame time ? Can you tell me the the device you are testing your app on ?
Note: Ortho, i didn't mean to advice perspective transform, ortho is still 3d, and pixel perfect - wait for texturing/text drawing, but you'll manage!
Just few tips to font rendering:
bitmap fonts: I can't add links so google: angelcode bmfont
font bitmap creator: google: angelcode bmfont
+ sample: google: nehe 2d_texture_font
freetype implementation - it's possible to compile it with ndk - i use it and it's simple
google: freetype
and code for starters: google: nehe freetype_fonts_in_opengl
Cheers
P.
Click to expand...
Click to collapse
My phone is a THL W8S. has FHD resolution
It had a mixed layout, but better I show you:
I have misscalculated the lines positions but for now doesn't matter.
The GLSurface takes a considerable amount of the screen space and that is counted.
On a Samsung Note 10" - at least 1 year old device, lower resolution, but better CPU + GPU it is a lot less this numbers.
My device is a trash (by far not for gamming), I told you:
Hi,
ok, as I understand, the time is just for drawing 200 tris + 100 lines - ok that seems a "little to much" for that.
Besides, your device is not trash at all
I don't know if I can share my examples - but scene from app I released week ago draws 50KTris per frame with some heavy shaders (normal mapping + specular ligting from 2 light sources) and draws text over it + particles + GUI (my ndk gles2.0 engine) and I suppose it will run over 30 FPS on your device (its PoverVR 540 or something) (google play: "Asteroid Hunters" by me)
So, can you post fragment of your drawing code ? maybe there something not really right ?
P
Petr Sovis said:
So, can you post fragment of your drawing code ? maybe there something not really right ?
P
Click to expand...
Click to collapse
I will post, but for me this is good enough others are drawing in 200-2000 milliseconds
The SDK part:
Code:
@Override
public void onDrawFrame(GL10 gl) {
long start = System.currentTimeMillis();
LibJNIWrapper.rendererOnDrawFrame();
long end = System.currentTimeMillis();
//Log.e("Renderer", "onDrawFrame() took: "+ (end-start)+" millisec (1e-6)");
}
The related NDK part:
Code:
void renderer_on_draw_frame() //4
{
LOGE("renderer_on_draw_frame");
//copy
static float grey;
grey += 0.01f;
if (grey > 1.0f) {
grey = 0.0f;
}
glClearColor(grey, grey, grey, 1.0f);
checkGlError("glClearColor");
glClear(GL_DEPTH_BUFFER_BIT | GL_COLOR_BUFFER_BIT);
checkGlError("glClear");
int i;
for (i = 0; i < CANDLES_COUNT; i++) {
//LOGE("chartengine rendering i= %d",i);
renderLine((candles[i].coloredSingleLine));
renderRectangle((candles[i].coloredSingleRectangle));
}
glFlush();
}
line rendering:
Code:
void renderLine(ColoredSingleLine* pColoredSingleLine) {
if (pColoredSingleLine == NULL) {
return;
}
//matrixTranslateM(mvpMatrix, rndX, rndY, 0);
//LOGE("###renderLine pColoredSingleLine %p\n",pColoredSingleLine);
glUseProgram(pColoredSingleLine->programColoredLine.program);
checkGlError("Line: glUseProgram");
// Enable a handle to the triangle vertices
glEnableVertexAttribArray(pColoredSingleLine->programColoredLine.a_position_location);
checkGlError("Line: glEnableVertexAttribArray");
// Prepare the triangle coordinate data
glVertexAttribPointer(pColoredSingleLine->programColoredLine.a_position_location, pColoredSingleLine->lineData.COORDS_PER_VERTEX_LINE, GL_FLOAT, GL_FALSE,
pColoredSingleLine->lineData.vertexStride, pColoredSingleLine->lineData.vertices);
checkGlError("Line: glVertexAttribPointer");
// Set color for drawing the triangles
glUniform4fv(pColoredSingleLine->programColoredLine.u_color_location, 1, pColoredSingleLine->lineData.color_rgba);
checkGlError("Line: glUniform4fv");
// Apply the projection and view transformation
glUniformMatrix4fv(pColoredSingleLine->programColoredLine.u_mvp_matrix_location, 1, GL_FALSE, pColoredSingleLine->lineData.mvpMatrix);
checkGlError("Line: glUniformMatrix4fv");
glLineWidth(pColoredSingleLine->lineData.lineWidth);
// Draw the line
glDrawArrays(GL_LINES, 0, pColoredSingleLine->lineData.vertexCount); // (GLenum mode, GLint first, GLsizei count);
checkGlError("Line: glDrawArrays"); // GL_INVALID_ENUM
//GL_INVALID_ENUM is generated if mode is not an accepted value.
//GL_INVALID_ENUM is generated if type is not GL_UNSIGNED_BYTE or GL_UNSIGNED_SHORT.
GLint error = glGetError();
if (error == GL_OUT_OF_MEMORY) {
LOGE("Out of Video memory error...congrats...is your device a stone ?");
}
// Disable vertex array
glDisableVertexAttribArray(pColoredSingleLine->programColoredLine.a_position_location);
}
and the rectangle:
Code:
void renderRectangle(ColoredSingleRectangle* pColoredSingleRectangle) {
if (pColoredSingleRectangle == NULL) {
return;
}
//matrixTranslateM(mvpMatrix, rndX, rndY, 0);
glUseProgram(pColoredSingleRectangle->programColoredRectangle.program);
checkGlError("Rectangle: glUseProgram");
// Enable a handle to the triangle vertices
glEnableVertexAttribArray(pColoredSingleRectangle->programColoredRectangle.a_position_location);
checkGlError("Rectangle: glEnableVertexAttribArray");
// Prepare the triangle coordinate data
glVertexAttribPointer(pColoredSingleRectangle->programColoredRectangle.a_position_location, pColoredSingleRectangle->rectangleData.COORDS_PER_VERTEX_RECTANGLE, GL_FLOAT, GL_FALSE,
pColoredSingleRectangle->rectangleData.vertexStride, pColoredSingleRectangle->rectangleData.vertices);
checkGlError("Rectangle: glVertexAttribPointer");
// Set color for drawing the triangles
glUniform4fv(pColoredSingleRectangle->programColoredRectangle.u_color_location, 1, pColoredSingleRectangle->rectangleData.color_rgba);
checkGlError("Rectangle: glUniform4fv");
// Apply the projection and view transformation
glUniformMatrix4fv(pColoredSingleRectangle->programColoredRectangle.u_mvp_matrix_location, 1, GL_FALSE, pColoredSingleRectangle->rectangleData.mvpMatrix);
checkGlError("Rectangle: glUniformMatrix4fv");
// Draw the square
glDrawElements(GL_TRIANGLES, NELEMS(pColoredSingleRectangle->rectangleData.drawOrder), GL_UNSIGNED_SHORT, pColoredSingleRectangle->rectangleData.drawOrder); // GL_INVALID_ENUM on Galaxy note
checkGlError("Rectangle: glDrawElements"); // GL_INVALID_ENUM
//GL_INVALID_ENUM is generated if mode is not an accepted value.
//GL_INVALID_ENUM is generated if type is not GL_UNSIGNED_BYTE or GL_UNSIGNED_SHORT.
GLint error = glGetError();
if (error == GL_OUT_OF_MEMORY) {
LOGE("Out of Video memory error...congrats...is your device a stone ?");
}
// Disable vertex array
glDisableVertexAttribArray(pColoredSingleRectangle->programColoredRectangle.a_position_location);
}
At any benchmarks my fps is bellow 12, while other devices has 30 or 50 fps. Believe me not my device has the best CPU + GPU by far:
some output from on old code:
Code:
printGLString("Version", GL_VERSION);
printGLString("Vendor", GL_VENDOR);
printGLString("Renderer", GL_RENDERER);
printGLString("Extensions", GL_EXTENSIONS);
....
void printGLString(const char *name, GLenum s) {
const char *v = (const char *) glGetString(s);
LOGE("GL %s = %s\n", name, v);
}
// ### GT-N8000 ### Galaxy note 10" - GL Renderer = Mali-400 MP
// GL_EXT_debug_marker
// GL_OES_texture_npot
// GL_OES_compressed_ETC1_RGB8_texture
// GL_OES_standard_derivatives
// GL_OES_EGL_image
// GL_OES_depth24
// GL_ARM_rgba8
// GL_ARM_mali_shader_binary
// GL_OES_depth_texture
// GL_OES_packed_depth_stencil
// GL_EXT_texture_format_BGRA8888
// GL_EXT_blend_minmax
// GL_OES_EGL_image_external
// GL_OES_EGL_sync
// GL_OES_rgb8_rgba8
// GL_EXT_multisampled_render_to_texture
// GL_EXT_discard_framebuffer
// ### THL V8S - GL Renderer = PowerVR SGX 544MP
// GL_EXT_debug_marker
// GL_OES_rgb8_rgba8
// GL_OES_depth24
// GL_OES_vertex_half_float
// GL_OES_texture_float
// GL_OES_texture_half_float
// GL_OES_element_index_uint
// GL_OES_mapbuffer
// GL_OES_fragment_precision_high
// GL_OES_compressed_ETC1_RGB8_texture
// GL_OES_EGL_image
// GL_OES_EGL_image_external
// GL_OES_required_internalformat
// GL_OES_depth_texture
// GL_OES_get_program_binary
// GL_OES_packed_depth_stencil
// GL_OES_standard_derivatives
// GL_OES_vertex_array_object
// GL_OES_egl_sync
// GL_OES_texture_npot
// GL_EXT_multi_draw_arrays
// GL_EXT_texture_format_BGRA8888
// GL_EXT_discard_framebuffer
// GL_EXT_shader_texture_lod
// GL_IMG_shader_binary
// GL_IMG_texture_compression_pvrtc
// GL_IMG_texture_compression_pvrtc2
// GL_IMG_texture_npot
// GL_IMG_texture_format_BGRA8888
// GL_IMG_read_format
// GL_IMG_program_binary
// GL_IMG_uniform_buffer_object
// GL_IMG_multisampled_render_to_texture
materials
OK!
i know why it's so slow, you practically draw something 300x per frame and it doesn't really matter if it has 2 trinagles or 300 per one call.
300x setup shader per frame is almost a limit for slower(not slow) devices.
Main issues:
1) do not ever call glGetError when not debugging/running debug build - it makes pipeline stall (pipeline stops and waits until all commands are executed)
2) since you have 100 lines - and using for all of them same program, why not to group them in one array ?
2 solutions
-----------------
A)
= you are not using vertex buffers - so
1) create temporary memory and pre-transform all lines/triangles into one array - will be much faster
2) setup shader once + set uniforms
3) setup attributes - start of temporary array you created (every call - believe me, it will be faster, good practice is create array on stack, but beware of overflow - but for 300 lines is practically impossible)
3) call one draw call for all lines/triangles at once
B) even faster solution (fake instancing) - this is really fast
= create vertex buffer with data (and now create this as real VBO !)
- and not with only 1 instance of line, but with reasonable count - for instance 300 (fake instancing) - 300x line data repeated,
- in tex.x,y (for instance) - set index 0.299 -> x = (float(index % 256) / 256.0f ) y = ( (index & (~255)) / 256.0 ) - using lowp vec2 inTex; attribute
= in shader:
- create uniform array with coordinates for instance uniform mediump vec3 positions[300];
- in vertex part - something like this
gl_Position.xyz = inPosition.xyz + positions[(int) ((inTex.x * 256.0) + (inTex.y * 65536.0)) ];
1) use shader
2) fill array with positions and set it to uniform
3) set attributes
4) draw - and according to situation change count of elements drawn
if you need draw more than 300 lines, enlarge array OR just do more calls this time this is getting efficient
But i suppose 1st solution will be more than enough.
Cheers.
P.
Petr Sovis said:
OK!
i know why it's so slow, you practically draw something 300x per frame and it doesn't really matter if it has 2 trinagles or 300 per one call.
300x setup shader per frame is almost a limit for slower(not slow) devices.
Main issues:
1) do not ever call glGetError when not debugging/running debug build - it makes pipeline stall (pipeline stops and waits until all commands are executed)
2) since you have 100 lines - and using for all of them same program, why not to group them in one array ?
2 solutions
-----------------
A)
= you are not using vertex buffers - so
1) create temporary memory and pre-transform all lines/triangles into one array - will be much faster
2) setup shader once + set uniforms
3) setup attributes - start of temporary array you created (every call - believe me, it will be faster, good practice is create array on stack, but beware of overflow - but for 300 lines is practically impossible)
3) call one draw call for all lines/triangles at once
B) even faster solution (fake instancing) - this is really fast
= create vertex buffer with data (and now create this as real VBO !)
- and not with only 1 instance of line, but with reasonable count - for instance 300 (fake instancing) - 300x line data repeated,
- in tex.x,y (for instance) - set index 0.299 -> x = (float(index % 256) / 256.0f ) y = ( (index & (~255)) / 256.0 ) - using lowp vec2 inTex; attribute
= in shader:
- create uniform array with coordinates for instance uniform mediump vec3 positions[300];
- in vertex part - something like this
gl_Position.xyz = inPosition.xyz + positions[(int) ((inTex.x * 256.0) + (inTex.y * 65536.0)) ];
1) use shader
2) fill array with positions and set it to uniform
3) set attributes
4) draw - and according to situation change count of elements drawn
if you need draw more than 300 lines, enlarge array OR just do more calls this time this is getting efficient
But i suppose 1st solution will be more than enough.
Cheers.
P.
Click to expand...
Click to collapse
Thanks
When I wrote I saw the glerror maybe it will slow down a bit.
Since I am coming from an object oriented development environment it was designed on that way...
The candle: line + triangle can have other data too. Maybe need to keep elsewhere the data...
The last candle line and rectangle and his color can change almost at each draw method: just 1 of the 4 params will nort change.
When the last candle is closed a new one need to be staeted
In this case needs to. Shift to left all other candles. Maybe for this I am keeping in separate methods.
I thought the shader setup is done in other part at least there I am getting the pointer to they. On surface changed/ created - I am not at PC now.
Text with price + time scale should be with a texture to a rectangle?
I will reply inline:
matheszabi said:
Thanks
When I wrote I saw the glerror maybe it will slow down a bit.
Since I am coming from an object oriented development environment it was designed on that way...
Click to expand...
Click to collapse
Object development has nothing to do with this , glGetError is NOT a function to retrieve error status from GL functions, its for debugging purposes only. Its commonly used as: (simple form)
#ifdef _DEBUG
#define CHECKGL(x) x; assert(glGetError() == GL_NO_ERROR)
#else
#define CHECKGL(x) x
#endif
CHECKGL( glUniform4f(.... .) );
or still very fast
#define CHECKGL(x) x; if (globalDebugGL) { assert(glGetError() == GL_NO_ERROR); }
matheszabi said:
Thanks
The candle: line + triangle can have other data too. Maybe need to keep elsewhere the data...
The last candle line and rectangle and his color can change almost at each draw method: just 1 of the 4 params will nort change.
When the last candle is closed a new one need to be staeted
In this case needs to. Shift to left all other candles. Maybe for this I am keeping in separate methods.
Click to expand...
Click to collapse
Again - preparing something to vertex buffer is 100x faster than calling gluseProgram, gluniform and then draw call.
Different values per "candle": you can change (per candle) color, position, tex coords, and another values - to max 16 vec4 attributes per vertex in vertex buffer.
just for your imagination what does exactly glUniform: it recompiles and rebuilds shader with new values. It's not fast at all. So drawing 2 triangles with new shader setup (different uniform values) is not very smart. You have only 800-1000 such operations per frame tops. New card can handle much more. Look for term "draw call batching" to learn more. Unity's main feature.
Just imagine, even chip in your phone can easily draw 20 textured MTris per sec and you draw just few thousands and it's sweating.
Very nice article about GLES 2.0 from apple - google for "OpenGL ES Design Guidelines" most of it is true on android as well
matheszabi said:
Thanks
I thought the shader setup is done in other part at least there I am getting the pointer to they. On surface changed/ created - I am not at PC now.
Text with price + time scale should be with a texture to a rectangle?
Click to expand...
Click to collapse
That differs according to your situation.
- Is price/time always same ? (texture)
- it's changing per frame, (prerender texture)
- it's changing per "candle" ? - I posted articles about text in gl apps in the last post.
I thing you can choose your way !
Cheers
P.
Thanks for answer.
Petr Sovis said:
That differs according to your situation.
- Is price/time always same ? (texture)
- it's changing per frame, (prerender texture)
- it's changing per "candle" ? - I posted articles about text in gl apps in the last post.
Click to expand...
Click to collapse
Price/time is the same until: the user press a button, than will change the time ( From To values) and collecting data will result a min price and a max price. So the price probably will change at that button event, but not all the time.
Also the last candle price value is "moving" at least the close value, but an move the min or max value too, which can be the min or the max of the whole chart, on those rare situations need to change the coordinate system too. Can be used here a trick as it is changing and it will add +20% so what not need to change on each tick (frame)
233528246055
matheszabi said:
Thanks for answer.
Price/time is the same until: the user press a button, than will change the time ( From To values) and collecting data will result a min price and a max price. So the price probably will change at that button event, but not all the time.
Also the last candle price value is "moving" at least the close value, but an move the min or max value too, which can be the min or the max of the whole chart, on those rare situations need to change the coordinate system too. Can be used here a trick as it is changing and it will add +20% so what not need to change on each tick (frame)
Click to expand...
Click to collapse
I would definitely use rendering text technique I already posted. Its very fast (when implemented properly) and you can "print" whatever you want.
One of the following
bitmap fonts: (more content preparations - you need to prepare texture for each font)
-------------------
font bitmap creator: google: angelcode bmfont
+ sample: google: "nehe 2d_texture_font"
freetype implementation: (easier use - free type can generate font you want - also very fast)
-------------------------------------
it's possible to compile it with ndk - i use it and it's simple
google: freetype
and code for starters: google: "nehe freetype_fonts_in_opengl"
Cheers
P.

Categories

Resources