Related
I can't believe you can't sync or transfer files via usb. Someone please tell me I'm wrong because I've been googling for an hour and looks like the transfer program from asus is for pc only. I can use dropbox for smaller files but video transfers are going to be a pain. Any ideas?
johnnyutah22 said:
I can't believe you can't sync or transfer files via usb. Someone please tell me I'm wrong because I've been googling for an hour and looks like the transfer program from asus is for pc only. I can use dropbox for smaller files but video transfers are going to be a pain. Any ideas?
Click to expand...
Click to collapse
There's no reason to have to use a transfer program. Just mount as SD device
ASUS probably expects Mac users to be using a iPad.
dsmitty166 said:
There's no reason to have to use a transfer program. Just mount as SD device
Click to expand...
Click to collapse
Care to explain how? It doesn't mount as an SD device, or give the option to do that. It shows up as using MTP, like the Galaxy Tab.
Mac users need this,
http://www.android.com/filetransfer/
Yue Fairchild said:
Care to explain how? It doesn't mount as an SD device, or give the option to do that. It shows up as using MTP, like the Galaxy Tab.
Click to expand...
Click to collapse
My Bad, haven't received my device yet.
Looks like e.mote has you covered!
e.mote said:
Mac users need this,
http://www.android.com/filetransfer/
Click to expand...
Click to collapse
Thanks, worked like a charm.
AirDroid is the bomb! Try it. Mac or pc & interface & functions are phenomenal.. it is what I use daily. Plus it is free.
Android file transfer has a file size limit! What the heck? Any ideas on transferring large files?
Transferring files using USB is too slow. Even on a 3mb mp3 it asks if I want to copy it because it might not be usable. I press ok and it takes another 20 seconds to copy. So I copied 3gb (took about 15 minutes) of music over to the internal hd and then I get a strange error. I close the window and reopen the drive and see that all the music I just transferred is completely gone. WTF IS GOING ON?!?!
I'm getting so many errors accessing the internal drive, creating folders, and copying files. It's almost as if the internal 32gb is useless... I can't use it unless I want to wait 27 minutes to transfer a 1.5gb movie...
Someone reported the same with accessing microSD from USB connection.
Do you get any pop ups on the computer saying that "This device can perform faster if plugged into a USB 2.0 port"?
Also, can I suggest doing a local file transfer over the WiFi?
it's all due to MTP. it is the transfer protocol of the devil.
why google decided this is what their devices should use from 3.x onwards is beyond me.
google's company motto should really be "one step forward, fifteen steps back."
adiliyo said:
why google decided this is what their devices should use from 3.x onwards is beyond me.
Click to expand...
Click to collapse
It's so they can unify app storage with data, apparently:
With the unified storage model we introduced in Honeycomb, we share your full 32GB (or 16GB or whatever) between app data and media data. That is, no more staring sadly at your 5GB free on Nexus S when your internal app data partition has filled up -- it's all one big happy volume.
However the cost is that Android can no longer ever yield up the storage for the host PC to molest directly over USB. Instead we use MTP. On Windows (which the majority of users use), it has built-in MTP support in Explorer that makes it look exactly like a disk. On Linux and Mac it's sadly not as easy, but I have confidence that we'll see some work to make this better.
Click to expand...
Click to collapse
http://www.reddit.com/r/Android/comments/mg14z/whoa_whoa_ics_doesnt_support_usb_mass_storage/
Although I suppose there's no reason they couldn't offer a special Mass Storage mode that locks out running programs. The link also suggests that the external microSDHC card should support mass storage? I don't have a HC/ICS device to know yet, though.
This whole storage "issu" is so not a big deal at all.
It's that way on every honeycomb tablet and it works okay overall.
Sure maybe it's gonna take a while the first time to transfere all your content to your empty device but once all your **** is inside, you don't use it that much and never for such a big amount of data.
The thing with Android is that you can actually directly download the stuff you want on your tablet, no need to plug it into your computer 95% of the time.
^^
which begs the next question,
How easy is it to set up file transfer over the network between Prime and a Windows PC?
Setting up a network with a windows PC is hard, whatever the other device is.
But aside that I'm pretty sure it's fairly easy. And I think Asus software (myNet) can help you do this (never tried)
the_game_master said:
^^
which begs the next question,
How easy is it to set up file transfer over the network between Prime and a Windows PC?
Click to expand...
Click to collapse
I used file expert.
Sent from my Transformer Prime TF201 using xda premium
On my desktop PC I have a directory browser setup on my PC that I use any device that accepts IPs as input.
It's a Window's feature that has to be installed separately.
Internet Information Services
I use ES file explorer on N1. I connected it to my Windows PC over wi-fi once and it remembers it. I usually copy files back and forth using my phone only. It is pretty handy.
On prime, I have just installed it but not used it to transfer files, so cant comment on the speed.
DropBox if you're using Windows, SparkleShare if you're not.
subramanianv said:
I use ES file explorer on N1. I connected it to my Windows PC over wi-fi once and it remembers it. I usually copy files back and forth using my phone only. It is pretty handy.
On prime, I have just installed it but not used it to transfer files, so cant comment on the speed.
Click to expand...
Click to collapse
+1. After my Prime charging cable fell apart when i tried to unplug it, I had to resort to network transfers and ES file explorer did the job rather painlessly. The only little hurdle I had to jump over, and this might have been user-error on my part, but it asked for a username and password to the machine I was trying to connect to. So I had to add a password to my user account which previously did not have one to get it to connect.
Same here. ES file explorer is great stuff. Just put in the needed IP address for your PC + username/password for the user account, and it gets you in and loads directories pain-free.
I don't intend on connecting my Prime to my PC until a one-click root is in the works =)
BUYMECAR said:
I don't intend on connecting my Prime to my PC until a one-click root is in the works =)
Click to expand...
Click to collapse
?... Why is that?
RussianMenace said:
?... Why is that?
Click to expand...
Click to collapse
Because transfer over WiFi + ES has been significantly faster with every Android device I've ever connected to my laptop.
Besides, I kinda get bored of tired-ole drag n' drop.
kokusho said:
Setting up a network with a windows PC is hard, whatever the other device is.
But aside that I'm pretty sure it's fairly easy. And I think Asus software (myNet) can help you do this (never tried)
Click to expand...
Click to collapse
swift ftp server on the prime and filezilla client on the pc is fast and straightforward
slow as hell
Loading music is a pain but I can deal with it. I dont have internet I tether everything with my 4LTE verizon at 18MB a sec which Iam loving so much I turned off my home internet just use laptops and this now.
blackinjun said:
swift ftp server on the prime and filezilla client on the pc is fast and straightforward
Click to expand...
Click to collapse
NICE! Using SwiFTP now and it transfers a lot faster than before. Thanks
Easiest way I found was, pop the MicroSD in my PC load it up. Pop it in the prime, use a file explorer and move it over fast and easy.
Hi,
The new ICS builds work great but one of the issues if you use a USB Adapter and you mount a USB stick to it it does not ask you to unmount it.
I wrote a little app just to do that, to safely un-mount the USB stick before you remove it from the Tablet. You may still get the android.process.media has stopped error, but you can ignore it.
This should work on all Galaxy Tablet 10.1 versions.
ChangeLog:
2012/02/18 Version 1.0 Initial release.
Tested and it works. Just install the application and run it when you want to remove the flash disk. You need to tap on the Android and you will see the message that the stick has been unmounted.
You may only get the error message the first time. I you plug in a USB stick again, when removed you don't get the error message.
Definitely a must have for those using USB sticks with the adapter.
Deleted.
Sorry, post wrong area
isimobile said:
Hi,
The new ICS builds work great but one of the issues if you use a USB Adapter and you mount a USB stick to it it does not ask you to unmount it.
I wrote a little app just to do that, to safely un-mount the USB stick before you remove it from the Tablet. You may still get the android.process.media has stopped error, but you can ignore it.
This should work on all Galaxy Tablet 10.1 versions.
ChangeLog:
2012/02/18 Version 1.0 Initial release.
Click to expand...
Click to collapse
Running AOKP build 23, ICS does not mount my flash drive with the usb adapter. Stickmount in the market fixes this, and has an unmount command as well.
No problem mounting on isi's ROM. This application is only for unmounting.
Tested Stickmount and the functionality is the same. The error message after removing the stick is also there.
Sent from my GT-P7100 using xda premium
and how mount usb drive on ics ?
AnakTeKa said:
and how mount usb drive on ics ?
Click to expand...
Click to collapse
Look 2 posts above.
Sent from my GT-P7100 using xda premium
Will this work for the Galaxy Note?
You can try and if it doesn't work just uninstall it.
Sent from my GT-P7500 using XDA Premium HD app
I've tried the app on a cheap Chinese WM8850 based tablet running ICS and it doesn't work. It says that the drive is unmounted, but the files are still visible even if USB scanning is disabled. The drive can be unmounted by going through the Settings menu and it's under storage>USB>unmount SD card (sic). That unmounts the drive (and doesn't unmount the SD card). A button on the home page to do the job would be welcome, but I'm not (yet) sufficiently familiar with ICS to have a go at writing one.
I have been just pulling out my usb and nothing bad has happened.
Maybe a stupid question, but is it really necessary to unmount before pulling out the USB?
I know that things could go wrong, but is it really risky to just pull out?
Not absolutely necessary but a good practise. I have run into a few issues on my Windows system due to delayed write operations. It's just a habit I acquired and hasn't done any harm.
Sent from my GT-P7500 using XDA Premium HD app
will try it on iconia a500
jimrob233 said:
I've tried the app on a cheap Chinese WM8850 based tablet running ICS and it doesn't work. It says that the drive is unmounted, but the files are still visible even if USB scanning is disabled. The drive can be unmounted by going through the Settings menu and it's under storage>USB>unmount SD card (sic). That unmounts the drive (and doesn't unmount the SD card). A button on the home page to do the job would be welcome, but I'm not (yet) sufficiently familiar with ICS to have a go at writing one.
Click to expand...
Click to collapse
I use a usb sticks a lot on iconia. after moving to ics, the unmount disk is a pita, will try this on iconia.
thanks
[email protected] said:
I have been just pulling out my usb and nothing bad has happened.
Maybe a stupid question, but is it really necessary to unmount before pulling out the USB?
I know that things could go wrong, but is it really risky to just pull out?
Click to expand...
Click to collapse
Ok I'm gonna try my best and explain it, this is certainly the case for windows PCs at least and I'm assuming the option is there in Android, as it does the same thing.
Basically when you write files to a removable storage device, it holds part of the data in a buffer if there isn't enough data for it to warrant the process being carried out. Unless you copy a substantial amount for it to do it in one go of course.
If it has got some data in the buffer, when you tell it to unmount, you're actually telling it to write any remaining data to the removable storage, flush the buffer and eject the device.
The problems occur if you pull out the device before "all" the data has been written, ending up with corrupt files on the device you were copying it to.
Hope this all makes sense and gives you an answer to your question.
Swyped from my finger to your face, on my Samsung Galaxy Note.
Hellow,
Is it possible to connect a external HDD to my tab?
I have a HDD with a power supply and the HDD has a USB port.
So I connect the USB cable from my HDD to my tab and it goes into MTP mode, so it recognizes something so is it possible?
Thanks a lot!!
I think someone mentioned this before but to do that you need a market app to "Read" it, USB Mount I think was the name, not sure.
Misledz said:
I think someone mentioned this before but to do that you need a market app to "Read" it, USB Mount I think was the name, not sure.
Click to expand...
Click to collapse
Thanks, I installed it and it detects something but the app freezes.
Glad that helped I guess there are alternatives
As detailed here:
http://www.jayceooi.com/2012/03/14/...-storage-on-android-4-0-ics-samsung-galaxy-s2
I need MSC (not MTP) to use the S3 with my backup program. I don't yet have the S3. Thanks in advance.
bradavon said:
As detailed here:
http://www.jayceooi.com/2012/03/14/...-storage-on-android-4-0-ics-samsung-galaxy-s2
I need MSC (not MTP) to use the S3 with my backup program. I don't yet have the S3. Thanks in advance.
Click to expand...
Click to collapse
No USB Mass Storage on Galaxy S3. No USB Utilities like Galaxy S2. So file transfering a bit slow esp small file!
Zanr Zij said:
No USB Mass Storage on Galaxy S3. No USB Utilities like Galaxy S2. So file transfering a bit slow esp small file!
Click to expand...
Click to collapse
Thanks. That's a shame .
Does USB Debugging enable USB Mass Storage? I believe it does on Gingerbread. I've read reports it doesn't on ICS though.
bradavon said:
Thanks. That's a shame .
Does USB Debugging enable USB Mass Storage? I believe it does on Gingerbread. I've read reports it doesn't on ICS though.
Click to expand...
Click to collapse
It does not sadly.
Why there's no mass storage is beyond me. Hopefully a FW update (probably in early autumn) will fix it.
The Smoking Man said:
Why there's no mass storage is beyond me. Hopefully a FW update (probably in early autumn) will fix it.
Click to expand...
Click to collapse
I doubt it will come. It's not default in Android anymore.
Sent from my GT-I9300 using xda premium
The Smoking Man said:
Why there's no mass storage is beyond me. Hopefully a FW update (probably in early autumn) will fix it.
Click to expand...
Click to collapse
Unfortunately not. Google moved from UMS to MTP with Honeycomb because UMS locks out the storage to the phone when it's plugged into a computer.
I've never heard of this being an actual problem for anyone. You've only got it plugged in for a set period of time.
There's much more on it here: http://www.androidpolice.com/2011/1...behind-galaxy-nexus-lack-of-usb-mass-storage/
problem with usb storage
Hi, I went to setting, more, USB utilities, this is where my problem starts.
My phone say, "USB is connected. Remove the cable." but my phone isn't connected to the cable!
Any suggestions on what to do?
Thanks
bradavon said:
As detailed here:
http://www.jayceooi.com/2012/03/14/...-storage-on-android-4-0-ics-samsung-galaxy-s2
I need MSC (not MTP) to use the S3 with my backup program. I don't yet have the S3. Thanks in advance.
Click to expand...
Click to collapse
If you are having a rooted phone, there are StickMount from chainfire, Alt Mounter and SGS3 easy UMS that will allow you to connect the android in Mass Storage Mode.
Can someone post a link for SGS3 easy UMS because download keeps failing from site and Google didn't help.
Michael_P said:
Can someone post a link for SGS3 easy UMS because download keeps failing from site and Google didn't help.
Click to expand...
Click to collapse
[APP] [v1.1] Mount external microSD card as USB mass storage
Stick Mounter has nothing to do with UMS.
Alt Mounter requires a helper service on the computer and can only provide FTP access, no real mass storage.
Here's what you can run on the Terminal (the Helper app only runs the commands for you; easier to use)
http://forum.xda-developers.com/showpost.php?p=27282116&postcount=58
So has anyone actually tried SGS3 easy UMS? If it works will the host on my car stereo, tv etc recognise it and is there any system side effects I should know about.
If you don't trust the app (the commands really work =D ), get 'Gscript lite' in Google Play and add the corresponding parts as 2 different scripts which you then put on your homescreen for easy access.
That will do exactly the same for you.
Whether it works with car hifi etc depends on your devices. A user 'Siran' reported that his car-stereo took some time to recognize it and the playback had hiccups, but at least the last issue could be attributed to the SDcard not being unmounted in the phone before mounting it on the computer.
Currently the app uses the 'old method' while my script correctly mounts/unmounts to prevent such issues.
The side effect is the same as always; that particular card is not mounted and available in the phone as long as it's mounted as mass-storage on external devices. However that should not be a real issue. No negative side effects are known or likely to exist.
d4fseeker said:
If you don't trust the app (the commands really work =D ), get 'Gscript lite' in Google Play and add the corresponding parts as 2 different scripts which you then put on your homescreen for easy access.
That will do exactly the same for you.
Whether it works with car hifi etc depends on your devices. A user 'Siran' reported that his car-stereo took some time to recognize it and the playback had hiccups, but at least the last issue could be attributed to the SDcard not being unmounted in the phone before mounting it on the computer.
Currently the app uses the 'old method' while my script correctly mounts/unmounts to prevent such issues.
The side effect is the same as always; that particular card is not mounted and available in the phone as long as it's mounted as mass-storage on external devices. However that should not be a real issue. No negative side effects are known or likely to exist.
Click to expand...
Click to collapse
Well, isn't possible then to use it simultaneously from the phone and the usb? What does this app stand for then?
Multi Mount SD-Card and MountUSB Widget
It is, check the "--- BELOW ..." lines in my link.
However it WILL cause data corruption and data loss and might even cause the SDcard's filesystem to be damaged beyond repair.
What you do is use the same filesystem in 2 distinct locations which individually write on it.
To understand how that causes an issue, you'll have to get a basic understanding of a filesystem; they actually work like a science book.
You have an index listing all directories and files aswell as their relation to each other and where on the SDcard the file is stored.
Now if a file is modified the index is changed and then the file added,changed or deleted.
So far, so wel.
If you now mount it on 2 locations (mind you: filesystems don't know about that, so each location thinks it is the sole one accessing it) and work from 2 locations on the same data you have a rather high chance that one operating system will eventually overwrite or alter data without the other one knowing about it.
If the index is too damaged you'll not only loose some files but potentially all filenames and folders. Applications like Recuva can recover most of the files (at least usually) but it won't be pretty, easy and complete.
Simply don't do it. There is a reason why noone implements it
Just tried SGS3 easy UMS on my Tv and Dvd player through their host and worked fine with music, videos and images, and i'll check my car stereo tomorrow, so thanks d4fseeker.
scandiun said:
If you are having a rooted phone, there are StickMount from chainfire, Alt Mounter and SGS3 easy UMS that will allow you to connect the android in Mass Storage Mode.
Click to expand...
Click to collapse
This is different. It's for mounting a USB flash drive on the phone.
nawat said:
This is different. It's for mounting a USB flash drive on the phone.
Click to expand...
Click to collapse
You mean OTG (USB On the GO). I though it was for both OTG and MSC.
Last night, due to the wonders of MTP, it took me nearly 2 hours to transfer 2gb of data from my S2 over to the S3, with many popup interruptions delaying the transfer.
God I hate MTP's speed with many small files. But I guess it could be worse if they locked the filesystem down.