Which method to follow for unlocking - XPERIA X10 Q&A, Help & Troubleshooting

I am really confused.Am on baseband 2.1.54 with WB-XPERIA TW 009 and i wanna upgrade to Wolfs TW Gingerbread.But i am taking maximum precuations as i bricked a friends phone trying to do it.First time i am bricking a phone.So i wanna be careful this time
Can some one tell me what exactly to do?Everyone is giving me half replies only.
I want to use Unlocked Bootloader Doomlord (http://forum.xda-developers.com/showpost.php?p=17444017&postcount=10392).I want to knw which method to follow to unlock my bootloader
This:
http://forum.xda-developers.com/showthread.php?p=19685019#post19685019
or this:
http://forum.xda-developers.com/showthread.php?t=1254087
Should i do this after updating to 2.3 using pc companion or before updating?
If i update through pc companion then should i flash again with the bundle that wolfbreak gave (http://forum.xda-developers.com/showthread.php?t=1192988)?

Well if you have confirmed if your phone has the requirements for bootloader unlocking (please check it for confirmation as you don't want your phone to be bricked), then you're good to go. use the first link, because it's very very VERY easy compared to the second one. ^^
One thing though.. some users have tried to unlock their bootloader and have been successful, but their radio signals becomes dropped and unavailable.. i don't know what happened to them but the only way to restore the radio signal is to re-unlock their sims. But I don't think that will happen to you as you take very extreme precautions. good luck!
---------- Post added at 04:43 PM ---------- Previous post was at 04:40 PM ----------
aswinrulez said:
Should i do this after updating to 2.3 using pc companion or before updating?
If i update through pc companion then should i flash again with the bundle that wolfbreak gave (http://forum.xda-developers.com/showthread.php?t=1192988)?
Click to expand...
Click to collapse
Well according to the instructions,
Crowds said:
For safer and easier please assure that you are running Stock SE firmware 2.1 or 2.3.3.
You can be running on a Custom ROM, but make sure you are on Stock SE Kernel.
Click to expand...
Click to collapse

what is actually the advantage of unlocking?
EDIT:
Already got the answer to this one

So this is what am supposed to do.Plz do verify the steps
1.Update to stock 2.3 using pc companion
2.Use http://forum.xda-developers.com/showthread.php?p=19685019#post19685019 method to unlock my bootloader
3.Then flash to wolfbreak's gingerbread firmware
4.i DONT have to flash the ftf bundle tht wolf provided because i would be on the 2.3 kernel coz i did official update.
5.Now which one to use from http://forum.xda-developers.com/showthread.php?p=19699711#post19699711
Please do verify and clarify my 5th point also.
Thanks a lot in advance

aswinrulez said:
So this is what am supposed to do.Plz do verify the steps
1.Update to stock 2.3 using pc companion
2.Use http://forum.xda-developers.com/showthread.php?p=19685019#post19685019 method to unlock my bootloader
3.Then flash to wolfbreak's gingerbread firmware
4.i DONT have to flash the ftf bundle tht wolf provided because i would be on the 2.3 kernel coz i did official update.
5.Now which one to use from http://forum.xda-developers.com/showthread.php?p=19699711#post19699711
Please do verify and clarify my 5th point also.
Thanks a lot in advance
Click to expand...
Click to collapse
after setp 1 and b4 step 2 u need to "root" your phone. use doomlord's zergrush method, or azuzu downgrade+upgrade method.
secondly, flash doomlord v6 kernel "BEFORE" flashing wolf's rom. (it's better that way)
lastly. use "full-oc" kernel first. it you get booting problems then try "semi-oc"

is it ok if i go for semi oc coz my i want my battery to last long ?

I use his failsafe kernel and earlier 6AM i charged my battery full, now at 4:30PM i got 84%. so 16% of battery were used at 10 hours. how's that?

kensixx said:
I use his failsafe kernel and earlier 6AM i charged my battery full, now at 4:30PM i got 84%. so 16% of battery were used at 10 hours. how's that?
Click to expand...
Click to collapse
it depends largely on usage and type of ROM you are using.
Sent from my X10i using XDA App

btw aswin u said u bricked a friends phone. was it x10? if so then it's most probably not fully bricked. i can help you unbrick it.
Sent from my X10i using XDA App

championswimmer said:
btw aswin u said u bricked a friends phone. was it x10? if so then it's most probably not fully bricked. i can help you unbrick it.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
well then i shld have met u long bak coz he gave the phone back and got N900 instead.But i tried a lot to unbrick it.Asked a lot of people here in xda but was no use.Anyways thanks.Maybe when i brick another x10 (and hopefully not mine )

kensixx said:
I use his failsafe kernel and earlier 6AM i charged my battery full, now at 4:30PM i got 84%. so 16% of battery were used at 10 hours. how's that?
Click to expand...
Click to collapse
thats good.I had a lot of problem with my battery but then i stated usng setcpu and set it to powersave mode and have been getting very good battery backup but sacrificing little performance.But then i dont play games or anything.SO its ok

Well, have you unlocked your bootloader now?

Related

Cant update from 1.6 to anything

Hey all,
Im having a problem, I cant update my x10i from 1.6 to anything.
Ive tried every way from seus, pc companion and flash tools.
Any one ever had this prod before ??
mistamikel said:
Hey all,
Im having a problem, I cant update my x10i from 1.6 to anything.
Ive tried every way from seus, pc companion and flash tools.
Any one ever had this prod before ??
Click to expand...
Click to collapse
Flashtool should work in every circumstances, so would you please tell us more about your problem in flashing?
aR_ChRiS said:
Flashtool should work in every circumstances, so would you please tell us more about your problem in flashing?
Click to expand...
Click to collapse
Every time I flash the cell just powers on then nothing, Ive left it for upwards of 2hrs with nothing. When I update to 2.3 it hangs in a boot loop at the SE logo.
as chris sed, flash tool should work in all circumstances. jus a few questions, when u used flashtool did it succesfully flash with no errors, did u make sure u had enuff battery to flash (50% is recommended). if u had no errors with flashtool and u had enuff battery than i cant see y not it hasnt worked.
sofir786 said:
as chris sed, flash tool should work in all circumstances. jus a few questions, when u used flashtool did it succesfully flash with no errors, did u make sure u had enuff battery to flash (50% is recommended). if u had no errors with flashtool and u had enuff battery than i cant see y not it hasnt worked.
Click to expand...
Click to collapse
No errors and full battery each time. I have no idea why I cant update and its a real pain in the ass.
have u always had this problem or has it jus started to occur recently?
onli other thing i can can suggest is use another computer to flash n see if it works or not
sofir786 said:
have u always had this problem or has it jus started to occur recently?
onli other thing i can can suggest is use another computer to flash n see if it works or not
Click to expand...
Click to collapse
Allways
And Ive tired 3 different cpus
If any one can recomend a 2.3 rom for flashtools please do so.
My baseband is 1.0.14 and build is R1FA014
So when I flash a rom that works ie 1.6 it shows TA valeus in the flash tools log, but when I flash a rom that wont boot up there are no TA values. Any one have any advice?
Also Ive downloaded 3 different branded 2.1 roms and they all work but.... when my cell boots up and I go into settings and about.. it still says 1.6 ??? WTF!!!
mistamikel said:
Also Ive downloaded 3 different branded 2.1 roms and they all work but.... when my cell boots up and I go into settings and about.. it still says 1.6 ??? WTF!!!
Click to expand...
Click to collapse
I have to say that is pretty weird and i have never in my life come across it, ok give this a go. Flash a 2.1 Rom make sure that the particular rom can be upgraded to 2.3.3 thru seus or pc companion, id give u a link buh where i usually wud get that from is arkedk post in android development and theyve been deleted. so flash the 2.1 rom, then upgrade to official 2.3.3 using seus or pc companion. see how it goes, dnt know wot else to recommend really.
tried that, and even updated from 1.6 to 2.1 via pc companion and still nothing.
I HATE this phone!!!! thank god for my HD2
something somewhere in the process of wot u have been doing has gone wrong or there is a hard fault somewhere. sorry to hear uve had such a bad xperince with this phone, if uve got warranty send it off, thats all i can think of, or sell it on ebay. sorry i cudnt help u further, best of luck mate.
Do you have the most current drivers for ur phone? Does ur PC recognize ur phone when you turn on usb storage?
Sent from my X10i using XDA App
916x10 said:
Do you have the most current drivers for ur phone? Does ur PC recognize ur phone when you turn on usb storage?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Yup and yup, its the strangest thing ever. Can any one point me to a official eu 2.1 or 2.3 rom and not ftf file?
Unfortunately all official SE 2.3.3 fitmwares are in ftf format,if u want to flash a 2.3.3 rom via xrecovery than u need 71 baseband. Go to android development, I recommend erickwills or wolfbreaks rom,its upto u which u choose,hope u find a solution
Sent from my X10i using XDA Premium App
sofir786 said:
Unfortunately all official SE 2.3.3 fitmwares are in ftf format,if u want to flash a 2.3.3 rom via xrecovery than u need 71 baseband. Go to android development, I recommend erickwills or wolfbreaks rom,its upto u which u choose,hope u find a solution
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
I cant get into xrecovery because Im on 1.6. I cant find an official eu 2.3 ftf either. Damn this cell!!
mistamikel said:
I cant get into xrecovery because Im on 1.6. I cant find an official eu 2.3 ftf either. Damn this cell!!
Click to expand...
Click to collapse
here u go http://forum.xda-developers.com/showthread.php?t=1202782 . this is official 2.3.3 UK, u can choose different language at setup if ur default isnt english. comes in ftf format.
sofir786 said:
here u go http://forum.xda-developers.com/showthread.php?t=1202782 . this is official 2.3.3 UK, u can choose different language at setup if ur default isnt english. comes in ftf format.
Click to expand...
Click to collapse
Ive tired that one before, a few times actually. I really dont get it.
I did notice this in the flashtools log though
"SEC LOCK STATUS LOCKED" any one know what this means?
any one know where I can find a tmobile eu 2.1 or 2.3 ftf??

[Q] Easy way to root neo updated to 2.3.4

Hi, I am completely newbie with android but lately i had update my NEO to 2.3.4 and i want to root it without downgrading to 2.3.2 cause as i see from reading several post that it could cause some problems so i hope if there i a step-by-step guide to root my phone (also i want know if i root my phone can i still update to any new official rom update) .. thanks in advance
sasaisinlove said:
Hi, I am completely newbie with android but lately i had update my NEO to 2.3.4 and i want to root it without downgrading to 2.3.2 cause as i see from reading several post that it could cause some problems so i hope if there i a step-by-step guide to root my phone (also i want know if i root my phone can i still update to any new official rom update) .. thanks in advance
Click to expand...
Click to collapse
Unlock bootloader and flash "rootxperia zip" via recovery. Its fastest way.
Updates to ok.
Regards!
Taavi
Sent from my MT15i using Tapatalk
Thanks for your help but could you explain mor please cause as i said am completely newbie in this thanks again
http://forum.xda-developers.com/showpost.php?p=17706870&postcount=2
That's how I did it and all good. And really quick amd easy.
If the post makes little sense, read the various threads about Recovery, Bootloader unlocking and Root. It's all here.
LenAsh said:
http://forum.xda-developers.com/showpost.php?p=17706870&postcount=2
That's how I did it and all good. And really quick amd easy.
If the post makes little sense, read the various threads about Recovery, Bootloader unlocking and Root. It's all here.
Click to expand...
Click to collapse
I followed that and got "cannot download boot.img,device needs to be rooted first". Well,if I was rooted i wouldn't be doing that in the first place!?
You're doing something wrong then
You have unlocked BL?
Unlocking the boot loader is the way forward.
Sent from my LT15i using XDA App
Thanks for the replays,that was the problem. I thought it was unlocked,but actually wasn't. However I rooted,then installed CM 7 beta-nice,but still not ready for primetime. Now the question is what to do to return to stock rom-just flash it via flashtool? And will the root remain?
Clear/Reset Everything and then go through the procedure again (without re-unlocking BL obviously).
Follow the steps this time...
I suggest you use this ftf (Global 2.3.4) as it works perfectly.
http://www.megaupload.com/?d=KWNWTH47
Thanks again it worked flawlessly Now,do you know if there is a list or something about which system apps are safe to remove from the stock rom?
centavar said:
Thanks again it worked flawlessly Now,do you know if there is a list or something about which system apps are safe to remove from the stock rom?
Click to expand...
Click to collapse
Look arc forum. There is pretty good thread for that.
Sent from my MT15i using Tapatalk
thanks for reply, finally i rooted my neo but how to over clock
thanks finally i rooted my neo using this method http://forum.xda-developers.com/show...70&postcount=2 but now when i try to overclock my neo using set cpu it show me max 1024 but i cant exceed this so i want to know if there is any way to over clock to 1.4 or 1.5 thanks again
sasaisinlove said:
thanks finally i rooted my neo using this method http://forum.xda-developers.com/show...70&postcount=2 but now when i try to overclock my neo using set cpu it show me max 1024 but i cant exceed this so i want to know if there is any way to over clock to 1.4 or 1.5 thanks again
Click to expand...
Click to collapse
Flash doomlord v8 kernel via fastboot and you can overclock 1,9ghz. Your bootloader must be relocked!!
Regards!
Taavi
Sent from my MT15i using Tapatalk
taaviu said:
Flash doomlord v8 kernel via fastboot and you can overclock 1,9ghz. Your bootloader must be relocked!!
Click to expand...
Click to collapse
Are there still bugs with the doomlord kernel? I need WiFi absolutely, don't have a data plan...
The DoomKernel is to be avoided for now,as the Wifi and vibration are not working,tried it yesterday. I can live without the vibra,but Wifi is a must.
sdk16420 said:
Are there still bugs with the doomlord kernel? I need WiFi absolutely, don't have a data plan...
Click to expand...
Click to collapse
If you are 2.3.4 then YES. theres is a wifi etc bugs.
If you are 2.3.3 all OK.
AND if you already 2.3.4 then dont flash kernel because kernel dont work well...
We still wait new kernel source code relase

JUST WANT TO UPDATE MY X10 2.1 to 2.3 Gingerbread..

Hi Guys ..
I have an X10.. with Model number X10i.
I Bought from USA(having AT&T Provider Contract)
and now I m here in India.
Its Working fine, it is **Unkocked**...
I just want to Upgrade My Phones Firmware Version from 2.1-update1
To
The Newer Version 2.3 gingerbread..
As A Normal SonyEricsson Phone can Get Updated by PC companion..
My Phone Shows that I have a Latest Version..
I can not Update it Through Normal Procedure..
and then i Came to know that Bcoz its AT&T providers Product, I cant Update it NOrmaly by PC Companion..
I Just Want To Update My Phone..
Need help..
What to do and how to do..??
Support Will be appreciated..
Download & install flashtool here: http://androxyde.github.com/Flashtool/
Download a generic 2.3 build here (& put it in the firmware folder): http://www.multiupload.com/JEXUAHAZTL
Open flashtool, click on the flash icon , choose flashmode, select firmware & flash
Post number 2 is the correct device, apart from you will also need to
0. Make sure unknown sources and usb debugging are allowed in
/settings/applications
and
/settings/application/development
1. click on the padlock icon to root.
2. click on the key icon to ask root permissions, allow permissions on the phone.
3. then flash the rom.
thnx but 1 question....!
Thanx guys..
I hv No doubt in that U ppl Rocks..
But is it a proper way , i mean i hv Phone which is Unlocked..
And there will b no problem further more..?
To root mobile is Called Upgrading.?​
badshah_dude said:
Thanx guys..
I hv No doubt in that U ppl Rocks..
But is it a proper way , i mean i hv Phone which is Unlocked..
And there will b no problem further more..?
To root mobile is Called Upgrading.?​
Click to expand...
Click to collapse
What do you mean by "proper way"? Is it an official way to do it? No. Flashtool method is essentially another pc companion. It does everything pc companion can do and more. The only reason you have/need pc companion is to recognize the phone. That is it. The only problem you will have is a chronic headache from all the lag the stock 2.3.3 FW gives. Remedy that by rooting and installing a custom/complete ROM.
Rooting the X10 device is not necessary, but I highly recommend you do buddy. The X10 stock and when stands alone is a terrible device. but when rooted and applied with a custom ROM, the X10 lives up to many other devices that shouldn't be compared to. Technically, Rooting is not an upgrade. But if we look at the benefits of rooting, well thats a completely different story.
If you have any questions just ask. If I helped, Thanks button is always there bud
This is also my problem. I cant update my x10 to gingerbread. What generic 2.3 build shoud i download? and what is that complete rom?
Better Install a Custom ROM.. eaiser.. Faster.. loads of options
try MIUI... my personal Fav.. or u can use the Team Rom transparent.
haneesh_cv said:
Better Install a Custom ROM.. eaiser.. Faster.. loads of options
try MIUI... my personal Fav.. or u can use the Team Rom transparent.
Click to expand...
Click to collapse
i dont know what is that custom rom. where to get that?
akirabog said:
i dont know what is that custom rom. where to get that?
Click to expand...
Click to collapse
All over the place
Sent from my X10a using xda premium
negrobembon said:
All over the place
Sent from my X10a using xda premium
Click to expand...
Click to collapse
Its all multiupload links..do you have any mirror?

X10i or X10a bricked..!!! pls add a comment..

Hey,
'm curious to know, how many X10i are bricked, cause of any reason, just add your specific location, so we might help each other..
Here let's start with me:
Xperia Model:X10i
Bricked on: 5 March 2012
Location: Mumbai, India
Description: I had installed a custom rom and then I tried to install few apps, this was my 3rd custom rom and it crashed, didn't start ever after that..
Use seus or pc companion to repair
Sent from my X10S using XDA
Dear laneyofdeath,
Pls read few of my previous posts, I've tried all possible methods to put life back into that x10...............
It doesn't work..........!!!!
Did u try flashtool? I can only see one post by the way it doesn't mention seus
Sent from my X10S using XDA
I had the same problem as you recently.
Lost xrecovery, phone not booting, flashtool not seeing phone...
The only thing that fixed it was the flasher at wotanserver.com - someone mentioned it in a post here on XDA.
http://www.wotanserver.com/en/
Its free but you have to sign up...but it is well worth the 2 minutes.
Its all automatic, select your phone and thats it.
It flashes back to GB2.3.
Then you can use flashtool to go where you want from there.
Flashtool guide...
http://forum.xda-developers.com/showthread.php?t=928343
Have fun
mugsy730 said:
I had the same problem as you recently.
Lost xrecovery, phone not booting, flashtool not seeing phone...
The only thing that fixed it was the flasher at wotanserver.com - someone mentioned it in a post here on XDA.
http://www.wotanserver.com/en/
Its free but you have to sign up...but it is well worth the 2 minutes.
Its all automatic, select your phone and thats it.
It flashes back to GB2.3.
Then you can use flashtool to go where you want from there.
Flashtool guide...
http://forum.xda-developers.com/showthread.php?t=928343
Have fun
Click to expand...
Click to collapse
Thanks for the help broseph....
surajpardeshi said:
Dear laneyofdeath,
Pls read few of my previous posts, I've tried all possible methods to put life back into that x10...............
It doesn't work..........!!!!
Click to expand...
Click to collapse
If you say youve tried all possible methods-then the phones knackered.If it was me I would have
Try a different battery
Hardwire a battery
Try using a different pc
Try every version of flashtool
Try x10 flasher
Leave battery out for a while
Then after trying several times some of the above,and still nothing,It would go for repair or on eBay
Sent from my X10i using xda premium
Bricked on: 12/4/2012
Reason: After installed Fera v13.5 on locked bl, bricked~ seem like a known issue.
XIAO-WEI said:
Bricked on: 12/4/2012
Reason: After installed Fera v13.5 on locked bl, bricked~ seem like a known issue.
Click to expand...
Click to collapse
U need to provide more info but I'd start with seus
Sent from my X10S using XDA
XIAO-WEI said:
Bricked on: 12/4/2012
Reason: After installed Fera v13.5 on locked bl, bricked~ seem like a known issue.
Click to expand...
Click to collapse
If you're on locked BL then it's not bricked
Just use SEUS or Flashtool (with a 2.3.3 FTF) to go back to stock 2.3.3.
hi Underling,
I've tried
Try a different battery : Yes, done..same thing
Hardwire a battery: don't know how to do it (tries google, didn't get it, can you please enlighten)
Try using a different pc: Yes, done..same thing
Try every version of flashtool: Yes, done
Try x10 flasher: Trying, to work on it..............flasher, you meant to say wotonclient 3.8.0, correct me, if 'm wrong ?
Leave battery out for a while: Done

[Q] Confusion Prevails..need a bit of clarification

I am not a noob..have played alott with HTC and samsung phones...but sony seems to b a different ball game all together..i hv been reading threads since the last two days to unlock the bl of my neo v..and flash roms and stuff...
but there are a couple of qstns that are bothering me...
1-I wanted to install KA20.1 Ics rom..since its official stripped down ics... but it needs unlocked bootloader. i am currently running gb..2.3.4 .62...
first i though of rooting and using gb as it is.. but now since ics is here i am inclined to use ics
so here is my question..
If i unlock my bootloader..and then flash official ics using flashtool..will the bootloader get locked again?? will it create any kind of issue for me with regard to using flashtool and flashing official ics?? if yes then what..
will it have to b unlocked again???
and the next question
Everything remains the same in case of jj hybrid rom also??
but i wud appreciate all the help i can get ..cz whatever i learn i always give it back to the forum..
xda rocks..
cheers...
geekynoob said:
If i unlock my bootloader..and then flash official ics using flashtool..will the bootloader get locked again?? will it create any kind of issue for me with regard to using flashtool and flashing official ics?? if yes then what..
will it have to b unlocked again???
Click to expand...
Click to collapse
No.
Though not sure what you meant by "flashing official ics". If you meant with flashtool, then answer is still no.
If you meant on using PCC or SEUS then answer depends how you unlock your BL. IF you unlock it unofficial way, with s1tool, then you won't have any problem. If you unlock it via IMEI code from Sony developer page, then you won't be able to use PCC or SEUS until you relock your BL(which is done by flashing 1 ftf file).
And for both official and unofficial way worth rule, do not use OTA updates. For official way, that's 100% correct, while for unofficial way, some report problems, some don't have them.
Madfysh said:
No.
Though not sure what you meant by "flashing official ics". If you meant with flashtool, then answer is still no.
If you meant on using PCC or SEUS then answer depends how you unlock your BL. IF you unlock it unofficial way, with s1tool, then you won't have any problem. If you unlock it via IMEI code from Sony developer page, then you won't be able to use PCC or SEUS until you relock your BL(which is done by flashing 1 ftf file).
And for both official and unofficial way worth rule, do not use OTA updates. For official way, that's 100% correct, while for unofficial way, some report problems, some don't have them.
Click to expand...
Click to collapse
Ok..i knew u were around..
i will unlock my bl using s1 tool..the unofficial method...
then flash 4.0.4 using flashtool..
doing this wont relock my bl.. ??
i will not use ota..will freeze it using tb
i hope i am clear now..this internet slang is making tough to write sorry if i wasnt clear..
geekynoob said:
i will unlock my bl using s1 tool..the unofficial method...
then flash 4.0.4 using flashtool..
doing this wont relock my bl.. ??
Click to expand...
Click to collapse
That is correct, it wont get re-locked.
Madfysh said:
That is correct, it wont get re-locked.
Click to expand...
Click to collapse
Thank you so much for the prompt replies..
sorry for being offf topic now..since iv got ur attention..i just wanted to ask another qstn..
unofficial method shows 2 -ve points.. i have to connect any once to the test point m i right??
can i do THIS...
Flash 4.0.3 from here....
http://communities-origin.sonyericsson.com/thread/35239?tstart=0
Thn root it...using doomlords kit...
thn ota to 4.0.4 and then unlock the bootloader using s1 tool??
so that il hv the root intact..and also will b able to use cwm and roms and other things..
correct me if i am wrong.
thnkk you once again.
geekynoob said:
unofficial method shows 2 -ve points.. i have to connect any once to the test point m i right??
Click to expand...
Click to collapse
You mean 2 -ve battery pins? Yeah, only connect to 1, it's enough. Or you can also connect it to simcard holder, as I read, people also do that. Point is to ground it, whatever method you want
geekynoob said:
hw cn i hv cwm on a ics 4.0.4 i will have to root it first and then get cwm?? sorry if i am irritating u..but samsung was much easier ..m coming to grip with sony stuff..
Click to expand...
Click to collapse
You're not irritating. Usually I would irritate if someone asks without researching, but as I see you actually research yourself, so it's not hard to answer you
Anyway, for root and CWM, check this thread: http://forum.xda-developers.com/showthread.php?t=1678690
---------- Post added at 12:59 PM ---------- Previous post was at 12:58 PM ----------
I don't like OTA, and after you unlock your BL it will be smart not to use it, as we told above.
And if you unlock your BL it's much easier to root it, as I wrote, check that thread I linked in this post and try.
Madfysh said:
You mean 2 -ve battery pins? Yeah, only connect to 1, it's enough. Or you can also connect it to simcard holder, as I read, people also do that. Point is to ground it, whatever method you want
You're not irritating. Usually I would irritate if someone asks without researching, but as I see you actually research yourself, so it's not hard to answer you
Anyway, for root and CWM, check this thread: http://forum.xda-developers.com/showthread.php?t=1678690
Click to expand...
Click to collapse
My mind seems at some peace now..
i will folllow all the steps as u said..
i edited my post at the last moment..sorry for that..if i ave any issues..il b back here..
il do it..wil go slow..once in total grip.. m gonna hv some fun..
Thank you.. God bless..!
cheers..

Categories

Resources