On Friday I downloaded and installed the leaked XXKP8 through Odin (with pit file) to try it out. Then, I installed UltraToxic ROM through (again through Odin) to get back to Gingerbread. Ever since then,every time I install CyanogenMod 7, I get a screen reading "Kernel Painc Upload Mode" and I have to flash an Odin rom as I can't even access recovery.
I have tried reinstalling the old bootloader and modem, wiped everything and started from stock KI4, tried various different ROMs and kernels to start from, but I have had zero luck. My phone refuses to boot CyanogenMod 7.
I would be extremely grateful if anyone could solve my problem.
Thanks in advance
Flash old bootloader.
Envoyé depuis mon GT-I9100 avec Tapatalk
Paradoxxx said:
Flash old bootloader.
Envoyé depuis mon GT-I9100 avec Tapatalk
Click to expand...
Click to collapse
Thanks for the reply, but as I have already done that using the old bootloader from intratech's thread.
xethor said:
Thanks for the reply, but as I have already done that using the old bootloader from intratech's thread.
Click to expand...
Click to collapse
Woops, didn't read it. Hum, did you tried miui?
Envoyé depuis mon GT-I9100 avec Tapatalk
Paradoxxx said:
Woops, didn't read it. Hum, did you tried miui?
Envoyé depuis mon GT-I9100 avec Tapatalk
Click to expand...
Click to collapse
No, not yet. I'll try it now.
Kernel panic
xethor said:
No, not yet. I'll try it now.
Click to expand...
Click to collapse
I got the same problem. I tryed with CM7, Ginger 2.3.6, and MIUI, and the problem persists.
Please let me know what to do....
Thanks.
Try taking out your external SD card.
Lennyz1988 said:
Try taking out your external SD card.
Click to expand...
Click to collapse
That won't accomplish anything...
jjegan's post from another thread, try that
JJEgan said:
...................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Root with same CWM as backup .
Boot recovery restore backup .
jje
Click to expand...
Click to collapse
gr4ndm4st3r_bl4ck said:
That won't accomplish anything...
jjegan's post from another thread, try that
Click to expand...
Click to collapse
No?
In this thread, someone with the same problem said it was his solution.
http://forum.xda-developers.com/showthread.php?t=1428293
Lennyz1988 said:
No?
In this thread, someone with the same problem said it was his solution.
http://forum.xda-developers.com/showthread.php?t=1428293
Click to expand...
Click to collapse
I've read it before posting in your thread, but I'm still not quite sure what you get by removing the external SD card...
You should try it anyway , just to be sure you tried everything.
I may be very wrong...
gr4ndm4st3r_bl4ck said:
I've read it before posting in your thread, but I'm still not quite sure what you get by removing the external SD card...
You should try it anyway , just to be sure you tried everything.
I may be very wrong...
Click to expand...
Click to collapse
I'm having the exact same issues! JJE's response is from my thread and it doesn't help! I am going to try this kernel cleaning script. Hope it works. I can only flash using Odin, any attempts to do anything with CWM fails. Same scenario as OP.
Running stock KI3 kernel with CF-root installed using odin. ran the cleaning script in recovery... tried to flash CM7 zip twice... still same thing, keep getting stuck rebooting. I just took my sdcard out. Going to try the process all over again.
edit: I give up.... CWM5+ seems to work fine... anythiing to do with CWM 4 just fails
I'm running the latest CM9 release the MrPhilio one. I got droidexplorer installed for transfering files to my phone. Guess I'll stick with this for now until an official release of cm9.
axxessdenied said:
I'm having the exact same issues! JJE's response is from my thread and it doesn't help! I am going to try this kernel cleaning script. Hope it works. I can only flash using Odin, any attempts to do anything with CWM fails. Same scenario as OP.
Running stock KI3 kernel with CF-root installed using odin. ran the cleaning script in recovery... tried to flash CM7 zip twice... still same thing, keep getting stuck rebooting. I just took my sdcard out. Going to try the process all over again.
edit: I give up.... CWM5+ seems to work fine... anythiing to do with CWM 4 just fails
I'm running the latest CM9 release the MrPhilio one. I got droidexplorer installed for transfering files to my phone. Guess I'll stick with this for now until an official release of cm9.
Click to expand...
Click to collapse
I'm not sure which thread is which right now , but did you try flashing XWKK5 firmware from intratech's thread( Frankenstein build, it works perfect, I'm using it ) then rooting it , the CF-root method for XWKK5 comes with CWM 5.0... You should try that , then after that try to flash CM7, should work. Just don't forget to wipe data/cache/dalvik cache/battery stats before flashing ( i do it every time just to be sure)... Please let me know if that worked for you, I'm eager to solve your problem XD
Edit : same goes to the OP , flashing CM7 directly from CM9 or stock KP* does'nt seem to work because of the old CWM version... i guess...
Did you manage to fix it? I have the same problem
i'm also experiencing the same problem. anyone have a solution?
This worked for me
http://forum.xda-developers.com/showpost.php?p=21136550&postcount=28
removed sd card, flashed KG3 with odin (had to do it twice for some reason), the flashed cfroot for kg3 and rebooted into recovery, wipe data/format/cache and flashed cm7 twice then flashed gapps.
I happened to have have a backup up my CM7 so after flasing cm7, i did an advance recovery and restored just system/data/cache (not boot!).
I then proceeded to install the XXKL1 modem with Odin (modem only).
worked great, got a 'standard' bootloader now, new modem and its all good.
ojconcentrate said:
This worked for me
http://forum.xda-developers.com/showpost.php?p=21136550&postcount=28
removed sd card, flashed KG3 with odin (had to do it twice for some reason), the flashed cfroot for kg3 and rebooted into recovery, wipe data/format/cache and flashed cm7 twice then flashed gapps.
I happened to have have a backup up my CM7 so after flasing cm7, i did an advance recovery and restored just system/data/cache (not boot!).
I then proceeded to install the XXKL1 modem with Odin (modem only).
worked great, got a 'standard' bootloader now, new modem and its all good.
Click to expand...
Click to collapse
Yep, this is how I fixed my problem. I didn't bother updating the thread because it was on the third page at the time. I don't generally check the SGS2 Q&A sections.
Related
Hey Guys!
Have this Problem since i flashed CF-Root 5.4 on my Galaxy S2.
Don't know why this happened and i don't know what i can do to fix this Problem.
Entering USB mode in CWM isn't working.. just becoming this error mentioned in the Topic.
What can i do to fix it ?
Thank you for your help guys
hey !
I have the same Probleme since i flashed the new CF-Root Kernel ! What happened ? Somebody can help?
so_ony said:
Hey Guys!
Have this Problem since i flashed CF-Root 5.4 on my Galaxy S2.
Don't know why this happened and i don't know what i can do to fix this Problem.
Entering USB mode in CWM isn't working.. just becoming this error mentioned in the Topic.
What can i do to fix it ?
Thank you for your help guys
Click to expand...
Click to collapse
Hey you. Ehh i really do not know what to say or help but the only thing i can come up with is restore to a previous backup you have and try again... sorry
Stifler69 said:
Hey you. Ehh i really do not know what to say or help but the only thing i can come up with is restore to a previous backup you have and try again... sorry
Click to expand...
Click to collapse
didn't make any backup..
can i use any backup of another person?
Try flashing N.E.A.K. or another kernel tar package in ODIN while you have your phone in download mode.
That should fix your CWM recovery.
Logged using an SGS2 type droid while exploring CheckROM V6 quadrant on a research & rescue operation.......
geko95gek said:
Try flashing N.E.A.K. or another kernel tar package in ODIN while you have your phone in download mode.
That should fix your CWM recovery.
Logged using an SGS2 type droid while exploring CheckROM V6 quadrant on a research & rescue operation.......
Click to expand...
Click to collapse
problem is i can root my phone with cf root, but after flashing any other kernel my phone boots to the "Triangle" and is stopping there...
so_ony said:
problem is i can root my phone with cf root, but after flashing any other kernel my phone boots to the "Triangle" and is stopping there...
Click to expand...
Click to collapse
what are you trying to do? i am kinda confused by the whole thing
Stifler69 said:
what are you trying to do? i am kinda confused by the whole thing
Click to expand...
Click to collapse
ok step by step, i had checkrom on my phone and flashed the new criskelo rom on my phone 4.0.3 LPQ for testing it, and flashed it with cf root 5.4
but after testing i wanted to get back to checkrom and now i have this problem that i can't flash any other kernel! only CF-Root is working , with any other kernel i em ending at the "Triangle"..phone is not booting any more
Really, ICS and GB is going crazy. Flash stock, kernel, flash cf root kernel, then flash newest kernel to fix sd card issue, etc... Since ICS was updated on sgs2 everywhere just problem, not booting, not installing, etc. Really, really big pain.
I dunno man what could solve you problem. I'm gonna search in all threads to find some useful information, if I will, I will post here, should be somewhere answer. LOL, best of luck.
so_ony said:
ok step by step, i had checkrom on my phone and flashed the new criskelo rom on my phone 4.0.3 LPQ for testing it, and flashed it with cf root 5.4
but after testing i wanted to get back to checkrom and now i have this problem that i can't flash any other kernel! only CF-Root is working , with any other kernel i em ending at the "Triangle"..phone is not booting any more
Click to expand...
Click to collapse
do you wipe cache and dalvik before you flash a different kernel? and maybe format system when you go into recovery might help...and next time make backups
do not worry i am kinda having my own little problem now but i am getting there hehe
Stifler69 said:
do you wipe cache and dalvik before you flash a different kernel? and maybe format system when you go into recovery might help...and next time make backups
do not worry i am kinda having my own little problem now but i am getting there hehe
Click to expand...
Click to collapse
hmm did everything -.-
don't wanna work get always the same problem, no usb storage and cannot flash any different kernel..only cf-root
so_ony said:
problem is i can root my phone with cf root, but after flashing any other kernel my phone boots to the "Triangle" and is stopping there...
Click to expand...
Click to collapse
Hmm... so what kind of messages are you getting in ODIN when you try to flash another kernel?
Logged using an SGS2 type droid while exploring CheckROM V6 quadrant on a research & rescue operation.......
geko95gek said:
Hmm... so what kind of messages are you getting in ODIN when you try to flash another kernel?
Logged using an SGS2 type droid while exploring CheckROM V6 quadrant on a research & rescue operation.......
Click to expand...
Click to collapse
in odin everything is working fine, i got no failor message when i am flashing another kernel, just rebooting i am landing on the triangle part and nothing more..
now i flashed hyperdroid for looking at if it works when another kernel (redpill) is inside another rom, and it worked that my phone is rebooting.. then i thought okay problem is gone and flashed back original LPH firmware and cf-root then after cf root kernel i wanted to flash N.E.A.K kernel and i am landing in the triangle part again .. strange thing, don't know what is happening..something strange with cf-root kernel?
so_ony said:
in odin everything is working fine, i got no failor message when i am flashing another kernel, just rebooting i am landing on the triangle part and nothing more..
Click to expand...
Click to collapse
Ok, but then did you turn the phone off and use the 3 button combo to boot straight into recovery to flash a ROM?
geko95gek said:
Ok, but then did you turn the phone off and use the 3 button combo to boot straight into recovery to flash a ROM?
Click to expand...
Click to collapse
right, going into download modus and then connect with odin, and then flashing kernel, it get's flashed on my phone and will be removed from odin after flashing and phone is booting
so_ony said:
right, going into download modus and then connect with odin, and then flashing kernel, it get's flashed on my phone and will be removed from odin after flashing and phone is booting
Click to expand...
Click to collapse
LOL! Yes I know the phone reboots automatically after the flash. However, I asked if you tried just turning it off and then pressing vol up + home + power and holding those buttons until recovery appears...
geko95gek said:
LOL! Yes I know the phone reboots automatically after the flash. However, I asked if you tried just turning it off and then pressing vol up + home + power and holding those buttons until recovery appears...
Click to expand...
Click to collapse
lol yes
but i have fixed it now just flashed ki3 firmware with pit file and kernel ,
so_ony said:
lol yes
but i have fixed it now just flashed ki3 firmware with pit file and kernel ,
Click to expand...
Click to collapse
But Ki3 firmaware is off! T_T
same usb mount problem
hi,
same problem, but came from Samsung sim-free ICS upgrade (via kies). Then Rooted with CF-Root via Odin. just finished my nandroid and getting all set to download it to my laptop and, arg, can't mount USB drive.
'E:Unable to open ums lunfile (no such file or directory)'
I want to flash Resurrection Remix AOKP which includes siyah kernel, so if I just go ahead and flash the zip, it might give me a chance of fixing this?
or else endup in an endless boot.....
thanks
Right so here is my thing acouple of days ago i tried to go from a rom based on XLPH to one Based on XLPQ. I did the four wipes however on startup it would go into Kernel Panic Mode. I could not access cwm but could get into dl mode so i flashed cf root XLPH and managed to get back to the original rom i started from. It seems that any XLPQ based rom results in the same outcome of Kernel Panic Mode even siyah.Ive tried to go back to stock to start again but the same thing keeps happening.However as a last resort i flashed an original ota based samsung Build i don't now get the Kernel Panic Mode message but a blank screen and it shuts down I've managed to get into dl mode and get back to my original rom any advice.
djseaneq said:
Right so here is my thing acouple of days ago i tried to go from a rom based on XLPH to one Based on XLPQ. I did the four wipes however on startup it would go into Kernel Panic Mode. I could not access cwm but could get into dl mode so i flashed cf root XLPH and managed to get back to the original rom i started from. It seems that any XLPQ based rom results in the same outcome of Kernel Panic Mode even siyah.Ive tried to go back to stock to start again but the same thing keeps happening.However as a last resort i flashed an original ota based samsung Build i don't now get the Kernel Panic Mode message but a blank screen and it shuts down I've managed to get into dl mode and get back to my original rom any advice.
Click to expand...
Click to collapse
unfortunately.. i having same problem..tired of this..please someone help..
i think it maybe hardware i hope not
Been a few people on my forum with the same problem but I seemed to avoid it.
First I made a nandrord backup and passed it to my PC.Then formatted my internalSD(have all important stuff on external anyway)then passed it back to internalSD again with the new ROM.Formated the phone-System,Data,cache in Mounts and Storage and flashed the official ICS from SamMobile.Rooted booted to recovery and then flashed the ROM on a clean device.After that flashed the CF-PROPER kernel cos the CF-Root kernel has the apps to SD and Titanium restore problems.So far all running smooth.
thanks will try that how do i get a nandroid back up to my pc
guys can i install this new XXLPQ ics update manually??...i heard its for the european phones...im in Malaysia...hope it wont effect my carrier phone calls, sms ad 3G network ~~
how did you reformat through cwm and how did you flash the official ics from sammmobile just glad im not the only one with this problem thought it was my fault.
djseaneq said:
how did you reformat through cwm and how did you flash the official ics from sammmobile just glad im not the only one with this problem thought it was my fault.
Click to expand...
Click to collapse
The basics is a must read before any flashing .
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
NEW HERE
http://forum.xda-developers.com/showthread.php?t=1134290
bible
http://forum.xda-developers.com/showthread.php?t=1473577
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
sorry should have put it better i just want to know whether her reformatted in cwm or any other way ie kies.
CWM only .
jje
Sorry had to go to bed.It was late in the morning here.
1.have your nandroid and custom ROM on the internalSD.The wont be touched by a format.
2.Boot to recovery and go to Mounts and Storage and format System,Data;Cache
3.Go back and wipe battery stats.Go back and do a Factory reset.
4.Reboot your device.
It wont boot properly cos you have formatted the system so pull the battery,put it back in and boot into download mode.Now flash via Odin the Official LPQ firmware that you can download from SamMobile and root with chainfires CF kernel.Now flash your custom ROM.
Tryed find a full "odin-version" of a XLPQ, including bootloader?
it MUST include XLPQ bootloader for this to work.
I had Kernel panic when I needed go from Omega V4 to v5.
Odin image with same kernel as needed, root it,
then try install youre new rom.
Good luck man
Thanx guys will try later maybe the idea of messing with the bootloader scares me im gonna try cooza method first.
djseaneq said:
Thanx guys will try later maybe the idea of messing with the bootloader scares me im gonna try cooza method first.
Click to expand...
Click to collapse
Do you have the link to the ICS download?
No ill have a looksee later
pit
if after flashing xxlpq it stops at start screen you need to flash rom by ext4 pit in pit section of odin to repartion.
djseaneq said:
No ill have a looksee later
Click to expand...
Click to collapse
this is the Poland one.If you want a different area let me know.
http://hotfile.com/dl/149514867/aea2f22/I9100XXLPQ_I9100OXALPQ_XEO.zip.html
i had this exact problem too
i tried various methods to fix it
in the end i flashed the main stock lpq as pda and also the kernal and modem in odin and it worked.
yeay it worked so far so good thanks cooza you are a legend probably shut put a sticky in the omega rom thread thanks a lot for all your help.
I was trying to upgrade from 4.0.3 to 4.1.2 and I accidently flashed wrong CWM (v5) instead v6 and it got stuck at Samsung logo, reflashed 4.0.3 and now it gets stuck at the S logo (after start up sound).
Anyone know where I can get the multi-file old-style firmware so I can get this working again?
Thanks in advance!
Use Odin.... If You Already Usingtgen tell me Which file you tried to flash...
Sent from my iPhone using Tapatalk
otester said:
I was trying to upgrade from 4.0.3 to 4.1.2 and I accidently flashed wrong CWM (v5) instead v6 and it got stuck at Samsung logo, reflashed 4.0.3 and now it gets stuck at the S logo (after start up sound).
Anyone know where I can get the multi-file old-style firmware so I can get this working again?
Thanks in advance!
Click to expand...
Click to collapse
Here you got ICS ROMs & LS8.
That's for I9100, make sure you're packing the right model as well.
I managed to get it working again by VOLUP+Power+Menu and going into CWM and restoring from a backup.
But it is rather concerning that if I hadn't of had a backup I would be screwed right now, I use Odin and I was using the thread you posted above, however even after flashing those and even wiping user data, it still boot looped.
otester said:
I managed to get it working again by VOLUP+Power+Menu and going into CWM and restoring from a backup.
But it is rather concerning that if I hadn't of had a backup I would be screwed right now, I use Odin and I was using the thread you posted above, however even after flashing those and even wiping user data, it still boot looped.
Click to expand...
Click to collapse
hummm.........
If you can flash a back up you should be able to flash anything else. I mean, there's nothing wrong with your device.
Are you sure kies is all closed before flashing via Odin?
Try Mobile Odin to flash a stock ROM.
otester said:
I managed to get it working again by VOLUP+Power+Menu and going into CWM and restoring from a backup.
But it is rather concerning that if I hadn't of had a backup I would be screwed right now, I use Odin and I was using the thread you posted above, however even after flashing those and even wiping user data, it still boot looped.
Click to expand...
Click to collapse
Did you try follow the guide here: http://forum.xda-developers.com/showthread.php?t=1108499
It outlines what you did, only it suggests flashing a stock ROM through Odin instead of restoring a backup. Data stored on the internal memory will be lost during process, but it seems you have no way of retrieving it anyway! Give it a go with the stock ROM's link that gastonw linked you.
otester said:
I managed to get it working again by VOLUP+Power+Menu and going into CWM and restoring from a backup.
But it is rather concerning that if I hadn't of had a backup I would be screwed right now, I use Odin and I was using the thread you posted above, however even after flashing those and even wiping user data, it still boot looped.
Click to expand...
Click to collapse
Dude, your device was not "bricked" and it was of no concern. The problem was simply that you flashed a incompatible kernel.
To solve it all you needed to do was flash compatible kernel in download mode using ODIN and you would have then had correct cwm, root and rom would have booted no problem.
Hi sorry my english am gona try to say my problem please if someone understand and can help me. I have a galaxy yp-g1 4.0 intl version and i gave to my caousin the player for a while and when he gave me back the player it was all messed and he dont know what he did to it. i tried to enter recovery and wipe data/restore but when i turn on the player its like i didnt make anything and all is as before, all apps, all data, all photos, all music...
i tried downloading odin and the full restore from this forum for my version and odin says PASS but when the player restart it is the samee! i dont know what more to do. all the time with all apps says were sorry proccess XXXXX fail and i need to force close with all i touch in the screen..
Here are some image maby image are better than my english..
And then this happen wen it finish
When it turns on its all same like odin did nothing and all apps FAIL ALL THE THING I PRESS IN THE SCREEN FAIL ALL! ITS LIKE THIS
I would appreciate the help much
http://forum.xda-developers.com/showthread.php?t=1468213
See if that works.
TheKryptonite said:
http://forum.xda-developers.com/showthread.php?t=1468213
See if that works.
Click to expand...
Click to collapse
Thanks i read that post but i need partion table from another YP-G1 4.0 intl version.. the problem is i dont have no body with exact the same player and i cant repair my partition table manually without that. thats why i ask for help or someone that knows a diferent way to repair device
t0m4s_g1l said:
Thanks i read that post but i need partion table from another YP-G1 4.0 intl version.. the problem is i dont have no body with exact the same player and i cant repair my partition table manually without that. thats why i ask for help or someone that knows a diferent way to repair device
Click to expand...
Click to collapse
It's not even related because your system can mount and format partitions. Have you tried redownloading the file, reflash it with re-partition enabled and wipe data?
zaclimon said:
It's not even related because your system can mount and format partitions. Have you tried redownloading the file, reflash it with re-partition enabled and wipe data?
Click to expand...
Click to collapse
I think is related bicause the man that posted in super soft-bricked did same he flashed with pit file he wiped data he redownload software and nothing worked. And yes, i redownloaded pit file and stock rom G1ZKC5 2.2.1. The first time i flashed was G1XXKPQ 2.3.6 but still the same. nothing work.
t0m4s_g1l said:
I think is related bicause the man that posted in super soft-bricked did same he flashed with pit file he wiped data he redownload software and nothing worked. And yes, i redownloaded pit file and stock rom G1ZKC5 2.2.1. The first time i flashed was G1XXKPQ 2.3.6 but still the same. nothing work.
Click to expand...
Click to collapse
have you tried what recovery said and used the wipe functions? that may do it but i highly doubt it
t0m4s_g1l said:
I think is related bicause the man that posted in super soft-bricked did same he flashed with pit file he wiped data he redownload software and nothing worked. And yes, i redownloaded pit file and stock rom G1ZKC5 2.2.1. The first time i flashed was G1XXKPQ 2.3.6 but still the same. nothing work.
Click to expand...
Click to collapse
The thing is, his device couldn't even get to stock, yours however can but do you only have an error for the setup process or for all apps?
Envoyé depuis mon Nexus 7 avec Tapatalk
goldflame09 said:
have you tried what recovery said and used the wipe functions? that may do it but i highly doubt it
Click to expand...
Click to collapse
Yes i Enter recovery and wipe data/facory and it says finish. when i turn on its all the same like nothing happened
zaclimon said:
The thing is, his device couldn't even get to stock, yours however can but do you only have an error for the setup process or for all apps?
Envoyé depuis mon Nexus 7 avec Tapatalk
Click to expand...
Click to collapse
For all! when device start all proces fail absoluty all.. the thing is device i can turn on android but i cant do anything. when i wipe it like half hour turning on when it turn on begins all process to fail android proces app process and in the top its says repairing mass storage and than again all apps are instaled like viber games and all that. i dont know whats the problem bicause if i made wipe this shouldnt be there..
Someone?? the galaxy player its still the same
t0m4s_g1l said:
Someone?? the galaxy player its still the same
Click to expand...
Click to collapse
Hmm did you try to flash perhaps the HK stock rom and wipe the data, then update to GB to see if it can fix it?
Envoyé de mon Nexus 4 en utilisant Tapatalk
zaclimon said:
Hmm did you try to flash perhaps the HK stock rom and wipe the data, then update to GB to see if it can fix it?
Envoyé de mon Nexus 4 en utilisant Tapatalk
Click to expand...
Click to collapse
can you give me the links? i could try to see if it works
t0m4s_g1l said:
Someone?? the galaxy player its still the same
Click to expand...
Click to collapse
Have you tried using heimdall instead?
Sent from my YP-G1 using XDA Free mobile app
obscuresword said:
Have you tried using heimdall instead?
Sent from my YP-G1 using XDA Free mobile app
Click to expand...
Click to collapse
Yes i did, using heimdall on mac.
Thanks for trying to help
i would say try this flash this through odin PDA http://d-h.st/Ohu then without rebooting flash steves intl kernel http://forum.xda-developers.com/showthread.php?t=1377771
then maybe you will have to flash a pit file from here. make sure you use the PIT section in odin. http://forum.xda-developers.com/showthread.php?t=1389873
DON'T FLASH YET THOUGH. wait till somebody confirms it. I don't have a Player 4.0 so i may be wrong. somebody please say if i'm wrong
Austin68 said:
i would say try this flash this through odin PDA http://d-h.st/Ohu then without rebooting flash steves intl kernel http://forum.xda-developers.com/showthread.php?t=1377771
then maybe you will have to flash a pit file from here. make sure you use the PIT section in odin. http://forum.xda-developers.com/showthread.php?t=1389873
DON'T FLASH YET THOUGH. wait till somebody confirms it. I don't have a Player 4.0 so i may be wrong. somebody please say if i'm wrong
Click to expand...
Click to collapse
Hi, I downloaded pit file several times and several files of pit i find for my Galaxy Player but with no luck, and the second link dosent work for me bicause it is for the Galaxy Player USA version....(mines the intl version GP-G1)
i tried to flash terrasilent recovery that i find here:
http://forum.xda-developers.com/showthread.php?t=1643384
i flashed 1.3v and 1.3.5v and i have no luck. The Player enters in bootloop and i cant do nothing.
i found this other WhiteBeam Kernel that has CWM recovery and i can enter to cwm recovery and wipe data, cache partition and dalvik but never boot into andorid. this is the link where i found this kernel.
http://forum.xda-developers.com/showthread.php?t=1807997
I downloaded iChaOS-TestBuild2iostheme rom and tried to flash it via cwm, it says succes but when i restar it will never boot.
i also wiped everything before rebooting.
I redownloaded Stock Rom from (this is the zaclimon post) http://forum.xda-developers.com/showthread.php?t=1531850 and flash via odin and pit file. Then make wipes. then it shows all the error message u can see the image in my first post of this thread. It BOOTS into android but with all the information like if i never did something to the player. (all games, photos, apps and folders) but all apps and system apps when the system starts shows message "force close" to all apps and all system apps. (u cann see image in first page of this thread) i dont know what is happening to this player. its like it doesn't want to wipe nothing.
Its like freeze with all things since the day the player damaged.
Someone with some other ideas? am frustrated i dont understand.
well this is an international kernel not? http://dl.dropbox.com/u/59125319/STeVEs-3.0-EU.tar
it says EU for European. but that's the same thing not
also here would be the right pit file http://www.mediafire.com/?u4fsajrqsw3uk71
Austin68 said:
well this is an international kernel not? http://dl.dropbox.com/u/59125319/STeVEs-3.0-EU.tar
it says EU for European. but that's the same thing not
also here would be the right pit file http://www.mediafire.com/?u4fsajrqsw3uk71
Click to expand...
Click to collapse
I flashed that kernel... enters in bootloop such as terrasilent's.... thanks for helping
Hi,
My I9100G is now on CM10.1.3 with CM stock kernel, everything is working great, but whenever i try to flash a different ROM or kernel, i get stuck on the bootscreen!
Except for samsung stock ROM and CM which work as well.
I have tried the following:
1- Wipe everything(data, cache, dalvik cache, format system) and do fresh installs.
2- Flash JB bootloader.
3- Un-root and re-root.
4- Try different recovery (CWM, TWRP).
5- Nand backup and restore works fine.
6- I forgot a couple of things, probably.
I miss trying out new ROMs and kernels, help an addict get his juice :silly:
I'm using ROM and kernel CWM cleaning scripts and I hadn't had any bootloops after ROM flash. I highly recommend this. Google ''i9100 ROM wipe script''. I also use the kernel wipe script, from the same xda thread.
Sent from my GT-I9100 using Tapatalk
JB Bootloader? Not enough flash a kernel with root? However if he does not work try to put a ROM stocks and to send it in for support service.
I do hope you're flashing stuff meant for the I9100G, and not the I9100.
Still problem persists
f-r said:
I'm using ROM and kernel CWM cleaning scripts and I hadn't had any bootloops after ROM flash. I highly recommend this. Google ''i9100 ROM wipe script''. I also use the kernel wipe script, from the same xda thread.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Found a great thread :[CWM UTIL] Hawker's Wipe Scripts (S2 GT-i9100)
Tried all scripts as i have become desperate, still to no avail.
But thanks, that will help in the future, provided i solve the problem at hand
-Marco said:
JB Bootloader? Not enough flash a kernel with root? However if he does not work try to put a ROM stocks and to send it in for support service.
Click to expand...
Click to collapse
Service will cost a lot of money as Samsung's service in my country (EGYPT) are greedy ********* and also their service is not professional.
Besides, if i send it, what will i send it for? Stock ROM already works!
immortalneo said:
I do hope you're flashing stuff meant for the I9100G, and not the I9100.
Click to expand...
Click to collapse
Thanks for your concern, i am well aware of the difference between the two variants
vima91 said:
Service will cost a lot of money as Samsung's service in my country (EGYPT) are greedy ********* and also their service is not professional.
Besides, if i send it, what will i send it for? Stock ROM already works!
Click to expand...
Click to collapse
If you already changed the recovery, you've voided any warranty, Samsung won't do anything for you anymore.
You're on the dark side now
Sent from my GT-I9100 using xda app-developers app
warpgamer said:
If you already changed the recovery, you've voided any warranty, Samsung won't do anything for you anymore.
You're on the dark side now
Click to expand...
Click to collapse
He can always flash stock firmware using Odin.
To OP: It's really bizzare. Using wipe scripts prepares the device for flashing any ROM. I'm assuming that no download errors occurred (MD5 check is ok), that the ROM is matching your phone's model and that you're using a proper recovery.
Flash a different kernel (cwm or twrp based) and flash the ROM with it.
Sent from my GT-I9100 using Tapatalk
f-r said:
He can always flash stock firmware using Odin.
To OP: It's really bizzare. Using wipe scripts prepares the device for flashing any ROM. I'm assuming that no download errors occurred (MD5 check is ok), that the ROM is matching your phone's model and that you're using a proper recovery.
Flash a different kernel (cwm or twrp based) and flash the ROM with it.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I have sent my phone a couple of times for service before the warranty expired, reset binary counter and flashed stock ROM, no problem.
MD5 checksum fine, ROM matching phone model, recovery i have been using for a while.
Will try TWRP and report back, thanks
So i cleaned up the system and flashed the Blazing safe kernel and now it got kinda interesting...
After using the scripts to clean everything up, then i flashed the kernel again to double check i had recovery, i tried to flash the ROM i wanted which is Cyanfox, it gave me an error.
Updating bla bla bla....
.
.
.
This package is is for "i9100g,GT-I9100G" devices;
E:Error executing updater binary in zip '/emmc/......'
Error flashing zip '/emmc/bla bla'
Updating partition details...
After that i tried the SLIM ROM 4.2.2, frankly i don't remember where i got it from as it was sitting there for some time.
Anyways it worked and that's weird...cyanfox was supposed to work as other users say it worked for them.
Also when Slim was flashed it had CWM, which i opened and tried to flash cyanfox with it...and it flashed without errors but still stuck at boot logo screen!!
What's the problem here?? :silly:
So, anyone?
Is this in the right section in the first place?
My phone is a GT-I9100G model.
vima91 said:
So, anyone?
Is this in the right section in the first place?
My phone is a GT-I9100G model.
Click to expand...
Click to collapse
Try asking here mate. :good:
Solved
Thanks, but i found the solution to my problem.
Actually i had multiple problems:
4.4 ROMs will flash but will not boot.
Some ROMs will not even flash giving error in CWM (status 6, status 7 ).
Regarding the first problem, i found a thread mentioning that Kitkat ROMs are not all supported by CWM (Sorry i can't seem to find it again :/ ), and that a particular CWM version 6.0.4 will solve that. Too lazy to search for and get, and came across another solution, where aidfarth released his version of a Kernel supporting 4.4 Kitkat, with TWRP instead of CWM which solved the status 7 error.
Further reading is for the other two error solutions.
So i went on and tried to flash that kernel, giving me the status 7 error in CWM, which brings me to the next error.
Regarding the second error, status 7 in CWM, it could be solved by manipulating a script in the ROM or zip in general that you want to flash, this link will demonstrate, it's what i followed.
So i followed, edited the ZIP file and whatnot, then i tried to flash it in CWM, then got the status 6 error.
This will require the same steps as how you solved the status 7, but it has to do with UNIX encoding, this link is what i followed.
Thanks all for replies.