Galaxy tab 10.1 (Wifi) stuck at samsung Boot Logo - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

I have a rooted galaxy tab 10.1 (Wifi) p7510 from the US
I wanted to flash the pershoot kernel on my galaxy tab so that I could over-clock my processor and so I used ROM Manager to create a back-up and then used CWM to install the kernel. The install went fine and the device booted an was working flawlessly.
Then I decided to go back to my previous stock kernel and thus I booted into CWM, and clicked Backup/Restore and picked the back up I created. At the point where it is restoring data, it quits and says error restoring data and when I tried to boot the tab, I got stuck at the Samsung Boot Logo.
I tried wipe data,cache,Dalvik and nothing work.
I even tried advanced restore and managed to restore all components of the backup except the data.. Still no luck.
I'm downloading a custom ROM now (starburst) but how will I even be able to place it in the root partition if the galaxy tab can't boot into a usable state..
P.S. You may have noticed, I'm a noob so very detailed guides would be very good
Thank you

minamfm said:
I have a rooted galaxy tab 10.1 (Wifi) p7510 from the US
I wanted to flash the pershoot kernel on my galaxy tab so that I could over-clock my processor and so I used ROM Manager to create a back-up and then used CMW to install the kernel. The install went fine and the device booted an was working flawlessly.
Then I decided to go back to my previous stock kernel and thus I booted into CMW, and clicked Backup/Restore and picked the back up I created. At the point where it is restoring data, it quits and says error restoring data and when I tried to boot the tab, I got stuck at the Samsung Boot Logo.
I tried wipe data,cache,Dalvik and nothing work.
I even tried advanced restore and managed to restore all components of the backup except the data.. Still no luck.
I'm downloading a custom ROM now (starburst) but how will I even be able to place it in the root partition if the galaxy tab can't boot into a usable state..
P.S. You may have noticed, I'm a noob so very detailed guides would be very good
Thank you
Click to expand...
Click to collapse
How long was it stuck on the samsung logo? If you didn't let it sit for at least 45 minutes, try that first.

So I left it for about 10-15 minutes and it worked.... Barely working though, almost everything crashes, very slow and choppy.. Looks like it's heavily corrupt.. At least now I can copy the custom ROM into the root folder. Is it safe to do so now??
And can you also post me a link to a .zip stock ROM for my tab??
Thanks a lot!

I had the exact same problem and I did following steps to get the tab working
1- find a stock from that flashable with Odin ( I used stock kl2 rom, can be found on tab 10.1 developer forum)
2 - flash the rom (.tar file) via Odin ( same as flashing cwm)
3 - after the flash I was still in boot loop no worries, go to recovery mod ( hold power + volume down then volume down and then volume up)
4 - wipe everything ( simply used very option that says wipe on it)
5 - restart and done! Everything is back to normal again
Only thing was I lost all my data pics etc but I got my tab working again
Btw not claiming these steps are essential, perhaps someone could come up with a more comprehensive method. This is just the way that I was able to restore my tab.

That's what I'm down to with my Tab. Flashing w/o CWM and/or unrooting to see if the /data error clears up. At least I'm not dead (I hope) to the point that I can't back up my SD card to external storage.
I can't restore any nandroid I have w/o the /data error and flashing custom ROMs gives the same result (everything FC's) except no /data error.
Wish I'd brought it to work today so I could tinker w/ it.

Related

[Q] Samsung Galaxy Tab 10.1 bricked?

Hi I hope someone can help me. I have searched this forum but could not find a similar situation to what I ended up in...
I tried to install a custom ROM on my Galaxy Tab 10.1 using the CWM/Odin.
This seemed succesful but was not, it did not start but was stuck in the Samsung logo.
So I tried entering the CWM and download and install an original Samsung ROM. I can get it into CWM, but CWM cannot enter the download mode only the other mode.
In this mode all options are available:
- reboot
- apply update from SD card
- wipe data/factory reset
- wipe cache partition
All options have been tried without any luck. In the update from SD card it only shows ...
or Error opening /data/media: no such file or directory
Any ideas how I could get this directory back or put a ROM on the Samsung in this situation.
Odin does see the Galaxy but as I cannot get it into Download mode I am unable to download anything to it.
All or any suggestions are very welcome!
1. CWM (Clockworkmod) =! Odin.
In the beginning, you don't have CWM installed. You install CWM, by flashing CWM on your Phone with odin.
Odin is the Windows Programm, that is used to flash Recoveries/ROM's/Kernels onto your device.
2. it seems, that you still have the default Samsung recovery installed, that meand CWM is not yet flashed on your device.
If the flashing process was succesful (I suppose it was done with odin), but you can't get past the Samsung logo, that means, you probably flashed a rom, that isn't made for your device(ex. a GTab 10.1v Rom).
If you DID flash a wrong rom, then you probably ****ed up the partition table and removed the Download Mode(Odin Mode). Strange thing is, that you still have the Stock recovery.
Could you please redirect us to the rom you downloaded?
Also, did you flash with a repartition on and/or a .pit file?
hi Kaukassus,
thanks for the reply.
OK I checked the files and what I did.
I think I totaly screwed this up. It was a theme I tried to install the AOSP_HC_v1.3_3G+KI1.
I rooted the Tab. So first when the Tab was still functioning installed it on the TAB via USB.
Than tried to install this via update from SD card.
This appeared to work initially. But hung at the start.
After that I tried (via Power Volume Up) wipe data/factory reset.
No luck.
After that I tried wipe cache partition followed by wipe data/factory reset.
And this is what I got now..
Bad news is the Tab was/is a X-mas present and I managed to screw it up even before I officially got it !-(
The valuable lesson you're learning is that you need to be aware exactly what things you're flashing and their compatibility with your device and the software it's running.
You haven't mentioned what specific device you're using or the specific things you've tried to flash (as kaukassus pointed out, direct links to threads where you got the files you tried to flash are best). Not sure if you're aware but not all GT 10.1's are equal; there are several models out there and each and every ROM is specific to a particular device. Verizon LTE GT 10.1's like mine can't take ROMs from any other device for example, it's likely that the new T-Mobile 4G one's wont be able to trade ROMs with Verizon ones . . you get the point.
When you say you installed via USB what exactly did you mean? If you simply copied a zip file via USB to the tab to flash in recovery mode that's not installing; the flashing from recovery may be but the file copy operation is not. If on the other hand you pushed things via ADB or you flash using Odin software then that's a different story.
Best thing to do at this point is to properly identify your device, look for a stock recovery image for Odin and flash that via Odin to your device. At that point you can start from scratch again to build what you want.
Thanks Muzzy996.
You are right. I was in a rush and should have taken more time.
However I am getting somewhere. Managed to get in download mode twice today, don't ask me how. This Tab just will not go into download mode!
However I did not have the stock ROM ready to be installed.
Will keep you updated.
i have the same problem. i just rooted my device was going to overclock. decided to save my rom with rom manager. saved it device went to reboot now the samsung galaxy 10.1 shows up screen goes dim then shuts off, and will cont. do this. i can get into download mode but recovery will not work. is there anyway to download my stock rom. im using verizion 4g 10.1 any help would be great, btw sorry to thread jack
Problem solved.
Managed to get it in download mode again and install stock rom via Odin.
Appeared to work fine. But kep switching off, even after full night of charging.
This morning Tab was dead after recharging whole night..
Got it back on by holding volume down and power button down.
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
I crashed both my I9000 (galaxy s) flashing custom roms and my tab 10.1 (editing some system files) both ended up just looping but managed to get both back. I purchased a small connector of ebay £1.59 that has just a resistor accross pins 4&5 331k I think anyway plugging this into most samsung devices boots them into download mode. Even before getting my resistor I managed to get things working I think that you'd have to be properly unlucky to really brick a samsung I've flashed both my devices with all sorts of crap with my little resistor I just reset them with ease.
Brian
h2bmess said:
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
Click to expand...
Click to collapse
did you ever resolve this issue? i am currently faced with the same issue.

[q] please!! Need help with cwm restore data!!

So I had my Epic 4g Touch running on ics 4.0.4 root and it was working totally fine, UNTIL....I decided to install the cyanogenmod 10.1 rom to see how jellybean 4.2.2 is all about. I followed the instructions exactly as they were depicted on a youtube video, and used clockworkmod recovery v5.0.2.7 to backup my current rom (ICS 4.0.4). The 4.2.2 ran totally fine, until I tried restoring my data from the old rom I had before (I hope Im not confusing anyone). After restoring the data, the jellybean rom would stay stuck in the boot up screen. Then I tried just restoring the entire rom from backup, my phone would just boot right back into custom recovery mode after completing the backup restore. I then tried restoring my phone to the old 4.0.4 root that I had before, but I would just run into the same problems whenever trying to do a full backup restore or just a data restore (phone just cycling back into custom recovery mode)
Is there anything I could do???? I can still look into my phone's eternal sd card and see that the recovery files are still there. I just need to restore my phone back because it would be a lot of trouble finding contacts, redownloading apps, as well I had some vital memo pad files that I really need to get back for my business. IS THERE ANY WAY I COULD RECOVER MY PHONE DATA???? PLEASE HELP!!!!!
Thanks guys. I found a solution. I just kept the new cyanogenmod 10.1 and used the nandroid manager app to restore all of my apps and the rest of my data individually. Worked great!!

[Help] Bricked my 10.1v - Recovery won't install

Hi there,
I hope there ist somebody here who could help me.
I was about to install the lates CyanogenMod on my Tablet and kind of screwed up.
My tablet was rooted, but had some problems installing a Recovery-Image. So I installed the stock Rom (3.0.1) and tried to flash CyanogenMod again. Installting everything via Odin works fine, but when I try to boot into recovery it won't work. So I tried to install the recovery image from the CyanogenMod-Wiki via fastboot. At this point the Tablet schows following error:
Code:
Failed to process command getvar: partition-type : recovery error (0x2)
I had the problem before, when my tablet was rooted, that I could not install the recovery via the Rom Manager...
So I thougt that I might have screwed up my partitions at some point. I went on a hunt for the Pit file and then to install stock Rim with the Pit file again. Well I did find a Pit file which is supposed to work for my tablet. But now everything is screwed up. It will not start anymore at all. Either it ist stuck on the Samsung boot screen or it shows an Android with the exclamation mark and doesn't do anything anymore...
This ist the Pit file which ist supposed to work:
Code:
android_fastboot_emmc_full_p4_16G_32G.zip
Has anyone got a working Pit file für the P7100?
Does the Pit file even fix my partition problem?
Is there a way to manually partition the tab and if yes has anyone got a guide?
I hope there ist someone here that can help me. I would really appreciate it! I know I screwed up badly on this one :crying:
Thanks to everyone taking time to help me in advance.
You might try doing stock image to open if you can get to the recovery and just do a full wipe. ....or try opening your stock recovery if you can and just do a factory reset wipe everything
Sent from my SPH-L900 using xda premium
iallmost said:
You might try doing stock image to open if you can get to the recovery and just do a full wipe. ....or try opening your stock recovery if you can and just do a factory reset wipe everything
Click to expand...
Click to collapse
Thanks for your quick response.
On rare occasion I do get into the recovery and did a full wipe of erverything. I even tried to format all the partitions. On some partitions it just said, that it can not format them. I also reinstalled the stock rom a couple of times as well.
Nothing of this worked so far. I am always stuck on the boot screen or the android with the exclamation mark (after I factory reset ist or reinstalled the stock rom)
Edit: When I boot (not flash) the recovery via fastboot I can get into the downloaded recovery from CyanogenMod.
I tried a little more yesterday to revive my tab...
When I flash the stock rom in download mode via odin, it starts afterwards to a screen with the android and the exclamation mark. At this screen I can press the power and volume + button a couple times and then I am in the stock recovery. Tried every option in there, but it just wont helpt. Afterwards it ist stuck on tying to boot into recovery.
When I don't press the power and volume + button and just wait after flashing stock rom, the tab will reboot after a while and gets into a boot loop with the samsung boot screen...
Tried flashing a recovery rom from clockwork as well, but afterwards I am not able to boot into it. My guess is, that the partitions are screwed up and therefore the tab can not boot... Is there a way to manually partition my tab? Can anyone post the partition table for the P7100 (Galaxy Tab 10.1v)?
Oh yeah... Everything started after I flashed the last nightly from CyanogenMod. That was the first time the tab got stuck on the boot screen and ever since can not get past it.
I scared that I completely broke my tab now and wont be able to get it back :crying:
If your thread name is correct you have a 10.1v if I am correct the code name for it is P3 but the Odin file you posted I assume is for the P4 because of its naming. If it is so the you have flashed the wrong stock firmware image for your tab. You have used 10.1 Wifi and 3G model firmware on a 10.1v. Your tablet could be seriously screwed up but there is still hope if you can get into download mode.
Sent from my HTC One using Tapatalk 4 beta
**Press the thanks button if I have helped you.
WildfireDEV said:
If your thread name is correct you have a 10.1v if I am correct the code name for it is P3 but the Odin file you posted I assume is for the P4 because of its naming. If it is so the you have flashed the wrong stock firmware image for your tab. You have used 10.1 Wifi and 3G model firmware on a 10.1v. Your tablet could be seriously screwed up but there is still hope if you can get into download mode.
Click to expand...
Click to collapse
You are right. I have the P3 and flashed the P4 PIT-file. I have read on a couple sites, that the P4 ist as well the right one for the P3 and haven't found another PIT-file just for the P3.
I only started using the PIT file after my bootloop problem started, which was directly after flashing CyanogenMod (nightly). The version I downloaded was supposed to work all right on my tab, but did screw it up. Do you have any idea which part of my tab could be screwed up and what I could try?
I think it is the partitions and I flashed the stock rom for the 10.1v (3.0.1) a couple times (with and without the P4 file)...
I am getting all right into download mode, but can only get into the recovery directly after flashing the stock rom. After one mor restart I can't access the recovery anymore...

Unknown path to /sdcard

Hey guys! I had recently installed an Android 4.5 rom on my Samsung Galaxy S i9000, but I didn't really like it, so I went back to clockwork mode and restored the backup (which I am pretty sure I had saved prior to installing the rom). What happened then was that I couldn't power on my device. It literally gets stuck on the Samsung Galaxy I9000 startup screen. I can however access download mode and I can access clockword mode recovery. BUT, when I try to install another update with clockword mode recovery or trying anything on cwmr for that matter (factory reset, cache reset, anything...), I get the error message: Unknown path to /sdcard and I am stuck at this. Can anyone tell me how to fix this issue? Please, I need help quickly!
I would just restore with official firmware via Odin and restart the process. This will set everything back right so you can have a fresh start. http://forum.xda-developers.com/showthread.php?t=1102881

Galaxy S3 - need help with custom rom

Hi all
I hope that I am posting in the correct place
I need help with my Galaxy S3 SGH-T999
Recently the phone died on me, it was stock rom and with the updates through some of the apps, the phone stopped working correctly. I don't use the phone for making calls, etc, but need it for pictures and a few other apps. The phone is from T-mobile.
I tried to reset the phone and that worked until all the updates were back on and then back to the same problem.
So I decided to put on a custom rom on the phone.
I have tried the following roms:
cm-14.1-20161225-NIGHTLY-d2tmo
I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME
RevolutionaryS5-V3
Slim-d2tmo-6.0.1.alpha.0.1-UNOFFICIAL-20160516-1346
I first installed CWM recovery and then transferred the roms over to the external sd car (also the internal card), went to boot manager (vol up) and installed the files.
It looked like the installation worked but when selecting reboot, the phone would not come back on.
I then loaded up Kies and reset the phone back to factory defaults and only then does the phone load back up after reboot.
Every time I try the custom rom - I run into the same problem
At first I thought the phone was bricked and found info about the jtag and then found something about using an SD card with the following image installed on it - tmobile-T999_4.3_debrick
With the SD card in the phone I can boot to either menus and also able to get the phone to boot to the slim-d2tmo rom. But when I pull the SD card, the phone won't boot. Nothing, no power, nada
I am not sure what I did wrong, followed the direction on the site and thought I did it correctly.
Not sure if I deleted some file, or partition needed or what. I would greatly appreciate some help with this.
Also I would like a custom rom that is stable and fast. I don't need all the bells and whistles but one thing I would like and that is for the camera to be able to take pictures using voice. I know the stock rom allows for this. Not essential but preferred.
Please help with detailed instructions.
Thanks in advance.
It,s amazing
Please elaborate. What's amazing.
Boot into download mode and confirm the model # of the phone. I see you tried to flash I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME which not for the the T999, it's for the gt-i9300.
I want to flash Ressurection Remix on my Samsung Galaxy S3.
I tried flashing twrp recovery through Odin 3.07, but, it didnt work. I even tried Odin 3.85.
The Android System Recovery 3e, simply refuses to budge.
Please advice.
Rraayy8 said:
I want to flash Ressurection Remix on my Samsung Galaxy S3.
I tried flashing twrp recovery through Odin 3.07, but, it didnt work. I even tried Odin 3.85.
The Android System Recovery 3e, simply refuses to budge.
Please advice.
Click to expand...
Click to collapse
OPen Odin, uncheck everything except f reset time. Flash TWRP. When you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, replace the battery, boot directly into recovery.

Categories

Resources