Related
Is it just me or is anyone else unable to roam on verizon towers after the new rom/radio upgrade (3.16/3.27)? I get a recording while roaming "Welcome to Verizon Wireless, We're sorry, we're currently unable to authenticate your phone, Please try your call again. If you continue to experience problems please hang up and dial #8899 from your wireless phone"
Any help is appreciated.
Thanks
What PRL do you have?
I never tried making calls but I don't roam on their towers anymore when it comes to data. I just get the triangle and 1x and no web browsers will let me connect to any sites. I kinda just gave up on it since I only needed it in the DC Metro.
I can roam with the new rom. im using prl 60610 and data roaming works as well.
kind of ironic because it didn't work before for me
1X roaming works on Alltel and VZW with 60610 and 3.x ROM here, but EvDO roaming is a no go on Alltel, even though it works fine with 60610 and 2.x ROM.
I guess you are not the only one having the problem. it's a no for me for both prl 60610/60611.
However I am only having the problme at home. I can roam onto vzw at different locations (voice and 1x data) $%^%^&#!$#@!$
People say it may have something to do w/ a-key which is blank on my phone ...
TopGun2000 said:
I guess you are not the only one having the problem. it's a no for me for both prl 60610/60611.
However I am only having the problme at home. I can roam onto vzw at different locations (voice and 1x data) $%^%^&#!$#@!$
People say it may have something to do w/ a-key which is blank on my phone ...
Click to expand...
Click to collapse
Using PRL 60610. I downgraded my phone back to radio 1.40 and it worked fine but it will not work with the new one. I guess roaming had to be given up for GPS.
Problem Solved. Seems like Sprint's System wanted to do the PRL update themselves for record purposes because after I got the rep to shoot a new prl (60611) roaming worked. I then downgraded to 60610 (best one for me) and viola it stuck. everything is working now.
keeepinitgansta said:
Problem Solved. Seems like Sprint's System wanted to do the PRL update themselves for record purposes because after I got the rep to shoot a new prl (60611) roaming worked. I then downgraded to 60610 (best one for me) and viola it stuck. everything is working now.
Click to expand...
Click to collapse
Ok, so how did you fix this again? Can you give me the current setup of your phone or the steps you took to get to where you are?
Here is what I have done so far:
- Flashed from 2.17/1.47.1 to 3.16/3.27 and got the no Verizon roaming issue you described.
- Figured it was an issue with the new ROM, so I then downgraded back to the stock 2.17/1.47.1 ROM from the HTCAmerica website. (The downgrade wiped all my settings for MDN and MSID) However, the issue persisted.
- I updated the PRL to 60611. Still no luck.
- Called Sprint, who initiated an over the air PRL update of their own to 60611. Still no Verizon roaming. Sprint says they are "investigating" and will get back to me, whatever that means...
The only other thing I can think to do is to downgrade again back to 2.09/1.40.
Also another question, when you view ##778#, does your phone show anything on the "A-Key" page under the "Authentication Key" setting now that you have roaming working? Mine is currently blank, and I have read a couple threads talking about needing to figure it out, but those users all seemed to be Verizon customers. I would be interested to find out if Sprint customers have that setting or not.
This issue is driving me nuts, and any help is greatly appreciated.
Call sprint technical support and tell them you need an "HLR Reload". If they don't know what this is, ask to speak to someone who does.
aatreya said:
Call sprint technical support and tell them you need an "HLR Reload". If they don't know what this is, ask to speak to someone who does.
Click to expand...
Click to collapse
Wow. Genius! Got Sprint technical support on the phone and asked for the "HLR Reload." The guy knew exactly what I was talking about and was able to do it right away. I am now able make calls and get data while roaming (currently using 2.17/1.47.1).
Thanks again!
glad to know it worked
rfrankli said:
Wow. Genius! Got Sprint technical support on the phone and asked for the "HLR Reload." The guy knew exactly what I was talking about and was able to do it right away. I am now able make calls and get data while roaming (currently using 2.17/1.47.1).
Thanks again!
Click to expand...
Click to collapse
wow, now i know what i need to do w/ my 3.16 rom
edit: got a call from spint. the tech guy said that he found an authentication failure on my account and reset it. will test the roaming again when i get home. he also had no clew what the "HLR reload" is...
edit2: whatever reset sprint did at their end seems to work. voice/1x roaming is working now, still no evdo though.
Still wont work for me *sigh*
aatreya said:
Call sprint technical support and tell them you need an "HLR Reload". If they don't know what this is, ask to speak to someone who does.
Click to expand...
Click to collapse
I called and had them do this, but i had no luck. Still no EVDO roaming in places where there should be. I can make and recieve roaming call and data roam in 1X but evdo is gone. This is on both the 60610 and 60611 PRL. EVDO roaming worked on both PRL's with the 1.47 radio and 2.17 rom.
Any more ideas?
well I thought I didn't have these problems, but now I'm not certain. I don't think I've ever been able to EVDO roam on verizon, at least not sice I started paying attention which was already after moving to a 2.17 with 1.40 radio and orginal PRL. I know verzion has evdo in this area, but sprint doesn't. Maybe there is no agreement here for evdo becuase of that? I guess it couldn't hurt to try this trick and see if I get it.
I found more problems using 3.16. I did encounter the roaming authentication error. So I called, got the HLR reload. That made things MUCH worse. Now nothing works. My MSID and whatnot are all correct and I see signals, but can't make calls or data connections. Sprint tried some things but nothing worked. I'm going to do a hard reset and see what happens.
Sprint was surpisingly willing to work with me knowing that I am using the test rom though... but in the end still suggested I revert to an official rom when nothing worked out.
Anyway, not sure I'd reccomend the HLR reload on the 3.16... try at your own risk.
holy crap
sorry to hear that
if you get it figured out, lemme know what fixed it.
I suspect sprint just hit the wrong button. I hard rest... still no dice, but I noticed that dialing *2 does work.. normal numbers and network don't. Seems like an authentication issue. I doubt seriously it has anything to do with the rom, but I just flash 2.17, casue otherwise I don't hink I'll get far with sprint.
Now when I try to make it call it tells me the phone has not been activated. (with 3.16 I just got the call end dings imeediately)
SO when I fix this and flash back to 3.16, will I dare to try this again after roaming gets broken again?... tough call.
Edit... still need to fix MDN and MSID in the 2.17 .. more soon.
Edit: fixed MDN and MSID in 2.17... now having the same problem as in 3.16... ding ding ding... no call. Looks like I have to call sprint again.
ON the phone with sprint now. Have rebooted for them a couple of times. This guy is still stumped and he doesn't seem generically ignorant.
I started a new thread for my issue.
http://forum.xda-developers.com/showthread.php?p=1881522#post1881522
You might want to read it before doing any HLR updates in 3.16 though. I'm on my third rom today and a few hours with sprint tech and I still can't make calls.
(EDIT
SOLVED... see above thread. It seems they messed me up badly when they did the HRL reload... however.. it doesn't have to be done badly... at least now we know the fix if it happens to someone else.. so don't let my experience stress you too much. Now to upgrade roms again.
and voice roaming works now..
Roaming not working
ahhh!!! after the upgrade, i cannot roam on vzw...
Called and spoke to several reps... no one knows what HLR Reload is... according to them turning the phone off and taking out the battery for a few minutes will force the HLR reload....
I don't know what to do.... These reps are impossible to deal with.. Anyone have any suggestions?
How do I change the PRL version on the Thunderbolt? I have version 13004 and my wife phone has version 15008, yet I have a much better signal than her. When the phones are next to each other I have 3-4 bars, while hers has 0-1. I remember reading *228 ruins the sim card, but correct me if I wrong. So is there any way to do this? FYI, I rooted both phones with the same files, but I don't know if that has anything to do with the PRL. Thanks in advance.
kxs783kms said:
How do I change the PRL version on the Thunderbolt? I have version 13004 and my wife phone has version 15008, yet I have a much better signal than her. When the phones are next to each other I have 3-4 bars, while hers has 0-1. I remember reading *228 ruins the sim card, but correct me if I wrong. So is there any way to do this? FYI, I rooted both phones with the same files, but I don't know if that has anything to do with the PRL. Thanks in advance.
Click to expand...
Click to collapse
there is currently no way to do this
*228 doesent work on these phones
DS36 said:
there is currently no way to do this
*228 doesent work on these phones
Click to expand...
Click to collapse
So is the PRL in the radio of the downgrade-ruu I used to root the phones, or is it just the way the phone comes out the box and connect to the nearest tower? I ask because I already returned her first phone do to the same kind of signal issues. So is it something going on during the root process and downgrade of the firmware?
Can someone more experienced than me, please help me with this?.
I have an AT&T Atrix. I tried flashing some Latin America radios to it, like Retail Brazil and Personal Argentina ones (sorry, I can't remember the radio version number). They flash fine, and I get full signal and UMTS connectivity, but I don't have internet access. Phone shows 3G connectivity in the status bar, but it won't upload nor download data.
The reason I want to use these radios its because they were developed to be used in my area.
I can't understand why these radios kill my internet connection when other radios like the 01.97.00R works with no issues.
So, please, can anyone help me to understand why I don't have internet access with these radios?. Is there any trick I can do to fix this issue?.
I'm using the stock 4.1.8.3 radio (N_01.77.15P) now since it seems to be the most stable.
Thanks in advance.
Bump.
Please people!. Topics like "Why my Atrix is black?" gets more replies than my questions.
I'm really dissapointed. This is the fifth time I ask a question and noone gives a damn.
Now you see why people post questions in the development forum.
This is the rhythm of the bump!.
Btw, why is the Atrix black?
Dude, you had it coming. Lol!
mistadman said:
Btw, why is the Atrix black?
Dude, you had it coming. Lol!
Click to expand...
Click to collapse
Don't worry, it was a joke afterall.
Whipon, did you get your atrix fixed?
Whipon, Lograste arreglarlo?
Sorry to ask the obvious, but did you got your Access Point Names correct?
AT&T branded phones will have to manually get the AP configuration when used outside of AT&Ts network.
Let me know!
fernandodistinto said:
Whipon, did you get your atrix fixed?
Whipon, Lograste arreglarlo?
Click to expand...
Click to collapse
No, I don't know how to fix it. I'm using the stock 4.1.8.3 radio.
Rayan said:
Sorry to ask the obvious, but did you got your Access Point Names correct?
AT&T branded phones will have to manually get the AP configuration when used outside of AT&Ts network.
Let me know!
Click to expand...
Click to collapse
My APN settings are fine. I've switched radios through RSD Lite lots of times, and my APN settings remain there. There's no need to modify them.
I've manually configured my APN when I flashed 4..1.8.3, and its correctly set up for my carrier. Using 01.87.00R or 01.97.00R radios, my data plan works perfectly. But when I tried to flash some LA radios like Personal Argentina or Retail Brazil, while the 3G icon is showed in the status bar, I have no internet connection.
So I was hoping someone with more experience could help me make these radios work with an AT&T Atrix. Current stock radio works fine, but my signal strength suddenly drops very often, and sometimes I have no data and I have to reboot the phone.
Hey guys, I've had my Note for a while now and always came here for any questions (all of them previously have been answered until now)
I have CWM on my phone with the stock ROM and a different kernel on it.
While in an AT&T store the other day, one of the workers was explaining how to flash a att radio over.. So far, I have found no radios for it. He was telling me about an att radio that you could flash over (a modem radio) that would give you constant 4g LTE with att. I tend to have constant 4G HSPA+ but would love to test it on LTE speeds.
My question is, does anyone have a link to downloading the radio.
And does anyone have a link or quick explanation on how to flash the radio over?
He lied dude. You have to have lte in your area. If you don't, then it doesn't matter which modem you have. Gotta love how these guys have no clue how to do their own job(no offense to any reps that know how to do their job).
Go here for modems
http://forum.xda-developers.com/showthread.php?t=1709525
Hey guys... I just picked up a
SGH-i717
v 4.0.4
Black Star V LF6
LTE Sim, LTE phone, downtown Toronto
I just picked the phone up on the weekend.... It's my first unlocked phone and my first rooted phone. I can't seem to get a network connection (I'm with Fido).... initially I tried a number of APN settings as I browsed through various threads on APN settings for Fido, Android and Galaxy Notes. Over the weekend I had connection of approx 1 to 2 bars, and was at least pulling light bandwidth off the edge network. I called Fido last night to have my network settings reset, and since them I haven't been able to get on my network. It seems to jog between no connection, 1 bar and 2 bar signal strength. Where before it said it was on the edge network it now does not connect to a network.
Calls to Fido show that everything is set up ok from their end; they can't support a non-Fido phone, and they say that they can't guarantee I'll get more than 2 bars connection on any non-fido phone. I was making calls & texts from the phone on the weekend whereas now, following the network reset from Fido, I have no connection. Yet when I Reset to Default the APN settings it populates the fido LTE apn without issue.
I'm lost... could someone please help me out here? I have no experience with either rooted phones or unlocked ones... and my furious googling and thread browsing just seems to be hitting the same recycled threads.
'
Where I'm left is now it's saying 'Not Registered On Network' regardless of the APN setting I use.
You need to check your baseband, or modem. And verify you have the correct one for the fido network.
I Dont know which radio image is going to work for you, but it sounds like the rest of the device is fine.
Check in the general section, and open the "super everything" thread.. There you will find many solution threads, and possibly the correct radio image to get your device running properly.
Radio images are almost always a .zip file that is flashed in recovery. and they are very easy to use. You simply download the image you want to try, and place it on your SD card. then boot into recovery and flash the file....reboot, and test.
You should read up on the flashing method too, and ensure that you understand exactly what you are doing "before" making internal changes to your device.
Additionally, you should make a nandroid backup of your current rom, just in case something goes wrong. then you have the ability to restore the old build and get the phone running again.
read, read, read....it's the only way to grasp this information...
good luck.....g
Thanks gregsarg, that's a great start for me. I will throw myself into that direction. Thanks again for your help.
dubplatepressure said:
Thanks gregsarg, that's a great start for me. I will throw myself into that direction. Thanks again for your help.
Click to expand...
Click to collapse
always welcome....g
Well, a slow evening with little progress. After reading much, I ran a backup and tried installing a radio...no error message, just says installation aborted... not sure what tdsp is but I tried downloading and installing goo manager as I read where CWM (which is what I.assume I have now) doesn't work that might, but the installer which was supposed to have rebooted my phone and installed, it did not. This was a good 3 hrs and I was spent for the night. Guess I'll keep plowing away tomorrow.
I created a TWRP backup and have begun flashing different radios/modems... When I try to access mobile networks with the different radios installed none seem to work... .... so far I've tried:
Blaze_4g_LB7_radio_ATTNOTE
icsblaze
ROGERS_MODEM-CWMXLA2
UVLG3modemfori717
VK1_Test
KID_TEST
I've always wiped the dalvik/cache before flashing a new radio. My baseband was i717UCLF6, but after I restored it's now T879UVLG3, which is wierd because UVLG3 was the last radio I installed before I restored. I assume the radio didn't restore and I'm now using a T879 radio as opposed to an i717 radio, but it does not prompt me for a sim card after the restore. I can select a preferred band using the *#2263# command, but none seem to drive a better signal - I'm still idling somewhere between a no-signal and unknown network (most of the time) and 1 to 2 bars. Some of the above recognized my sim and suggested either HSPA, GSM, etc on the *#2263# command, others showed nothing when I did that.
Am I correct in assuming I just need to keep doing this until I find a compatible radio and upon flashing and rebooting it will simply connect with a solid signal? Is there any more specific versions of radios I should be targeting?
Re: SGH-i717 No network connectivity
The modem isn't changed or restored when you restore a nandroid or flash a rom.
If your goal is t-mobile or wind or simplemobile. You have the correct modem installed.
Just go to settings and input your APN and save it. Not every rom has the apn's , and not every carrier automatically sends the apn settings.
Thanks Ranger... my goal is to get it working with Fido... but I'm not sure if that's synonymous with T-mobile or Wind yet
and ngretud
Anyone else have any input on Fido radios? I can seem to find one that works for Ontario....
consistent tomsisu
I've now tried the following radios:
ICS Kid
ICS Telus
ICS.zip
ICSblaze
Kid_Test
UVLG3modem
VK1_Test
Every single one upon reboot leaves me with no connection.,, I don't get what I'm doing wrong here... frustrating. Only way I can get any kind of connection after flashing radios for hours is to flash my restore, which brings me back to the edge2 network. I've tried the Good Blaze ICS newamss and the UVLG3modelfori717...n7005amss too, and while I do get a connection it's virtually the same as the existing crappy 0 to 1 bar, or none with a no-connection symbol.
Any help guys?
Anyone at all? I get weak to no.reception in most places and when I leave the city I have no.connection at all. If it was the radios then why wouldn't trying all those radios show improvement? At this rate I am considering just scrapping the whole thing and getting a phone tats locked to Fido if this is the best there is.
Is this the right forum for this?
Re: SGH-i717D Radio/Modem for Fido - help!
There is no such thing as a Fido radio. You flash a T-Mobile compatible radio (recognizes and uses the two bands/frequencies AWS), verify the baseband in phone settings is the radio you flashed, input the correct APN settings for Fido.
Things to check: your sim works with data in another phone, data is enabled in phone settings.
rangercaptain said:
There is no such thing as a Fido radio. You flash a T-Mobile compatible radio (recognizes and uses the two bands/frequencies AWS), verify the baseband in phone settings is the radio you flashed, input the correct APN settings for Fido.
Things to check: your sim works with data in another phone, data is enabled in phone settings.
Click to expand...
Click to collapse
Thx... SIM works fine, data is enabled. Phone always says unknown under the baseband on phone settings. Pretty confident APN settings are fine, I had them confirmed with Fido. Is it just I haven't found the right modem/radio?
I tried the ones I've found most common in threads: iceblaze, KID, VK1 and even an UVDLE from an S2 thread.... still getting the same low, low signal, 0 to 2 bars with intermittent EDGE:2 signal.
Re: SGH-i717D Radio/Modem for Fido - help!
Ok, so you are sending/receiving data. But is that only using EDGE network or have you connected to 3G data network?
And if you don't have a baseband, the usual remedy is to return to stock at&t ICS rom and reflash your preferred modem.
Have you had better data strength with another device? Maybe two bars is all your location gets.
rangercaptain said:
Ok, so you are sending/receiving data. But is that only using EDGE network or have you connected to 3G data network?
And if you don't have a baseband, the usual remedy is to return to stock at&t ICS rom and reflash your preferred modem.
Have you had better data strength with another device? Maybe two bars is all your location gets.
Click to expand...
Click to collapse
I know we are conversing privately but I'll continue the responses here in case it benefits someone else. I haven't been able to connect to a 3g data network yet.... Because my unit is an i717D (Telus), do I need to flash to the stock Telus ICS rom or do I need to use the AT&T rom?
I was using an HTC One S, same network but locked to Fido, default OS, same SIM card, and was getting perfect signal and data speeds. I can't see how a place like downtown Toronto would yield any signal issues... like you said it seems like it's a radio/modem issue.
Re: SGH-i717D Radio/Modem for Fido - help!
I hate to suggest it, but one old dependable T-Mobile compatible modem:
http://bayfiles.com/file/6FwV/WrxD5a/Blaze_4G_LB7_radio_ATTNOTE.zip
Its been modified and many have had success with it.
So I have flashed a stock Telus ICS ROM, and along with a stock Rogers radio am getting a baseband I717RUXLF4, Edge:2 signal, and even Fido under network. Getting 1-3 bars signal strength, but still no data.
I tried flashing like 5-7 ICS radios and all of them produced a 'no sim' on reboot. I had to re-flash the stock Telus ICS rom and the rogers radio to get it to read a SIM again...
Super frustrating as I feel like I'm going around in circles never solving the issue here...
Does anyone have experience with Fido modems in Toronto or Ontario? Everything I seen to find.is either for.Telus, Rogers, Wind or Bell...
Sent from my SGH-I717D using xda app-developers app
Another update for no one to read....
Tried flashing the Perfection ICS ROM... got same signal issues, installed the Rogers radio that seemed to work incrementally better with the stock Telus Rom... still floating around the issue of low signal...
There is a shockingly little amount of documentation on Fido setups here... most everything is either Bell, Rogers or Telus, with some Wind and Mobilicity.
Can ANYONE please provide me with some direction here? I think I've done my due diligence and respected the process for new people that these forums demand in terms of reading, research and such... I haven't spammed my issues anywhere else, and clearly seem to be stuck on this issue....
Ok, you need a modem that is 850/1900. at&t is 900/1900. So thats why you get 2G because in some areas you connect with a weak signal.
The Canadian stock rom and the Canadian stock modem for Rogers should work.
In network settings you may be able to select network frequencies. If so, select WCDMA only so your phone stays on 1900.
If that doesn't work, dial *#2263# and find the band selector, and select 850.