Atrix is my first Android Phone. I have rooted it and Bootloader unlocked.
Also have Rom Racer Recovery mod installed.
I use to try lots of apps and uninstall them if i didn't like it.
Issue is I am feeling my Phone getting very slow nowadays.
Like Booting, launching an app, Response after closing a running app.
I wanted to do a Factory Reset and install needed apps only.
Since I am rooted and Bootloader locked,
What would be the best method to Reset?
is it good to Perform reset thru Settings/Privacy?
or should try thru clockworkmod?
or Flashing again 2.3.4?
I am on 2.3.4 Stock ROM.
That Factory Reset will basically remove all your personal stuff including all your settings and apps. So it would not be bad idea for a fresh new start.
Just boot into recovery and then:
Go to "Advanced" and then "Wipe Dalvik Cache"
then "Go Back" and "Wipe Cache" and "Wipe Data/Factory Reset"
Not sure if the order matters but that's how I do it, plus I use fastboot.
sakdroid said:
Atrix is my first Android Phone. I have rooted it and Bootloader unlocked.
Also have Rom Racer Recovery mod installed.
I use to try lots of apps and uninstall them if i didn't like it.
Issue is I am feeling my Phone getting very slow nowadays.
Like Booting, launching an app, Response after closing a running app.
I wanted to do a Factory Reset and install needed apps only.
Since I am rooted and Bootloader locked,
What would be the best method to Reset?
is it good to Perform reset thru Settings/Privacy?
or should try thru clockworkmod?
or Flashing again 2.3.4?
I am on 2.3.4 Stock ROM.
Click to expand...
Click to collapse
I recently became a fan of this method: http://forum.xda-developers.com/showthread.php?t=1421522
Even the recovery methods seemed to leave some things lingering around.
Related
Anyone know how to go about this on my GSII?
Planning on flashing to Stock and would prefer a fresh start, would just flashing the firmware be sufficient?
I do remember seeing a reset option when pressing power+home+vol down on start. Would ideally like everything to go back to factory and all data deleted, basically factory fresh.
Thanks Guys.
Chronicles404 said:
Anyone know how to go about this on my GSII?
Planning on flashing to Stock and would prefer a fresh start, would just flashing the firmware be sufficient?
I do remember seeing a reset option when pressing power+home+vol down on start. Would ideally like everything to go back to factory and all data deleted, basically factory fresh.
Thanks Guys.
Click to expand...
Click to collapse
Have you rooted and flashed anything or changed anything on /system?
If not, the reset option in recovery would be fine.
If you have, you would need to reflash.
pulser_g2 said:
Have you rooted and flashed anything or changed anything on /system?
If not, the reset option in recovery would be fine.
If you have, you would need to reflash.
Click to expand...
Click to collapse
Thanks for the prompt reply.
Rooted yes, though not sure if anything is changed on/system as a result (I personally haven't).
I've an O2 Handest so would like to unbrand, hence I would be flashing to the actual stock Rom so I'm assuming I would need to Root again anyhow?
Just wondering If I would need to reset then flash, or would flash be sufficient and get rid of everything in the process?
A flash should be enough to clear out anything left behind.
You would obviously flash the O2 UK firmware, and you would want to reset the download mode counter (see the dev section) before you presented it as an "untouched" phone
I have a Samsung Transform Ultra (rooted), I am using the stock ROM that came with the phone, recently I have corrupted something and need to attempt a factory reset, however some people have said that doing a factory reset on a rooted phone could brick it, so this brings a couple of questions:
1.- How would I un-root my phone, or, if un-rooting is not necessary, what steps should I take to factory reset it safely? My data is safely backed up already.
2.- Has anyone done a factory reset on a rooted Transform Ultra?
Any help would be most appreciated.
The4thDoctor said:
I have a Samsung Transform Ultra (rooted), I am using the stock ROM that came with the phone, recently I have corrupted something and need to attempt a factory reset, however some people have said that doing a factory reset on a rooted phone could brick it, so this brings a couple of questions:
1.- How would I un-root my phone, or, if un-rooting is not necessary, what steps should I take to factory reset it safely? My data is safely backed up already.
2.- Has anyone done a factory reset on a rooted Transform Ultra?
Any help would be most appreciated.
Click to expand...
Click to collapse
Don't you have a custom Recovery installed? I don't know about this device specifically, but there should be a factory reset option you can utilize within your Recovery image. You'll need a ROM to flash afterwards also, otherwise you'll have no OS on your device. Or simply flash a NANDroid backup.
Sent from my HTC Vision using XDA App
Since my (rooted) phone has the stock factory ROM only, and I never changed it, do I still need a ROM? My original ROM was never removed or changed.
The4thDoctor said:
Since my (rooted) phone has the stock factory ROM only, and I never changed it, do I still need a ROM? My original ROM was never removed or changed.
Click to expand...
Click to collapse
Well that's the thing, when you factory reset a rooted phone it wipes everything, including the OS. So after a factory reset there will be no ROM to boot into. Even though you've never changed it and you're running stock, you'd still need a copy of that stock ROM (if you wanted to continue running stock). But if you've made a nandroid backup (complete snapshot of your entire system) at some point before you noticed the current problem you're having, it might be easier to simply restore that particular backup via Recovery.
I never flashed any roms or recovery, just rooted.
Unfortunately, I never made a nandroid backup before I had this problem, however, my daughter has an identical phone, could I make such a backup from hers, and use it on my phone, then just delete her settings etc?
I had no idea that just rooting would kill the stock ROM image, making the phone un-recoverable, I thought that rooting only gave me superuser permissions.
The4thDoctor said:
I never flashed any roms or recovery, just rooted.
Unfortunately, I never made a nandroid backup before I had this problem, however, my daughter has an identical phone, could I make such a backup from hers, and use it on my phone, then just delete her settings etc?
I had no idea that just rooting would kill the stock ROM image, making the phone un-recoverable, I thought that rooting only gave me superuser permissions.
Click to expand...
Click to collapse
Looks like Clockworkmod doesn't support your device.... not sure what custom Recoveries are available for your phone... but rooting doesn't mess up the stock ROM, we (the users) mess up our ROMs. You're right when you said that rooting gives you superuser privileges, and with those privileges come the unfortunate ability to screws stuff up. In my case I have tons of backups and a custom Recovery whereby I can wipe the phone and restore if need be. I also have ADB installed and can use Fastboot commands if things go sideways. Basically if you're gonna root have a backup plan.
Can you perhaps follow an unrooting method? Then you could safely factory reset without losing the OS... you know...the more I think about this, the more I wonder if you could just use the factory reset option from within the phone's settings... on a custom ROM you'd never do it, but in your situation (no custom recovery or ROM) who knows, maybe it would work with a problem.... I'll ask a friend of mine and post back.
Edit: Never heard back, but in your case on the stock ROM without a custom Recovery you *should* be able to factory reset through the Privacy setting section of your settings. If you do lose root, simply re root and you're good to go.
Thanks, Well I am going to give it a try and see what happens, worst case, I will have to buy another phone.
EDIT: I had no problems with factory reset, thank you!
I have the Optimus T/P509 with Android 2.2.2 and I rooted it using Gingerbreak. I tried using Titanium backup to delete the Pacman demo and my phone reset itself to factory defaults. Then I tried using a Clockworkmod Rom manager to start a recovery program and it also reset to factory defaults. It still has super user on the apps list each time it's reset itself which seems normal from what I've read on here.
I updated the Superuser account successfully but still no effect on the resetting issue.
I used a root check and it said I was successful. Root checker is the only root required app that hasn't caused the system to reset to factory defaults. Any ideas, ladies and gentleman?
Btw, this phone was unlocked and I use it with AT&T. Just want to remove bloatware. Not so much interested in changing roms but I will if necessary.
Have you flashed a recovery yet? If not, you can do so in ROM Manager (select "Flash ClockworkMod Recovery" and then select "LGE Optimus One (old
BB))
Well.. I think that definitely fixed the issue. I was able to use Clockworkmod normally after I did that. I'm trying to delete the pacman demo again in titanium backup and it's doing slightly different things now. Frozen on a yellow exclamation point. I'm going to let it set for 30 minutes then reboot it.
Thanks Sweetnsour!!!!
Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Thanks for the reply!
I didn't check the MD5 last night but I did just now and it matches.
I did a cache wipe the first time but not a system wipe. Then I started getting more desperate and tried reinstalling w/ system wipes and factory resets, but it didn't change anything.
No, I didn't change the ROM. Doing the Bootloader unlock exploit was about the absolute maximum of my technical abilities! The only thing I know I did wrong was that I didn't downgrade to the old boot version the first time (mainly because the wifi thing sounded inconsequential and I didn't want to learn the procedure if I didn't have to).
Anyway, I just tried Ultimate KangBang and it seems to work--no error messages so far. I don't know what I did wrong, but hopefully this keeps working!
IceDragon59 said:
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
Click to expand...
Click to collapse
andybones said:
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Click to expand...
Click to collapse
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
franklin411 said:
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
Click to expand...
Click to collapse
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
in the future it is always good practice to backup(nandroid) your current ROM. I have been burned too many times, always do a nandroid before you do anything in recovery.
your photos are normally saved to the SD, flashing ROMs or wiping the system will not delete them
andybones said:
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
Click to expand...
Click to collapse
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
franklin411 said:
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
Click to expand...
Click to collapse
na the name has nothing to do with it. it can be named whatever.
im guessing the wipe worked.
franklin411 said:
Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Click to expand...
Click to collapse
weird, i was having the same problem with the same processes stopped working. i wiped cache dalvik and system but not factory reset. once i factory reset, it worked fine. i figured a system wipe would have been enough....
Was thinking about factory resetting my phone. For some reason the WatchESPN app isn't working and I thought that
if I factory reset my phone it will work again. Question is, Will I lose root if I factory reset my phone.. Thanks
kidnice15 said:
Was thinking about factory resetting my phone. For some reason the WatchESPN app isn't working and I thought that
if I factory reset my phone it will work again. Question is, Will I lose root if I factory reset my phone.. Thanks
Click to expand...
Click to collapse
If only one app is having issues I'd uninstall and reinstall the app. Factory Data Reset is really a "last resort" sort of thing. And the main thing it does for you is to uninstall all the apps you've installed and then reinstalls them.
Why not just wipe the application data for Watch ESPN? As far as Factory Reset, it wipes /data and /cache. If you're using stock recovery, this will include the internal SD card, so pictures, videos, etc. that you have taken will also be wiped.
kidnice15 said:
Was thinking about factory resetting my phone. For some reason the WatchESPN app isn't working and I thought that
if I factory reset my phone it will work again. Question is, Will I lose root if I factory reset my phone.. Thanks
Click to expand...
Click to collapse
The idea of factory reset can be quiet confusing in android. The word "factory reset" is fancy enough to trick you that it will restore everything back to where it was...but all it does is just clearing stored cache, data, and etc etc., and it does NOT promise you anything. In lots of circumstances, damaged system or installed apps can't be restored, and they are ended up getting firmware flashed by manufacturer (some Verizon stores do flash firmware but many don't). Let's say you're rooted and removed all the bloats using system app remover. That's not going to restore your bloats to where it was....and you'll be rejected from receiving OTA update.
To get back to your question, "Will I lose root if I factory reset my phone?" I think it really depends on how you rooted. I think if you rooted your phone by flashing rooted image, then probably not. But if you use ADB shell to root your phone, you may lose your root.
Try to clear your cache and see if it works again.....I think that's the best way.
I agree you probably don't need a factory reset here. But no you will not lose root. Root is custom binaries inside the system that will not be touched. Depending how you installed your super user app I guess you could lose that, but you who's just have to download one
Sent from my SCH-I605 (AKA NOTE 2)