[Q] Problem upgrading firmware - Galaxy Ace S5830 General

Hello!
Last week i bought a galaxy ace, with yoigo, and it seems i cant flash new roms
I downloaded a one-package (last version) S5830XWKPW and flashed, but mobile drops an error, something like "error appling csc" cannot access to "system/csc/YOG/csc"
When the phone rebooted, odin didnt detected it, and when i saw the firmware version, it was the same ( it didnt change with the upgrade)
So what do you think, i tried rooting and creating the YOG folder, and reflashing again, that way there isnt any error, but the firmware didnt changed at all, so the result was the same....
Do you think my operator has locked the bootloader or something??
Thanks!

try the full package instead. those one package usually missing data.rfs

did you put your phone to download mode first before flashing ??
for flashing first put your phone to download mode ,
1)switch off the mobile
2) press volume down button + home button +power on button together
3)in screen it will come "downloading...."
4)connect to pc
5) now flash your phone
Happy flashing ​

thats how i did it
i checked using *#1234#
the csc version is updated, the phone version should change too? or the pda?

Did you use the proper ops file?
cooper.ops?

yeah
i used that archive, but just my csc version is updated, not even phone or pda
is that normal? can any of you post your version??
thanks!

petete159 said:
i used that archive, but just my csc version is updated, not even phone or pda
is that normal? can any of you post your version??
thanks!
Click to expand...
Click to collapse
Try flashing the phone - S5830XWKS2 ## country - netherlands csc - S5830XENKS1 version from here http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-S5830&r=1#regiona
Warning - If your phone is operator specific your sim won't work. But, your phone will boot successfully so there's no harm in trying this. Try this and see if your sim works.
One more thing - The default language is "netherland's language"
So after flashing you need to change the language to your required language in settings

Aham i think i understand why you selected that netherlands version, with my pda version, the compatibles are France, Germany, Italy, Netherlands, Portugal, Spain, Turkey, UK
and from that page, i have to pick one that isnt linked to any operator
so i cant just select one with yoigo(my operator) or other with no operator linked
is that??
PD: i will try to flash next week, because i want to try a little the phone battery and that stuff
thanks!

petete159 said:
Aham i think i understand why you selected that netherlands version, with my pda version, the compatibles are France, Germany, Italy, Netherlands, Portugal, Spain, Turkey, UK
and from that page, i have to pick one that isnt linked to any operator
so i cant just select one with yoigo(my operator) or other with no operator linked
is that??
PD: i will try to flash next week, because i want to try a little the phone battery and that stuff
thanks!
Click to expand...
Click to collapse
If you bought your phone from yoigo then it means your phone is carrier specific, and you "might" face problems. But if you bought your phone from any store and you are just using yoigo sim then you can flash any version, I dont think you will face any problems
Please press the thanks button if I helped you

Related

Flashing Chinese Firmware Fail...

Dear all,
I am trying to flash my GT-i9300 from stock Hong Kong firmware to stock Chinese Firmware because Hong Kong version has traditional chinese input whereas I need simplified Chinese Input which may be available in Chinese version. When I bought the mobile in China, it already had Chinese firmware but I installed Cyanogenmod and other things but now I want to revert back. The problem is every firmware I tried works when I flash using Odin 3 except the CHU firmware. While flashing as soon as the process comes to Modem, Odin displays Fail and I have no option but to flash back to other firmware which installs without a problem. Any clues why the phone doesn't accept CHU firmware? I have tried all the four firmwares available on Sammobile website for CHU (China) but non of them installs (all fails at the Modem step). I also downloaded from other sites but the same problem. By the way, my mobile is not Chinese, it was made for the European market, I am not sure but I think it was Croatia or something, dont recognize the language on the packaging.
Another tiny problem: My mobile doesn't responds smoothly when it is plugged for charging, the touch seems not to work. I have to touch an icon two or three times to open it. Don't know why.
Thanks all.
Could it maybe have something to do with different network used in China? I mean doesn't the Chinese networks use different technology from Europe? That would maybe explain the European version not accepting Chinese modem?
Dear Juahan,
May be... I think I should give it a try but installing a few firmwares from around the world and let you know. However, when I bought this mobile, it was European model having a chinese firmware, I think they shop sellers in China had already installed a chinese firmware on it, so how come they could do it while I can't. Well to be honest I don't exactly remember the firmware which came installed but I know that it had Simplified Chinese, which is used not available in Hong Kong version. Anyhow, I have to get certain so I will try some new firmwares on it. May be you are right. Thanks any way.
Have you tried Kies initialization procedure? It should help you to determine your phone's factory firmware and even flash it if you wish.
Don't remember exactly location of this option in menu (don't have my laptop turned on now) but it was something about initialization and restoring in Kies menu. All you need is to enter your phone's serial number (located under battery or in setting menu) and model number (GT-i9300). Kies will check those data in Samsung database and ask what to do next, flash or not.
I don't know why but, sadly, it sometimes doesn't work with some models.
Problems with touchscreen while charging is due to unstable power source or faulty AC charger. Try charging with USB port in your computer and check if problem persists.
i9.0.1.3k galaxy imperator

CSC change without root?

I bought SGS6E from polish operator Plus - with CSC PLS.
I found polish XEO (i was thinking that):
XEO-G925FXXU1AOCV-20150410142820.zip
flashed via ODIN. Everything went ok. But the CSC that phone show is... TPH for Portugal.
It is possible to change CSC without waiting for new firmware (good) for XEO?
Did you perform a factory reset in recovery as that resets the csc.
Otherwise maybe phone tools Samsung from the marketplace?
On the screen i seen
Appiled multi-csc. Csc appiled: TPH
arybak said:
I bought SGS6E from polish operator Plus - with CSC PLS.
I found polish XEO (i was thinking that):
XEO-G925FXXU1AOCV-20150410142820.zip
flashed via ODIN. Everything went ok. But the CSC that phone show is... TPH for Portugal.
It is possible to change CSC without waiting for new firmware (good) for XEO?
Click to expand...
Click to collapse
Hey,
No way to do that. The problem is that even if you download FWs from sammobile that have different CSCs - based on my experience - they will default to something else. On my Galaxy Alpha which originally had XEH I flashed a XEF ROM and there was no way back. Sad but true.
The only good thing with the S6 is that with the currently available 5.0.2 ROMs you can still achieve root without loosing the warranty. And after root you can change the CSC and then can flash the original ROM which will NOW default to CSC you just set. But only if it contains that CSC package!
Hope I could help!
Cheers,
TT
arybak said:
I bought SGS6E from polish operator Plus - with CSC PLS.
I found polish XEO (i was thinking that):
XEO-G925FXXU1AOCV-20150410142820.zip
flashed via ODIN. Everything went ok. But the CSC that phone show is... TPH for Portugal.
It is possible to change CSC without waiting for new firmware (good) for XEO?
Click to expand...
Click to collapse
I had the same problem first get your firmware from sammobile flash it through odin
then factory reset from stock recovery it will chose a random CSC but dont worry once you setup your new device go into the setting>backup and reset>factory reset. make sure you dont have automatic restore.
after reset setup device again then Open your phone’s dialer and type the following code with your device IMEI number: *#272*Phone’s IMEI Here#
it should automaticaly take to your csc changer screen pick ur one then install
hope it works !
ishanmu said:
I had the same problem first get your firmware from sammobile flash it through odin
then factory reset from stock recovery it will chose a random CSC but dont worry once you setup your new device go into the setting>backup and reset>factory reset. make sure you dont have automatic restore.
after reset setup device again then Open your phone’s dialer and type the following code with your device IMEI number: *#272*Phone’s IMEI Here#
it should automaticaly take to your csc changer screen pick ur one then install
hope it works !
Click to expand...
Click to collapse
How it works : on devices where dialer NOT shown up CSC changer (e.g.: 920F) :
Go to recovery, Dial up, Home + Power
wipe cache and perform a factory reset
next is important : power down the phone. NOT to reboot.
Power on in download mode: volume down+home+power buttons
FLASH for example : BTU :
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
after reboot, it will be English, and If U go to recovery it will apply BTU.
Hope it helps
p.s.: It wont works with EVERY Firmware. don't know WHY. For example :
I wanted to flash after succesfully changed the CSC from TPH to BTU, so I wanted to flash XEH....BUT that resets to TPH after XEH flash.
So at least to BTU it works specially if you are in TPH CSC !
Can I change the CSC on an 925F to something non F? Currently mine is coded THR (Iran) and I wish to change it to something USA related. I'm hoping to activate Samsung Pay but from what I've read the change will require root which will trip Knox which won't allow Samsung Pay to work. Am I right?
Working for Galaxy s6 Edge in COJ9 ? If yes I will restore it
damm i wish i found this thread some hours ago ... same prob with G925FXXU3COI9_G925FOXX3COJ1_G925FXXU3COI9_HOME.tar as XEO CSC declared ...
coming from DBT -->> BTU --> trying jump to XEO with Firmware found by SamFirm , but failed.. every try it switches to TPH anywhere with CSC/Firmware i come from.
after read this thread i give up my trys
so go back to BTU and hope OTA Update to marschmallow comes next days ...
greetings from germany
So finally there is no option to install CLEAR XEO when you have brand? The same as author. Comming from PLS (plus) / TPL (T-Mobile) to XEO, and i get TPH For portugal.
Or meybe ishanmu and tiborprogmed way is working to have clear XEO with LTE icon?

Autopreconfig, new service provider notification

Sometimes I get a notification from AutoPreconfig, asking me to use new apps and configurations from my new service provider. If I open the notification, it says that to use apps and configurations from my new provider, I need to restore my phone, all my user data shall be lost, etc. I can press "ok" and nothing happens.
Why does that happen?
Anyone else getting this? Can I get rid of it without factory reseting the phone?
madvinegar said:
Sometimes I get a notification from AutoPreconfig, asking me to use new apps and configurations from my new service provider. If I open the notification, it says that to use apps and configurations from my new provider, I need to restore my phone, all my user data shall be lost, etc. I can press "ok" and nothing happens.
Why does that happen?
Anyone else getting this? Can I get rid of it without factory reseting the phone?
Click to expand...
Click to collapse
I think that this happens when for an example you live in Spain and you bought a phone for European union not Spain but Germany.... When you incert your sim card for first time it reads that your provider is in Spain but your CSC belongs to Germany so want to change your CSC from Germany to Spain .. That's why it asks you to factory reset to change your CSC...
PLEASE help from someone if I'm wrong....
tsiglas said:
I think that this happens when for an example you live in Spain and you bought a phone for European union not Spain but Germany.... When you incert your sim card for first time it reads that your provider is in Spain but your CSC belongs to Germany so want to change your CSC from Germany to Spain .. That's why it asks you to factory reset to change your CSC...
PLEASE help from someone if I'm wrong....
Click to expand...
Click to collapse
Thanx... That makes sense, but is it something new...?
I used to have an s7edge with Poland csc (XEO) but never got this message even if my sim card is from a Greek provider.
Now, I see that my S9+ has Italian csc (ITV) and I get this message because my sim card is from a Greek provider...
Why is Samsung doing this to their new models...?
If I actually do the factory reset, what more will I gain? Is it worth it or nothing will actually change apart from the csc...? Everything is working just fine now.
madvinegar said:
Thanx... That makes sense, but is it something new...?
I used to have an s7edge with Poland csc (XEO) but never got this message even if my sim card is from a Greek provider.
Now, I see that my S9+ has Italian csc (ITV) and I get this message because my sim card is from a Greek provider...
Why is Samsung doing this to their new models...?
If I actually do the factory reset, what more will I gain? Is it worth it or nothing will actually change apart from the csc...? Everything is working just fine now.
Click to expand...
Click to collapse
Yes that's exactly what is happening.
Ρε πατρίδα μπες στο myphone.gr στο θέμα του s9+ και θα στα εξηγήσουμε όλα εκεί...
So I decided to bite the bullet, and made a factory reset through the settings, with my Sim Card inserted.
It rebooted my phone, after first reboot (just on the first language selection page that appears) it prompted the message again (Autopreconfig), and asked me to revert to factory settings again so as to set up the new sim card.
I selected OK, the phone rebooted once more and this time it booted directly to my language (i.e. to the language of my carrier's sim card).
I checked the settings and also downloaded an app from Play Store to check my CSC, and indeed my CSC has changed to my country.
I had ITV (Italy) csc, and now I have EUR (Greece) csc.
So now all is ok and set up to the correct csc.
Fyi, before doing the above I had backed up everything to samsung cloud.
Hello all,
Same problem here but, in my case, I have used the phone for some months... images, saven configs in many apps, etc...
I know such things are not saved in the samsung cloud... is there any other way to change this? Do all of them need a factory reset?
I use Samsung Galaxy Note 10+ Android 11. I intently changed CSC to THL (Thailand) to activate built in call recorder. But now every time I restart my phone CIDmanager warning appears as in the screenshot. How to get rid of it? I don't wanna change CSC code back to my home country's.
No one knows the solution?

Why I can't change my CSC even after a hard-reset? (Custom ROM)

EDIT: I'm trying with a STOCK ROM, not Custom... I can't change the title of this thread, sorry.
Hi everyone!
I bough my SM-G9650 in Paraguay and I'm from Brazil.
There they use the csc "UPO" and here we use "ZTO".. Because of this I can't use Samsung Pay for example.
I tried factory reset (and wiping from recovery too) my cellphone and installing the most recent custom rom zto through ODIN (most recent) but the csc still UPO.
Anyone can help me?
My SIM Card is from Brazil and in any try it not asked for apply the configurations from this SIM card.
If your device is factory unlocked try with a SIM from a another Brazil Carrier , that works for example using the last ARF (Multi CSC OWO) in México , if i put a Telcel (Mexican carrier) SIM in the first boot the device don´t ask anything and the CSC is from CHILE (CHL) , but i repeat the process (With a SIM from another carrier installed) and in the first boot the device ask for a factory reset to apply changes and my csc change to "MXO" (Mexico).
Try that.

[HELP] my phone won't change firmware!

A few days ago I got my Samsung A21s (SM-A217M) and I wanted to test out different firmware regions (choose the one where I live) so I downloaded 3, one was from Brasil and the other 2 are from here (tripled checked the CSC) but when I try to flash the correct firmware from my region it passes but when the phone boots up it looks exactly the same from the brasilian firmware, same network providers, apps language, etc. I have even tried just flashing the CSC but nothing has worked at all. Is there something that im missing? Is there another method that will allow me to change to the correct firmware?

Categories

Resources