Related
I use SetCPU to help battery life but someone told me it's not needed on the SGS2 as it already scales CPU for demand. True?
leedavis said:
I use SetCPU to help battery life but someone told me it's not needed on the SGS2 as it already scales CPU for demand. True?
Click to expand...
Click to collapse
Interesting point you raise actually.
I've just installed Setcpu and used the on demand governor. I left the values as default (200mhz for minimum and 1.2 ghz for maximum) - with no overclock.
I've immediately noticed swiping through the screens is a bit smoother and the biggest improvement is the gallery. All my photos appear much smoother. Before the gallery app was a bit lagy.
I haven't set any profiles yet such as screen off.
Every Android phone I've owned scaled the cpu, I think they all do. I've found that with setCPU my battery gets drained much faster en no real benefit in smoothness.
jzuijlek said:
Every Android phone I've owned scaled the cpu, I think they all do. I've found that with setCPU my battery gets drained much faster en no real benefit in smoothness.
Click to expand...
Click to collapse
Have you tried this yet though on the Galaxy S2?
There is definitely less lag than before - as stated, specifically in the gallery app. Just generally swiping feels more responsive as well. Battery is still pretty awesome, especially when using Lightening Rom 1.1 and the Android battery calibration app.
Hmm. I'll try SetCPU on the SGS2 and post back the findings (Performance+Battery).
I don't know how can it get any more smoother, I mean its already SO smooth!
there are many points to use setcpu on gs2:
-for some reason I dunno, gs2 can't manage it's 1.2ghz without gettin too warm. downclock and get rid of the burn effect.
-gs2 sports a good management of gpu (it does most of the work and setcpu doesnt down\overclock that). downclockin doesnt affect UI or video o browsing experience at all. can even downclock at 500 max speed without any sides.
-the only side u ll see it's benchmark (quadrant downgrading to 2000) but I hope u won't pay attention to such an unseful thing. benchmark doenst mean nothing, daily usage it's the only point to look at.
my settings: conservative, 200min 800max.
battery draining doesnt belong to setcpu this time, look to other settings.
alexleon said:
there are many points to use setcpu on gs2:
-for some reason I dunno, gs2 can't manage it's 1.2ghz without gettin too warm. downclock and get rid of the burn effect.
-gs2 sports a good management of gpu (it does most of the work and setcpu doesnt down\overclock that). downclockin doesnt affect UI or video o browsing experience at all. can even downclock at 500 max speed without any sides.
-the only side u ll see it's benchmark (quadrant downgrading to 2000) but I hope u won't pay attention to such an unseful thing. benchmark doenst mean nothing, daily usage it's the only point to look at.
my settings: conservative, 200min 800max.
battery draining doesnt belong to setcpu this time, look to other settings.
Click to expand...
Click to collapse
IT IS TRUE. I agree with every single line you wrote, it is just my expericence.
I have too setcpu conservative and undercloked 800 Mhz.
There no slow down or lag at all... But I am wondering if it gives a real boost to battery life. I am not sure of this.
I'll keep you guys posted... But I think that an undevolted Kernel it is really a need as for the solution of the damn dual core ginger bug that is sucking 20% of my battery every day
Well,from my experience with my Desire and Desire HD(won't even bother with the Hero,I had no real knowledge then),governors can make a huge difference.I for one like smartass or interactive governors(mostly the same).I wouldn't suggest conservative,interactive does the job much better.Tasks get done in less time and the CPU throttles down more quickly.Other than that,you can underclock or overclock all you like,it never made any big difference in battery life for me(Unless Sammy's CPUs are different in that aspect-Snapdragons are really "overclock-friendly").That's personal preference after all!
Anyway,the best solution IMO would be a vdd_levels interface.For those who don't know what it is,it is a mod made by -snq(Meet him at the Desire forums-That guy's a true LEGEND!He can patch/modify anything!),which practically allows you to change the voltage levels of the CPU on the fly rather than having to stick with the values hardcoded into the kernel.Using this and a simple script in GScript to change values that won't survive reboot or in init.d to be applied on boot,you can find the optimal voltages for your CPU(Don't forget,every CPU is unique and different),thus reducing heat and maximizing battery life.
If a dev brings that to the SGS2 it will be a big step in the right direction as far as I'm concerned.
I use SetCPU without issue, but only to run profiles (i limit the device to 500mhz when the screen is off). The rest of the time it scales itself up to 1.4GHz without fuss and using stock voltage. Battery life is fine, best ive had for an android device.
Wow, I've taken SetCPU off but left JuiceDefender on and my battery life is fantastic. At 70% after slightly heavier than normal use (used for listening to music for a couple of hours this morning) and been off charge for 8.5 hours.
SetCPU seems counterproductive on SGS2
leedavis said:
I use SetCPU to help battery life but someone told me it's not needed on the SGS2 as it already scales CPU for demand. True?
Click to expand...
Click to collapse
I did set ondemand which is a little more reactive and slightly smoother.
Though System Tuner is less cpu-consuming and much more useful on the SGS2. No need for all those complicated settings from setCPU. Only changing governor and changing frequencies on standby are useful.
leedavis said:
Wow, I've taken SetCPU off but left JuiceDefender on and my battery life is fantastic. At 70% after slightly heavier than normal use (used for listening to music for a couple of hours this morning) and been off charge for 8.5 hours.
SetCPU seems counterproductive on SGS2
Click to expand...
Click to collapse
Juice Defender uses as much battery as it saves this is fact, i have SepCPU set to 200 Min - 800 Max - On demand and have Juice Defender Ultimate and i thought it was great but it was recommended to me that i could save more battery by not using this, initially i was skeptical but tried it and i was astonished at the results, my battery life improved by 9 hours (i carried out a test with JD and without)
Anyone who says SetCPU uses up loads of battery is talking nonsense,it actually saves battery if configured correctly.
I am using Check Rom with set CPU I have it 1.2ghz max and 200. Using conservative governer. I been off charge for 15hrs, however I am using light usage I am on 72% screen on has been 5h 25m at time of writing. Not yet calibrated the battery.
jonny68 said:
Juice Defender uses as much battery as it saves this is fact, i have SepCPU set to 200 Min - 800 Max - On demand and have Juice Defender Ultimate and i thought it was great but it was recommended to me that i could save more battery by not using this, initially i was skeptical but tried it and i was astonished at the results, my battery life improved by 9 hours (i carried out a test with JD and without)
Anyone who says SetCPU uses up loads of battery is talking nonsense,it actually saves battery if configured correctly.
Click to expand...
Click to collapse
What are the settings are you using for the setcpu program in your S2?? Did you remove the Juice defender application?
As I understand solution for "998 MHz with screen on" bug is found: http://forum.xda-developers.com/showthread.php?t=1225411&page=17#post16944722
We need to replace only one governor.
I don't want to play with different ROMs and kernels and I'm looking for simplest solution.
Is it possible to compile it as a module ("ondemand_mod" for ex.) and add it to stock ROM?
Or any other (simple) way?
Wrong section ...
Sent from my X10i using Tapatalk
Why wrong Section, this is Development to get the CPU Governor working correctly
Wolfbreak said:
Why wrong Section, this is Development to get the CPU Governor working correctly
Click to expand...
Click to collapse
Exactly, this is the right section for such request.
However, I can't help but wonder: is this really a "problem"?
No offence to anyone, but I find that the phone is very snappy
when on max frequency... The big problem for me, would be if it
didn't go into Deep Sleep immediately after turning the screen off
and stayed at min frequency for an extended period.
When the screen is on (aka using the phone) I'd like it to be as FAST
as possible. That's the reason I use the minmax governor.
Anyway, again, I don't mean to argue with anyone, I am just
presenting my point of view.
My_Immortal said:
However, I can't help but wonder: is this really a "problem"?
No offence to anyone, but I find that the phone is very snappy
when on max frequency... The big problem for me, would be if it
didn't go into Deep Sleep immediately after turning the screen off
and stayed at min frequency for an extended period.
When the screen is on (aka using the phone) I'd like it to be as FAST
as possible. That's the reason I use the minmax governor.
Anyway, again, I don't mean to argue with anyone, I am just
presenting my point of view.
Click to expand...
Click to collapse
Yes, it's really problem.
Higher frequency - higher power consumption. Moreover - with higher frequency CPU used with higher voltage so consumption is even more higher. So at 998 MHz CPU eats about 5 times more battery than on 246MHz.
With properly tuned governor I don't feel any real lags or slowdowns.
And, when screen is on CPU load is usually is lower than 20% at full frequency. So I don't want to waste my battery.
As I see it's possible to compile and use governor as module.
Could someone compile it? And assemble as xRecovery package?
Or point me where to read about compiling for arm, where to get tools and so on...
Karlson2k said:
Yes, it's really problem.
Higher frequency - higher power consumption. Moreover - with higher frequency CPU used with higher voltage so consumption is even more higher. So at 998 MHz CPU eats about 5 times more battery than on 246MHz.
With properly tuned governor I don't feel any real lags or slowdowns.
And, when screen is on CPU load is usually is lower than 20% at full frequency. So I don't want to waste my battery.
Click to expand...
Click to collapse
The thing is, on 245 MHz, you can't get any kind of decent performance.
Try this: set the minimum and maximum CPU frequency with SetCPU to 245 and attempt to use the phone normally.
Also, you might be right about voltage, but if the CPU is forced to work on lower freqs when it actually needs higher, there's definitely stress and increased battery consumption.
My phone lasts for more than 24 hours and it's always at max frequency when the screen is on. No lag, no freezes, no drain.
I do agree that the ondemand governor might not function as expected but I fail to experience the actual problem. That might be just me though.
Xperia X10i via Tapatalk
My_Immortal said:
The thing is, on 245 MHz with high load, you can't get any kind of decent performance.
Try this: set the minimum and maximum CPU frequency with SetCPU to 245 and attempt to use the phone normally.
Also, you might be right about voltage, but if the CPU is forced to work on lower freqs when it actually needs higher, there's definitely stress and increased battery consumption.
My phone lasts for more than 24 hours and it's always at max frequency when the screen is on. No lag, no freezes, no drain.
I do agree that the ondemand governor might not function as expected but I fail to experience the actual problem. That might be just me though.
Click to expand...
Click to collapse
There is no need to work on 245MHz as proper governor rise frequency automatically when it's necessary.
And really no stress for CPU to work an low frequency at full load. Moreover - CPU will consume more power at 500Mhz with 45% load than at 250Mhz with 95% load.
Sometime I use phone for navigation - long time with screen on and very low load. In this scenario battery drains very fast.
And last one - I like to have everything working properly. In case that I'll really need high frequency all the time I'll use other governor. I just want to have a choice.
I need a simple solotion for this too..I use z kernel and I found that Thego2s kernel fixed this problem..I was going to flash that kernel but think that has a bug and stoucks on logo ..can some one sayas a simple way?
Yes, I think a lot of people would prefer to use just small and simple fixes rather than replacing the whole kernel with a lot of nice but (personally) unnecessary features.
I am waiting for developers to release a fix for this problam
What are the best settings to have you phone's CPU speed set at? I'm looking for both good performance and good battery. Also I am using the default overclocker, what is the best one? Thank you guys for your time.
Sent from my LG-VM670 using XDA Premium App
I use SMARTASS as my CPU speed governor and I set my CPU to 480-748 MHz, seems pretty stable for me.
Sent from my LG-VM670 using xda premium
thaunknownartist said:
What are the best settings to have you phone's CPU speed set at? I'm looking for both good performance and good battery. Also I am using the default overclocker, what is the best one? Thank you guys for your time.
Sent from my LG-VM670 using XDA Premium App
Click to expand...
Click to collapse
Overclocking values differ from phone to phone. Test it out with different values and use the one which is stable for you.
This was just discussed in the IHO technical-discussion thread, as a matter of fact.
My phone is stable for most stuff at 806 MHz, but sometimes the camera will cause a freeze/reboot. So I run at a 786 MHz max. Your phone will be different; this has to do with minute physical differences between individual chips.
The thing to keep in mind when overclocking is that the processor in our phone (unlike those of many other phones) does not make use of dynamic voltage scaling. There are only two voltage levels: a lower one if the phone is running at or below (or is it just below? correct me if I'm wrong, guys) 480 MHz, and a higher one if the phone is running above. So below 480 MHz, the system will give the processor a certain amount of voltage (period), and above, the processor will get a certain higher amount of voltage (period).
Because of that, the tests that have been done indicate that 806 MHz is the sweet spot for battery efficiency when the phone is in use--and the closer you get to 806, the better. Thus, I've had the following settings for quite some time:
786 MHz min
786 MHz max
Performance governor
which has treated me pretty well. On a day of light to moderate use, I'd end up with 65-75% battery left (occasionally more like 80%), depending on cell signal where I am et al. And it gives me probably the best performance I'm gonna get out of this phone.
However, I very recently decided to change the minimum to below that 480 MHz threshold and see what a lower voltage when idling would do for my battery life. My current settings are:
320 MHz min (may change to 480)
786 MHz max
Smart*** governor
There is actually a noticeable performance decrease when I first wake the phone up, so I may switch governors as well. In any case, I've had those settings for only one full day now, but for that one day the battery life was noticeably better. I'll post an update when I've had a few more days to test.
As always, it's difficult to quantify battery life in a reliable/rigorous manner (much less a universally applicable one), so YMMV.
Does anyone underclock? I only do it in certain situations. Do you see it as beneficial? Why or why not?
Sent from my Galaxy S2
EDIT: My settings are attached as a screenshot. My device is underclocked 50% of the time.
In my opinion and from personal use, I don't find underclocking to really be beneficial. I never really saw any better battery life. On the same note, I never really found overclocking and undervolting to be extremely beneficial either. It's like the gains aren't worth the time to tweak everything.
Undervolting, yes. Limiting clock speeds, and setting governer to conservative, yes. I say 1ghz is the best spot without losing much performance, and I get 2 days of battery life (sometimes) compared to the one day before... Stock kernel, you aren't going to see much of a difference because you can't undervolt...
I keep my phone at 800max 200min on conservative with a 85% up and 20% down threshold. I don't even see the phone slow down at 800 plus it saves some battery!
I force underclock when I'm in a situation where I KNOW the clock should never ramp up (Screen-off I set to 500) as a "safety measure" to prevent surprises.
I also may force underclock to 800 when running Navigation once my vehicle dock comes in - since we can't crank our charge current up.
Entropy512 said:
I force underclock when I'm in a situation where I KNOW the clock should never ramp up (Screen-off I set to 500) as a "safety measure" to prevent surprises.
I also may force underclock to 800 when running Navigation once my vehicle dock comes in - since we can't crank our charge current up.
Click to expand...
Click to collapse
My screen off is set to this also (200-500, conservative). You can use Tasker to change frequencies for specific apps automatically.
Hi there,
I have searched the forum for a suitable answer but couldn't really find one.
after experimenting with different kernels and underclocking I have always wondered what the pro's and con's are for using 100 Mhz as lowest frequency.
thanks
using cm9 latest + neak 2.0.2
eC1990ho said:
Hi there,
I have searched the forum for a suitable answer but couldn't really find one.
after experimenting with different kernels and underclocking I have always wondered what the pro's and con's are for using 100 Mhz as lowest frequency.
thanks
using cm9 latest + neak 2.0.2
Click to expand...
Click to collapse
Really 100mhz is useless, it uses the same voltages as 200mhz (so uses same amount of power as 200mhz) and you get a lot less performance. Also, from what it have seen I can be unstable for quite a few people. I really can't see any pros to 100mhz. I would recommend you don't use it. So you are using the same amount of energy for less performance and less stability. Hope this helps you
will give you 10 to 30 mins of additional battery life if you configure it properly.
Try siyah kernel and follow the guides in general section
I have a question related to this topic. I know that overclocking can reduce CPU life, but what effect does underclocking? Same CPU life? Maybe it increases the battery life but reduces the CPU life due to CPU not working in the native way?
Haven't found an answer for this yet. It would be useful to know about it since replacing a battery is way more easier and cheaper than anything you could do if CPU dies.
Edit: I'm refering to general underclocking (max and min frequencies, not only the min frequency).
GNRS said:
I have a question related to this topic. I know that overclocking can reduce CPU life, but what effect does underclocking? Same CPU life? Maybe it increases the battery life but reduces the CPU life due to CPU not working in the native way?
Haven't found an answer for this yet. It would be useful to know about it since replacing a battery is way more easier and cheaper than anything you could do if CPU dies.
Edit: I'm refering to general underclocking (max and min frequencies, not only the min frequency).
Click to expand...
Click to collapse
underclocking wont affect the life of your cpu. the least underclock value will only be used when your mobile is almost idle or doing low intensity tasks, it will switch to higher frequency as needed by the task.