please_ can anyone give me a Link for download CF 3D Plugins??
http://forum.xda-developers.com/showthread.php?t=1087427&highlight=chainfire
look closely on third post
once I've found a site with plugins name libGLEMU_xxx.zip ready to use.
I dont know how to use Chainfire3D-API-v1.0. when CF 3D scanned it. plug-in is not found.
can you give me link that has CF 3D plugins with libGLEMU_xxx.zip attached.
theres a README file in that zip file, read it.
or even better, this one
http://bit.ly/yUUonP
Related
k im trying to root my eris iv read alot of forms about it .iwant to do the Application] Eris Master Application [R00T] - xda-developers .i downloaded the full ema im just not shore were the folder goes do i unzip it there is a folder thats say ema files
skd05 said:
k im trying to root my eris iv read alot of forms about it .iwant to do the Application] Eris Master Application [R00T] - xda-developers .i downloaded the full ema im just not shore were the folder goes do i unzip it there is a folder thats say ema files
Click to expand...
Click to collapse
thank you for considering using my application. if you would like to post in my thread, that way you will get the most help from those that are following it, or have already done it, that would be most beneficial for you.
however,
if you want me to walk you threw it, you can hop on the irc channel irc.zifnab06.net channel: #erisroothelp and i am almost always there.
or,
just extract the ema_full folder to wherever you want, my app is dynamic and doest care where you put it. then grab the update file that is up there as well, and replace the old application file with the new one. make sure you have .net 4 installed. i have a download for that as well in my thread. grab the drivers download from my thread and extract those to your desktop. then follow the instructions in my thread for installing those drivers for your phone on your pc. after all that is done, then just start up the app. run backup apps, then follow the root steps 1 - 3, and make sure you read and follow all directions.
where did you get the evil eris 2.0
whojabacod said:
where did you get the evil eris 2.0
Click to expand...
Click to collapse
He was one of the lucky few to get the beta!
I will say i haven't searched for this one yet but i probably will a little later if i don't get any quick responses.
Now to my question. I'm trying to create a cab file that i can use to install some registry changes from the performance tweak thread. The file is specifically based on the memory tweak cab file that is available there but because i use the energy standard 6.5.x series roms there are a couple of tweaks that cause the phone to stop booting correctly. So i have extracted all the original files and modified the xml file appropriately. I've then recompressed them into a new cab file but if i try to install it i get an "not installed successfully error" so obviously i'm doing something wrong but i have no idea what. Anyone got any ideas?
What software did you use to make the cab file?
I actually first tried to create it with winace and that was the problem. Winace just creates the cab as a storage file and not as an installable cab file. I've since searched coz i didn't get a quick reponse and found quickcab. Did the trick nicely. I've tested it on my phone and i've now posted the finished file in the energy rom thread. You will find it here: http://forum.xda-developers.com/showpost.php?p=8078336&postcount=24318
At beginning I create .caps I used QuickCap (in the attachment). In the .zip for you is the Programm and guide only in german but with pictures. I think you can understand it, its very simple. Now i used the WinCE CapMgr, but you must pay for it, so I can't share.
Bonito77 said:
At beginning I create .caps I used QuickCap (in the attachment). In the .zip for you is the Programm and guide only in german but with pictures. I think you can understand it, its very simple. Now i used the WinCE CapMgr, but you must pay for it, so I can't share.
Click to expand...
Click to collapse
Quickcab did it for me and i will continue to use until it my needs exceed it but i have to say i figured out to use it in about 10 seconds (literally). Kudos to the developers for making a very intuitive and easy to use program. Not many out there that are that specialised and that easy to use.
How do I make Live Wallpapers work on my NC ?
My NC
Rooted w/ adb working
Location Services Fix
Adhock Wifi Working
Zeam 2.6
Thibor69 said:
How do I make Live Wallpapers work on my NC ?
My NC
Rooted w/ adb working
Location Services Fix
Adhock Wifi Working
Zeam 2.6
Click to expand...
Click to collapse
http://nookdevs.com/NookColor_Enable_Live_Wallpapers
Is there a way to do this without adb, such as by flashing the zip file?
ADB frightens me.
timmyjoe42 said:
Is there a way to do this without adb, such as by flashing the zip file?
ADB frightens me.
Click to expand...
Click to collapse
Look at the Nook General page at "Work Around" issues. The OP his some tips. I believe #12 or 13 deals with live wallpaper manipulation with root explorer.
Thanks. The link to the file in #12 isn't working for me. Do you know what it was? (Was it the "LiveWallpapers_NC.zip" file?)
Edit: and do you know what the best program for the Root Explorer is? (Root Explorer was about $4. Is there something free out there?)
Doesn't Auto-Nooter 1.0.1 enable live wallpaper? It must, because I didn't do any ADBing or sideloading that I remember.
Cheers,
kev
timmyjoe42 said:
Thanks. The link to the file in #12 isn't working for me. Do you know what it was? (Was it the "LiveWallpapers_NC.zip" file?)
Edit: and do you know what the best program for the Root Explorer is? (Root Explorer was about $4. Is there something free out there?)
Click to expand...
Click to collapse
Try this link (I was able to download from there. Got the link from NookDevs, it should be valid). Root Explorer is the best way to work around adb most times. It is worth the investment. Just follow instructions in work around post.
http://www.multiupload.com/61YYJTKYTV
I am trying an app called "Super Manager" which is free.
I am confused at item #12, where it says to install "this" file. (I assume the zip file is what is being referred ti?)
Once I download the .zip file, How do I install it? Don't I have to flash it? (Am I only trying to install the LiveWallpapersPicker.apk, and moving the other 2 files into the correct directory in addition to setting the permissions?)
timmyjoe42 said:
I am trying an app called "Super Manager" which is free.
I am confused at item #12, where it says to install "this" file. (I assume the zip file is what is being referred ti?)
Once I download the .zip file, How do I install it? Don't I have to flash it? (Am I only trying to install the LiveWallpapersPicker.apk, and moving the other 2 files into the correct directory in addition to setting the permissions?)
Click to expand...
Click to collapse
I did not look at the zip file, sorry. I did notice that there were a couple of scripts with it that looks like the whole thing would be flashed in recovery. I found this stand alone apk for the app which I would feel more comfortable with. Install it per instructions. I got the download link from the attached thread that shares which wallpapers may be working. Good luck
http://www.mediafire.com/?oymijnnydnz
http://forum.xda-developers.com/showthread.php?t=891593
Hello,
After 2 solid weeks of trying to locate hcidump, I need to turn to this group. I've tried flashing various versions from 2.1 to 2.3, stock, custom, etc. I've even looked into compiling this from Bluez source but it's just beyond my skill level.
*** does anyone know a custom ROM that has hcidump tool in it or the binary or any otherway I get get this onto my x10? ***
Thank you very much and I'd be happy to donate to any cause or person that can help me.
found it!
Hi,
Just when I had almost given up, I found this file. You can find it in the CM7 ROM. I was able to go into the update.zip and find it under /system/xbin. I transferred it over and it seems to work.
Thanks
--
proc_rock
Can you post a link or upload the file here?
CM7 ROM
Hi,
Here's the link to the compressed file for the CM7 ROM [looks like I'm too new to post URLs, so here it is in a long way]:
www
multiupload
com
/BE5KF9LCLW
Extract it and you'll see a folder /system/xbin subdirectory is a file called hcidump. That's the only file you need. I went to a different ROM and found a file called update.zip which contained the file. But, this link should get you there.
Copy the file to the X10, set permissions to execute you're in business.
Awesome! I needed this for a droix x2 and it works!
Since the download above is a whopping 101MB I've uploaded the file here
www<dot>mediafire<dot>com/file/bslhsmbftyr48bb/hcidump.zip
(I cant post links either!)
I am having trouble locating this file. It seems many of the links are dead.
I believe the file is named:
RUU_Express_Sprint_WWE_1.18.651.1_Radio_1.05.11.0509_NV_2.28_SPCS_release_192501_signed.exe
Also if someone had the 2.23.651.1 RUU that would be awesome.
In case anyone was curious, some kind user provided the RUU here:
http://forum.xda-developers.com/showthread.php?t=2395467