Hello!
I've recently flashed the ICS OS onto my galaxy s2. However it seems to be a UK version as I cannot agree to the software update agreement along with the time won't update automatically. It seems to be a little glitchy on my phone as well...
Is there anyway I can revert back to the old gingerbread?
Thanks,
Yes its buggy, its an alpha and not really daily driver quality
How to get back to gingerbread: see here
Ya I've tried that link, I went to the link for files under the BELL (Canada) network. And there aren't any .tar files in the downloader. It's cache, factoryfs, and modem then zImage. When I flashed ICS there were .tars.
Any more ideas?
Morphinated said:
Ya I've tried that link, I went to the link for files under the BELL (Canada) network. And there aren't any .tar files in the downloader. It's cache, factoryfs, and modem then zImage. When I flashed ICS there were .tars.
Any more ideas?
Click to expand...
Click to collapse
*sigh* Download the bell firmware, its a .exe, after you run it, it will extract into a .tar
To quote the thread "If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file."
Just shove it into "PDA".
Pleases read the thread.. and flash the bootloaders first, then flash the rom.
Thank you very much. <3
Gotta love noobs....
So saying though, I've reflashed the older bootloader firmware on mine and I'll be stuffed if I can get past a bootloop....
Flashed the KP8 firmware on to test but wanted to go back to older rom...
Tried my stock rom, a few other stock roms and finally went back to KP8..
It was the only one that worked...
Will play around as time permits but doing backshift can REALLY knock you about..
ultramag69 said:
Gotta love noobs....
So saying though, I've reflashed the older bootloader firmware on mine and I'll be stuffed if I can get past a bootloop....
Flashed the KP8 firmware on to test but wanted to go back to older rom...
Tried my stock rom, a few other stock roms and finally went back to KP8..
It was the only one that worked...
Will play around as time permits but doing backshift can REALLY knock you about..
Click to expand...
Click to collapse
Yeh, I know right, im in a bored/good mood so I have patience!
I know that one, worked a double then a nightshift once, I was dead to the world.
I recognise your avatar, did you ever have a HTC hermies, or a blueangle?
As far as the getting back to GB, you should be fine doing;
1) Odin flash old bootloaders
2) Odin flash firmware
Can you get into CWM recovery? Maybe flash something via zip, white cache/data/etc?
Otherwises thats just weird, I have seen peoples phones do weird things after flashing the ICS leaks, like someones refusing to run CM7, even after flashing back old bootloaders and double flashing the CM7 zip.
Im staying away myself, for the time being, however tempted I am
Yep, Hermies it was.....
As I say, I'll kick this puppy hard and make it do what I want or destroy it in the process... Don't like not being able to do as I want... Got a whole heap of roms to flash using cwm and thanks to chainfire I have a kernel that is rooted and has cwm.
Good idea not to try just yet, could be a harsh learning curve..
For reference, I have a chinese made international sgsII with original firmware XWKG1, might be model specific but who knows....
Take out your exteral sd and make sure you flash your old modem back.
ultramag69 said:
Yep, Hermies it was.....
As I say, I'll kick this puppy hard and make it do what I want or destroy it in the process... Don't like not being able to do as I want... Got a whole heap of roms to flash using cwm and thanks to chainfire I have a kernel that is rooted and has cwm.
Good idea not to try just yet, could be a harsh learning curve..
For reference, I have a chinese made international sgsII with original firmware XWKG1, might be model specific but who knows....
Click to expand...
Click to collapse
These uppity electronic devices, cant let them get the better of us!
I am sure there will be some combo of flashes and hand waving that will give it a good kick in the head.
As long as its a i9100 it shouldn't make a difference, still weird though.
Ok, fixed it good...
You need to flash with ODIN 6 times...
!st I flashed stock rom, I had a full screen of red error messages, ignore them. I then flashed cf-root over the top. I got into recovery by holding down up volume, home button and power until sgs logo appeared then released power. Held in other buttons until recovery menu appeared...
I then cleared cache, dalvik cache and then went into mounts and formatted everything (remove your sd card or it will be wiped too).
Flash stock with Odin a second time, the cf-root a 2nd time. Repeat above steps but also in advanced fix permissions.... Also do a full wipe of data..
Flash with ODIN a 3rd time, 1st stock then cf-root... You should be back up and running... Now flash away with whatever rom you please and leave KP8 alone until its easier to fix...
Sorry if this doesn't make a lot of sense and its possible I did a few steps more than I needed but I just got home after a lovely night at work and REALLY need sleep...
Cheers, hope this helps....
Thats just mental, glad you got it working though
veyka said:
These uppity electronic devices, cant let them get the better of us!
I am sure there will be some combo of flashes and hand waving that will give it a good kick in the head.
As long as its a i9100 it shouldn't make a difference, still weird though.
Click to expand...
Click to collapse
guys i need some help .. i flashed 4.0.3 on my SGS2 ..as we know the rom is quite buggy so i tried going back to 2.3.6. Here is what happens..
I flashed stock GB using odin .. phone boots but takes me to the 'emergency dial' screen with a finger constantly telling me to touch the android... at the same time i'm getting thousands of FC messages.
I've tried restoring backups of my GB rom, the one i was using before flashing ICS but all the backups fail..saying 'system.img' file not found
I've tried flashing 2 differnet roms using odin but the same happens. .. i'm forced to only flash the laggy buggy ICS rom but i want to go back to GB
A step by step guide will be much appreciated.
Thanks
shehadl said:
guys i need some help .. i flashed 4.0.3 on my SGS2 ..as we know the rom is quite buggy so i tried going back to 2.3.6. Here is what happens..
I flashed stock GB using odin .. phone boots but takes me to the 'emergency dial' screen with a finger constantly telling me to touch the android... at the same time i'm getting thousands of FC messages.
I've tried restoring backups of my GB rom, the one i was using before flashing ICS but all the backups fail..saying 'system.img' file not found
I've tried flashing 2 differnet roms using odin but the same happens. .. i'm forced to only flash the laggy buggy ICS rom but i want to go back to GB
A step by step guide will be much appreciated.
Thanks
Click to expand...
Click to collapse
See this post: clickme
veyka said:
See this post: clickme
Click to expand...
Click to collapse
I think my situation has worsened now.. i flashed the old bootloaders using ezodin and it got stuck at 'setting up connection' .. now any file that i flash using odin gets stuck at the same and doesnt go beyond. trying recovery says 'error encountered while upgrading firmware' try recovery mode in kies.
what do i do now?
shehadl said:
I think my situation has worsened now.. i flashed the old bootloaders using ezodin and it got stuck at 'setting up connection' .. now any file that i flash using odin gets stuck at the same and doesnt go beyond. trying recovery says 'error encountered while upgrading firmware' try recovery mode in kies.
what do i do now?
Click to expand...
Click to collapse
<removed link to something you shouldnt use>
Thats for i9000, I dont know if it will work with i9100, and may have bricked your phone.
Should have just used standard odin
Can you get into download mode?
Do you have a backup of the stock or another rom that you can then revert back to stock from?
Just curious as to what the issue is, ICS is running fine for me, only issue is the video codecs which I knew about. Maybe a reflash would help if its glitchy?
veyka said:
Oh dear, did you use this: clickme?
Thats for i9000, I dont know if it will work with i9100, and may have bricked your phone.
Should have just used standard odin
Can you get into download mode?
Click to expand...
Click to collapse
OMG...How could you give him that link? Now he has a serious problem...
i got myself back into ics using odin.. then i flashed old bootloaders.. and flashed stock GB again...result is still the same.. takes me into that emergency call screen with many FCs..
how do i go about it now....
I wouldnt want to change back if the battery wasnt so bad with ics and the number of times it hangs my phone was less ...
---------- Post added at 10:32 PM ---------- Previous post was at 10:26 PM ----------
i guess what i need is correct bootloaders for i9001. any ideas where i can find those?
Lennyz1988 said:
OMG...How could you give him that link? Now he has a serious problem...
Click to expand...
Click to collapse
I didnt give him that, he said he used ezodin and that was what I found when i looked for ezodin, I was asking if he used it Thankfully he didnt.
shehadl said:
i got myself back into ics using odin.. then i flashed old bootloaders.. and flashed stock GB again...result is still the same.. takes me into that emergency call screen with many FCs..
how do i go about it now....
I wouldnt want to change back if the battery wasnt so bad with ics and the number of times it hangs my phone was less ...
---------- Post added at 10:32 PM ---------- Previous post was at 10:26 PM ----------
i guess what i need is correct bootloaders for i9001. any ideas where i can find those?
Click to expand...
Click to collapse
Ok, so you have bootloader from gingerbread back on your phone?
If you had flashed i9000 bootloaders onto your i9100 you would have bricked, you haven't, we are all good.
Now you just need to fix the FC'ing, what stock rom are you flashing?
Related
Ok, I was restoring my phone to stock with odin following these stpes
Disable Voodoo
Odin to eugenes froyo that wont brick
sticks at vibrant screen
tried odining to JFD
odin completes but still hangs at the vibrant screen
I have tried with and with out repartition checked and I am able to enter and exit download mode freely, I have tried 3 differnt versions of odin and 2 different downloads of the pda and pits. Any help would be great.
EDIT, Odin is finishing at the pass stage when the phone attempts to boot Currently flashing the JI6 seeing if it works.
Still not getting anywhere, I have now tried to odin to eugenes froyo, JFD, JI6, all which end the same with out a boot screen, I can get download but no recovery.
From my understanding when you flash eugenes froyo that wont brick the boot animation should change to the international one, mine has not done that so I am starting to wonder if there is an issue with the flashes themself.
How long did you wait after flashing the stock firmware? The first boot usually takes a while after an Odin. Did Odin finish flashing everything to the point that it said restart in blue?
You can find instructions to revert to stock http://forum.xda-developers.com/showthread.php?t=734475
I've gotten myself out of some pretty bad "bricks" with JFD and ODIN... make sure you also use the stock .pit file and you can check repartition, use JFD and should fix you right up.
I have waited for 10-15 minutes after it says restart and then sometimes after it says pass, and I have done to jfd and stock pit.
left phone at boot fell asleep woke up hr or so later still at vibrant screen, still cannot access recovery but can access download mode.
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
iynfynity said:
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
Click to expand...
Click to collapse
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
ionic7 said:
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
Click to expand...
Click to collapse
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
iynfynity said:
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
Click to expand...
Click to collapse
Yes read the first post it says what i have flashed.
Charlie Brown said:
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
Click to expand...
Click to collapse
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
ionic7 said:
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
Click to expand...
Click to collapse
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
ionic7 said:
Yes read the first post it says what i have flashed.
Click to expand...
Click to collapse
try that again.
Sent from my SGH-T959 using XDA App
Im having the same issue with, "Data Wipe Failed" and have 0.00 space in Application storage but my phone reboots into eugenes 2.2 perfectly fine and works, but the application storage seems to be empty still...very frustrating.
cvibe88 said:
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
Click to expand...
Click to collapse
have changed usb cord, port, computer, have flashed jfd ji6 froyo that wont brick, 512 pit,513 pit,and they have not laughed at me in anyway they are sending my new phone now and a g2 to try out soo either way I have something soon. I also was going from axura to stock to a custom rom not from one to the other and I do know how to use odin, I know what I am doing just need help figuring this one out has to be something im missing or its just not gonna work. 50 odins and nothing kinda says it all.
I am in the same boat.. tried ODIN + stock ROM from various sources, nothing seems to work.. am I out of luck ??
Hi guys, just new to these forums. I was forced to sign up due to my problems. just about 2 days ago i flashed these to my Galaxy Note Korean unit (SHV-E160S):
Tegrak-Kernel-Build-32-for-SHV-E160S-FA09.zip
Tegrak-Kernel-Build-32-for-SHV-E160S-FA09recovery.tar
i used Odin to flash the recovery file then booted into recovery mode to flash the kernel.. im sure i did right because i was able to use superuser and change my boot animation. unfortunately i found another update to the .tar and .zip file. i'm pretty sure its for my phone too so i went ahead and did the same thing. i kinda made a mistake in the process, i think i wiped the cache and all. dunno if i wiped partition but in the end i am only able to go to recovery & download mode. the Note will power up but won't get past the "Galaxy Note" screen. after that i will just be black. it's weird because it can still connect to Odin on my laptop although the screen is still black. is it a soft-brick? right now i'm trying to download an ICS stock rom and will try flashing it with Odin. i someone can help me please do. sorry by the way if this is a Korean Galaxy Note. this is the best category i could post since the AT&T and the SHV-E160S are the same in specs and all. hope someone could help me and spare me the pain from sending my unit for repair!
Sounds like a soft brick.. it seems you flashed perhaps the wrong file the last time otherwise it would be working like the last flash? ..I don't use odin often but I would restore my backup or just start over and use the last files to flash until you find something different
yeah i tried the others. i am able to flash the 1st recovery.tar but i cant seem to copy the .zip kernel because i dont have access to usb
about to flash stock ICS using Odin, hope this works! i just have one file which is a .tar file, hope this is the right file and don't brick!
OMG, i just pissed my pants *kidding*, the flashing of the stock ROM worked! and not onl that, i'm on ICS! all thanks to xda=developers forum for giving me the idea to flash a stock ROM! thanks guys! i'll never root my phone again i'd rather stay safe. thanks for the reply friend! ICS rocks!
Could you give me stock ics rom for e160s? thanks
chelsea123 said:
Could you give me stock ics rom for e160s? thanks
Click to expand...
Click to collapse
WRONG FORUM
plz search next time
at least
or use google
SMDH
ok, I need some help here..
was running rooted ics roms for weeks now, and was trying to go to the new cm 9 nightly today.
I was using twrp for recovery, and it would not flash that way, so I went back to cwm recovery.
Then, I tried to flash h0tw1r3's version of cm9 first, then I would flash the new cm 9 nightly; never got to that point..
After flashing that, i went into a boot loop, so i want back to cwm, and tried to wipe, and flash it again, but I got locked up in cwm, with no menus at all..
Well, I decided to just Odin back to factory, which didn't work; both rooted stock GB, and unrooted stock GB...I am not a veteran of odin,and, since I am on a mac, I ran it in a virtual machine, the same way I originally did it when I got the phone months ago. It goes through all the steps that make it look like it worked, but, once the phone reboots, I get the first and second "samsung" screens, but then the screen just stays black, and nothing happens..
I can get into download mode, and, flash via odin, and it says "success", and looks like it should work, but it doesn't...
Can anyone suggest something else to try, or, maybe the proper .tar file to try?
I think my phone is probably still on an ICS leak, and that might be the problem. but, obviously, I can't get it to boot, no matter what I flash through Odin..
Thanks so much to anyone who can help..I am hoping I don't have a brick,which I don't think I have, since I can get into download mode with no problems...
EDIT: Got it to work with a stoick tar from Dar8!!
Good job
thanks..
wase4711 said:
thanks..
Click to expand...
Click to collapse
cool beans...can ya put solved in the title sir...thx
bigjoe2675 said:
cool beans...can ya put solved in the title sir...thx
Click to expand...
Click to collapse
done...thanks for reminding me!
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
This worked for me
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
seerenr since
Devil-Dog said:
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
Click to expand...
Click to collapse
my problem is not really with rooting the phone, it is rooted i just cant flash roms. whenever i try to flash a rom it reboots and gets stuck on the vibrant screen (bricked) so i have to take it back to stock
thanks though
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
i have re-flashed recovery multiple times i wish there was another type of recovery i could install
on another note im trying to install android 4.2.2 SlimBean and 4.3.3 and i dont know what bootloader i have nor how to check it, id appreciate it if u could show me how to check wich one i have and how to up it
thanks
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
the combo i have to do for recovery is volume up and down and the power button simultaniosly
elpromo01 said:
the combo i have to do for recovery is volume up and down and the power button simultaniosly
Click to expand...
Click to collapse
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
firefly6240 said:
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
Click to expand...
Click to collapse
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
elpromo01 said:
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
Click to expand...
Click to collapse
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
elpromo01 said:
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
Click to expand...
Click to collapse
Glad you figured it out. Just so you you know, your phone says GT-I9000 because you flashed gingerbread bootloaders. They provide better button combinations to recovery and download modes, much easier than stock combos.
Sent from my SGH-T959 using Tapatalk 2
Good to know, thanks!!
Sent from my SGH-T959 using xda app-developers app