Related
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Finally I've made a move. TyTN X Sony Crossover Custom Headphones.
I've used a solder to remove the original earbuds wire and soldered a pair of cut SONY MDR-EX71SL headphones on. They sound 100 times better than the stock ones. This will ease my frustrations for now. I was tempted to solder my MDR-EX90LP on but they are $100 a pair. Too much for now
Later on I will try to rework the stock mini USB headphone and make a 2.5mm connector for it so I can use all kinds of headphones(with mic) and connect to a speaker system as I want!
EDIT: It appears that the original mini USB headset has 6 wires, 4 should be for the headphones and the remaining 2 for the mic, I can simply cut up the wire right after the mini USB port and connect the 6 wires to a standard cell phone headset 2.5mm connector then I should be able to connect the TyTN to all kinds of headsets![/img]
Arent you essentially doin this? http://www.4winmobile.com/tutorial-replace-hermes-headset-connector-with-35mm-socket-vt3146.html as seen in another post, seems like the most universal way to solve the problem.
I do like the way you built a set without a plug, cleaner..less cord and weight, but I know myself, I go through a pair of headphones about every 2 months on my mp3 player, Id hate to have to redo the soldering everytime, I expect with the headphones being such an issue for most peple that the market will be flodded in a month or so with headphones for the tytn, or atleast adapters, shoot, the one guy in the above url even offered to do it for free, as long as you bought the plug.
is there still no adaptor available to buy?
i just do this way........
can swap any earpiece....
crash74 said:
i just do this way........
can swap any earpiece....
Click to expand...
Click to collapse
@crash74
Looks very good, even more solid than the other solution, but how do you open the unit to reach the print, is their any trick?!
Can i also use the new connection as a line-out for little active stereo boxes, or is this to tricky for TyTn/boxes?
worked like a dream i have no more crapy hissing inbetween tracks and now i can play my song thu my hi-fi that 1 to the modders and 0 to htc
Adapter usb to 3.5 jack
Go to semsons.com, they have the adapter
qing84, I have the same headphones as u=) firstly I solve this problem like you, but I smash the small "black box"=) with mic and volume control, and i was need connect my mdr-ex71 directly to TyTN without "black box"=(
I was glad that i did it, because sound became much more louder, and more clean...
qing84 said:
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Click to expand...
Click to collapse
umm...you could have just bought this.... http://www.cellphoneshop.net/auadforci85.html
i think its a good idea to replace the head phone leaving the mic in workin condition.as there is no connector is still available at least in my town.i ll try it tomorrow.thanx dude
Guys,
I bought a cradle from ebay (leeonline) because I cannot get a 4 in 1 adaptor from HTC. I tried using the vga-out (17 inch CRT Monitor), rca video out (our Television Set), Brandless USB hub, Generic/standard USB Keyboard and Generic/standard USB Mouse on it all at the same time. Everything works.
Now, I really no longer bring my laptop to work. My athena is all I need for Word Processing, Spreadsheets etc. There are quirks though. Sometimes, the mouse stops working or the athena hangs. (It may be the amount of programs installed.) Then again, It is still faster to boot than my laptop. The other downside is that even with the cradle plugged to the adaptor, It will still consume energy from the battery of the unit.
What I have done to my athena may not be new to most people but I would like to hear from other people what attachments or modifications they have done to make their athena more useful and powerful. In this way, we can all benefit from these ideas. Thanks!
Thanks!
yetdy said:
Guys,
I bought a cradle from ebay (leeonline) because I cannot get a 4 in 1 adaptor from HTC. I tried using the vga-out (17 inch CRT Monitor), rca video out (our Television Set), Brandless USB hub, Generic/standard USB Keyboard and Generic/standard USB Mouse on it all at the same time. Everything works.
Now, I really no longer bring my laptop to work. My athena is all I need for Word Processing, Spreadsheets etc. There are quirks though. Sometimes, the mouse stops working or the athena hangs. (It may be the amount of programs installed.) Then again, It is still faster to boot than my laptop. The other downside is that even with the cradle plugged to the adaptor, It will still consume energy from the battery of the unit.
What I have done to my athena may not be new to most people but I would like to hear from other people what attachments or modifications they have done to make their athena more useful and powerful. In this way, we can all benefit from these ideas. Thanks!
Thanks!
Click to expand...
Click to collapse
I used to do that, but the novelty wore off eventually. Now i just bring in a mini notebook. It's easier than carrying loads of bits about and connecting things to monitors (though that option is still there if necessary).
Pretty cool though if you like your gadgets.
Leoni is correct, however he can always leave the other stuff connected to the cradle and use it sorta like a docking station, but you would need a second cradle for the home TV. I'm glad this thread started because I myself was considering getting one for my TV. However, what should I do about the audio coming from my device (will I still be able to connect audio to my AV receiver)? As far as the 4 in 1 cable I would be able to get to the audio jack on the Athena however the down side is that not all USB flash drives would be supported with the 4 in 1 cable. Yetdy can you tell me how you work around getting audio streamed?
I think there are a few ways to stream audio.
#1 S-Video if I'm not mistaken is supposed to stream audio to your TV.
#2 Audio Jack to RCA Audio converters connected directly to the TV or amplifier would also help assumming you are using the 4-in 1 adaptor. Cradle cannot help you out with this option.
#3 Of course there is bluetooth connection which is what I am going to use. Got a bluetooth transmitter and receiver from ebay but is currently busted (bad seller). Another is to get a BT that has a changeable earphone/buds. Change the earphone to an audio jack to RCA Audio jack and follow #2.
Hope this helps.
yes and no
yetdy said:
I think there are a few ways to stream audio.
#1 S-Video if I'm not mistaken is supposed to stream audio to your TV.
****You are mistaken, S-video is video only (the pins are luminance, chroma, ground and something else I can't remember off the top of my head) ****
#2 Audio Jack to RCA Audio converters connected directly to the TV or amplifier would also help assumming you are using the 4-in 1 adaptor. Cradle cannot help you out with this option.
****if it is anything like the one I got from ebay then no, as it covers up the headphones out port from the athena but does not replicate it on the back ! the athena also carries audio out from the same USB connector that you charge it from (this is why the socket on the athena is an unusual/different shape compared to your plug on USB charger) if they had replicated this port propely on the dock then you could have got audio out that way, but the dock connector for that is also wrong (standard USB shaped socket, not the odd one from the athena) ****
#3 Of course there is bluetooth connection which is what I am going to use. Got a bluetooth transmitter and receiver from ebay but is currently busted (bad seller). Another is to get a BT that has a changeable earphone/buds. Change the earphone to an audio jack to RCA Audio jack and follow #2.
****it is feasible to have the athena transmit stereo bluetooth to a nearby device !****
Hope this helps.
Click to expand...
Click to collapse
just my 2 pence worth
If you want to play audio on your home theatre speaker, you could also consider the option of plugging an FM transmitterinto the headphone jack, then use your FM receiver to play through your theatre speaker.
That was how I used to play my music in the car, through the car's srereo speakers.
eaglesteve said:
If you want to play audio on your home theatre speaker, you could also consider the option of plugging an FM transmitterinto the headphone jack, then use your FM receiver to play through your theatre speaker.
That was how I used to play my music in the car, through the car's srereo speakers.
Click to expand...
Click to collapse
wont work if the Athena is in the ebay dock/cradle, as it covers up the audio out port, but does not replicate it.
Ice coffee,
Maybe you can share some other options here. You may have other ideas that may be useful to us. I just got my athena last month and cradle last week so I cannot really say with authority what it can and what it cannot do. If you can help us out in maximizing the athena with its cradle, many will appreciate it.
None of the video outputs from the 4-in-1 carry audio, the only options are BT a2dp or the headphones jack. Seems a bit long-winded to me though - I'm sure there are less fiddly mods out there. I just used to use the magnetic keyboard as a stand, slipped a BT keyboard over the top of it and the 4-in-1 for usb hub etc. This left a free audio jack to use as I wished. Seems like the docking station is more of a hindrance than a help.
HTC Advantage
Docking station
Keyboard
Mouse
Hifi Bluetooth A2DP adaptor
USB Hub....
I think my EEE pc is a more convenient device on the whole than the above setup would've been if i'd carried all that with me I wouldn't have had any space to fit my work stuff!
I came accross another docking station for $119.00 USD that has the audio option on the side along with 2 standard USB ports instead of 1. I think it's a bit too pricey, due to the fact that on flebay they do have a2dp stereo bluetooth adapters for like $50 USD. Besides with that and your bluetooth headsets it might still be possible to answer a incoming phone call on your bt headset without having to hear the audio coming from your A/V receiver (considering you left the phone on). Leoni, both options have their own drawback (no powering source with the 4 in 1 cable for all USB storage devices and the inaccessable headphone jack when using the docking station). But anyway I'm going to order the 4 in 1 cable too and see which one works best for me on a day to day use.
as I said the only simple option is to use bluetooth and as tootalk2000 pointed out you can get adaptors on ebay for £25 ish, I suppose the other more complicated option would be to, take your cradle apart and replace the USB connector into the phone with this,
http://cgi.ebay.co.uk/2in1-Audio-US...oryZ3728QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and then take the other end of this apart and make it fit in your cradle, it would actually be quite easy to do as there is a lot of space in the cradle.
ice_coffee said:
as I said the only simple option is to use bluetooth and as tootalk2000 pointed out you can get adaptors on ebay for £25 ish, I suppose the other more complicated option would be to, take your cradle apart and replace the USB connector into the phone with this,
http://cgi.ebay.co.uk/2in1-Audio-US...oryZ3728QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and then take the other end of this apart and make it fit in your cradle, it would actually be quite easy to do as there is a lot of space in the cradle.
Click to expand...
Click to collapse
Awwwww shux, someone just gave me some experimenting to go do. I'm ordering one of those jacks today, and hopefully it will come around the same time as cradle. I'll just super glue it to the back portion of the cradle and plug it in externally. Due to the fact that the USB port is still on there you would still be able to sync even when the ear phone jack is still in use.
tootallk2000 said:
Awwwww shux, someone just gave me some experimenting to go do. I'm ordering one of those jacks today, and hopefully it will come around the same time as cradle. I'll just super glue it to the back portion of the cradle and plug it in externally. Due to the fact that the USB port is still on there you would still be able to sync even when the ear phone jack is still in use.
Click to expand...
Click to collapse
lol my thoughts exactly.
I was at work the other week and had a slight problem.. how the hell do i get music from a TG01 into a sound desk.. I tried to use the micro USB to 3.5mm adapter with a 3.5 to 3.5mm cable into the desk AUX input, we also tried using a 3.5 to RCA cable... the final thing we tried to make sure it wasnt a problem with the desk was to go straight into the DJ mixer using a 3.5mm cable. nothing worked. but Iphones, Ipod, other MP3 players all work using this method...
any ideas folks?
Have you tested the supplied USB to 3.5mm with a normal earbud? do you get sound out of it?
The USB to 3.5mm cable is just a simple Analog Left/Right/Ground port and so it should work with any Stereo plug regardless of the destination
I suspect that the USB to 3.5mm you used is busted
you can also use a bluetooth adapter with 3,5mm plug, the one i use was 32,- euros and works perfect
Wandy_1974 said:
Have you tested the supplied USB to 3.5mm with a normal earbud? do you get sound out of it?
The USB to 3.5mm cable is just a simple Analog Left/Right/Ground port and so it should work with any Stereo plug regardless of the destination
I suspect that the USB to 3.5mm you used is busted
Click to expand...
Click to collapse
Not at all.
The TG01 does require a certain resistance to be presented to the device and it is this which it interprets as to how to respond.
If the two data lines D- and D+ are shorted, it will go into Charge mode. If it sees a resistance of around 20 Ohms or more it will switch the audio output to the micro USB port. Typical earphones will have an impedance of around 30 Ohms, while the input to many battery powered external speakers is 4 or perhaps 8 Ohms (ever lower on amplifiers). This is why your TG01 worked fine into the earphones but not your external feed.
This texts it's not mine (just the blue one). It was written for the great kevinpwhite, on MODACO some time ago. And it's true (I've made the resistor modification in a set of stereo amplified speakers than failed as Tomsutton said and now they work perfectly.)
You can read the full explanation here: (I'm xdalover on Modaco )
http://www.modaco.com/content/toshiba-tg01-tg01-modaco-com/298887/headphone-amplified-sound-output/
(from post #7)
Have a nice day
Pere said:
Not at all.
The TG01 does require a certain resistance to be presented to the device and it is this which it interprets as to how to respond.
If the two data lines D- and D+ are shorted, it will go into Charge mode. If it sees a resistance of around 20 Ohms or more it will switch the audio output to the micro USB port. Typical earphones will have an impedance of around 30 Ohms, while the input to many battery powered external speakers is 4 or perhaps 8 Ohms (ever lower on amplifiers). This is why your TG01 worked fine into the earphones but not your external feed.
This texts it's not mine (just the blue one). It was written for the great kevinpwhite, on MODACO some time ago. And it's true (I've made the resistor modification in a set of stereo amplified speakers than failed as Tomsutton said and now they work perfectly.)
You can read the full explanation here: (I'm xdalover on Modaco )
http://www.modaco.com/content/toshiba-tg01-tg01-modaco-com/298887/headphone-amplified-sound-output/
(from post #7)
Have a nice day
Click to expand...
Click to collapse
Cheers pete, Il dig out the specs of the desk and see what the resistance is, I dont remember it going into charging mode though..
Why would an Ipod work but the TG01 wont?
tomsutton529 said:
Cheers pete, Il dig out the specs of the desk and see what the resistance is, I dont remember it going into charging mode though..
Click to expand...
Click to collapse
If standard headphones works and aux IN don't work, no doubt. This is the origin of your problem
tomsutton529 said:
Why would an Ipod work but the TG01 wont?
Click to expand...
Click to collapse
Easy, an Ipod has a dedicated analogic output. Instead TG01 has a shared USB port with different uses...
Noticed this on mine when I wanted to play music from the phone on my stereo. VERY annoying, and a bit daft of them to do this, even though it's a shared port.
There should be a software option to enable the usb port for purely sound to allow it to pass it across. I see the hardware resistive work as a workaround not the solution (although well done on getting it working!!)
no way. toshiba support:
"There are no settings available on the phone in order to set up the electrical resistance."
tomsutton529 said:
I was at work the other week and had a slight problem.. how the hell do i get music from a TG01 into a sound desk.. I tried to use the micro USB to 3.5mm adapter with a 3.5 to 3.5mm cable into the desk AUX input, we also tried using a 3.5 to RCA cable... the final thing we tried to make sure it wasnt a problem with the desk was to go straight into the DJ mixer using a 3.5mm cable. nothing worked. but Iphones, Ipod, other MP3 players all work using this method...
any ideas folks?
Click to expand...
Click to collapse
With thanks to Pere for the kind words above re. my earlier explanations on this subject on MoDaCo....
....in addition, please note that all of these charactaristics are an intentional part of the micro USB AB 'On The Go' port design and will become increasingly the norm as more devices adopt uUSB.
There is at least one chip being manufactured, but as yet not available to individual purchasers, which will support an external plug in device capable of providing intelligent charging combined with concurrent audio out. Sort of configuration applicable to eg. a car hands free scenario. I imagine that such add-ons will start to become available in due course - this is one of the drawbacks of choosing what is still a leading edge device well over a year after it first appeared !
For the mixing desk input, I'd suggest using an isolating transformer (eg. these here) as the ideal means of coupling - this will provide the necessary impedance (typically >10kOhms) to make the TG01 respond with an audio output while also ensuring electrical separation and maintaining as high quality audio signal as possible.
This seems to be a known problem, but after a day of research, I still don't see a solution, or really understand if this will eventually be fixed by (1) a developer update by someone here much smarter than me, (2) a Samsung update, or (3) will never be fixed.
Issue is:
When the SGS3 headphone is engaged (ie: a stereo phone cable from my SGS3 to my car AUX input), you cannot hear and calls in or out from the built in auto bluetooth (mine is an Audi A3). I've tested many alternatives seen on these forums including, TTY settings, call settings, grinding down the stub of the cable so it doesn't fully engage the headphone, etc.
All to no avail, as when the headphone is engaged (a notification of this pops up on the screen), the default sounds ALL go to the headphone source. Of course, the car mutes the audio mode when the bluetooth is enabled, so the sound is lost! What needs to happen is that the phone needs to allow the phone sounds to flow through the bluetooth. Why this doesn't happen by default confuses me. Never had a problem with my HTC Inc2.
Can a solution to this be developed by some of you talented guys out there working on fixes and mods?
[email protected] said:
This seems to be a known problem, but after a day of research, I still don't see a solution, or really understand if this will eventually be fixed by (1) a developer update by someone here much smarter than me, (2) a Samsung update, or (3) will never be fixed.
Issue is:
When the SGS3 headphone is engaged (ie: a stereo phone cable from my SGS3 to my car AUX input), you cannot hear and calls in or out from the built in auto bluetooth (mine is an Audi A3). I've tested many alternatives seen on these forums including, TTY settings, call settings, grinding down the stub of the cable so it doesn't fully engage the headphone, etc.
All to no avail, as when the headphone is engaged (a notification of this pops up on the screen), the default sounds ALL go to the headphone source. Of course, the car mutes the audio mode when the bluetooth is enabled, so the sound is lost! What needs to happen is that the phone needs to allow the phone sounds to flow through the bluetooth. Why this doesn't happen by default confuses me. Never had a problem with my HTC Inc2.
Can a solution to this be developed by some of you talented guys out there working on fixes and mods?
Click to expand...
Click to collapse
Maybe if you go into the control panel of your car's built in computer and check the audio and Bluetooth settings it has, that might fix things.
Thread moved
This does not belong in Development.
So you have bluetooth for phone only and younlisten to your music with aux in? I would say if you had an aux in cable with the mic on it like the headphones, then the phone audio would go out over to the radio... But do they make those or how hard would it be to hack your free headphones you got into a double male aux cable
There are no options anywhere in the car settings.
Car mutes phone audio.
Juicy92 said:
So you have bluetooth for phone only and younlisten to your music with aux in? I would say if you had an aux in cable with the mic on it like the headphones, then the phone audio would go out over to the radio... But do they make those or how hard would it be to hack your free headphones you got into a double male aux cable
Click to expand...
Click to collapse
The sound does go through the phone audio already. But like almost all cars, when the car sees a bluetooth call in or out, it MUTES the audio coming in from the radio, the CD, or any AUX input. The phone should send call audio through bluetooth, but it does not.
Is it not possible to either play the music through the bluetooth or to turn off bluetooth all together. The phone mic would pick up wouldn't it
This is only possible if you have a newer car stereo with A2DP.
Sent from my SCH-I535 using xda app-developers app
So is this just a Samsung problem for me, or for all?
So I am correct that nobody with a bluetooth car phone setup (but no bluetooth streaming) is able to plug their headphones into their aux jacks and still make/receive calls?
Or is this related just to the SGS3? Or just to my Audi bluetooth options?
Would an eventual solution come from a xda brainiac update, from Samsung, or somewhere else?
Do some of you have built in car setups (no bluetooth streaming) that DO WORK with the headphones plugged in?
I can attempt to pair to my brothers car today or tomorrow if that will make you feel better. My bluetooth setup is aftermarket and streams both
I am also curious as to what happens if you don't have bluetooth enabled at all
What about car audio only. Wouldn't it automatically mute your music and then throw the call over bt or is the aux out overpowering the bluetooth signal. Let me look for a way to possibly disable the process that starts when you plug in headphones. Don't count on anything though
---------- Post added at 01:11 AM ---------- Previous post was at 12:52 AM ----------
I was doing a little brainstorming here and even though I am quite a novice with tasker, you may be able to make a task that pauses music and transfers call to bluetooth when both bluetooth and headphones are connected. I am not sure if it is an input device problem or if the phone is just dumb or what, but it may be worth a shot
Juicy92 said:
I can attempt to pair to my brothers car today or tomorrow if that will make you feel better. My bluetooth setup is aftermarket and streams both
I am also curious as to what happens if you don't have bluetooth enabled at all
What about car audio only. Wouldn't it automatically mute your music and then throw the call over bt or is the aux out overpowering the bluetooth signal. Let me look for a way to possibly disable the process that starts when you plug in headphones. Don't count on anything though
---------- Post added at 01:11 AM ---------- Previous post was at 12:52 AM ----------
I was doing a little brainstorming here and even though I am quite a novice with tasker, you may be able to make a task that pauses music and transfers call to bluetooth when both bluetooth and headphones are connected. I am not sure if it is an input device problem or if the phone is just dumb or what, but it may be worth a shot
Click to expand...
Click to collapse
Your setup is not like mine, and should probably work, as you don't have to plug in the headphone jack. Yes, the problem is that IF the headphone jack is plugged in, ALL sound output goes through that and the bluetooth is disabled (even the symbol on the phone screen is grayed out.
With your bluetooth plugged in, just try putting the earbuds in the phone, then make a call to anyone, then see if your bluetooth icon on the phone call is not grayed out. Now unplug the ear buds and see if the icon doesn't come back on. This is the problem I have.
Never had any problems with either stereo worked fine in my altima and benz. I used aux + bluetooth no problem on my epic4g for the past 2 years and when I first got my s3 it was working until I did an update. Then it broke it.
Sick of having to unplug the aux cable everytime I get a call to allow it to switch to bluetooth
Need some people to test this, please...
I'd like to see if the problem is with the rooted phone image or if this problem also exists on stock, unrooted phones.
If you can:
1) pair your phone to your factory car bluetooth, or even a bluetooth headset that does not stream audio.
2) have any pair of headsets or an aux cable ready to plug in.
3) make a call using the bluetooth to anyone (ideally something that has an automatic answer phone cue like this 919-238-2000)
4) while the call is proceeding with the car bluetooth or bluetooth headset, plug in the headphones, or any cable into the headphone jack.
5) WHAT HAPPENS???
Is it (a) you still hear the phone call through the bluetooth, or
(b) you don't hear the call any more and the bluetooth headset icon on the phone pad goes out?
6) Please state what phone you have, what provider you have, and whether the phone is stock or rooted.
THANKS.
[email protected] said:
I'd like to see if the problem is with the rooted phone image or if this problem also exists on stock, unrooted phones.
If you can:
1) pair your phone to your factory car bluetooth, or even a bluetooth headset that does not stream audio.
2) have any pair of headsets or an aux cable ready to plug in.
3) make a call using the bluetooth to anyone (ideally something that has an automatic answer phone cue like this 919-238-2000)
4) while the call is proceeding with the car bluetooth or bluetooth headset, plug in the headphones, or any cable into the headphone jack.
5) WHAT HAPPENS???
Is it (a) you still hear the phone call through the bluetooth, or
(b) you don't hear the call any more and the bluetooth headset icon on the phone pad goes out?
6) Please state what phone you have, what provider you have, and whether the phone is stock or rooted.
THANKS.
Click to expand...
Click to collapse
I'm pretty sure I wasn't rooted the first time I tried it. In any case, I wrote to Samsung support on Facebook, and got this reply:
"Hi Chris, thanks for reaching out! You are correct, you cannot use both Bluetooth and Aux at the same time. A few of our customers found a work around by using an A2DP profile with hands free in the car. I apologize for the inconvenience."
So we know they are getting reports or they wouldn't push AD2P as a solution. I think if enough people write in, they will fix this in an update. We really need a critical mass of people to complain to Verizon and Samsung for this to happen. He did say when I replied asking about a fix, that he had passed my concerns on, etc., etc.
Mention "lawsuits from car accidents" when you write in...
sluzbenik said:
I'm pretty sure I wasn't rooted the first time I tried it. In any case, I wrote to Samsung support on Facebook, and got this reply:
"Hi Chris, thanks for reaching out! You are correct, you cannot use both Bluetooth and Aux at the same time. A few of our customers found a work around by using an A2DP profile with hands free in the car. I apologize for the inconvenience."
So we know they are getting reports or they wouldn't push AD2P as a solution. I think if enough people write in, they will fix this in an update. We really need a critical mass of people to complain to Verizon and Samsung for this to happen. He did say when I replied asking about a fix, that he had passed my concerns on, etc., etc.
Mention "lawsuits from car accidents" when you write in...
Click to expand...
Click to collapse
I have an issue when it's plugged in via Auxiliary there's a nasty echo the caller hears on the other end because of this headphone mode. Anyway to turn it off?
I will probably return it for this reason amongst others.
Belkin Y37 from Amazon will solve this issue, or provide an alternative.
I can fully confirm the functionality of the Belkin F8Z492TTP. It is now custom installed in my A3 with a direct power hookup and direct connection to the aux input. For power, I had to hook up a 12 volt car outlet behind the dash, insert a 12v to usb adapter, and splice the power cord from the factory transformer to a USB cable. Power is with a micro type H plug that Radio Shack does not have. They should give you a usb to type H cable with it.
Anyway, the Galaxy S3 will connect to two bluetooth devices at the same time...the Audi bluetooth and the Belkin Y37 Bluetooth. I put a shortcut button for bluetooth on my home screen which pulls up the options. You DO HAVE TO RECONNECT BLUETOOTH each time you get in the car, but you had to manually plug in the cable the other way.
When a call is made, the car bluetooth takes over with full steering wheel controls, and when it ends, the audio goes back on (I think automatically). Since I have constant power to the Belkin through the 12v, if you step away and then come back, you can automatically regain your connection, which is nice.
I did the modification to the Belkin where I broke it carefully open and pulled the metal innards that are purely designed to give it a feeling of mass. All that is inside is a teeny circuit board that must have cost $1 tops! Belkin lists this at $50, although it is half that on Amazon.
All in all, a decent solution to a frustrating problem. Sound is pretty decent.
Hi folks, help needed and will be much appreciated!
My friend was a happy user of Xiaomi Redmi Note 3 SE until she mistakenly plugged speakers output to the phone audio jack (a stupid Chinese audio center she was using has 2 RCA connectors for input and 2 RCA connectors for output speakers, and all are located close to each other). It seems broke the chip controlling audio jack: as I understand, there should be a chip sensing and controlling what is plugged in, like phones only, or this or that type of ear phones with microphone. So now the phone built-in microphone is not working for any application, ear phones play one channel only, and the phone does not see the difference in between mere 3-contact jack and 4-contact jack for speakers and microphone. In other words, the phone cannot be used as phone anymore
If external bluetooth device is used, everything is OK, of course.
I have an idea to fix it if possible. Motherboard is out and I am trying to find a circuit logic controlling the audio jack. Can someone help with this please? Almost everything is covered by metal screens and I do not want to do extra false actions on the board.
So the questions are:
(1) What is the exact logic of Xiaomi RN3 SE work with audio jack?
(2) What circuit/chip is controlling audio jack and where is it located on the main board?
(3) What are repaire options in this case?
Hello again, folks...
4pda.ru came to be much more responsive in this case. I received two answers from there. The chip involved is WCD9326, for location on the motherboard see the image attached.
Same issue with My Frnd RN3, he plugged Aux cable and now he can't use phone call doesn't work, No Audio from speakers etc, when he gave it so service center they told Audio Ic Short and told to replace Motherboard
---------- Post added at 08:42 PM ---------- Previous post was at 08:29 PM ----------
Seems This IC
https://ru.aliexpress.com/item/WCD9326/32755025873.html?shortkey=I3iYzEZn&addresstype=600