Hello!
My phone isn't working with windows mobile although the windows phone 7 and the android works good with my hd2.
The error is this:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
How can i fix it?
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
samsamuel said:
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
Click to expand...
Click to collapse
It didn't worked... but thanks for helping
up
Sounds unusual...
try another original wm rom or a custom rom & recommended spl hspl for the rom & see if works ...
Have you tried task29 or flashing via usb with no SD card loaded ...
White screen
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
jagyugyaerik said:
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
Click to expand...
Click to collapse
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Mister B said:
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Click to expand...
Click to collapse
I dont know exactly, i guess it is unlocked. Thats why i dont know, where can i check it?
TMOUS US is easily identified by T-Mobile logo & green/red call/end keys ...
white screen
It has call keys, but its color are grey, but it dont have T-mobile logo
I had succesfully install a OS (Duttys_Leo_Sense_2.5_5.2.21907.5.0.93_1.80_ML_V4_Ship_PT) from SD card. But still happen the same, after i start the phone it has constant white screen.
Related
I have a problem:
I flashed my hd2 from a stocked rom 1.42 dutch version, with hspl 1.42. I installed a custom rom from: HTC HD2 Laurentius WWE 21891UltimatePOWER.
it worked fine for 2 or 3 days and then it stocked, i reseted the phone and
When i turn on my HD2, i get a white screen. and it doest go away. Even after softreset (volume button down in bootloader)
When i go in to bootloader i see this screen:
Pb81100 hx-bc
Spl-1.42.hspl xe
0x05
Cotullahspl 0x30
Click to expand...
Click to collapse
When i try to instal a rom by going in to bootloader en then start in win xp the update wont start, it stocked at 0 %
Then i tried to flash a orginal romt by sd:
it stocked at 7 % and i get this screen:
_______________________RUUNBH
PB81100___HX-BC
SPL-1.42.__hspl___XD
________________0x05
CotullaHSPL______0x30
Upgrade ROM code error
Please try again
Click to expand...
Click to collapse
- Then i tried to flash a radio rom by activesync, in xp it wont start,
- i tried flashing by sd and it stocked on 98%
- I tried different to install a rom and radio rom by vista, but also no succes
- I tried task 29 (by the Attached Task29 into a single exe.) to erease all data from the phone, but in windows by activesync it wont start
i tried al the above from windows 7.
Is there anyone that can help me, please i getting very desperate.
VERY VERY IMPORTANT! Try and read 2-3 times what is written here http://forum.xda-developers.com/showthread.php?t=609477
Only afterwards proceed to the following :
First of all....try and use Windows Vista or Windows 7.
Second of all....do not try to use task 29 because its a bit more complicated and it involves some drivers and so on!
Use this little thing here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 and after its completed....flash a proper radio something like 2.08.50.xx which you can find on Radio dedicated section here http://forum.xda-developers.com/showthread.php?t=611787
After all these....flash a custom ROM but be careful to be one suited with your radio! Which is a radio appliable for most of custom ROMS BUT be VERY careful!
Another thing.....do not flash from SD Card....Use the CustomRUU tool and flash it via ActiveSync!
Do you get any particular error message? When in bootloader mode, does "usb" show at the bttom of the screen? If so, try moving to a different usb port, preferably at the rear of the pc, or try different cable or even different pc. If still no luck, try uninstalling and then re-installing the latest version of Activesync.
The White Screen issue sounds like the incorrect radio version for the rom. I'm not familar with the details of the particular rom, but there are certain rom/radio combinations that will do that if they do not match eg running a 2.10 based rom with a x.xx.51.xx radio. The phone works intially until a reset and then hangs.
viperd said:
VERY VERY IMPORTANT! Try and read 2-3 times what is written here ......
Click to expand...
Click to collapse
Thanks for the replay
I tried, flashing by activesync. i flashed it the first time by hspl (the tread you link to) and then by activesync. But like i said, the hd2 stops at a white screen, so i tried by every possible way i could think of. Also i tried task 39 by the tool you mention, but it still does not work.
But i will correct my ts.
@clydeb1
I tryd to flash different radioroms, but if it try by activesync it wont start and by sd-flash it stocks at 98%, but i will try a different active sync
Okay,
I tried the following options:
- I installed a newest activesync and tried to instal an new rom under windows xp. The update stocked at 0% and i tried to install radio rom, with the same results
- I installed the windows mobile on windows 7, and tried the same as in windows xp, and still the same results.
Then i tried flashing every rom from the site by the sd-method (after every bad flash i formatted the sd-card with fat32)
With the sd method the phone stocked at 99% and then gives the next images:
00018003
LEOIMG.nbh - Fail
Radio_V2Fail
Update terminate
update fail
Click to expand...
Click to collapse
IS there any one how has a solution for this problem
Ok....try from the beginning!
1.Get from here http://forum.xda-developers.com/showthread.php?t=611433 HSPL2_RUN.zip (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....http://forum.xda-developers.com/show...3&postcount=19
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
viperd said:
Ok....try from the beginning!
1.Get from here (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
Click to expand...
Click to collapse
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Give the phone to someone who can get it to work??
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
korenbloem said:
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Click to expand...
Click to collapse
Thanks mate, if my suggestion doesn't work hopefully you can help him.
xmoo said:
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Click to expand...
Click to collapse
@Korenbloem,
A simple hardreset would have fixed your issue as well.
Instead of all kind of panic experiments like mtty/ flashing radios/roms from sd you could have come to me and I would have helped you.
You flashed a very old rom from the rom archive but never the less that rom is intensivily tested by me and the beta team.
I have no idea what kind of software you installed/tweaks you did or anything else but also with installing the wrong software it could cause the rom not to boot anymore.
Sorry to tell you but these 'bricking' stories are mostly caused by unexperiened users and it
making me sad to see more people are opening threads like this blaming a rom and causing a panic reaction in public destroying our work.
I realy hope you fix your device and I will try to help you but this isn't a rom issue.
Leo
Laurentius26 said:
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
Click to expand...
Click to collapse
Thanks for the adivse, but i already tried that with an orginal rom, but i will try it again, mabey there is a difference with a shipped rom.
The first thing i did was a hard reset, but that did't worked. (the phone is in this shape for 1 month now).
Second. I am not blaming you or anyone. I flashed the wrong radio rom i think (cant remember witch one) And that is my own fault. I never wanna make the suggestion that it is because of youre rom.
I took a risk by flashing my phone. and i is my responsibility.
Edit: I tried a shipping rom nld. But it gives the same error as always, only after 7%. But thanks for the advise
@ Xmoo, First of al thank you that you want to help with a sollution. But what does that mean a goldcard and what are the consequences of using it.
Laurentius26 helped me with fixing my device.
The problem was the radio. and by flashing a factory rom from t-mobile, the hspl was reset to spl 2.00. After that he flashed a orginal shipped rom (the orignal one from my device). And the rom is fixed again SPL 1.66 is now on the device.
Laurentius thanks for al the help!!!!!
HD2 bricked?
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
vanbasten88 said:
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
Click to expand...
Click to collapse
Do you have a branded Leo? If so, enter bootloader (remove battery, press volume down, insert battery), connect via usb (maybe you have to wait for driver installation), start the latest *.exe from your operator/carrier...
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
andreftx said:
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
Click to expand...
Click to collapse
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
silverwind said:
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
Click to expand...
Click to collapse
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
andreftx said:
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
Click to expand...
Click to collapse
The 1.66 ROM you posted above has radio version 2.06.51.07 with it. So have you considered trying to flash that radio version and then flash the ROM. I know if you get the ROM to flash it will flash that radio anyway. But you seem to think you flashed a wrong radio so just thinking out loud here.
Hello everyone,
i've been reading this forum for one month,
It was the day I decided to upgrade my HTC HD2, and someone disconnected the usb cable during the process.
Don't talk to me about that ;-)
The problem is I can't flash any rom radio into the phone.
OS ROMS work.
I read carefully a lot of posts here, I can say I have exactly the same problems as _Juster_ from this post :
forum.xda-developers.com/showthread.php?t=618084
My phone is a french HTC HD2, Orange branded.
I successfully installed HSPL 2.08
Making upgrades using USB is very difficult, it is very unstable (communication errors, no response from the phone....) .
I tried on windows 7 pro and win xp sp3 and it is the same.
I then created a goldcard, that I'm using to flash directly in the phone. It is stable, but when flashing a radio rom I always get the "ERROR 00018003, RSA FAIL error".
I learned from xda that the issue can be solved by flashing the original stock radio rom from Orange.
I downloaded a lot of shipped roms from Orange, or HTC.
Always RSA_FAIL.
I'm maybe doing something wrong, or this is a hardware problem....
a few questions for you folks :
1/ It seems that the original Orange stock rom is a 1.43
Must I have the 1.42 HSPL to flash it ?
Is the version of your HSPL important, when you want to flash a rom ? can I flash whatever rom with any HSPL ?
2/ using a Glodcard with HSPL already installed.
when you enter on the bootloader (vol down + power) you arrive on the HSPL tri color screen, displaying HSPL 2.08....
Are you sure the Goldcard is being used ?
How to be sure of that ?
I think (I may be wrong) when you enter the bootloader mode You are on HSPL mode.
What I do to enter the goldcard mode :
I just press power,
I have a "Software update failed message"
Then I arrive to the "Loading..." message
With the name of the ROM i'm trying to flash
LEOIMG.nbh
RADIO V2
Press power to start update
Am I right ?
Thanks for reading this and helping me.
is there other Tasks like task 29 you are aware of ?
Task 29 formats the phone ?
is there a way to partition the phone or to diagnose if there's a problem ?
what do we know about that RSA_FAIL ?
I assume the RSA proccessing is to check whether the RSA Key of the radio rom matches the phone's one ?
Is there a software way to bypass that RSA check ?
I've downloaded 22 radio roms (from orange and HTC) + several others (shipped & cooked)
I always get a RSA FAIL message when I try to flash.
any clue ? something ?
Can't really make out if you tried it from your post, but you could try to flash back to stock by using the SD flash method. Just put the leoimg.nbh in the root of the SD and boot while holding the vol down button. That way you go back to stock spl, rom and radio.
Check the sticky in the ROM development section which refers to the whole HSPL and how to flash everything topic. That should fill you in on HSPL.
Robinmasters said:
what do we know about that RSA_FAIL ?
I assume the RSA proccessing is to check whether the RSA Key of the radio rom matches the phone's one ?
Is there a software way to bypass that RSA check ?
I've downloaded 22 radio roms (from orange and HTC) + several others (shipped & cooked)
I always get a RSA FAIL message when I try to flash.
any clue ? something ?
Click to expand...
Click to collapse
take a look at this thread, it might help
http://forum.xda-developers.com/showthread.php?t=621930
Thanks for the answers.
R3dox said:
Can't really make out if you tried it from your post, but you could try to flash back to stock by using the SD flash method. Just put the leoimg.nbh in the root of the SD and boot while holding the vol down button. That way you go back to stock spl, rom and radio.
Check the sticky in the ROM development section which refers to the whole HSPL and how to flash everything topic. That should fill you in on HSPL.
Click to expand...
Click to collapse
I already flashed 22 radio roms and a dozen of full roms (os + radio) using SD CARD.
As the usb is very unstable I'm using the sd card method to flash, which is also a goldcard.
the problem is I ALWAYS get the RSA FAIL message (error 00018003) at the end of the radio flashing process.
This guy : forum.xda-developers.com/showthread.php?t=618084
had the same problem but with un unbranded phone and had it solved by flashing a cooked rom he randomly choosed.
To understand the situation,
my phone is an Orange branded one, what is the difference between a branded and an unbranded phone, assuming they both have the same HSPL ?
thx
Just sold my HD2.
Seems like some questions don't have answers....
what was the problem? íf i understand you right, it even worked..but you couldnt flash another radio...
why dont you use it further?
DN41
The phone wasn't able to boot
It was stuck at the white HTC logo,
After the failure of a radio flash, I was not able to flash it again. (RSA FAIL)
I read all the posts about this problem in xda, tried everything, nothing worked.
sorry...
so who bought it? how much did you get?
someone who needed a new lcd or so?
DN41
150€ , it was in a very good condition
RSA FAIL
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
i've same problem, anybody know how to solve this problem?
rudon100 said:
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
Click to expand...
Click to collapse
You don't just rename the whole update,you extract the ruu_signed.nbh file and rename that.
RSA FAIL
I had the same problem with my polaris (htc touch cruise - pola160). I managed to get rid of the problem by downgrading the radio rom.
I couldn't find my old one, but I was able to find the highest version older than my old one in the forum. So I first downgraded the radio using the sd card, after that the rom I was trying to install in the first place worked.
Thx to pcarvalho for this "fix" : http://forum.xda-developers.com/showpost.php?p=3645124&postcount=1 - the "Important Note:" section (always read the small print ).
Hope this helpes.
PS: Sorry if this is too late for some...
having this exact same problem, radio rsa fail, can't even flash a stock rom.
did anyone solve this?
rudon100 said:
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
Click to expand...
Click to collapse
Fz.hary said:
i've same problem, anybody know how to solve this problem?
Click to expand...
Click to collapse
jasonlee90210 said:
having this exact same problem, radio rsa fail, can't even flash a stock rom.
did anyone solve this?
Click to expand...
Click to collapse
Put the back of the phone in front of an AC in cold for 5 minutes, and keeping it always in front of the AC try to install.
If you are able to do that, send it back to the warranty.
Hello,
I have the same problem!
long time ago I had HTC devices, but few days ago I bought HD2 and it was installed android. Is unable to start or when they try to load a ROM eror occurs.
phone has only a white scrin.
error occurs mostly when upgrade Radio ver. I somehow managed NRGZ image but again not boot system.
Task 29 also comes to 19% and stops with the error.
I have a feeling that the real problem is the radio version. (00,018,003 Radio Fail)
I do not know what is the original ROM.
IMEI: 3526 6604 8712 295
SPL 2.08.HSPL
any help came good
Hi
I have a flashed HD2 with these problems.
In Bootloader it says
PB81100 SS-BC
SPL-208.HSPL 8G XE
0X05CotullaHSPL 0X50
If I try to install HTC RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe it breaks after 1% it says 270 error
HD2 reboots and again white Screen. When I put off/on battery and press Volume down I see bootloader display.
I tried to flash with sd Card, leoimg.nbh on the sdcard breakes after 10%
it says
00018003
LEOIMG.nbh -FAIL
Radio-Fail
I think I have a bootloader problem. How can I remove SPL-2.08.HSPL 8G XE and set the new orginal SPL ?
here bepe says :
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=611433
I made it with HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
but I can't remove HSPL from my bootloader.
How can I set my bootloader back to original htc ?
the topic can be closed
this has solved my problem
http://forum.xda-developers.com/showthread.php?p=24876999#post24876999
I had installd Windows 6.5 everthing was working perfect, then I tried to install Android and clk mod now I get the same in the 1. Posting from me.
I have SPL-3.03 HSPL in the boatloader but I get allways Error 270 I can't uninstall 3.03 HSPL
does anybody have an Idea?
Radio_2.15.50.14.nbh installation fails, but custom rom like energy sucesses. After that again white screen
nobody knows the solution?
You have a stuck radio. Fairly common, with a variety of symptoms. The radio wont let itself be changed which is why custom roms and splashscreens don't have a problem.(radio gets flashed at the start of flashing which is why it always fails around 8-10%) This issue can affect spl to a greater or lesser degree, some people can change spl some can't, some find flashing an older (but correct for that phones cid and region) stock rom, some find chilling the phone allows the flash to take allowing the radio to finally change, some never get anything to flash again.
hi
thank you for your answer. My Bootloader shows
SPL-3.03.HSPL XE
0X05
0X50
if I try to run Task29 via USB Cable, I get Error 270, it breaks sometimes at 16%
reflash 3.03 HSPL with HSPL 4 says it is successfull, but if I try to flash a rom with usb again it shows 270 Error, so my logical deduction is, reflash with HSPL4 does not really flash and it gives wrong answer because others like task28 leo customRUU can't flash over usb cable. HSPL 4 says success but this answer must be fake, after reboot 3.03HSPL remains in the bootloader, I tried to downgrade to 2.08HSPL no chance,
My System is Windows XP SP3 when I connect USB Cable to my HD2 it shows USB in the bootloader but why does it break if I try to flash over USB Cable and give an error 270 ? there must be a connection problem between my laptop and HD2.
I would like to know
Is there any way to flash HSPL4 over microSD card?
Can I see which Radio Rom has been installed ?
its a bit strange
Radio Rom Radio_2.15.50.14 istallation via USB Cable fails after 4%
and via microSD Card ~96-99%
I get
00018003
what can be the reason?
ParmakSokan said:
what can be the reason?
Click to expand...
Click to collapse
as i said,. you have a radio image that isnt allowing itself to be overwritten. My name for it is 'stuck radio' and some people fgind the radio still works fine with, for example, custom roms, it just cant be changed, others find the phone always hangs on grey bootscreen, yet more find taht hspol/spl flashes seem to work but nothing changes, some find chilling it in teh freezer lets a rom flash and suddenly all is well, and yet more find the freezer trick seems to work but doesnt, and yet more try and try and try to sd card flash with their CORRECT stock rom and suddenly without warning teh flash works.
My advcie, Prepare yourself for disappointment, but keep trying,and most importantly READING there are hundreds of threads about this.
mobile radio
ParmakSokan said:
nobody knows the solution?
Click to expand...
Click to collapse
hey gys whats this radio in mobiles... have searched and searched but no ans.....
Please Help ! I read lots of pages in forum, but can't find what I'm doing wrong. I want to get HSPL working to able to instal custom ROM to use Nokia apps, witch are way better than HTC and Marketplace apps.
Phone, HTC Radar 4G T-Mobile US
Windows Phone 7.8 (pushed on update with seveneight tool)
OS Version 7.10.8858.136
Firmware vers. 1600.2200.20402.531
Hardware revision: 0002
Radio vers. 16.23.05.13_16.30.00.23U
Radio hardware vers. 2.16.0.D4
Bootloader vers. 2.5.160015.3(137079)
Here is what I did, I flashed using Goldcardtool with Y-cable, OMEGIMG.nbh. I think flash did not finished properly, it went too fast, phone rebooted to SPL , plugged in to PC used DFT_HSPL_WP7SG1_INSTALL, install finished OK , but when I boot up to HSPL mode it does NOT connect to PC.
(Using ROMUpdateUtility getting connection error (260))
Here is how my screen looks in HSPL mode;
PI06110
HSPL2.5 1600.3(137079)
eMMC SMS 7376,FA31
CotullaH(F:80,ID:10,V20,B:AA)
Radio-16.23.05.13_2
F400
Please Help, what I'm doing wrong ? Why my HSPL have F400 error ?
Thank You so much !
Problem fixed. After HSPL install needed second time boot to USB Host mode and this time radio installed correctly. All good now, time for custom ROM
newappz said:
Problem fixed. After HSPL install needed second time boot to USB Host mode and this time radio installed correctly. All good now, time for custom ROM
Click to expand...
Click to collapse
Flash the radio also.
unable to flash 3.27 rom on my htc hd2 ........its a t mobile product but unlocked as i use it in india so i tried to flash asia version but it start and completes only 8% thn nothing happens and gives error [262]:which says
UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode
Its goes to the tri color screen where it says upgrade ROM code error Please try again.
Plz help
in download mode it says:
PB81110 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
your device is CID locked which stops none t-mobile roms flashing.
First thing you MUST DO is check what version HD2 you have:
if it has green & red, call/end keys it is the t-mobile USA version (TMOUS) & flashing the wrong radio on that model will result in a bricked device.
if you have standard model with white icons on keys then you will need install HSPL prior to flashing the ROM update, HSPL will bypass CID fixing 262 error ...
HSPL & ROM links for all models including ROM direct download links for TMOUS HD2 can be found in HD2 wiki.
Go look & read it all & be sure you know what you doing before proceeding to flash ...
can u tell me how to unlock cid and can this screen tell me about the rom whether it is 512 or 1024.....
I see you have HSPL already.
are you flashing from computer or trying sd card flash ?
I would also assume it is 512 EU version from details above
try the latest HTC Generic WWE ROM from Wiki section & perhaps try HSPL4 to reflash HSPL as maybe corrupted nand issue. Also do flash from PC via USB cable & make sure PC has activesync or WMDC installed (all can be found in HD2 Wiki)
i m flashing it from my pc as my phone doesnt start when i switch on it stuck on screen saying SOFTWARE UPDATE FAILED PLZ TRY AGAIN......
i tried to flash HSPL4 but it gave me error http://prntscr.com/1stcv1 ......
n also i have WMDC but i doesnt show up my phone but in tri color screen mode it shows usb....
yes it hav 512 rom
Sounds like corrupted nand & model id is perhaps corrupted too.
Try resetting via reset button.
Have a look at these thread:
http://forum.xda-developers.com/showthread.php?t=1001452
http://forum.xda-developers.com/showthread.php?t=1182215&page=2
thanx a lot......just performed task29 and got htc white screen and now can u tell me which rom to flash n can i make it converted to android:good::good::good::good:
First get it fully working on a WM6.5 ROM & test it for 2 or 3 days, then if good look at the Android nand section & look for a Android build you like & has good feedback & current support.
Post 4 above has a link to an HD2 HTC generic WM6.5 ROM but you can choose something else if needed by looking at the ROM links in the HD2 Wiki
xdriver said:
thanx a lot......just performed task29 and got htc white screen and now can u tell me which rom to flash n can i make it converted to android:good::good::good::good:
Click to expand...
Click to collapse
Hello xdriver,
if you want Android on yor phone you mighr opt for installing via NativeSD method, giving you the advantage of trying out different builds and choosing the one that suits your needs at best. Also, if somwthing goes wrong you always have WM fully functional on NAND. But consider buying a decent SD card first, meaning one with exceptional good random r/w access speed. You'll find tutorials in the SD section.
Have fun!
Best regards
Getrid…
Sent from my HTC HD2 using xda app-developers app
thnx 4 the info frnds but after doing task29 thn also it stuck at 8% and give same error stated in post #1 and now my phone doesnt start up when i switch it on it vibrates for 3-4 secs n nothing happen after i tried to flash wwe asia india ROM ............... maybe it is battery problem now i charging it to check the prob...........
its getting into the bootloader mode now i m download a lower version of ROM .......Hope it works