Hope someone can help me with this as it is a bit of a strange 1.
I recently replaced the digitizer screen on my X10i because the one that was on there was smashed up good.
Everything went together ok and it all switched on ok but for some reason only half of the screen will work(the bottom half). exactly half way through the screen/digitizer when it is vertical, it stops working. The top half does not work. The digitizer and everything else is in perfect condition so I am very confused as to what it could be.
I have replaced 100's of screen in the past and have never come across this problem.
Is it possible it could be a software issue? Does the software need to be re-calibrated to suit the screen? sounds a bit odd to me but ya never know.
Any help would be great.
thanks
Nobody can help me with this??
picklepete said:
I have replaced 100's of screen in the past and have never come across this problem.
Click to expand...
Click to collapse
Considering the above, last thing to try is to factory reset the phone. If that doesn't fix it, its a hardware issue.
Related
Hello I JUST realized my god damn hero's screen must be broken, or, the mobo is somewhat malfunctioning. I can't seem to be able to access the lower part of my screen.
Not only that, it often "decalibrates" and starts malfunctioning even worse :S I have to go back to the lock screen in order to get it back working for a few minutes.
I'm currently running CM7... Please advice thanks
Any chance it could be a bit of a ROM malfunction? Have you tried any others? That would be what I would try first. Hope it helps
Yes.. I have I tried the latest VillainROM, elelinux's rom and the one I'm currently running... any more suggestions? ...
Known issue with Hero's, Half of the screen dies after a year or so.
Mines half dead as well
I think the digitizer malfunctions.
Unfortunately, the only cure is a replacement of the digitizer or a replacement phone.
I found mine Hero having that behavior today.. screen not responding, jus a part of it, but when i turn the screen off and on again it goes to lock screen, and in lock screen works always, and after unlocking the screen it works for some instants.. :/
Can anyone tell me how much do you think it will cost to change the digitizer?
EDIT: After a cache wipe and dalvik cache wipe as well it's working perfectly
£30 I think. Do search for digitizer aand screen not responding in the Hero forums. There should be instructions and suppliers there.
Sent from my Blade using XDA App
Well I did it... Broke the screen a couple of weekends ago. Ordered and received a new one. (No problem and not too bad price-wise) Then I ordered the correct screwdriver. That came in yesterday and I followed a couple of tutorials online to take the thing apart. Not too bad despite the teeny-tiny parts. I got it back together and lo-it worked! Actually it took a couple of tries and I reflashed it but then it booted right up. All the apps seemed responsive and life was good once again...
Until I tried to make a call. Then the screen went dark and it appeared that the phone froze up. Called myself from the house phone and discovered that the Aria was dialing, connecting, and sending voice but that I couldn't hear anything on the Aria.
Disassembled, re-set the earpiece, reassembled, called myself again, and I could hear. The screen came on and stayed on, but the touchscreen would not function.
Disassembled, checked all the connections, and reassembled again. The phone appears to work correctly in all aspects until I try to make or receive calls. At that point the screen shuts down and the only way to disconnect a call (or get the screen back) is to pull the battery and reboot.
I tried reflashing the ROM and that didn't work. I'm afraid the transceiver is shorting the screen out somehow but have reached the limits of my expertise.
Any suggestions?
Thanks,
Jerry
I have never had to replace my digitizer so only speaking from what i have read but it sounds like the very small rubber piece that covers the proximity sensor. I have read that if missing or not placed correctly people have had the same problem as you. Just my thoughts
I've replaced my digitizer and I have had the exact same problem. E.Cardo is correct, it is the small rubber piece on the proximity sensor not positioned correctly or not present at all.
Thanks to both of you. The proximity sensor is supposed to be right behind the ATT logo, correct?
I can't wait to get home and try this. I really don't like the backup Cliq Xt... I'll post once I've messed with it.
gdgeorge said:
The proximity sensor is supposed to be right behind the ATT logo, correct?
Click to expand...
Click to collapse
It's hard to see them exactly so I took a picture to show exactly where they are:
http://imgur.com/a/36h8t#ayQhv
It's actually just above the & in the at&t logo, although if you have a replacement digitizer, it might not have the at&t logo on it. If you have trouble seeing it, try looking at it in the sunlight.
To add to what drumist said there as small black rubber piece that goes around the proximity sensor that prevents light seepage and allot of people discard it by mistake when disassembling the phone.
Sent From Deep Within The Rabbit-Hole
Why did you have to reflash? The new screen didn't worked?.
My aria's screen is broken too. I boutgh a new one but It doesn't work. Do you resolve this reflashing? (that's mean applying the new rom version from ATT)
Thanks for your response.
javierarenas said:
Why did you have to reflash? The new screen didn't worked?.
My aria's screen is broken too. I boutgh a new one but It doesn't work. Do you resolve this reflashing? (that's mean applying the new rom version from ATT)
Thanks for your response.
Click to expand...
Click to collapse
The screen or digitizer are hardware they should have nothing to do with the rom. The op only tried flashing the phone to illuminate it is a possible source of the problem. It sounds like you did not install the new screen or digitizer correctly you may need to disassemble and make sure everything is connected correctly and securely. Flashing your phone will most likely not correct your problem.
Sent From Deep Within The Rabbit-Hole
Maybe, just maybe, there are new drivers for the touchscreen included in the rom. I am using cyanogen 7.0.3 without problems, and it works nice with the old screen.
Or the new screen is defective.
I am pretty sure I installed correctly the new screen. Of course the old one is working fine right now.
I requested a new screen so I will wait...
Thanks again.
Hey could someone help me diagnose whats going on with my Galaxy Tab 10.1?
I haven't used it in a few days. I knew it was dead. So I went to charge it. It turned on
and the screen is showing crazy ****ed up lines and flickering. I cannot get to recovery or download mode.
My wife says its this "Carbon Rom" that I installed. I say bull****. If it was, I would be able to at least see recovery mode.
To me it seems the video card or screen, whatever produced the picture got screwed up. Please take a look at the pic and let me know what you think. Can this be fixed? Whats the cost? Is this something I can fix or do I need to go to a repair shop?
Is there a warranty on these things? Its a year old. If I send it to Samsung, will they be able to tell a custom rom was flashed which will void the warranty? Im guessing so... Someone please help im sad
The picture is attached.
Thanks for any help. Appreciated
deviouskind said:
Hey could someone help me diagnose whats going on with my Galaxy Tab 10.1?
I haven't used it in a few days. I knew it was dead. So I went to charge it. It turned on
and the screen is showing crazy ****ed up lines and flickering. I cannot get to recovery or download mode.
My wife says its this "Carbon Rom" that I installed. I say bull****. If it was, I would be able to at least see recovery mode.
To me it seems the video card or screen, whatever produced the picture got screwed up. Please take a look at the pic and let me know what you think. Can this be fixed? Whats the cost? Is this something I can fix or do I need to go to a repair shop?
Is there a warranty on these things? Its a year old. If I send it to Samsung, will they be able to tell a custom rom was flashed which will void the warranty? Im guessing so... Someone please help im sad
The picture is attached.
Thanks for any help. Appreciated
Click to expand...
Click to collapse
Its been sitting for 5 minutes now and I went to turn on and it shows a White screen now.
This seems like definite damage. The only things I could think it would be is last Saturday I was sitting by the pool reading
and I cover it back up with my flip case, had it sitting on the chair while I was swimming. It was fine after that though.
Last time I used it, it was Tuesday and it was fine. The only other thing is if my daughter got a hold of it... But there's no way to tell
either way if these were the cause. Any thoughts?
I remember someone posting a topic with the same issue like a yezr zgo or so, i can't find this topic anymore, the problem was with the screen or the cable of your screen, i think he had to replace his LCD screen
deviouskind said:
Its been sitting for 5 minutes now and I went to turn on and it shows a White screen now.
This seems like definite damage. The only things I could think it would be is last Saturday I was sitting by the pool reading
and I cover it back up with my flip case, had it sitting on the chair while I was swimming. It was fine after that though.
Last time I used it, it was Tuesday and it was fine. The only other thing is if my daughter got a hold of it... But there's no way to tell
either way if these were the cause. Any thoughts?
Click to expand...
Click to collapse
Seems in my opinion that you have a screen fault. Maybe it was caused by you without your knowledge or it is a manufacturing defect. It us really hard to say but a screen replacement should fix the problem.
Sent from my HTC One using Tapatalk 4 Beta
DefQoN_BE said:
I remember someone posting a topic with the same issue like a yezr zgo or so, i can't find this topic anymore, the problem was with the screen or the cable of your screen, i think he had to replace his LCD screen
Click to expand...
Click to collapse
Thank you for your reply.
So you think its the screen, same here. But im doing some you tubing and see that the screen is pretty much just a piece of clear cover that
goes over the lcd screen. I will need a new lcd screen, correct? Is it worth taking apart and checking the cables?
Theres no cracks or damage to the physical screen so it has to be internal.
If anyone can find a link, please let me know. Thanks for your help!
What do you think it would cost to fix at a repair shop? and / or samsung vs. joe blows repair shop?
WildfireDEV said:
Seems in my opinion that you have a screen fault. Maybe it was caused by you without your knowledge or it is a manufacturing defect. It us really hard to say but a screen replacement should fix the problem.
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Screen replacement or LCD replacement? The screen has no physical or visible cracks/damage.
Thanks for your reply!
deviouskind said:
Screen replacement or LCD replacement? The screen has no physical or visible cracks/damage.
Thanks for your reply!
Click to expand...
Click to collapse
Maybe it something from the inside so there will be no visible damage.
Sent from my HTC One using Tapatalk 4
Lcd replacement
I just got done replacing my broken screen on my LG G3. I replaced the whole front panel and just transfered the guts. Everything checked out fine after replacement until i typed my first text message. row A-L will not goto screen unless I touch nearly inbetween the middle of the row beneath it. q-p work fine as well as z-m. What really has me boggled is that the screen accepts touches there in virtually every other app/drawing. Just the keyboards aren't allowing touch in that specfic row. any suggestion?
Found a few more bad section.. Pulled the back loudspeaker back out and tried reseating the cables and still had same issue. They're sending a replacement for free.
This was my first screen replacement, but not my first time dealing with small ribbon cables. All cameras function fine, hoping it was a defect in screen and not my screen changing abilities.. Any tips for the next one would be appreciated. Would like to have a fully functioning phone again sometime. This is nearly more frustrating than the broken screen.
I am having same Issue
steber04 said:
Found a few more bad section.. Pulled the back loudspeaker back out and tried reseating the cables and still had same issue. They're sending a replacement for free.
This was my first screen replacement, but not my first time dealing with small ribbon cables. All cameras function fine, hoping it was a defect in screen and not my screen changing abilities.. Any tips for the next one would be appreciated. Would like to have a fully functioning phone again sometime. This is nearly more frustrating than the broken screen.
Click to expand...
Click to collapse
Hey just curious if your issue has been resolved.... I am having same issue, but i took mine to a computer store i have been dealing with for years. about a year ago they started doing cell phone repairs as well. I had them replace my cracked screen on my LG G3 and that same row of text if off for me and there are a few other spots i have noticed are off as well .... very frustrating... Anyway the place I took it to has replaced 3 screens hoping they were getting defective parts.... they just called to tell me I can come get it but they were unable to repair the dead spots without going further into replacing boards or something.... I dont know... It is weird though cause you can get the dead spots to work sometimes by very lightly touching or just touching it in just the right spots like a calibration if off....
thomas020476 said:
Hey just curious if your issue has been resolved.... I am having same issue, but i took mine to a computer store i have been dealing with for years. about a year ago they started doing cell phone repairs as well. I had them replace my cracked screen on my LG G3 and that same row of text if off for me and there are a few other spots i have noticed are off as well .... very frustrating... Anyway the place I took it to has replaced 3 screens hoping they were getting defective parts.... they just called to tell me I can come get it but they were unable to repair the dead spots without going further into replacing boards or something.... I dont know... It is weird though cause you can get the dead spots to work sometimes by very lightly touching or just touching it in just the right spots like a calibration if off....
Click to expand...
Click to collapse
A review on G3 LCD's on Amazon reports the same problem "I installed the screen and immediately my wife mentioned that it seemed to have "dead spots" when she was texting / playing games. I noticed it myself when I tried texting myself as a test. Several of the letters on the keyboard just wouldn't register very well. She went into the settings and ran the "motion sensor calibration" test under general settings>gestures. This has resolved the touch screen issues. "
I don't see how that would fix it but I guess it's worth a shot.
i'm using lenovo p780 that i bought on 1st december 2013. recently the phantom 'possessed' my phone. phantom touches occur and its really irritating. upgraded to kitkat last year.
baseband version
P780.V24, 2015/01/06 09:40
build number
P780_ROW_S228_150115
do i have to replace the digitizer only or with the screen?
or do i have to isolate the digitizer like i have read in one plus one forum?
PLEASE SOMEONE HELP ME..
thanks:crying:
proakkie said:
i'm using lenovo p780 that i bought on 1st december 2013. recently the phantom 'possessed' my phone. phantom touches occur and its really irritating. upgraded to kitkat last year.
baseband version
P780.V24, 2015/01/06 09:40
build number
P780_ROW_S228_150115
do i have to replace the digitizer only or with the screen?
or do i have to isolate the digitizer like i have read in one plus one forum?
PLEASE SOMEONE HELP ME..
thanks:crying:
Click to expand...
Click to collapse
Can you send us some pictures?
At this phone you can change only the digitizer or digitizer with lcd i reccomend this one. The digitizer for this phone is glued on lcd.
At my wife phone appeared some shadows on screen when she droped the device on watter.
I opened the phone(bye bye warranty, chinese waranty) and dried the phone. Shadows are gone now.
stympy said:
Can you send us some pictures?
At this phone you can change only the digitizer or digitizer with lcd i reccomend this one. The digitizer for this phone is glued on lcd.
At my wife phone appeared some shadows on screen when she droped the device on watter.
I opened the phone(bye bye warranty, chinese waranty) and dried the phone. Shadows are gone now.
Click to expand...
Click to collapse
i think they must be video(not picture) because the lcd is fine. flawless. the problem is about the touches. i dont touch it but it act like i touched it. do you understand the situation? i didnt do anything but it( the lcd) act like i touched it. i dropped the phone few times but nothing happen. until one day, the phantom touch suddenly occur. the touchscreen is quite ok for now. it acts normally since last night. before that i let the battery drained out and recharge until half of the capacity. so what do you think?
proakkie said:
i think they must be video(not picture) because the lcd is fine. flawless. the problem is about the touches. i dont touch it but it act like i touched it. do you understand the situation? i didnt do anything but it( the lcd) act like i touched it. i dropped the phone few times but nothing happen. until one day, the phantom touch suddenly occur. the touchscreen is quite ok for now. it acts normally since last night. before that i let the battery drained out and recharge until half of the capacity. so what do you think?
Click to expand...
Click to collapse
Indeed. You deed good. Try to do this few times, once or twice.
stympy said:
Indeed. You deed good. Try to do this few times, once or twice.
Click to expand...
Click to collapse
now its running smoothly again and I don't know what I've done specifically.:angel: