I was just wondering if any of you guys got the MHL adapter to work with the KP8 rom. It's not working for me and I'm not sure if it's my adapter, the HDMI cable, my TV, my phone or the ROM.
Have you had it working with any other rom? I'm on Cyanogenmod 7 and having the same problem.
I know my cables all work and my phone charges when its all plugged in. Just won't show on TV.
Sent from my GT-I9100 using Tapatalk
OK. Found the answer. It doesn't work on aosp roms, but fingers crossed it works on ics.
Sent from my GT-I9100 using Tapatalk
It does work on KP8, It was one of the things I tested.
steslatt said:
It does work on KP8, It was one of the things I tested.
Click to expand...
Click to collapse
Oh okay thank you for confirming that. Funny cuz it worked on the KL1 leak. I'm going to flash the new KPA leak and see if that works or not.
thatisfreakinggreat said:
OK. Found the answer. It doesn't work on aosp roms, but fingers crossed it works on ics.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Yeah, I think I read stock android is supporting TV-Out starting from ICS so maybe?
Related
GT-19100 Roms on our phones? is it possible?
I just braved it out and flashed a GT-19100 ICS rom on it and everything works - I ofcourse flashed a ATT radio but wifi, BT works so far.
Data/Voice mms/sms works.
so I'm guessing its possible?
Thanks,
You can Hellraise i9100 Roms, tons of info about it in the development threads. Not sure how much luck others have had hellraising ics though, it usually comes with problems.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
You CAN'T hellraise any ICS roms. Search a little bit and you'll find plenty of threads about it.
Like previous poster said Hellraising I9100(GB) is done very easily(look in dev section for hellraiser package).
Op: Are you saying voice(making/receiving calls) works? You sure? I'm pretty sure voice calls WILL NOT work.
eep2378 said:
You CAN'T hellraise any ICS roms. Search a little bit and you'll find plenty of threads about it.
Like previous poster said Hellraising I9100(GB) is done very easily(look in dev section for hellraiser package).
Op: Are you saying voice(making/receiving calls) works? You sure? I'm pretty sure voice calls WILL NOT work.
Click to expand...
Click to collapse
I called myself from work and heardmyself and called from my cell and it worked. I didnt hellraise anything, flashed a rom and directly after the rom i flashed an ATT modem
first boot took a little bit - the only problem i have is that the *back and search* captive buttons do not work.
Now might not be the best time to be brave. I9100 ics ROM won't work for I777 phones because we don't have the kernel source yet. try making a call and you'll know what I mean. Also getting back to stock might be a bi#@h now because most of the file sharing sites are down thanks to the FEDs.
getbuzzin said:
Now might not be the best time to be brave. I9100 ics ROM won't work for I777 phones because we don't have the kernel source yet. try making a call and you'll know what I mean. Also getting back to stock might be a bi#@h now because most of the file sharing sites are down thanks to the FEDs.
Click to expand...
Click to collapse
I simply flashed a .zip from their forums. I didnt do a firmware update or anything like
Exactly which zip did you flash?
While the button issues are most likely unsolvable without kernel source, working call audio is a MAJOR (and completely unexpected) development.
panamakid said:
GT-19100 Roms on our phones? is it possible?
I just braved it out and flashed a GT-19100 ICS rom on it and everything works - I ofcourse flashed a ATT radio but wifi, BT works so far.
Data/Voice mms/sms works.
so I'm guessing its possible?
Thanks,
Click to expand...
Click to collapse
I guess, this might be already helleraised!
Entropy512 said:
Exactly which zip did you flash?
While the button issues are most likely unsolvable without kernel source, working call audio is a MAJOR (and completely unexpected) development.
Click to expand...
Click to collapse
ressurection V7.4
Hmm will poke around at that... Although the ROM OP makes my eyes hurt.
panamakid said:
GT-19100 Roms on our phones? is it possible?
I just braved it out and flashed a GT-19100 ICS rom on it and everything works - I ofcourse flashed a ATT radio but wifi, BT works so far.
Data/Voice mms/sms works.
so I'm guessing its possible?
Thanks,
Click to expand...
Click to collapse
Which ATT Modem did you use? If Everything works using the I9100 Kernel (XXKP8) and just flashing the Modem makes it usable then you might have just discovered something here.
Hey bro which modem did you flash
Sent from my GT-I9100 using Tapatalk
Edit for everyone wondering what Zip the op flashed its here. Still awaiting which modem he used. http://forum.xda-developers.com/showthread.php?p=21216113
Sent from my GT-I9100 using Tapatalk
MysticKing32 said:
Edit for everyone wondering what Zip the op flashed its here. Still awaiting which modem he used. http://forum.xda-developers.com/showthread.php?p=21216113
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
It will be wise to let Entropy look into this before everyone starts loading this on their phone.....just saying
cfaberlle said:
It will be wise to let Entropy look into this before everyone starts loading this on their phone.....just saying
Click to expand...
Click to collapse
but then we would get to miss out on all those new threads that will pop up asking how to fix their broken phone!
Pirateghost said:
but then we would get to miss out on all those new threads that will pop up asking how to fix their broken phone!
Click to expand...
Click to collapse
Easy for you to say...
Pirateghost said:
but then we would get to miss out on all those new threads that will pop up asking how to fix their broken phone!
Click to expand...
Click to collapse
Exactly!
---------- Post added at 04:55 PM ---------- Previous post was at 04:52 PM ----------
panamakid said:
I called myself from work and heardmyself and called from my cell and it worked. I didnt hellraise anything, flashed a rom and directly after the rom i flashed an ATT modem
first boot took a little bit - the only problem i have is that the *back and search* captive buttons do not work.
Click to expand...
Click to collapse
If this is true then major progress has been made(jury still out).
Does your home button take you "back"?
So I gave it a shot with the KK6 modem and it doesn't not work. No dice
Sent from my SAMSUNG-SGH-I777 using xda premium
Same as above, tried it with kk6 and kh7 and nadda. Still had the same prob as all the other i9100 ics based roms.
yoderk said:
So I gave it a shot with the KK6 modem and it doesn't not work. No dice
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Nyk0n. said:
Same as above tried it with kk6 and kh7 and nadda. Still had the same prob as all the other i9100 ics based roms.
Click to expand...
Click to collapse
You don't say.......OP?
I777UCLD3 is an update to the last release. There is no changelog, so don't ask for one, call samsung about it. lol
http://rootzwiki.com/topic/23108-i777ucld3/
Everyone give a big thanks to THE UNKNOWN SOURCE for leaking these files to me for you!
Thanks DG!!
Sent from my SGH-I777 using xda premium
Thanks for all the leaks.
Sent from my SGH-I777 using Tapatalk
Very appreciated man!
Sent from my SGH-I777 using XDA
Thank you!! Keep em coming.
designgears said:
I777UCLD3 is an update to the last release. There is no changelog, so don't ask for one, call samsung about it. lol
http://rootzwiki.com/topic/23108-i777ucld3/
Everyone give a big thanks to THE UNKNOWN SOURCE for leaking these files to me for you!
Click to expand...
Click to collapse
Can u please post a link for cognition i cant find it
Sent from my SGH-I777 using XDA
is that NFC i see?
Pirateghost said:
is that NFC i see?
Click to expand...
Click to collapse
Oh wait, we already have it xD
Tempted to try this...
yahoowizard said:
Oh wait, we already have it xD
Click to expand...
Click to collapse
lol, i know.
Pirateghost said:
lol, i know.
Click to expand...
Click to collapse
Well perhaps this is the non-gingerbread ported NFC. Not that it makes a difference.
i know we got a working nfc enabler already. but has somebody been able to actually use it?? I just want to know for some feed back... back to topic could this mean we are nearing a final ota release?? not that I Care much i dont see me going back to stock rom unless its really stable. Im enjoying my freedom on cm9 even in the nightly stages. and i dont think I can go back to Stock TW after ive experienced apex launcher
Thanks DG!
aj9507 said:
i know we got a working nfc enabler already. but has somebody been able to actually use it?? I just want to know for some feed back... back to topic could this mean we are nearing a final ota release?? not that I Care much i dont see me going back to stock rom unless its really stable. Im enjoying my freedom on cm9 even in the nightly stages. and i dont think I can go back to Stock TW after ive experienced apex launcher
Click to expand...
Click to collapse
As far as the thread, people have been able to get NFC tags working as well as Android Beam. So, I'd say most of the things are working except Google Wallet, which on one part, is the most important use for NFC for a lot of us, but that's AT&T's fault, so...
Thank you DG.. it is appreciated
Sent from my SGH-I777 using Tapatalk 2
Thanks DG, looking forward for a cwm flashable modem zip or even the modem.bin (I have no clue on how to extract it from the one click...)
drakester09 said:
Thanks DG, looking forward for a cwm flashable modem zip or even the modem.bin (I have no clue on how to extract it from the one click...)
Click to expand...
Click to collapse
http://d-h.st/ZiK
Thanks for the leak!
Thanks!
Sent from my SGH-I777 using Tapatalk 2
Thanks again for your contribution to the community.
Sent from my SAMSUNG-SGH-I777 using XDA
biontc said:
Well perhaps this is the non-gingerbread ported NFC. Not that it makes a difference.
Click to expand...
Click to collapse
This leak comes with NFC natively without any ports or mods
Hi, i was thinking of getting an OTG cable from market, but then i thought i can get a case rather than cable...
Now i want to know that if i can connect drives in aokp rom, I'll get a cable else cover
Any reply would be appreciated..
Thanks for reading
Sent from my GT-I9100 using XDA
nexus2515 said:
Hi, i was thinking of getting an OTG cable from market, but then i thought i can get a case rather than cable...
Now i want to know that if i can connect drives in aokp rom, I'll get a cable else cover
Any reply would be appreciated..
Thanks for reading
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
yes otg cable work in aokp
and its the kernel which supports otg feature
and not the rom
am on aokp and its work like a charm
I'm on CM kernel right now...
How do i know if kernel supports OTG or not
Sent from my GT-I9100 using XDA
nexus2515 said:
I'm on CM kernel right now...
How do i know if kernel supports OTG or not
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
read the kernel specification
and i don think cm kernel supports otg
try siyah fluxxi etc
they support otg
I modded a package to replace the stock camera and Gallery with the 4.2 versions. This will eliminate the Gallery and camera duplication. None of this is original work. To use photosphere with this package you still need to modify your build.prop.
http://db.tt/DSPgGwF9
Sent from my Apple IIe
The other thread in this section regarding 4.2 camera doesn't require you to modify build prop to use photosphere. Just FYI to all cruising this thread.
Sent from my SGH-I777
Last time I looked, those links had been taken down. Are they back up?
Sent from my Apple IIe
billyjed said:
Last time I looked, those links had been taken down. Are they back up?
Sent from my Apple IIe
Click to expand...
Click to collapse
I just checked and the thread is accessible from post #11, everything works including photoscape. I tested it on CM10 myself and it worked perfectly, all you have to do is flash the zip in CWM.
How come photoscope dont work for me im on thunderbolt v5 please help
desichiko23 said:
How come photoscope dont work for me im on thunderbolt v5 please help
Click to expand...
Click to collapse
More info needed. Is it available for you to use? Does it crash?
Sent from my SGH-I777 using xda premium
Arava said:
More info needed. Is it available for you to use? Does it crash?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Im sorry, everything works great but when i click on photoscope it say not supported on device i777
desichiko23 said:
Im sorry, everything works great but when i click on photoscope it say not supported on device i777
Click to expand...
Click to collapse
That's right. I don't think photo scope is supported by our device. Totally different app. Photosphere is what comes with this apk.
Sent from my SGH-I777 using xda premium
desichiko23 said:
Im sorry, everything works great but when i click on photoscope it say not supported on device i777
Click to expand...
Click to collapse
Edit your build.prop
Sent from my Apple IIe
billyjed said:
Edit your build.prop
Sent from my Apple IIe
Click to expand...
Click to collapse
THANKS!! but----how i build.prop..........sorry im a noob, but not really a noob
desichiko23 said:
THANKS!! but----how i build.prop..........sorry im a noob, but not really a noob[/QUOTE
This is kind of moot, there is a package out there that has the whole 4.2 gapps package, search for it and flash it and you will be good.
Sent from my Apple IIe
Click to expand...
Click to collapse
I'm using photosphere just fine on my i777. I used it on my living room just yesterday. Look for the big 100mb+ 4.2 gapps package in the Nexus forums. Everything works great so far.
Sent from my SGH-I777 using Tapatalk 2
Slavestate said:
I'm using photosphere just fine on my i777. I used it on my living room just yesterday. Look for the big 100mb+ 4.2 gapps package in the Nexus forums. Everything works great so far.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Are you able to take video with the 4.2 camera? I'm on Task's aokp 11/7/2012 build with Siyah 4.3.3 kernel, and this is the only feature not working.
I've installed multiple versions of the 4.2 camera, can't get video. Photosphere works fine.
Eclectic Taste said:
Are you able to take video with the 4.2 camera? I'm on Task's aokp 11/7/2012 build with Siyah 4.3.3 kernel, and this is the only feature not working.
I've installed multiple versions of the 4.2 camera, can't get video. Photosphere works fine.
Click to expand...
Click to collapse
Sort of. I just tried it like 10 mins ago he he. I can't get it to record in either 720 or 1080p. The record button just doesn't do anything. 480p works though.
Sent from my SGH-I777 using Tapatalk 2
Eclectic Taste said:
Are you able to take video with the 4.2 camera? I'm on Task's aokp 11/7/2012 build with Siyah 4.3.3 kernel, and this is the only feature not working.
I've installed multiple versions of the 4.2 camera, can't get video. Photosphere works fine.
Click to expand...
Click to collapse
Video with the rear camera is one of the things still not working with the 4.2 camera.
Slavestate said:
Sort of. I just tried it like 10 mins ago he he. I can't get it to record in either 720 or 1080p. The record button just doesn't do anything. 480p works though.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Have you tried watching the video? Mine was garbled.
Sent from my Apple IIe
billyjed said:
Have you tried watching the video? Mine was garbled.
Sent from my Apple IIe
Click to expand...
Click to collapse
Actually I forgot til just now. Yeah the video is completely black and can't even be played..
Sent from my SGH-I777 using Tapatalk 2
So I've been on CM10 for a few days and I noticed that when I plug my phone in to watch a YouTube video...the playback on the TV is choppy. Maybe around 15-20 fps...which is weird since the Touchwiz Roms don't have this problem.
Any help?
Sent from my Galaxy S4 using xda premium
VeryCoolAlan said:
So I've been on CM10 for a few days and I noticed that when I plug my phone in to watch a YouTube video...the playback on the TV is choppy. Maybe around 15-20 fps...which is weird since the Touchwiz Roms don't have this problem.
Any help?
Sent from my Galaxy S4 using xda premium
Click to expand...
Click to collapse
I didn't think tv out worked at all on it.
Could you please share the Rom you are using.
Thanks.
Ashley1987 said:
I didn't think tv out worked at all on it.
Could you please share the Rom you are using.
Thanks.
Click to expand...
Click to collapse
CM10.1 Skankyyy Version.
It also has worked on AOKP, ParanoidAndroid and regular CM10
Sent from my SGH-I747M using xda premium
As far as I know cyanogenmod doesn't support TV out. Anyway read the CM faq and correct me if I'm wrong.
Sent from my GT-I9300 using xda premium
It doesn't. God knows how he's supposedlygot it working
Maybe it doesn't work on international Models ?
I have an ATT GS3 and it works when you plug it in via MHL.
I was posting the question here because I was windering if any other models had the issue
Sent from my SAMSUNG-SGH-I747 using xda premium