I have seen this posted several times while looking through other threads. It seems to be working for a lot phones with locked boot loader.
Will it work on the Rezound?
http://forum.xda-developers.com/showthread.php?t=1423151
HTC Unlock - User Guides for Flash Image GUI!!
HTC Unlock - Users Guide for ROMs with a Kernel (boot.img file):
1) Unlock using HTC method
2) Load this application, Flash Image GUI, onto the device, either through the Market or the link provided in this OP.
3) Download ROM .zip file to the sdcard on the device.
4) Open up Flash Image GUI, select Browse and select the ROM .zip file, downloaded to /sdcard in the previous step.
5) Flash Image GUI will provide a warning, reminding that the ROM .zip file will *need* to be flashed in the custom recovery afterward.
6) Flash Image GUI will index the full ROM .zip file searching for the kernel and kernel modules. Once located, the Flash Image button should be enabled.
7) Select the Flash Image button and Flash Image GUI will load the kernel and kernel modules from inside the ROM zip file.
8) Once completed, turn off the device. (Assuming you've already loaded a custom recovery)
9) Hold volume down + power to boot into the bootloader. Select recovery.
9) Inside the custom recovery, load/flash the ROM zip file.
10) Reboot to normal Android mode and all should work including Wifi!
I don't know. I don't think anyone would know without trying. It was meant for a completely different phone, and we don't even have an official CWM yet. So I'd really say "Results may vary".
dmoses1969 said:
I have seen this posted several times while looking through other threads. It seems to be working for a lot phones with locked boot loader.
Will it work on the Rezound?
http://forum.xda-developers.com/showthread.php?t=1423151
HTC Unlock - User Guides for Flash Image GUI!!
HTC Unlock - Users Guide for ROMs with a Kernel (boot.img file):
1) Unlock using HTC method
2) Load this application, Flash Image GUI, onto the device, either through the Market or the link provided in this OP.
3) Download ROM .zip file to the sdcard on the device.
4) Open up Flash Image GUI, select Browse and select the ROM .zip file, downloaded to /sdcard in the previous step.
5) Flash Image GUI will provide a warning, reminding that the ROM .zip file will *need* to be flashed in the custom recovery afterward.
6) Flash Image GUI will index the full ROM .zip file searching for the kernel and kernel modules. Once located, the Flash Image button should be enabled.
7) Select the Flash Image button and Flash Image GUI will load the kernel and kernel modules from inside the ROM zip file.
8) Once completed, turn off the device. (Assuming you've already loaded a custom recovery)
9) Hold volume down + power to boot into the bootloader. Select recovery.
9) Inside the custom recovery, load/flash the ROM zip file.
10) Reboot to normal Android mode and all should work including Wifi!
Click to expand...
Click to collapse
Definitely possible .. if I could get a tester or two, we could find out!
I was able to add support for the HTC Amaze 4G and the HTC Holiday/Vivid this last two weeks, both with HTC's Unlock method.
MrSmith317 said:
I don't know. I don't think anyone would know without trying. It was meant for a completely different phone, and we don't even have an official CWM yet. So I'd really say "Results may vary".
Click to expand...
Click to collapse
Yes, custom recovery is absolutely required as it is the only for sure, time tested reliable backup/restore method. If anything goes wrong, or a user flashes the wrong ROM/kernel combination, custom recovery is required to restore.
Hope this has been resolved!
Related
Hello, i am a newbie and i want to flash a ROM for my EVO 3D, i have hboot 1.50 with S-ON unlocked Bootloaders and Rooted. So, i will flash a ROM for my firmware and confirmed it works and no need to flash Kernel, but when i go to FLASH GUI app it only shows Kernel Image and Recovery Image... I want to flash a Full ROM, which of the options do i need to choose? Thanks.
You cannot flash roms through that. You need a recovery such as twrp
Sent from my PG86100 using xda premium
patrao_n said:
You cannot flash roms through that. You need a recovery such as twrp
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I have recovery.img in root of my sdcard which i used for install su-2.3.6.3.zip for root and unlock bootloaders with htcdev.com
luis4ever said:
Hello, i am a newbie and i want to flash a ROM for my EVO 3D, i have hboot 1.50 with S-ON unlocked Bootloaders and Rooted. So, i will flash a ROM for my firmware and confirmed it works and no need to flash Kernel, but when i go to FLASH GUI app it only shows Kernel Image and Recovery Image... I want to flash a Full ROM, which of the options do i need to choose? Thanks.
Click to expand...
Click to collapse
Taken from the guide I posted in my OP of the Flash Image GUI EVO 3D thread:
HTC Unlock - Hboot 1.5 Users Guide for ROMs with a Kernel (boot.img file):
1) Unlock using HTC method for Hboot 1.5 users
2) Load this application, Flash Image GUI, onto the device, either through the Market or the link provided in this OP.
3) Download ROM .zip file to the sdcard on the device.
4) Open up Flash Image GUI, select Browse and select the ROM .zip file, downloaded to /sdcard in the previous step.
5) Flash Image GUI will provide a warning, reminding that the ROM .zip file will *need* to be flashed in the custom recovery afterward.
6) Flash Image GUI will index the full ROM .zip file searching for the kernel and kernel modules. Once located, the Flash Image button should be enabled.
7) Select the Flash Image button and Flash Image GUI will load the kernel modules and kernel from inside the ROM zip file.
8) Select reboot recovery.
9) Inside the custom recovery, load/flash the ROM zip file.
10) Reboot to normal Android mode and all should work including Wifi!
Click to expand...
Click to collapse
Edit: 2nd question posted same time I replied to 1st question
luis4ever said:
I have recovery.img in root of my sdcard which i used for install su-2.3.6.3.zip for root and unlock bootloaders with htcdev.com
Click to expand...
Click to collapse
If you boot into the recovery, use the same method as used for the su-2.3.6.3.zip for the ROM .zip file and it will load.
The confusion occurs if the ROM contains a kernel. If so, Flash Image GUI can be used with the guide I posted above.
Alternative methods involve using fastboot to load the recovery, such as: fastboot boot c:\recovery.img
If that doesn't answer your question, feel free to post back! Thanks for the support!
This is what happens:
1.- Go to open flash GUI and starts.
2.- now kernel is preselected and chache and dalvik too.
3.- i press browse button select meanromv2.17.651.5.zip
4.- it says is a too large file for recovery or kernel image.
5.- it asks if it is a valid ROM zip file and it can locate kernel modules etc.
6.- i press yes and it says extracting zip file: meanrom.zip locating for kernel modules, peleas be patient, etc.
7.- extracted zip file in Application data.
8.- kernel continues preselected and cache too.
9.- what is the next? Press flash? And then? Reboot lnto recovery and navigate to zip file and press power button to install? Wipe data?
PD: As far as i know the kernel from the Stock and this ROM is the same. Thanks.
luis4ever said:
This is what happens:
1.- Go to open flash GUI and starts.
2.- now kernel is preselected and chache and dalvik too.
3.- i press browse button select meanromv2.17.651.5.zip
4.- it says is a too large file for recovery or kernel image.
5.- it asks if it is a valid ROM zip file and it can locate kernel modules etc.
6.- i press yes and it says extracting zip file: meanrom.zip locating for kernel modules, peleas be patient, etc.
7.- extracted zip file in Application data.
8.- kernel continues preselected and cache too.
9.- what is the next? Press flash? And then? Reboot lnto recovery and navigate to zip file and press power button to install? Wipe data?
PD: As far as i know the kernel from the Stock and this ROM is the same. Thanks.
Click to expand...
Click to collapse
Steps 7 and 8 are where more detail is needed.
Although, all this confusion might be avoided by answering one question: Does this ROM contain a kernel? If not, you can skip using Flash Image GUI and directly load the ROM from the custom recovery, since you mentioned it is compatible with stock kernel you're currently using.
If this ROM does contain a kernel then answer to all questions in number 9 should be Yes. You'll know more about the kernel included in the ROM as Flash Image GUI adds three lines of text above the Flash button detailing where the kernel was located inside the ROM .zip file and what type of kernel setup the ROM is using.
Hope that helps!
joeykrim said:
Steps 7 and 8 are were more detail is needed.
Although, all this confusion might be avoided by answering one question: Does this ROM contain a kernel? If not, you can skip using Flash Image GUI and directly load the ROM from the custom recovery, since you mentioned it is compatible with stock kernel you're currently using.
If this ROM does contain a kernel then answer to all questions in number 9 should be Yes. You'll know more about the kernel included in the ROM as Flash Image GUI adds three lines of text above the Flash button detailing where the kernel was located inside the ROM .zip file and what type of kernel setup the ROM is using.
Hope that helps!
Click to expand...
Click to collapse
If this guy tries and gives you advice about flash gui don't listen to him...He doesn't know what he's talking about.
gilbydakid said:
If this guy tries and gives you advice about flash gui don't listen to him...He doesn't know what he's talking about.
Click to expand...
Click to collapse
WTF dude? R u serious? Hope not. Joeykrim knows what he's talking about. Period.
Now, for the OP, I have a guide/flashing notes in my signature that should help clear up your Hboot 1.50 flashing issues. Also have detailed flashing "scenarios" that include using Jk's FlashImage app.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
WTF dude? R u serious? Hope not. Joeykrim knows what he's talking about. Period.
Now, for the OP, I have a guide/flashing notes in my signature that should help clear up your Hboot 1.50 flashing issues. Also have detailed flashing "scenarios" that include using Jk's FlashImage app.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Thanks, i falshed the ROM with no problems.
Deleted, starting to sound like a xda prick.
Yes it was a joke.
S3nt from my 3D wond3rland
I been searching around all over the place and I am just hitting my head against the wall. Any help would be appreciated.
This is my setup: hboot 1.5 S-ON, I have unlocked using the HTC method. I have Revolutionary CWM recovery installed.
I am looking to update the Kernel and Radio/PRI of the phone to the latest versions. (I haven't done it in a very long time.)
By what I read, since I have hboot 1.5 updating the kernel seems close to impossible. I did read that I may have to go to a Stock Rom and update via sprint OTA to get the latest updates then unlock again? That doesnt sound right to me.
I am all types of confused. Part of this was started because I wanted to try the MeanROM (link:http://forum.xda-developers.com/showthread.php?t=1466362) and also update my phone. Everything I try to do fails or I cant do because of the 1.5 or the S-ON.
Hopefully i am making some sense. I dont know what I have to do to get the latest kernel or if it even is possible.
If you are rooted already the only thing you need to do is install flash GUI app (you can get it in the market) and flash the kernel (boot.img) file before you flash the ROM and you should be OK
There is a myth that if your on 1.5 s-on your doomed, that's not true. It does mean that you'll need an extra step to do things but you'll be able to get things done without issues.
Sent from my Xoom using Tapatalk
megabiteg said:
If you are rooted already the only thing you need to do is install flash GUI app (you can get it in the market) and flash the kernel (boot.img) file before you flash the ROM and you should be OK
There is a myth that if your on 1.5 s-on your doomed, that's not true. It does mean that you'll need an extra step to do things but you'll be able to get things done without issues.
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
Thank you for the reply, so I understand I can load that application, unzip the rom I want which will have the boot.img. Then flash that boot.img and then install that rom, is that correct? Lastly, does this also update the radio and pri?
spiderz13 said:
Thank you for the reply, so I understand I can load that application, unzip the rom I want which will have the boot.img. Then flash that boot.img and then install that rom, is that correct? Lastly, does this also update the radio and pri?
Click to expand...
Click to collapse
If your firmware is compatible with the Rom and kernel yes. If not, you will brick your phone or features will not work as they have to do. After you install flash GUI go to browse button and you will be advertised that file is too large for a kernel or recovery image, then asks if it is a valid Rom zip file. Tap yes and it will search the kernel inside the Rom. After it finishes tap flash and after reboot in recovery(you have to have recovery.img in root of your SD card), next wipe dalvik and cache, install zip and wait until the phone finishes. It is also recommended to you to make a nandroid backup before install anything.
spiderz13 said:
Thank you for the reply, so I understand I can load that application, unzip the rom I want which will have the boot.img. Then flash that boot.img and then install that rom, is that correct? Lastly, does this also update the radio and pri?
Click to expand...
Click to collapse
For the EVO 3D, much like the EVO 4G, the custom ROMs generally do not contain the radio or pri images.
There are some different reasons for this, but one of the common reasons being some users claim to experience different radio performance based on their geographic loation in relation to different versions of the radio and pri images.
luis4ever said:
If your firmware is compatible with the Rom and kernel yes. If not, you will brick your phone or features will not work as they have to do. After you install flash GUI go to browse button and you will be advertised that file is too large for a kernel or recovery image, then asks if it is a valid Rom zip file. Tap yes and it will search the kernel inside the Rom. After it finishes tap flash and after reboot in recovery(you have to have recovery.img in root of your SD card), next wipe dalvik and cache, install zip and wait until the phone finishes. It is also recommended to you to make a nandroid backup before install anything.
Click to expand...
Click to collapse
The only clarification to this post would be having recovery.img in the root of your SD card is not required for rebooting into recovery mode. In order for a custom recovery to load, when rebooting into recovery mode, the recovery.img has to have been flashed previously. Flash Image GUI can also flash the recovery.img to the recovery partition so when you reboot into recovery, the proper custom recovery loads. Most users flash custom recoveries infrequently when compared to how often they flash ROMs so the process for flashing the recovery process isn't covered as often.
In general, regarding the OP's original question of flashing the "MeanROM", the Flash Image GUI thread provides a great beginner step by step guide I wrote to help walk thru the general overview and process. I've quoted it below for easy reference.
Appreciate all the support of Flash Image GUI! I'll echo the optimism for hboot 1.5 s-on unlocked users, most everything is still possible. HTC just requires an extra few steps which can be frustrating, but once they are learned, the process is fairly smooth.
Hope the clarification helps iron out any confusion on the details!
HTC Unlock - Hboot 1.5 Users Guide for ROMs with a Kernel (boot.img file):
1) Unlock using HTC method for Hboot 1.5 users
2) Load this application, Flash Image GUI, onto the device, either through the Market or the link provided in this OP.
3) Download ROM .zip file to the sdcard on the device.
4) Open up Flash Image GUI, select Browse and select the ROM .zip file, downloaded to /sdcard in the previous step.
5) Flash Image GUI will provide a warning, reminding that the ROM .zip file will *need* to be flashed in the custom recovery afterward.
6) Flash Image GUI will index the full ROM .zip file searching for the kernel and kernel modules. Once located, the Flash Image button should be enabled.
7) Select the Flash Image button and Flash Image GUI will load the kernel modules and kernel from inside the ROM zip file.
8) Select reboot recovery.
9) Inside the custom recovery, load/flash the ROM zip file.
10) Reboot to normal Android mode and all should work including Wifi!
Click to expand...
Click to collapse
Hi, I have a HTC & Asus transformer TF101 and was blissfully unaware that other android devices have convoluted and complicated root / flash procedures, till I was handed my wife's ST15i to root.
I managed to unlock the bootloader and downgrade from ICS stock to gb .42 firmware and rooted using doomlord's zergrush. Then loaded CWMRto the phone (now on .42 gb rooted stock).
I am stuck from here as anything else I flash (custom Rom, upgrade to ICS) gets me to a soft boot (stuck at SE boot logo) or lose root and CWMR on ICS ROM. The help guides, tutorials etc on this forum or elsewhere do not even tell the keypress or tool to use for fastboot, CWMR or how to enter boitloader / recovery. I am no noob on android, adb and rooting, but working with this phone has brought me to tears!
Is the boot IMG and kernel necessarily flashed separately from the ROM on Xperia phones?
My aim is to get to a rooted ICS, non miui ROM for my wife. Please help and /or guide me to achieve this. At this rate, I feel like giving away my HTC to the wife and exchange the Xperia for a more user friendly phone.....
Sent from my HTC Incredible S
Okay, so:
The kernel is seperated from the rom. If you have unlocked the bootloader you can flash a kernel. In most kernels, cwm is included, so you flash the kernel and then you can boot up. While booting you press the volume down button again and again, to come to cwm. There you can install a zip file, in which the rom is.
Are you really sure the bootloader is unlocked? Did you do it by testpoint or sonys official method?
To flash a kernel, you need the boot.img. Before you start flashing the kernel, put the downloaded zip file of the rom on your sd card.
Then, and I would do it like this cause with the normal command line by windows it's the same, you open sony flash tool. There you click on the flash, select fastboot mode and on the right side there is select kernel to flash. There you choose the boot.img. Then you have to shut down your phone, and while you are holding volume up key, you connect phone to pc. There will light up the blue led and flash tool will automaticly flash the kernel. READ THE LOG BEFORE YOU PLUG OFF DEVICE!! If the log is ok (there are no errors), you can plug off device and turn it on. While booting, you press volume down again and again. Then you have to follow the tutorial to the rom (what has to be formatted or wiped and how to install the rom itself. Cause after flashing the kernel, you must install the rom or your device won't boot up!
Okay, now we could do an example:
If you want an ics rom, I would take cyanogenmod 9. Here's a guide:
Download the zip file from here.
Then you extract the zip file, so you have one packed zip file and one unpacked. The packed zip file you copy to your sd card.
In the unpacked, there's a boot.img. If it isn't named boot.img rename it, so it's name is "boot", but windows detects as an image file.
You open sony flash tool and click on the flash, select fastboot mode and then choose "select kernel to flash". Choose the boot.img (make sure it is named boot and it is an image. In flashtool the image you choose should be named boot) and shut down phone. Hold volume up key that the blue led shines, and the kernel is flashed after seconds. Now see the log, if there's no error, plug off the device and power on. While powering on you press the volume down button again and again.
Now you are in cwm. There I would do a backup first. When the backup has finished, you make a factory reset and wipe cache partition.
Then select install zip from sd card and choose zip. There you choose the cm9 zip you copied to your sd card. If it finished installing (don't power off device while installing, sometimes you could think it stuck, but normally it won't. Just wait and drink a coffee!) you can reboot device and normally it should work.
YOU DO THAT ON YOUR OWN RISK. FOR ME ON MINI PRO IT WORKED, BUT I CAN'T PROMISE!
Hope it works and keep up! In the end you will hopefully enjoy your rom (maybe cm9)
Greets
Michael
---------- Post added at 12:31 PM ---------- Previous post was at 11:34 AM ----------
Michi_optimus_me said:
Okay, so:
The kernel is seperated from the rom. If you have unlocked the bootloader you can flash a kernel. In most kernels, cwm is included, so you flash the kernel and then you can boot up. While booting you press the volume down button again and again, to come to cwm. There you can install a zip file, in which the rom is.
Are you really sure the bootloader is unlocked? Did you do it by testpoint or sonys official method?
To flash a kernel, you need the boot.img. Before you start flashing the kernel, put the downloaded zip file of the rom on your sd card.
Then, and I would do it like this cause with the normal command line by windows it's the same, you open sony flash tool. There you click on the flash, select fastboot mode and on the right side there is select kernel to flash. There you choose the boot.img. Then you have to shut down your phone, and while you are holding volume up key, you connect phone to pc. There will light up the blue led and flash tool will automaticly flash the kernel. READ THE LOG BEFORE YOU PLUG OFF DEVICE!! If the log is ok (there are no errors), you can plug off device and turn it on. While booting, you press volume down again and again. Then you have to follow the tutorial to the rom (what has to be formatted or wiped and how to install the rom itself. Cause after flashing the kernel, you must install the rom or your device won't boot up!
Okay, now we could do an example:
If you want an ics rom, I would take cyanogenmod 9. Here's a guide:
Download the zip file from here.
Then you extract the zip file, so you have one packed zip file and one unpacked. The packed zip file you copy to your sd card.
In the unpacked, there's a boot.img. If it isn't named boot.img rename it, so it's name is "boot", but windows detects as an image file.
You open sony flash tool and click on the flash, select fastboot mode and then choose "select kernel to flash". Choose the boot.img (make sure it is named boot and it is an image. In flashtool the image you choose should be named boot) and shut down phone. Hold volume up key that the blue led shines, and the kernel is flashed after seconds. Now see the log, if there's no error, plug off the device and power on. While powering on you press the volume down button again and again.
Now you are in cwm. There I would do a backup first. When the backup has finished, you make a factory reset and wipe cache partition.
Then select install zip from sd card and choose zip. There you choose the cm9 zip you copied to your sd card. If it finished installing (don't power off device while installing, sometimes you could think it stuck, but normally it won't. Just wait and drink a coffee!) you can reboot device and normally it should work.
YOU DO THAT ON YOUR OWN RISK. FOR ME ON MINI PRO IT WORKED, BUT I CAN'T PROMISE!
Hope it works and keep up! In the end you will hopefully enjoy your rom (maybe cm9)
Greets
Michael
Click to expand...
Click to collapse
That won't work if you have no unlocked bootloader! Do this only if you are sure, the bootloader is unlocked!! If it works, it'd be nice if you could tell me!
Michi_optimus_me said:
Okay, so:
The kernel is seperated from the rom. If you have unlocked the bootloader you can flash a kernel. In most kernels, cwm is included, so you flash the kernel and then you can boot up. While booting you press the volume down button again and again, to come to cwm. There you can install a zip file, in which the rom is.
Are you really sure the bootloader is unlocked? Did you do it by testpoint or sonys official method?
To flash a kernel, you need the boot.img. Before you start flashing the kernel, put the downloaded zip file of the rom on your sd card.
Then, and I would do it like this cause with the normal command line by windows it's the same, you open sony flash tool. There you click on the flash, select fastboot mode and on the right side there is select kernel to flash. There you choose the boot.img. Then you have to shut down your phone, and while you are holding volume up key, you connect phone to pc. There will light up the blue led and flash tool will automaticly flash the kernel. READ THE LOG BEFORE YOU PLUG OFF DEVICE!! If the log is ok (there are no errors), you can plug off device and turn it on. While booting, you press volume down again and again. Then you have to follow the tutorial to the rom (what has to be formatted or wiped and how to install the rom itself. Cause after flashing the kernel, you must install the rom or your device won't boot up!
Okay, now we could do an example:
If you want an ics rom, I would take cyanogenmod 9. Here's a guide:
Download the zip file from here.
Then you extract the zip file, so you have one packed zip file and one unpacked. The packed zip file you copy to your sd card.
In the unpacked, there's a boot.img. If it isn't named boot.img rename it, so it's name is "boot", but windows detects as an image file.
You open sony flash tool and click on the flash, select fastboot mode and then choose "select kernel to flash". Choose the boot.img (make sure it is named boot and it is an image. In flashtool the image you choose should be named boot) and shut down phone. Hold volume up key that the blue led shines, and the kernel is flashed after seconds. Now see the log, if there's no error, plug off the device and power on. While powering on you press the volume down button again and again.
Now you are in cwm. There I would do a backup first. When the backup has finished, you make a factory reset and wipe cache partition.
Then select install zip from sd card and choose zip. There you choose the cm9 zip you copied to your sd card. If it finished installing (don't power off device while installing, sometimes you could think it stuck, but normally it won't. Just wait and drink a coffee!) you can reboot device and normally it should work.
YOU DO THAT ON YOUR OWN RISK. FOR ME ON MINI PRO IT WORKED, BUT I CAN'T PROMISE!
Hope it works and keep up! In the end you will hopefully enjoy your rom (maybe cm9)
Greets
Michael
---------- Post added at 12:31 PM ---------- Previous post was at 11:34 AM ----------
That won't work if you have no unlocked bootloader! Do this only if you are sure, the bootloader is unlocked!! If it works, it'd be nice if you could tell me!
Click to expand...
Click to collapse
Bootloader IS unlocked from SE website. I used the unlocking-relocking toil by quaghi. Wow! So many steps in this phone..... And thanks, CM7/CM9 was also one of my choices, though the wife prefers smulrronic..... Thanks a ton you guys......
Sent from my HTC Incredible S
Tried all methods, flashtool, adb & fastboot commands, and everytime I get to a softbrick/stuck at bootloader.
Facts:
1. Bootloader is unlocked (unlock method SE official). Checked by *#*# SERVICE(7378423) #*#* & got no output.
2. Am able to downgrade to .42 firmware and root that firmware (stock gb).
From that point onwards, when I try to flash a new kernel (boot.IMG), or a custom ICS ROM (smultronic & real ICS 5.2) I end up losing boot, root and end up at bootloop. It's all as clear as mud!
I suppose I have to relinquish this phone to my wife,while I try to find out a way to get a rooted ICS ROM up and running on the Xperia ST15i. Any help from this community will be gratefully accepted.
Sent from my HTC Incredible S
But you can use it with the stock bootloader and gingerbread?
With this your phone boots up?
mihahn said:
But you can use it with the stock bootloader and gingerbread?
With this your phone boots up?
Click to expand...
Click to collapse
Tried that too. Does not boot.
Sent from my HTC Incredible S
So the device is bricked up atm?
Can you enter cwm or does it vibrate if you try to turn it on?
Have you tried multiple kernels right now?
Device is ok till I root on .42. Firmware. Thereafter I can't seem to get any custom ROM to boot. After installing CWMR and flashing a custom kernel (x-kernel, krish kernel) & thereafter wipe data, system, cache &dalvik & flash smultronic or clean ICS 1.5 thru aroma, I always seem to end in a bootloop (that too with the gb boot showing Sony Ericsson, not the Sony - Xperia ICS boot). To get back, I have to flashtool the .42 ftf and use the doomlord zergrush exploit to re-obtain root. What am I doing wrong?
Sent from my HTC Incredible S
You should install Android Android 4.0.4. You have to flash it with flashtool.
NEVER UPDATE OVER THE AIR IF YOU HAVE AN UNLOCKED BOOTLOADER!!!
So just flash Android 4.0.4 . Download an android 4 kernel like Extended Stock Kernel from here and download the android 4 rom (4.1.B.0.431) for your xperia mini here. Then you download Real Ics from here.
Then flash the kernel in fastboot mode and without restarting flash the android 4 rom in flashmode.The rom isn't rooted, but you don't need to root, cause cwm is included in the kernel! Then restart. If it restarts you can go on. Shutdown and enter cwm.
There you don't wipe anything!!! Don't format system etc!
You just install the zip from sdcard and after the installation is complete and before you reboot you make a factory reset and wipe dalvik cache...
Then you restart.
Normally it should work!
Greets
Michael
@Michael,
Dankeschön. Will give the way you describe one last try.
Edit....
My wife connected her phone to the laptop and the SEUS updated the phone to stock ICS 4.1xx. Not a big problem I assume, coz I downgraded from that very version.
Sent from my HTC Incredible S
I SOLVED IT!!!! You guys on the Xperia 2011 section are quite unkind to noobs & neophytes. I was wondering... 'After all it is the same Android OS. What can be so difficult in this device?' I did some more research and decided to give it another try:
1. Starting point... ST15i at stock ICS 4.1.B.0.431 firmware with locked boot loader (after a mistaken connection to laptop and SEUS updated to locked boot loader ICS firmware... iI think it is the Sony Smultron WWE equivalent).
2. Ran SE Boot loader Unlocking v1.6 by quangnhut123 (Excellent tool BTW). Got boot loader unlock from SE Official method.
3. While in the same boot loader Locking/Unlocking tool, flashed EXtended Stock Kernel - v2 for 4.1.B.0.431 from fastboot (Blue light, vol up and insert USB?). The kernel is pre-rooted with busybox and has DoomLord's version of CWMR.
4. Viola!!! Root on Stock ICS firmware with CWMR. Here's to you boors who told me that ICS on this phone could not be rooted!!!!
Thanks Michael, you helped me think while every other thread advised outrageous actions and i was quietly led up the garden path (Auf Eis gefurht!!!)
Presently wife prefers stock and wishes only to delete bloat system apps and use hostfiles to block ads.... Hope others find my post helpful to root their devices too....
Sent from my Incredible S
[Q] ACER Z3/z130 Europ is there a CWM recovery & zip file of the original recovery
I've misteriously bicked my phone an remain locked in the boot proces....
Time to flash a new stock rom
as I'm flashing I prefer CMW as recovery above the unclear asus one (although I would like to be able to reflash the old one [warranty issues)
Can anyone give me a pointer scanned all of google (possibly the wrong way)
Thanks in advace]
dreuzel said:
I've misteriously bicked my phone an remain locked in the boot proces....
Time to flash a new stock rom
as I'm flashing I prefer CMW as recovery above the unclear asus one (although I would like to be able to reflash the old one [warranty issues)
Can anyone give me a pointer scanned all of google (possibly the wrong way)
Thanks in advace]
Click to expand...
Click to collapse
http://us.acer.com/ac/en/US/content/drivers - Click on O.S.
You'll find your stock system there. Instructions for loading it are included in the zip downloaded. I believe the EMEA Gen1 is for the generic worldwide version, but you might want to verify that. I know that the ORGFr one is for Orange France and the little "s" at the end would signify single SIM versions.
Found this guide to install recovery:
One. Loads Famaroot Just "Framaroot-1.9.1.apk" follow the link here.
http://forum.xda-developers.com/attachment.php?s=e12cbb38af7dd8a173308bb ...
The. Apk to be installed on the Z3 - Z3s / Once installed, it's ordered by phone root app Famaroot.
Two. TWRP 2.4.4.0 files stored on your SD-Card llllllll2510 to post the link here.
https://docs.google.com/file/d/0B0XQigIT17uEcDQtaDJ3U0UtOWc/edit?pli=1
PS. Files Name TWRP24Recovery_Z130_D10-02-14.img.
Do NOT paste it in a folder deep secret I do not find.
Three. Install app "[ROOT] Recovery Tools - Flasher" on the phone to me.
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Then, with a flash TWRP 2.4.4.0 [ROOT] Recovery Tools - Flasher by.
Select top (Flash Recovery) and select the top (Other from Storage).
Then browse to the file TWRP24Recovery_Z130_D10-02-14.img. Flash to order
At the end of the process [ROOT] Recovery Tools - Flasher will ask you to reboot into recovery-mode or not.
I answered yes to the reboot to check the flash recovery ... we just finished it.
NOTE ***: It may cause damage to the machine. Or insurance
You must accept the risks in the operation of your own.
I found this on a forum that was in a foreign language to me and used Google Translate to get this info. You can find the original thread here:
http://droidsans.com/node/153986
For returning to stock for warranty issues, just use the original firmware you downloaded from Acer.
Tried the first part flashing the ROM using the provided stock Roms.
That failed it downloads but as soon as first real install occurs it rejects and aborts install access or accept error.
And returns the key part of the file name
I think? No expert at all ? The stock ROM updates do not match the previous ROM on my z30. Do not exactly know the specs of my original ROM proximus.... ??? Would have preferred gen ROM overriding all that stuff?
Or do I need to force adb/ fastboot only to load the system partition.???? But what is the adb/ fastboot command then exactly do I need to expand the zip a second time? After extract zip and instruction PDF?
Will delay cwm tarp after first signs of life of the phone.
Thanks for your answer
sometimes I know.
often I do not know.
Its always good to be able to ask.
I have unlocked my tablet using Sony Developer tools. I then tried to downgrade with flashtools to a kitkat firmware . I tried 2 different firmwares for SGP 321 but both give me a boot loop.
I am using flashmode to flash , should I use fastboot mode?
any other firmware I should try or settings in the flashtool?
these are the ones I tried: SGP321_4.4.2 _10.5.A.0.233 3AT .ftf. SGP321_10.1.1.A.1.307_Customized_FR.ftf
All I want is a rooted tablet z with whatever firmware on it.
Appreciate your help
When you say boot loop, do you mean the screen goes black and starts to boot again?
Or do you mean the boot animation is repeating for a long time?
The first time you boot up after flashing an ftf will take a long time. It can range from a few minutes up to tens of minutes.
Did you select wipe USERDATA when you flashed the ftf in flash mode?
Try that if you haven't. See attached screenshot.
Checking it will wipe all your apps, data and internal storage.
I'd recommend you use the latest ROM, 10.7.A.0.228. Root and Xposed works on Lollipop 5.1.1.
Here is a Generic Germany FTF 10.7.A.0.228.
You'll need to root it by flashing supersu zip in recovery.
If you don't have a recovery flashed/installed, you should flash one.
Let me know if you need instructions on installing a recovery.
fantastic, that little trick did the job and I am now on 4.1 .
I am considering now to flash your firmware but could you give me some detailed instruction on what to do please, especially the recovery part.
thanks a lot again.
No problem.
Requirements
Program to open ZIP files
Flashtool (flashtool.net/downloads.php)
Flash mode and Fastboot drivers installed (Comes with Flashtool. Find the installer at C:\Flashtool\drivers\)
A few things you should know about recovery
If you plan on using an official Sony ROM with an unlocked bootloader, the recovery needs to be part of the kernel image.
Sony's official kernel images do not contain a recovery.
The kernel gets overwritten when you flash new ROMs (Official and Custom), so you will lose recovery every time you flash a ROM.
Thus you must reflash the kernel with recovery every time you change ROMS.
Kernel's for different versions of ROMs should not be used interchangeably.
It always best to use the kernel made for the ROM.
Flash official ROM before flashing recovery
If you are planning on using an official ROM, flash the official ROM in Download Mode before flashing the recovery (for the reason mentioned above - kernel gets overwritten).
You should wipe USERDATA to minimise compatibility issues.
Do this first before proceeding.
Downloading a kernel with recovery
Fellow xda member [NUT] has an awesome kernel builder tool which allows you to create kernel images with built in recoveries.
Head over to nut.xperia-files.com and navigate to XZDualRecovery > Kernel Builder
Check the checkbox "Yes, I have unlocked my bootloader!".
Select the Make and model of your device (Xperia Tablet Z SGP321 in your case).
Then select the firmware version you will be using (10.7.A.0.228 in your case).
Cross your fingers. If someone has already uploaded the kernel for that version, you can simply download the link provided. Otherwise you will need to upload the kernel. If you have an FTF, simply open it as a zip file and upload the kernel.sin inside.
Flashing Kernel with Recovery
Open the zip file downloaded from the Kernel Builder and open the tmp folder. Extract the boot.img file inside the tmp folder to somewhere on your computer.
Open Flashtool.
Click on the Flash Icon.
Select Fastboot mode.
Click "Select Kernel to Flash".
Put device into Fastboot mode. (2012+ devices: Press and hold VOL+ button while plugging in USB cable)
Once connected, a file selection dialogue will show. Select the boot.img file extracted earlier. You may need to select the type of file (sin, elf, img) before you can see the file in the explorer.
Flashing will start immediately after selection. Check the log and ensure there are no errors.
Unplug the USB cable.
You now have recovery (Two recoveries to be specific - as XZDualRecovery has PhilZ and TWRP).
I would recommend TWRP as it is easier to use and has more features than PhilZ (Based on CWM).
The VOL+ key is associated with PhilZ and the VOL- key for TWRP.
To enter recovery, simply turn the device on and when the notification LED turns Magenta (Pink) start pressing the button associated with the recovery you want to use.
e.g. Press VOL- a few times for TWRP.
Flashing zips
Copy your ZIPs to your SD card.
In TWRP, tap the Install button.
Select the zip file you want to flash
Swipe to the right to start flashing.
Rooting
Download the latest SuperSU zip (download.chainfire.eu/supersu)
Copy to SD card.
Flash zip in recovery.
Enjoy root.
about to start the process, just wanted to clarify some things:
what zip files are you talking about putting on my sd card? is this the file I downloaded from NUT?
thanks again for your help
Just in general, to flash a zip, you would perform those steps.
You would want to flash the SuperSU zip to get root.
You can also flash the file downloaded from NUT.
It will install a program called NDRUtils which will allow you to reboot into recovery from within Android.
I just saw when I wanted to flash the firmware from your link above (Here is a Generic Germany FTF 10.7.A.0.228.) that this identifies as for device C6603. But I have SPG321.
Do you have a link to a firmware which would work with your way and is for my device?
Oh, sorry about that. Forgot to check the model. I grabbed it from XperiaBlog.
I think I should just explain how to download and create an FTF for yourself from Sony's servers.
Install the latest Flashtool if you haven't already.
Start Flashtool
Click on the XF icon (The rightnost icon)
In XperiFirm, select the series and model of your device (Xperia Tablet Z > SGP321)
Then select the Market+Operator for your country/region. The market only differs by the apps that are pre-installed, which can be removed. Your region may not have the latest firmware available, so you can click the "Check All" button to get the versions of all the markets. You may wish to avoid commercial Operators as they can have different boot logos etc. Download a "VMo" or "Customized" operator if possible. The 228 firmware is only out in a few regions at the moment, so Germany VMo DE would be a good choice.
After selecting a row for the firmware you want, click on the latest version near the top right corner.
A window will show the details of the ROM. Click Download to start downloading. The downloads will get saved to FlashTool's Firmware Download folder.
Once the download completes, close XperiFirm.
In Flashtool, Click Tools > Bundles > Create.
Select the downloaded folder (Which should be in C:\Users\<Username>\.flashTool\firmwares\Downloads).
Double click in the device field to select the model of your device
Branding should be set to the Operator you downloaded (e.g. Generic DE)
Version should be set to the ROM version (e.g. 10.7.A.0.228)
Then in the folder list, select every item except for .ta files (e.g. cust-reset.ta, fota-reset.ta). Click the -> button to add to the Firmware Content.
Click create.
An FTF file will get created in the firmware folder. You can start flashing it in Download Mode.
If you need some screenshots. The procedure may differ slighty.
xperiablog.net/2015/03/17/guide-to-installing-xperia-lollipop-using-xperifirm-and-flashtool/
pls erase fwinfo.xml file from bundle pack of sgp321 firmware and again flash
Bilbo0a said:
I have unlocked my tablet using Sony Developer tools. I then tried to downgrade with flashtools to a kitkat firmware . I tried 2 different firmwares for SGP 321 but both give me a boot loop.
I am using flashmode to flash , should I use fastboot mode?
any other firmware I should try or settings in the flashtool?
these are the ones I tried: SGP321_4.4.2 _10.5.A.0.233 3AT .ftf. SGP321_10.1.1.A.1.307_Customized_FR.ftf
All I want is a rooted tablet z with whatever firmware on it.
Appreciate your help
Click to expand...
Click to collapse
pls erase fwinfo.xml file from bundle pack of sgp321 firmware and again flash from flash tool