So... I failed, and the glass has one crack on it that stretches from one side of the screen to the other near the bottom. Most people wouldn't mind it, and it could in fact be taken as maybe just a worse than usual scratch. I care a lot about it though, and it bugs the living sh** outta me! >:O
I was wondering if anyone could provide me with a step by step manual screen replacement tutorial, or video of some sort. I would get it fixed by some third party store, except they're charging over like $200... And I can't get warranty from Rogers since I'm a Fido customer, and because it wasn't even bought directly from Rogers. Or maybe there's some other solution to fix the screen? Like I heard of that scratch filling screen, maybe that'll do something.
Thanks for your help!
Just fyi, on the Razr the glass and display are glued together making it impossible to replace just the glass.
Here's a tear-down of the phone:
http://www.ifixit.com/Teardown/Motorola-Droid-RAZR-Teardown/7048/1
so anyone successfully replaced the LCD screen & digitizer ?
i have a cracked screen and would like to do this.
cheers.
edd32 said:
so anyone successfully replaced the LCD screen & digitizer ?
i have a cracked screen and would like to do this.
cheers.
Click to expand...
Click to collapse
Im also looking to find a way to defuse the two i have two RAZRs one with cracked glass one with cracked lcd wondering if i can make one with all the good parts and sell the other for parts but all ive heard is how to seperate the two but not how to place them together..
Related
Hi there!
I didn't put a screen protector on my TD2 -and over time it has become more scratched than expected. I'd like to replace the front display -I guess that is the one called the digitizer, or?
http://cgi.ebay.com/Touch-Screen-Di...wItemQQptZPDA_Accessories?hash=item4837633bd0
What are the chances for getting an original HTC at ebay?
Did anybody do this replacement with success?
Cheers
No one?
check this out too!!!
more expensive and not a word about oem product!!!
So... oem digitizer with just 19$ .... hmmmm! don't know!!!!
Perhaps this guide can help you.
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Hopefully not.. But I think it's only glued to the frame.. I don't really know what kind of glue to use for the new one though...
ren28 said:
Hopefully it's not permanently attached to the LCD like the ATT Fuze is. I took my Fuze apart and destroyed the LCD while trying to install a new digitizer. Apparently they use some sort of extremely strong glue between the digitizer and LCD...
Click to expand...
Click to collapse
Sorry to tell you all that the Digitizer is permanently attached with LCD. I know this because I was drop my D2 and went to service center. They change to front cover (case) which was broken when droped. when I get it back they give me back my old front cover and I notice that the digitizer is stick with over part.....
When I ask the service's counter. They told me that they have to change the new digitizer because it come with whole part.. not saparated.
Sorry for my english....
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
niknik76 said:
Hi Guide144, you say that when you got the digitizer back it sticked with the 'over part'. To my ears that sounds like the FRAME and not the LCD? Are you sure that it's also attached to the LCD?
Click to expand...
Click to collapse
Sorry for lag of my understanding, Yes the digitizer is stick with front frame, not a LCD. In my case, I ask the service to change my front cover because it broke and they change the front cover + digitizer.... because it stick together.
Hope this would clear all out.
Hi guys,
i replaced today the broken digitizer of my topaz.
Got one for $60 from ebay, with a screen (i wasn't sure if it was a screen problem or digitizer so i got both.)
you need to unstick the old one from the housing and attach the new one. i didn't use extra glue/stick , since the old one was left on the casing.
cheers
Thanks mistral82cy! Thanks for sharing -now I feel a little more up to going ahead with the operation
Hi! Could you please tell me how much the service center charged you to get the new cover and digitizer installed?
I've to change mine, as well!
Thanks a lot
I would suggest finding the parts list for the phone and finding out exactly what digitizer is needed then buy one online from somewhere such as e-bay. I did this with my G1 replaced it myself and it worked wonderfully. Research before you buy otherwise you might end up buying the wrong one or a clone which doesnt work as well
I dun it myself, buying one digitizer from ebay, getting the old one out was a little tricky , but appart from that it was easy(and i had to do it again, as i dit not secure it properly and there was dust comming underneath the screen from the sides. Any questions you could ask, but it is pretty straight forward.
pistonripper changed his housing, so he would have also replaced his digitizer, so you might want to check with him
http://forum.xda-developers.com/showthread.php?t=572728
If you want to buy one, this would be a good choice
http://cnn.cn/shop/touch-diamond2-digitizer-p-6733.html
replace digitizer on your own!
Hello everyone!
My digitizer broke last week, because i droped my Diamond!
But don't worry I am a rookie in technical things and I managed it to replace my digitizer on my own.
Don't waste money on repair charge from repairshops! Ok... you loose your garantie but the Cellphone is allready old. The new HD2 is already available!
Just buy the digitizerscreen at ebay... i've paid 60 € and then use this manual:
http://www.pdacenter.ru/razborka/htc-touch-diamond2/
Now it works like before.
Bye Ghostina
HTC Pure Digitizer or LCD
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
darkside896 said:
i just got my new AT&T HTC Pure and somehow my screen is cracked. The LCD does not appear to have any bleeding or damage and the touch features work, but I have two cracks from top to bottom on my phone. what are your thoughts. I attached some pictures
Click to expand...
Click to collapse
It's a bit hard to see on the photos but if its new can you not return it? if not then you need to look closely between the digitizer and the screen and see if the damage is just the top layer or the screen, if it is the top layer then just replace your digitizer!
spammer said:
It is easy to do it, if you need, I can send you the instruction that how to change it to you. You can visit my website --spam-- for this product Touch Screen Digitizer For HTC Touch Diamond 2 II T5353
Hope that it will help you.
thanks
Click to expand...
Click to collapse
Every single post of yours is a website promotion.
Chill.
Out.
Seriously.
As always this site is a big help. Just ordered the items, and thanks to the guide I'm fairly confident I will pull it off. For me the bottom 2cm's of the screen have shifted about 1cm to the left somehow. The digitizer still works "perfectly" but it's kinda hard to hit the right buttons like that
hi
I have some scratchs on my screen and I am looking for a replacement digtizer.
I found several on ebay,
http://shop.ebay.com/i.html?_nkw=xp...+screen&_osacat=0&_trksid=p3286.c0.m270.l1313
Have anyone replaced the digitizer or know if this are original?
Thanks!
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
ClintonH said:
Did you remove the factory screen protector for some reason and not replace it? Or did your phone not come with a factory screen protector?
Click to expand...
Click to collapse
Hi
I removed the factory screen protector. when I got a couple of scratches I applied a new protector.
But the few scratches I have are ittitating me!!!!
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
--duplicate--
I wish one of these ebay listings gave a part number or model number for the digitizer... for obvious reasons.
trojjanhorse said:
Hi, I recently changed my digitizer. Put on a black one on my white phone. They are all real, I have not seen any fakes around. I also bought mine off of ebay.
Click to expand...
Click to collapse
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
mezo9090 said:
Is this digitizer is the same part i need to change when my screen gets cracked ?
The story is my phone fell down and the screen got cracked and kinda ink appeared around the line of crack..
I was really wandering which part to change since the touch was working fine..
sent from my x10i that is banging for a 2.1 upgrade. ...
Click to expand...
Click to collapse
Hey Mezo,
The digitizer is factory glued with the top glass and is considered one piece since you can't separate the two. The LCD is separate from the digitizer. If your LCD is cracked, then your display will be distorted with lines across the screen. If your top glass is cracked, then your digitizer will still work since the digitizer is not as fragile as the top glass. So the question is, is the top glass cracked? Is the LCD display cracked as well? I know your digitizer will still be functioning but you might want to consider buying a new one as for the cracks may be unappealing and annoying.
I simply broke the top glass and I did not like the crack spanning across my screen so I got myself a new one.
If your LCD is damaged then you need to buy a new LCD which is not cheap... (over $100).
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
mezo9090 said:
@trojjanhorse
the top layer which i touch is functional, so that means i have broken the LCD ?
i appreciate if you have a look on them i attached some pic, i hope they are clear enough since i took them with 3mp cam
thanks for the help in advance, i don't know much about mobile displays
Click to expand...
Click to collapse
Most likely you have broken the LCD. When dark pixels appear like that, it usually means that you've directly struck the LCD itself and damaged that area.
It was a thin line at first then some Ink started to flow and became bigger the next day.
So its the LCD?
should I fix it at the service center or i can replace it myself?
sent from my x10i that is banging for a 2.1 upgrade. ...
You can, in theory, fix it yourself but it'll be a biatch of a job. Use the X10 undressing post to find out how to actually take it to bits...
Then put the new LCD in.
only issue is finding somewhere that sells them... I don't know if they're a generic 854x480 lcd or what so...
To change LCD is very simple, but to change the digitizer is suicide. You will need to get a new LCD. I would buy one off of ebay and install it myself. I've been fixing phones for 2 years now so I had my share of experience but it may be difficult for you. The black liquid is due to the fact that LCD stands for "Liquid" Crystal Display
Good luck.
Hi. I have a problem with a minor crack on the front glass near the "go back" button. (I've marked it with red line on this picture: http://i51.tinypic.com/10rpybl.jpg )
So my question is what is the cheapest way to fix it? I have been thinking about SGP Glass but I don't like how it looks, however if there is no option to replace just a front glass, I will consider it.
i have the same question,
Is it passable to separate outer glass and LCD ?
on ebay you can find only glass, no connectors, that means it should be passable to separate them, does anyone tried to do so?
I would like to know that also. Anybody has experience with that?
it is possible, i have the same problem...but ideally you should use a special tool to seperate the digitiser (the actual touchscreen bit) from the glass.
and you'll risk breaking your working touchscreen if it goes wrong..
if the screen functions and the crack isn't that big...and if you can't afford to go the whole way and replace the lot....i wouldn't bother (i'm not and i have a huge spider like crack all over my phone.)
I dont think so. Mostly the Touscreen is bound to the Display.
Watch this Video around 2:45. You will see that he nearly destroyes the glass.
watch?v=k6Y6an6D2P | sry can post any Urls yet
But i cant also explain to myself why there are only "glass" sold on ebay
Glass Frame
hi everyone
to answer all your questions YES its possible but in-order to do so you'll have install a copy of the original glass which comes in full meaning the other half the your phone
this has happened to me, my phone slipped from my hand and fall to the floor the glass was shattered so i went to my friend a mobile phone reaper man and got the glass changed only and its was not that bad although there was no samsung logo i chose to install a glass copy because the price of the original is almost half the price of a new I9100
i hope this helps
iMatrix
imatrix83 said:
hi everyone
to answer all your questions YES its possible but in-order to do so you'll have install a copy of the original glass which comes in full meaning the other half the your phone
this has happened to me, my phone slipped from my hand and fall to the floor the glass was shattered so i went to my friend a mobile phone reaper man and got the glass changed only and its was not that bad although there was no samsung logo i chose to install a glass copy because the price of the original is almost half the price of a new I9100
i hope this helps
iMatrix
Click to expand...
Click to collapse
That is exactly what I need to do.... Replace the glass only! I already have the glass but need to figure out how to replace it without damaging the digitizer.
Maybe your friend can help?
The whole glass/digitizer is very expensive!
Please help!
clazaro69 said:
That is exactly what I need to do.... Replace the glass only! I already have the glass but need to figure out how to replace it without damaging the digitizer.
Maybe your friend can help?
The whole glass/digitizer is very expensive!
Please help!
Click to expand...
Click to collapse
This could affect the touch sensitivity badly. If the repair is too pricy for you, use a screen protector so you won't get cuts and save money for repair.
Sent from my digital submersible hovercraft.
A friend of mine has an ATT Titan (phone says PI39100) with a cracked front glass. I was looking to purchase a new front lens/digitizer for her phone and do the replacement. Most of what I find online are for the x310e.
Long question short: is the front lens for the x310e the same exact one as for the PI39100? or are the two not compatible?
Also, if someone can point to a DIY for doing this I'd appreciate it - otherwise, i'll take on it the same as the Galaxy Tab 10.1 I did earlier this week (using a hair dryer and an exacto knife) I would like to at least know the lens is the same so I can order soon.
Thanks in advance.
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
malvo26 said:
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
Click to expand...
Click to collapse
Excellent. This is EXACTLY what I was looking for. Thank you VERY much for your assistance
Oh, and it's the glass cover that's broken, because she's still able to (and currently continues to) use the phone. On ebay, I've seen the glass and digitizer going for under $30 shipped, so I think it's reasonable enough.
Thanks again. :good:
Glad to help. That's we are all here for: help each other.
Well finally broke my screen on my G3.. only appears that i broke the glass and not lcd/digitzer but from what I'm reading it's all sealed and not worth my time to try to separate?
I found this site that has LCD Screen and Digitizer Assembly with Front Housing (No Small Parts) for $89 which doesn't seem horrible. Just not sure what they mean by no small parts, I'm assuming they're referring to the cameras and motherboards.. Can anyone verify this is my best route? New to fixing phones, worked on plenty of small electronics just not a phone but I'm not near an upgrade and actually like this phone so replacing isn't an option.
Thanks for any help.. the broken section is causing my phone to do some wild things. =o/
steber04 said:
Well finally broke my screen on my G3.. only appears that i broke the glass and not lcd/digitzer but from what I'm reading it's all sealed and not worth my time to try to separate?
I found this site that has LCD Screen and Digitizer Assembly with Front Housing (No Small Parts) for $89 which doesn't seem horrible. Just not sure what they mean by no small parts, I'm assuming they're referring to the cameras and motherboards.. Can anyone verify this is my best route? New to fixing phones, worked on plenty of small electronics just not a phone but I'm not near an upgrade and actually like this phone so replacing isn't an option.
Thanks for any help.. the broken section is causing my phone to do some wild things. =o/
Click to expand...
Click to collapse
No, do not waste your time attempting to separate the glass from the LCD, you WILL break the LCD.
You would come out a little bit cheaper ordering the glass and LCD assembly alone BUT it can be kind of a hassle sticking that part down.
Ordering it with the frame/housing is 100% how I recommend going about the screen repair for a G3 since it comes glued to the frame/housing... it's less of a hassle you'd have to worry about. Just transfer all of the internals to the new frame and you're golden.
However, I will recommend that you order the screen from the link I provided below... as the warranty on this screen will be good for 1 year, plus it's even a little cheaper. They are just currently back ordered until the 7th, but it's well worth it for a 1 year warranty.
Good luck.
https://www.wholesalegadgetparts.com/product.php?productid=23575&cat=2424&page=1
steber04 said:
Well finally broke my screen on my G3.. only appears that i broke the glass and not lcd/digitzer but from what I'm reading it's all sealed and not worth my time to try to separate?
I found this site that has LCD Screen and Digitizer Assembly with Front Housing (No Small Parts) for $89 which doesn't seem horrible. Just not sure what they mean by no small parts, I'm assuming they're referring to the cameras and motherboards.. Can anyone verify this is my best route? New to fixing phones, worked on plenty of small electronics just not a phone but I'm not near an upgrade and actually like this phone so replacing isn't an option.
Thanks for any help.. the broken section is causing my phone to do some wild things. =o/
Click to expand...
Click to collapse
you are right, the small parts include camera, lcd foam, speaker, and so on, my customer had bought the vs985 lcd here, you can take a look, hope this will help you
My screen had a crack in it i had a tmo g3 layn round that had a bad sim reader so i jus swaped the motherboard and bam no more crack in my screen