Find myself in an odd predicament I may not be able to solve.
The LCD digitizer on my Fascinate went out, taking the screen with it. When it had started happening, I was using Powerwashed GB rom, on Clockwork Mod 3.0x. I had a previous backup, and made another one as well, and both worked fine when restoring to that phone.
I received the replacement, and assumed it'd be as simple as re-ODINing clockwork Mod, and then restoring the backup. Neither worked. So, I had a lot of my apps back up with Titanium, no problem, but I lost my version of Swype. I was one of I guess the lucky few who managed to grab the full version of the Nexus S Swype release before it got pulled. It exists in those backups, but I can't restore them, and the release isn't readily available anymore.
I've looked into extracting the .img files and finding both the Swype.apk and libswypecore.3.25.91.30637.so files to manually readd them, but seem to be at a brick wall as far as getting into them.
Any solutions, or am I just kicking a dead horse?
t_buzz said:
Find myself in an odd predicament I may not be able to solve.
The LCD digitizer on my Fascinate went out, taking the screen with it. When it had started happening, I was using Powerwashed GB rom, on Clockwork Mod 3.0x. I had a previous backup, and made another one as well, and both worked fine when restoring to that phone.
I received the replacement, and assumed it'd be as simple as re-ODINing clockwork Mod, and then restoring the backup. Neither worked. So, I had a lot of my apps back up with Titanium, no problem, but I lost my version of Swype. I was one of I guess the lucky few who managed to grab the full version of the Nexus S Swype release before it got pulled. It exists in those backups, but I can't restore them, and the release isn't readily available anymore.
I've looked into extracting the .img files and finding both the Swype.apk and libswypecore.3.25.91.30637.so files to manually readd them, but seem to be at a brick wall as far as getting into them.
Any solutions, or am I just kicking a dead horse?
Click to expand...
Click to collapse
there is a special nexus s version of swype?
I found no Swype on CM7/vanilla gingerbread, so I signed up for the swype beta at swype's website and I got the latest [which was way newer than what my Stock rom has] beta, and it works great.
When i would restore from a nandroid back up i would always flash the rom first.
Try flashing Power washed again then restore nandroid.
Titanium now supports extracting apps from cwm backups.
Sent from my SCH-I500
Domush, thank you for that, got it up and running.
mvmacd, the Nexus S version contains a Sprint skin for Swype that is, in my opinion, the best keyboard I've ever used.
Related
Every since i updated to the latest rom via the HTC website, i noticed my phone info now says T-Mobile_LEO, what's up with that? NORMAL or what?
Plus SPB Backup also recognises it as not the same device i made a backup on although it is, even if i backup using the same rom it thinks it's different.
Other then this weird thing the entire phone works flawless, was just curious as to whats up.
Thanks for any input.
mine does this too because the energy rom im using based on a rom for the tmous..... must be the same sort of issue.
its nothing to worry about, shouldn't cause you any problems.
I wouldn't advise restoring your backup from an old rom to a new rom anyway in case there are any incompatibility issues....
Just tried to restore my backup from SPB Backup which was made on this phone and when i get to the restore part it states the phone is different from the one which i made the backup ?? Anyone with any ideas what's up here ?
Why does it say it's T-Mobile_Leo in the first place as the rom update was downloaded from HTC's own website.
Anyone else had this same problem ??
I backed up everything and now i can't restore it properly.
121man said:
Just tried to restore my backup from SPB Backup which was made on this phone and when i get to the restore part it states the phone is different from the one which i made the backup ?? Anyone with any ideas what's up here ?
Why does it say it's T-Mobile_Leo in the first place as the rom update was downloaded from HTC's own website.
Anyone else had this same problem ??
I backed up everything and now i can't restore it properly.
Click to expand...
Click to collapse
First, you should only use SPB Backup to restore to the SAME ROM as was backed up. Otherwise you will have trouble. Not might, will.
You have to select the Force ROM Upgrade mode, and then just before the restore, check the options and select ROM upgrade. Then it should work.
Hi there,
Well, I just got my HD2 back from repairs, where they replaced the mainboard. The ROM seems to be the same, 3.14, but the phone ID is showing as T-Mobile_LEO. When I restored using SPB backup, it said the ROM was different though. What is going on here?
Thanks,
David
I can't figure it out either, exact same thing but my one happened with the rom update.
Weird.
Do some of you guys use Swype?
If yes, the naming of your device is "normal", Swype wouldn´t run with the "normal" naming.
Afaik, the Swype cab installs a certain file into the Windows folder.
If you remove it, the name would be normal, but Swype won´t run correctly.
Ahh. I use swype, I did not know it actually renames the device.
That actually makes sense.
Thanks for this finally cleared up now.
Brilliant.
Is there currently a recovery ROM for the g-Tablet version shipped by woot.com? This is a 3389 ROM with some customizations. Most, or possibly all, of these can be replicated easily since they consist primarily of some home screen setup, links, and a few apps including the Kindle reader, ColorNote, and Pandora.
Following the recommendation to do a data wipe after installing a replacement ROM appears now to mean that even with the backup.zip from my wife's unmolested tablet I'm unable to return the tablet to its actual original state.
If there is not, I currently have one woot.com g-Tablet that is unopened since my wife ordered one for herself after I'd ordered one for each of us. I'm planning to sell it, but if I can create a backup ROM without messing the tablet up for the eventual purchaser I'm willing to try.
I'd like the same thing, if you come across one or make one yourself.
I ended up doing a Format SD Card, thinking it literally meant the external MicroSD Card I had put in the device, because I had read this may help prevent force closes, but it formatted the internal storage which had my stock backup on it and left my MicroSD card alone. I should have copied that over to my PC before wiping anything, just in case, but I'm so used to Android phone hacking that I thought I could get away with it.
I had a ton of force closes with TNT Lite and rebooted, hoping it would help, but then it got stuck in a reboot-loop. So I ended up repartitioning the internal space (thus wiping it AGAIN ::sigh: and using nvflash to restore bekit version 1105 (nvflash_gtablet_2010110500) and OTA updating.
Woot ROM
Going to make one now. Finished charging my "woot" g tab and booted once to make sure it worked. Just installed clockwork. Making backup. Let me know if you still need it.
jm20 said:
Going to make one now. Finished charging my "woot" g tab and booted once to make sure it worked. Just installed clockwork. Making backup. Let me know if you still need it.
Click to expand...
Click to collapse
Yes I do, please.
uploading now....
uploaded
http://www.mediafire.com/?poe59nppdfqhizn
jm20 said:
http://www.mediafire.com/?poe59nppdfqhizn
Click to expand...
Click to collapse
Thank you for doing that. Unfortunately, it doesn't restore the tablet to its shipped state.
Edit: scratch that - I did eventually get it to do exactly that.
mstevens said:
Thank you for doing that. Unfortunately, it doesn't restore the tablet to its shipped state.
Click to expand...
Click to collapse
I'd originally assumed the way to use this would be to rename it to update.zip and use it in recovery. That seemed to flash something, but did not come close to restoring to the shipped state.
Next, I realized it was a clockworkmod backup and figured I could extract it to my clockworkmod backup directory and run a restore from it. This just gave me an MD5 checksum error.
Any more thoughts on how to use this?
Edit: see my later post. I did get it to work.
Do you need the ROM?
My woot Tablet Reset after the 3rd power cycle and restored itself to something besides the original shape I received it in. I thought it was ridiculous as it would not show the "Stock" Videos it was shipped with. Angry Birds also did not work originally. After it Reset things worked. I would return it in the state it is and say it didn't work almost at all when it first arrived.
The original active wallpaper was kind of cool though.
TomRathbun said:
I would return it in the state it is and say it didn't work almost at all when it first arrived.
Click to expand...
Click to collapse
My g-Tablet is working fine. It's just a bit messed up in terms of applications and links after I flashed a few ROMs and now I'm having trouble getting it back to its original state.
TomRathbun said:
My woot Tablet Reset after the 3rd power cycle and restored itself to something besides the original shape I received it in. I thought it was ridiculous as it would not show the "Stock" Videos it was shipped with. Angry Birds also did not work originally. After it Reset things worked. I would return it in the state it is and say it didn't work almost at all when it first arrived.
The original active wallpaper was kind of cool though.
Click to expand...
Click to collapse
Mine was the same way. I didn't wait until it was fully charged until powering it up and it had angrybirds and some other stuff loaded on it. None of it would run though, it would just force close out. After turning it off, waiting for it to fully charge, and then turning it back on did I get put through the new user wizard and everything worked right.
would these work?
Hello, I was curious to know if you had seen (and if it would work) the viewsonic stock Roms that are mentioned on another post in the g tablet section of this site. I can't post links yet but there is a sticky called "viewsonic G-Tablet ROMs frequently asked questions (read this first)" this is posted in the G tablet general section.
The 3rd post down in that sticky has "gtablet recovery firmware images (official viewsonic images)" and there are 3 versions available to download the latest being 3316. Could you flash to this and then do ota updates to get to the current version? I'm sure you'd have to get a few of the apps back yourself (angry birds, Pandora, whatever else came on it) but wouldn't this get you pretty close to how it was when you got the gtab? I'm new to all this and am just throwing this out as a suggestion. I'm curious to know if this is all you'd need though.
barcod21 said:
Hello, I was curious to know if you had seen (and if it would work) the viewsonic stock Roms that are mentioned on another post in the g tablet section of this site.
Click to expand...
Click to collapse
Those work pretty much as expected, but they don't restore the tablet to its state as shipped by Woot. Not having seen any other g-Tablet, I can't be certain but I strongly suspect they do restore the tablet to what it would have been if I'd gotten it from Sears or someplace. I already know I can rebuild it. I'm just looking for the lazy way and, ideally, to get it *completely* back to stock, i.e., any updated drivers or other things that may not be immediately obvious.
So, I did get jm20's file to work for restoring my woot.com g-Tablet to its original shipped state. There may be several ways to do this, but I'll outline what worked for me.
- installed clockworkmod and booted into cwm recovery.
- did a data wipe and formatted all partitions then rebooted, whereupon I naturally got an error.
- rebooted into APX mode.
- performed an NVFlash restore.
- as soon as the tablet rebooted and asked if I wanted to connect via USB, I connected without doing any setup.
- via USB to the tablet, created a directory clockworkmod in the root of sdcard (on the tablet, not the removable SDHC card) and a subdirectory backup within that.
- on my computer, extracted the directory 2009-01-01.00.26.55 from the downloaded .zip file.
- copied that directory via USB into /clockworkmod/backup.
- reinstalled clockworkmod.
- rebooted into cwm and ran a restore of the directory I'd copied.
At this point the tablet now looks and acts mostly like it did when I first opened it. The only problem is that OTA updates no longer work because of clockworkmod. I addressed this via NVFlash using the following in a command window:
- nvflash.exe --bl bootloader.bin --download 9 recovery.img
whew!
Sorry about the lack of instructions
I am really busy with a bunch of other stuff, and I'm just playing with the G-tab when I take a break. The file I uploaded is as you figured out just a direct copy of the folder that clockwork recovery made when I told it to backup the "unused woot g-tab"
Like I said I only booted it up once to make sure it worked and then I immediately made the backup which is why the date says 2009.
After the backup was done, I copied the folder that clockwork made which contained the backup files to my desktop. I then zipped it up and uploaded it to mediafire.
Therefore the zip file is not a file that clockwork can use to restore the ROM, however if you extract the folder/files from the zip file and copy them to the g-tab, clockwork will recognize the folder and will do a full restore from that folder / files.
Sorry for the confusion.
A few other things:
I bought two of these from Sears as soon as they came out (late October 2010). I opened one and tried to use it. The stock ROM barely worked. It was basically useless. I knew the hardware was great but it was crippled by the ROM. I installed clockwork and flashed a few ROMs and found Vegan to be the best of the bunch, however even that left much to be desired as it was still very early on in the whole scheme of things.
After two days of using the one I had opened, things weren't looking good and I returned the unopened second one.
After about 10 days of trying to see the positives, I couldn't take it any longer and the first had to go back also. Unfortunately I had rooted it and installed clockwork and I simply couldn't bring myself to return it in that condition so I spent somewhere around 12+ hours reading various forums (mostly this one, android forums, and android central) figuring out how to completely return the unit to "stock". No traces of clockwork or any other boot manager and I put a clean stock ROM back on it.
Two reasons why I mention all of this:
1. If someone is needing to do this, it can be done unfortunately I have no idea how I did it and didn't bother to keep the files or information because I swore I'd never buy another G-tab (woot made a liar out of me).
2. If you are considering using an older "stock" ROM, don't waste your time. The woot ROM is actually pretty good. Had I known the woot ROM was halfway decent I would have bought two of these. Any of the newer ROMs are probably better than what I initally experienced.
Lastly, if anyone cares; I am currently running Calkulin's ROM with Clemsyn's kernel and I must say I am impressed. The unit is stable and very fast. Those guys have done some great work. Finally some great software that can take advantage of the hardware. Again, had I known things had gotten so much better I'd have ordered two.
If you guys are running something else and you like it let me know, I haven't had time to mess with the other ROMs.
OK, I have got to get back to work. Hope this helps.
Clarification
jm20 said:
Going to make one now. Finished charging my "woot" g tab and booted once to make sure it worked. Just installed clockwork. Making backup. Let me know if you still need it.
Click to expand...
Click to collapse
Brand new Android user here. My Woot gtablet reset itself also after the third reboot to something other than the original. If I figure out how to insert your Woot ROM zip file, this will restore the gtablet to it's orginial state?
Thanks
TomRathbun said:
My woot Tablet Reset after the 3rd power cycle and restored itself to something besides the original shape I received it in. I thought it was ridiculous as it would not show the "Stock" Videos it was shipped with. Angry Birds also did not work originally. After it Reset things worked. I would return it in the state it is and say it didn't work almost at all when it first arrived.
The original active wallpaper was kind of cool though.
Click to expand...
Click to collapse
I had this experience as well. (This Woot tab is my second g-tablet.) I updated it immediately upon the first boot, then rebooted. One or two reboots later, a setup screen magically appeared. After going through the setup process it seems that all of the original woot settings were now gone.
It also seems that Adobe Flash is no longer installed, and has to be re-installed. I haven't tried Angry Birds yet, but I believe that the latest firmware update comes with that pre-installed. Flash can be re-installed by downloading it from the ViewSonic g-tablet "Favorites" page, or use this link and reboot after installation:
http://www.freewarelovers.com/android/download/temp/1291899570_Adobe_Flash_Player_10.1.95.1.apk
As for being able to return to a "stock" firmware, I always save the updates before allowing it to install them. I believe they can be found in the /cache folder after it downloads, and must be copied to external storage before you run the update. I haven't actually tried to use these to restore to a stock firmware, but I believe that you just copy it to /mnt/sdcard and rename it to update.zip.
These are the versions that I saved:
update-smb_a1002-2967-user.zip
update-smb_a1002-3053-user.zip
update-smb_a1002-3588-user.zip
Edit: None of these are the "Woot" version.
Hi,
I am new to Android and the Gtab. I am basically curious as to what the best way is to backup my Gtab. What software and the steps to take (what is the difference between cwm and nvflash?).
I actually like the stock rom but my biggest frustration is the lack of the market which I would like to have. Having that said, I would like to run something different on the Gtab which will support the market app and not the Gmarket app. I looked around the forums and I see lots of good tutorials but it confuses me on how I backup with my stock rom before I begin any of the tutorials to upgrade to a new rom. I feel like backing up is the biggest step and don't want to mess this up so that I can revert back if I do make a mistake down the road. I'm sure once you do this a couple of times it starts to make sense but I have not done it yet and want to make sure I understand everything before I move forward.
I am a beginner but want to be able to get more out of my Gtab. Please help.
It needs to be modded right out of the box, so how much could you have possibly gotten installed?
Ok, I'm kidding.
What are you trying to "backup"? If it's DOC's and Books, music, etc, either dump it all onto a secondary memory card, or dump your data to a PC using usb connection. As for settings like email, etc. I say skip the backup and just reinstall the stuff.
I keep all of the working installers I've found on my external SD card so if I need to wipe & start over, I just go through and click/install them again.
bnovak said:
It needs to be modded right out of the box, so how much could you have possibly gotten installed?
Ok, I'm kidding.
What are you trying to "backup"? If it's DOC's and Books, music, etc, either dump it all onto a secondary memory card, or dump your data to a PC using usb connection. As for settings like email, etc. I say skip the backup and just reinstall the stuff.
I keep all of the working installers I've found on my external SD card so if I need to wipe & start over, I just go through and click/install them again.
Click to expand...
Click to collapse
Hi,
Thanks for the post. I think I may have not worded my question right. My fault since I am new. What I mean is what do I need to do to backup my current OS I suppose. For instance, it has android 2.2 correct? I upgraded OOTB to firmware 3588 which works well but no market. What do I need to do to back this OS up so that I can revert back to it in case of any problems? Sorry if I am still confusing you guys but like I said earlier, I am completely new and still learning the phraseology and such. Thanks!
jetguy35,
Most people get Titanium Backup and backup the apps and system with a batch file in that.
That takes care of apps.
If the whole tablet gets messed up you either NVFlash back to the bekit 1105 version
per the NVFlash recovery thread in developers, if its not too bad you reinstall the
current 3588 version from a download.
There are other ways some people suggest, but I don't recommend what I haven't used and don't know about.
Good Luck!!!
Rev
An app called Titanium Backup will allow you to back up your apps and their data.
To do a complete system backup, you'll need to get clockworkmod installed (bekit .8 version), once booted into clockworkmod there is a back up option which will back up all system files and apps.
Check this thread in the development section for installing clockworkmod:
[Sticky][Guide]Install ClockworkMod, A ROM, Flash Player, and the Market Fix
Insall clockwork mod .8 and boot to recovery and backup entire rom. ..then save a copy from internal to external sd card in case you need it.
Sent from my VEGAn-TAB-v1.0.0b5.1.1 using Tapatalk
personally (and I was in your shoes last week)
I would just go through the TNT Lite post and flash that ROM onto the tablet. If you go TNT 4.4.0 you DO NOT WANT CLOCKWORK.
It's really simple - plug in USB, copy the correct files to the tablet, push and hold pwr-volume up and give it a couple minutes.
I think the vanilla ROM is floating around so if you don't have a bunch of personalized files, I wouldn't worry too much about it. Anytime you flash it, you are going to have to add some of the programs back in anyway.
Roebeets TnT build is super fast and super stable. You won't know what hit you when you turn it on the first time.
bnovak,
That's a good idea, but not everyone is ready, or has the expertise or even wants
to move up to a ROM.
I have two tablets and one is running the experimental next generation TwoTabX ROM
that is on hold waiting for VS to do something -- and the other most of the time is
pure stock (so I can test stuff and get OTA updates etc.
When I go to work, doesn't matter which I take because both work well.
Stock is not bad!!! You should have seen the original software!!!
Rev
To put it simply when I boot up my vibrant, it switches to the galaxy s GT-19000 screen then fully boots into what seems like a completely different phone. My contacts were still there until I factory reset, but none of my apps or anything. I also believe that my calls and messaging do not work. I just recently rooted my phone but where things went bad is when I tried installing voodoo lagfix. I tried adding the link where I got the dl for voodoo lagfix but because I am a new user I can not add links, but i got it from the project voodoo website and it was the second link in their dl section, the one for froyo installable with clockworkmod recovery and rom manager. When I try and go into recovery mode ClockwordMod Recovery v2.5.1.3 - Voodoo lagfix is what comes up and is completely different from what the recovery was before. I just want to get rid of voodoo and get my phone back to how it was before. Im sorry for the terrible description, if there is anything else I need to add just let me know, but please, what can I do to fix my phone? any help would be greatly appreciated.
Can you get into download mode?
If so, ODIN to stock JFD.
you may need to use Vol Up + Power, unlike the normal way which is both volume buttons pressed in.
thank you! I used your guide in your sig, which was very helpful, phone is back to normal, however, all of my apps and what not are gone. I am an idiot and forgot to backup before I made changes, is there any other way that I can get back to the way my phone was before? And after going back to the stock JFD using odin, will I still have voodoo on my phone?
If you used titanium backup, your folder of backups should still be on your internal.
If you did not backup, sorry... hope you have them backed up.
No, you do not have voodoo now.
I did back up all of my app with titanium back up, so do I just have to re-dl titanium back up in the market and then just go from there?
^ Ti Backup needs root, so grab the update.zip from my guide and root (incredibly easy), move it to internal, go to stock recovery, install, reboot, you are rooted.
At this point, before you restore, you need to update to a more recent version of Android. you do NOT want to be stuck on JFD (2.1). I'd suggest a ROM like Trigger... crazy stable, faster and themed (I like it).
THEN you can restore your apps after downloading titanium backup (assuming you have them backed up on your internal already).
also, when I connect to my pc and look at my internal sd, the voodoo folder is still there
sorry Im a complete noob to this stuff
Sounds like somebodies got a lot of apps to download againlol. Now you'll remember to get TB and make a backup, heheh, but oh well its a learning experience really! If you have any apps that you paid forl at least gmail will remember that and you will see them as purchased, but unfortunately you'll still have to search for them individually.
cmrn89 said:
also, when I connect to my pc and look at my internal sd, the voodoo folder is still there
sorry Im a complete noob to this stuff
Click to expand...
Click to collapse
whats in it?
- prob just a bunch of logz(lol) just ignore it
^^ the voodoo folder is there b/c you did not format your card *no reason to*
when/if you flash trigger, it will convert you to EXT4 file system (voodoo). This IS okay and not a big deal. Not sure what site you went to, but I have 190% faith in the Trigger ROM and voodoo.. both have very talented people supporting it.
^ Paid apps do not need to be searched for. Look in My Apps, they are all there. He also apparently DID make a backup at some point so lets not go bashing the guy.
I do agree to backup often.
I don't think theyre on my internal anymore, I did a clear cache, factory reset when my phone was initially messed up and I think thats where my problem lies. and as for the rom, what are your thoughts on the TW bionix rom? I initially was trying to root and install this rom
kawika said:
whats in it?
- prob just a bunch of logz(lol) just ignore it
Click to expand...
Click to collapse
It is a bunch of logs, can I just delete this altogether?
Your call man. I made my suggestion for speed/stability/appearance. Don't delete the voodoo folder, even if you did, it will be there after you flash your rom.
- - No intent to flame just my bad humor, sorry.
cmrn89 said:
It is a bunch of logs, can I just delete this altogether?
Click to expand...
Click to collapse
You can do whatever you want with it if ur just gonna ODIN and re-flash. I just thought this was funny my bad. I wouldn't be too concerned with it really. Just leave it alone.
- If in fact you made a backup with TB and moved it to ur PC you could replace that back into the /sdcard/ and when you re-download TB just run the restore batch. BOOM! good to go. If not then oh well.
- The "myapps" will show you all your purchased ROMs so you will not need to research for them, just need to re-download them but any "free" apps will need to be researched and redownloaded.
- My friend has a Nexus S and she says that when she does an initial setup after flashing any ROM the gmail sync automatically downloads all her purchased apps. Thats what I was refering to cuz that would be friggin titz!
- Team Whiskey ROMs are proven and stable Bionix is a great choice to flash.
Good luck!
^ GB restores automatically, while good for some.. I hate it. Takes longer to download/install than restoring AND it doesn't restore the data (boo)
Hey guys. Recently rooted my DX2 that was on the latest 2.3.5 update and flashed Eclipse. I love it and its amazing but I want to try other ROMs that have much more custom options, etc. However, I was wondering what the best way to go about this is. I know how to make nandroid backups and have one with eclipse as well as one from right after i rooted.
what's the best way to switch between these without losing data etc?
Ok well the nandroid is good but all the other ROMs for the X2 are based on 2.3.4. You will need to sbf down and unfortunately there is no way around this. If you ever wanna come back to eclipse though just take the 2.3.5 ota, root and restore your backup. The same process can be done for the ROM's on 2.3.4. Install one, make a backup so if you ever want to come back to it you can just restore the nandroid. Use Titanium Backup to backup apps so you can just restore them on the other ROMs. Don't back up system data though because it will screw up other ROMs.
if i have a backup of stock rooted i can just boot into recovery and restore using the backup? also, is there an up to date guide on how to rename them.
as for the 2.3.4 ROM backups, i'd have to be on 2.3.4 in order to restore them?
Yea you can restore the stock rooted if you want. To rename them just use a file explorer or something similar and rename to whatever you want. Don't add spaces though or it will screw it up.
And yea you don't wan't to restore a backup of a different version of android. I don't know definitively that it will not work, but it's just a bad idea in general.
What gets erased when I apply an update? My backups are on my external sd card so they'll overwrite the internal correct?
Ive had my internal reserved for mostly just mp3s (and recently photography books and vids), and it still hasnt been erased through months of data wipes and sbfs.. App data can be backed up with titanium backup pro and batch restored. Google backs up contacts, wifi settings, wallpaper sometimes. If using a non stock launcher, your home screen setup and setting can be transfered btw roms. Its just system data and customizations that you need to do for the new rom and thats the fun part. I skipped some details of course but Android is a really efficient system.
Sent from my DROID X2 using xda app-developers app
thanks for the reply. it looks like the /system and /data folder are the ones that get overwritten so everything else stays untouched from what i can tell.
i tried restoring an old backup i made and got stuck at checkin_mot.db file.. pulled the battery, factory reset, restored latest eclipse backup. not sure what went wrong or if i just wasn't patient enough lol.
I had trouble with a cm7 backup freezing at the same spot..had to delete it. The cm9 backup i tried afterwards restored fine and pretty fast.
Sent from my DROID X2 using xda app-developers app
The biggest issue when coming from Eclipse, is the kernel. You cannot use a nandroid backup to switch between a 2.3.4 and a 2.3.5 rom. The nandroid cannot backup the kernel due to our ****ty locked bootloader.
So the only way you can go to another rom is to SBF back to 2.3.4 then root, and flash a new one. And even then a nandroid of Eclipse is worthless without it's kernel.
So no, there is no easier way. Other than to avoid eclipse like the plague, and stick with 2.3.4 roms.
Please let me know if I'm a complete retard here, but this has been my experience for the last year and a half.
Well before JB CM10 came out I'd say Eclipse was the most stable and best DD... Lol "avoiding it like the plague" is a bit overboard. But otherwise you are correct. To go to any other ROM it's time to SBF.
I definitely love the skin and feel of eclipse but I would like some more flexibility in terms of options, without overloading the overall device and making it sluggish again like stock.
Are any of the CM versions entirely stable and does everything work? Or they all have force close/non working parts?
Cm7 is pretty stable. The ones with the most bugs would be the CM9 based roms. CM10 JB is incredibly stable for the most part. You would never know it is an alpha. It runs very smoothly. There are problems installing some apps from gplay until alpha 2 is released but if you have titanium backups of your apps you can restore most if not all of them. It's only a work around but its good for now. I'm using CM10 as my daily driver (came from Eclipse.)
GoClifGo05 said:
Cm7 is pretty stable. The ones with the most bugs would be the CM9 based roms. CM10 JB is incredibly stable for the most part. You would never know it is an alpha. It runs very smoothly. There are problems installing some apps from gplay until alpha 2 is released but if you have titanium backups of your apps you can restore most if not all of them. It's only a work around but its good for now. I'm using CM10 as my daily driver (came from Eclipse.)
Click to expand...
Click to collapse
that sounds promising. is it specific to the x2 in regards to the soft buttons? (as we already have hard buttons and the baked in ones dont really make sense)