Hello to everyone. I tried to install CyanogenMod for Telechips firmware to my Crypto Passepartout 70 R84, but wifi, hdmi, network, sd and some other things are not working. I did make a backup before flashing but when I tried to restore it, I realise that it was corrupted.
Specifications: Crypto Passepartout 70 R84
Code:
Processor: Telechips [email protected]
Memory: 256 DDR2 RAM & 4GB built-in NAND flash
Oper. System: Android 2.3
Camera: Built-in Front Camera 0.3M
Can please soneone tell me where can I find a working firmware for this tablet, or can someone dump the factory ROM.
Thank you in advance.
Please, anyone
Related
The Device: msm7627_ffa (I'm a little confused here because on 'Android System Info' it says the Device is msm7627_ffa, but the model is msm7227_ffa)
Name: No name
Technical Specification
CPU: Qualcomm MSM7227/7627? 800GHz
RAM: 406MB
NAND: 239MB
Internal SD card: 4GB
480x800
I have the OEM ROM, but I can't post link.
Micro USB, MicroSD card slot, 3.5mm audio output, DC jack, Sim Card slot
internal Modem: 3G/2G(HSPA/WCDMA/EDGE/GPRS/GSM) GSM 900/1800
GPS: I dont know
WiFi(802.11b/g/n)
Software
OS: Android 2.2.2
Build: I700T_P6__T06_NEXX_FT4_R_0_02_1010_110803
Kernel: 2.6.32.9-perf
Here is a link to my post on tipstir with pics .
I cannot post link . Send me a message if you want the link.
A guy there has same tablet as me, but he has a newer ROM build. He can make phone calls and use EDGE, not just 3G.
I'd like to know if anyone can help extract his ROM.
Thanks
I have a similar problem
ok
i have a similar problem
please help me
My tablet does not boot and will stop at a black screen
What should I do?
hello all,
my friend have Stouch 747-BT tablet that dosent have any firmware or rom,
when turn on device it start with CWM-Based Recovery v6.0.2.8
what should i do? can i install other device rom on this?
here is the device spec:
S TOUCH TABLET PC
MODEL: 747-BT
3G INTERNAL SUPPORTED
7 INCH MULTI TOUCH SCREEN
DUEL CAMERA
ANROID :4.0
CORTEX A9-.5 GHZ
512 RAM
4 GB INTERNEL MEMORY
SIM CARD SLOT
EXTERNAL MEMORY CARD SLOT
BLUETOOTH
WIFI
3D GAMES AND VIDEO SUPPORTED
HD 1080P SUPPORTED
COMPLETE BOX WITH 3D GLASES
Thanks.
Hello There. I Do I need a GPS firmware anroid Peiying py-gps5008. I played with him and I broke down. I wrote another image "fast jb" but touch screen does not work and does not connect to pc so I can do something. just go to write another image. A13 has allwinner chip Cortex A8 processor, 512MB RAM 4GB internal memory nand, fm transmitter, wifi and touch screen is ilead gsl1680 motherboard is called A311, v1.0
Hello!
First of all I'm Polish so don't be rude if i say something bad in English. I will use some help of dictionary.
I will tell you little story about my tablet. Almost year ago my brother tried to play Dead Space on it, but the game didnt work. He read that he must install an app to play it, so he installed an app called ChainFire3D. After install tablet just wanted to reboot. When turned off it tried to turn on, but came to state that is today. The tablet freeze at boot logo of the firm that it is.
I can access to recovery. I tried:
-wipe all
-apply update from sideload ( it checking file, sending it to tablet and then stop at 73% with error "* failed to write data 'protocol fault (no status)' *")
-apply update from external storage( it says install complete in 1 sec and do nothing)
So if u can help me i will be really thankful and compensate all hours that i spent on trying to repair this tablet.
Specs:
Tablet O'Lofer C744
Display: 7" (800x600 pixel, 16:9)
Multi-touch :5 points
Chip(CPU) RockChips Rk2926(Cortex A9) 1,2Ghz
OS:Android 4.1
RAM Memory 512MB DDR3
Flash Memory: Internal 4GB
MicroSD Slot : Up to 16GB
Interfaces:
mini USB
Audio:Internal speaker and microphone
3G:Supports 3G USB Modems
Wifi: 802.11 b/g/n
Camera:Internal Front Camera 0.3 Mpx
I just maked my tablet go into download mode. Now i recovered image firmware from GoClever r70, but its bad.
So please help me find correct firmware to my O'Lofer C744.
Please what system android 9 work for this device
YOKATV KB2 PRO 3GB DDR4 RAM und 32GB eMMC
Amlogic S912 Octa-Core CPU 64
thank you all
trial and error with s912 roms, you should be able to flash most s912 firmwares, see what works for you, and learn about "Mask Rom Mode" this will make your device be detected by USB Burn tool incase you brick it