BSoD now stuck at splash screen - HTC EVO 3D

So I searched and found a solution but I'm not exactly sure how to perform it. I'm not a complete noob but I am not very familiar with adb and using the cmd window.
The problem that I have is I tried to flash the stock kernel with the GUI app because I was experiencing a lot of random reboots with the kernel that I was using. After flashing the kernel I chose to reboot the phone and it gave me the black screen of death. I can reboot into hboot, so I did. I wiped everything multiple times and tried reflashing roms and kernels to no avail. I've only managed to get the phone to hang on the splash screen now.
This thread shows how others have resolved the issue but I need more specific instructions on how to use the commands.
Help! Stuck at boot loop evo 3d
I've been trying to troubleshoot this since 2am and it's 6:30 now. Thanks in advance.

gators2kt said:
So I searched and found a solution but I'm not exactly sure how to perform it. I'm not a complete noob but I am not very familiar with adb and using the cmd window.
The problem that I have is I tried to flash the stock kernel with the GUI app because I was experiencing a lot of random reboots with the kernel that I was using. After flashing the kernel I chose to reboot the phone and it gave me the black screen of death. I can reboot into hboot, so I did. I wiped everything multiple times and tried reflashing roms and kernels to no avail. I've only managed to get the phone to hang on the splash screen now.
This thread shows how others have resolved the issue but I need more specific instructions on how to use the commands.
Help! Stuck at boot loop evo 3d
I've been trying to troubleshoot this since 2am and it's 6:30 now. Thanks in advance.
Click to expand...
Click to collapse
Belongs in Q&A...
Edit: Have you tried flashing in recovery. If that didn't work try a different kernel. If that doesn't work then I would suggest trying a different ROM all 0together....though I doubt it's the ROM causing your issue. What ROM is it BTW?

I tried flashing in recovery by holding the vol down button while powering on the phone. I flashed 2 different roms and 3 different kernels and none of those worked. I am using the Infected Eternity rom and it ran perfect until I changed kernels... I switched to the anthrax a couple of weeks ago and it kept randomly rebooting. So I flashed the stock kernel and then this happened. In the other thread, the users were saying that flashing worked when you access fastboot through the command window. I don't know how to do that though.

Wait are you on hboot1.50? If so the flashing instructions are in the Eternity thread on how to do that. If not then you can still refer to that same post for how to get into fastboot. I think it's "adb reboot fastboot" but I'm not 100% sure. Just go there and look in the hboot 1.50 flash instructions. That should get you where need to be. Let us know if it works.
Edit: It should be in the first few post if I'm not mistaken. Check posts 1-3.

gators2kt said:
So I searched and found a solution but I'm not exactly sure how to perform it. I'm not a complete noob but I am not very familiar with adb and using the cmd window.
The problem that I have is I tried to flash the stock kernel with the GUI app because I was experiencing a lot of random reboots with the kernel that I was using. After flashing the kernel I chose to reboot the phone and it gave me the black screen of death. I can reboot into hboot, so I did. I wiped everything multiple times and tried reflashing roms and kernels to no avail. I've only managed to get the phone to hang on the splash screen now.
This thread shows how others have resolved the issue but I need more specific instructions on how to use the commands.
Help! Stuck at boot loop evo 3d
I've been trying to troubleshoot this since 2am and it's 6:30 now. Thanks in advance.
Click to expand...
Click to collapse
From what you are experiencing , i m guessing you are on hboot 1.50.
Now follow the below steps:
Download this =====> http://downloadandroidrom.com/file/HTCEvo3D/rooting/rootevo3dnew.zip
Download any ROM or use any ROM that you have.
Download a superwipe tool ( or you can manually wipe everything from recovery).
>extract the "rootevo3dnew.zip" you downloaded above in "C:\" drive.(So it should be like "c:\rootevo3dnew\*.* ")
> install "HTCDriver3.0.0.007.exe" from it.
> open the ROM.zip (that you want to flash) with winRAR/7z and copy the boot.img from it to the rootevo3dnew folder.
> open cmd prompt ( press the key between "alt and fn" and press "r" then type cmd and hit enter)
> navigate to fastboot folder ( command : "cd c:\rootevo3dnew")
> boot phone in bootloader
> select fastboot
> connect to PC (phone should say fastboot-usb)
> type command "fastboot flash boot boot.img"
> now type "fastboot boot cwm-4.0.1.4-shooter.img"
> Phone should boot into recovery ( make sure the red LED is lit up)
> now flash the superwipe tool.zip(or wipe everything manually from wipe menu in recovery)
> and then flash the same ROM from which you pulled the boot.img.......
Hope this helps...........

Awesome! Thank you very much. Now I just need to restore my phone and everything else on it. Again, thank you.

its all ok!
My friend. Hopefully, I can help you. First off, download the android sdk from here:
http://developer.android.com/sdk/index.html
While that is downloading, on your laptop or pc, locate the ROM you are trying to flash and drag it to the desktop. Should be a zip file. From there double click the rom and you should see a file named "boot.img." Drag it onto the desktop.
OK, back to our download, open it up and extract it to the desktop as well.
Boot into fastboot on your device. Then, hook it up to a USB cable and you should see "fastboot usb" from there put your phone down.
Open a command prompt on your computer and type:
cd Desktop( hit enter)
fastboot flash boot boot.img(enter) it should reflash your boot partition. Let it do its thing and when completed boot into recovery. Flash the ROM that you extracted the boot image from. Bada Bang.
If this doesnt help you, PM me.

Thank you jsufx. I already fixed it thanks to mnomaanw. Phone is back to normal and I'm just going to stick with the stock kernel for now.

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A

Related

[GUIDE]Fix for Boot Freeze!

Hello! Sorry for posting this here, Idk if this is the right area for this kind of thing but anyways lets get started!!
Im sorry if this had already been posted, I have searched the forums before to see If someone had found a solution while I was having the error!
This has happened to me so many times, I got frustrated, then I tried this out of the blue and it seemed to work..
Some examples of ROMS that froze on boot on my HTC EVO 3D HBOOT 1.5
All Infected ROMS
MIUI
Synergy
Senseless ROM
CleanRom
and some others..
These are the steps I took to fix the issue!
1. Flash ROM and see if it freezes on boot, if it does start below
2. After flashing rom and confirming that it does freeze.. Boot into bootloader (Power+volume down key) and press the power button while highlighted over fastboot.
3. Plug in your device into PC or MAC
4. Make sure you have the latest android SDK, im pretty sure you do if you have been flashing roms!
5. EXTRACT the .zip file of the ROM that you are using that freezes.
6. Open the folder and copy the boot.img from that ROM
7. Paste that .img into the folder that has your adb and fastboot files for the Android SDK!
8. in terminal navigate to that folder, and do the following commands
PC:
Code:
fastboot flash boot boot.img
Ive done it on the PC and most of the time I have issues.. like failing of transferring over of the boot.img.. So far I don't know a way around this besides to keep trying!!
MAC:
Code:
./fastboot flash boot boot.img
Ive done it on my mac as well, and so far I have had no errors! It works everytime.
9. After that reboot your phone..
10. Watch in awe as your phone should reboot and not freeze!
Thank you for reading this!!
~Bairdog35
Yea that happened to me when I flashed miui. I reflashed the whole rom in fastboot. This should be a lot faster thanks!
Sent from my PG86100 using XDA App

[GUIDE]How to get past boot screen freezing!

Hello! Sorry for posting this here, Idk if this is the right area for this kind of thing but anyways lets get started!!
Im sorry if this had already been posted, I have searched the forums before to see If someone had found a solution while I was having the error!
Sorry for this, but I posted this already here: http://forum.xda-developers.com/showthread.php?t=1370478 So moderators will you please delete the above post! Thanks so much!
This has happened to me so many times, I got frustrated, then I tried this out of the blue and it seemed to work..
Some examples of ROMS that froze on boot on my HTC EVO 3D HBOOT 1.5
All Infected ROMS
MIUI
Synergy
Senseless ROM
CleanRom
and some others..
These are the steps I took to fix the issue!
1. Flash ROM and see if it freezes on boot, if it does start below
2. After flashing rom and confirming that it does freeze.. Boot into bootloader (Power+volume down key) and press the power button while highlighted over fastboot.
3. Plug in your device into PC or MAC
4. Make sure you have the latest android SDK, im pretty sure you do if you have been flashing roms!
5. EXTRACT the .zip file of the ROM that you are using that freezes.
6. Open the folder and copy the boot.img from that ROM
7. Paste that .img into the folder that has your adb and fastboot files for the Android SDK!
8. in terminal navigate to that folder, and do the following commands
PC:
Code:
fastboot flash boot boot.img
Ive done it on the PC and most of the time I have issues.. like failing of transferring over of the boot.img.. So far I don't know a way around this besides to keep trying!!
MAC:
Code:
./fastboot flash boot boot.img
Ive done it on my mac as well, and so far I have had no errors! It works everytime.
9. After that reboot your phone..
10. Watch in awe as your phone should reboot and not freeze!
Thank you for reading this!!
~Bairdog35
Bairdog35 said:
Hello! Sorry for posting this here, Idk if this is the right area for this kind of thing but anyways lets get started!!
Im sorry if this had already been posted, I have searched the forums before to see If someone had found a solution while I was having the error!
Sorry for this, but I posted this already here: http://forum.xda-developers.com/showthread.php?t=1370478 So moderators will you please delete the above post! Thanks so much!
This has happened to me so many times, I got frustrated, then I tried this out of the blue and it seemed to work..
Some examples of ROMS that froze on boot on my HTC EVO 3D HBOOT 1.5
All Infected ROMS
MIUI
Synergy
Senseless ROM
CleanRom
and some others..
These are the steps I took to fix the issue!
1. Flash ROM and see if it freezes on boot, if it does start below
2. After flashing rom and confirming that it does freeze.. Boot into bootloader (Power+volume down key) and press the power button while highlighted over fastboot.
3. Plug in your device into PC or MAC
4. Make sure you have the latest android SDK, im pretty sure you do if you have been flashing roms!
5. EXTRACT the .zip file of the ROM that you are using that freezes.
6. Open the folder and copy the boot.img from that ROM
7. Paste that .img into the folder that has your adb and fastboot files for the Android SDK!
8. in terminal navigate to that folder, and do the following commands
PC:
Code:
fastboot flash boot boot.img
Ive done it on the PC and most of the time I have issues.. like failing of transferring over of the boot.img.. So far I don't know a way around this besides to keep trying!!
MAC:
Code:
./fastboot flash boot boot.img
Ive done it on my mac as well, and so far I have had no errors! It works everytime.
9. After that reboot your phone..
10. Watch in awe as your phone should reboot and not freeze!
Thank you for reading this!!
~Bairdog35
Click to expand...
Click to collapse
Your problem lies in your HBOOT 1.5.... you need to flash the kernel separately, either the way you described it, or I think theres an app called FlashGUI
or just access recovery from fastboot & flash like normal.
This should be moved
Lulz. 10 char.
Sent from my PG86100 using xda premium
SketchyStunts said:
or just access recovery from fastboot & flash like normal.
This should be moved
Click to expand...
Click to collapse
This.
Maybe OP doesn't know about it so I'll guide him.
OP, we appreciate you trying to help but if you follow the steps below you should have no problem.
1. Download the Rom you want and place it on your sd card.
2. Plug your phone in to your computer and open a cmd file where 'adb' is located and type "adb reboot bootloader".
3. Your phone will now restart and boot into bootloader. Now type in "fastboot boot recovery.img". Your phone will now boot into your recovery.
(At this point, you can unplug your phone.)
4. Use the recovery as how you normally would and wipe/flash, etc.
Enjoy.
arozer said:
This.
Maybe OP doesn't know about it so I'll guide him.
OP, we appreciate you trying to help but if you follow the steps below you should have no problem.
1. Download the Rom you want and place it on your sd card.
2. Plug your phone in to your computer and open a cmd file where 'adb' is located and type "adb reboot bootloader".
3. Your phone will now restart and boot into bootloader. Now type in "fastboot boot recovery.img". Your phone will now boot into your recovery.
(At this point, you can unplug your phone.)
4. Use the recovery as how you normally would and wipe/flash, etc.
Enjoy.
Click to expand...
Click to collapse
Yes I do this, and I still have to do what I provided up above. Idk what is wrong with my phone.
Your recovery can't flash kernels. Hence the boot loop.
There is a program in the evo3d theme and apps forum for us 1.5 boot loader users to flash the kernel using an app in android then you reboot to recovery and flash rom.
The app is called flash image GUI
http://forum.xda-developers.com/showthread.php?t=1192527
[APP] Flash Image GUI - Flash Kernels and Recoveries from normal Android mode!
Sent from my PG86100 using xda premium
shadowmike said:
Your recovery can't flash kernels. Hence the boot loop.
There is a program in the evo3d theme and apps forum for us 1.5 boot loader users to flash the kernel using an app in android then you reboot to recovery and flash rom.
The app is called flash image GUI
http://forum.xda-developers.com/showthread.php?t=1192527
[APP] Flash Image GUI - Flash Kernels and Recoveries from normal Android mode!
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
If you use that app and flash the boot.img from the rom and then go into recovery and flash the rom it should work
Sent from my HTC Evo 3D using XDA App
bairdog35 said:
hello! Sorry for posting this here, idk if this is the right area for this kind of thing but anyways lets get started!!
Im sorry if this had already been posted, i have searched the forums before to see if someone had found a solution while i was having the error!
Sorry for this, but i posted this already here: http://forum.xda-developers.com/showthread.php?t=1370478 so moderators will you please delete the above post! Thanks so much!
this has happened to me so many times, i got frustrated, then i tried this out of the blue and it seemed to work..
Some examples of roms that froze on boot on my htc evo 3d hboot 1.5
all infected roms
miui
synergy
senseless rom
cleanrom
and some others..
these are the steps i took to fix the issue!
1. Flash rom and see if it freezes on boot, if it does start below
2. After flashing rom and confirming that it does freeze.. Boot into bootloader (power+volume down key) and press the power button while highlighted over fastboot.
3. Plug in your device into pc or mac
4. Make sure you have the latest android sdk, im pretty sure you do if you have been flashing roms!
5. Extract the .zip file of the rom that you are using that freezes.
6. Open the folder and copy the boot.img from that rom
7. Paste that .img into the folder that has your adb and fastboot files for the android sdk!
8. In terminal navigate to that folder, and do the following commands
pc:
Code:
fastboot flash boot boot.img
ive done it on the pc and most of the time i have issues.. Like failing of transferring over of the boot.img.. So far i don't know a way around this besides to keep trying!!
mac:
Code:
./fastboot flash boot boot.img
ive done it on my mac as well, and so far i have had no errors! It works everytime.
9. After that reboot your phone..
10. Watch in awe as your phone should reboot and not freeze!
Thank you for reading this!!
~bairdog35
Click to expand...
Click to collapse
this worked for me it was hanging at the htc white logo screen did this steps and the phone passed the first boot logo and it turned on fine!!!
That's due to not flashin a kernel right or you skipped a part of the wipe.
Virus has this guide for flashing the kernel on his page
The problem with using this "Flash Image GUI" is the FACT that if an individual can't boot a ROM, they obviously can't run the apk.
Individuals with HBOOT 1.5 have two choices in this situation (bootloop)...
Either
1. "adb reboot bootloader" after which you run "fastboot boot recovery.img" (recovery.img must be placed in fastboot directory), then you flash the ROM/kernel in question...
Or
2. Flash boot.img through fastboot (which is what the above "should" do in the fist place).
BTW: If you always have a problem with bootloops, you aren't loading recovery the way you should...
You can either run the commands mentioned earlier in this post, or go to
forum.xda-developers.com/showthread.pho?t=1403148
and download the batch in the second post "jthein1989_batch.zip" (you will still need to download and copy the recovery.img to the folder).
Just download twrp or clockwork and copy it as "recovery.img" to the directory that you unzipped the batch to... Then, just follow the OP of my thread...
Sent from my PG86100 using XDA App
Maybe I'm a noob,
But you mean you can't select Recorery from Hboot menu? Even if you installed twrp? I don't know much of what I'm doing only had 3d for week. but its locks up at white HTC screen all the time.
Or you could try...
Fastboot boot my kernel or ill kill you.img
Sent from my HTC EVO 3D using xda premium
jcfunk said:
Maybe I'm a noob,
But you mean you can't select Recorery from Hboot menu? Even if you installed twrp? I don't know much of what I'm doing only had 3d for week. but its locks up at white HTC screen all the time.
Click to expand...
Click to collapse
With HBOOT 1.5 you "can" start recovery without ABD, but "S-ON" will not allow you to properly flash to the BOOT partition (limitation of the HTC unlock method). Therefore, users with HBOOT 1.5 need to go to extra lengths to flash the BOOT partition.
Sent from my PG86100 using XDA App
Having HBOOT 1.5, I've ran into this very problem. I'm not sure if it's hardware or what, but my phone will not run any Sense 3.5 ROM's I've tried. The phone just won't boot! I gave up trying 3.5 ROM's. I used ABD to put a 3.0 kernel back on and restore the recovery and everything is fine again. This will probably be my last HTC phone. Hoping something better besides the S2 is coming soon.

Bootloop please help.

*Fixed*
uppon2 said:
I just go the phone today and I have unlocked it and it all went well. I was looking at installing ViperDNA on to my phone. So I started to follow instructions in the Viper thread
1. I "tried" to install TWRP through the Goo method and after downloading the file it told me that recovery was no installed.
2. I rebooted in to bootloader and hit power button to enter fastboot then I scrolled down to where it says recovery and I hit power again. Phone displayed a message up the top that it was now entering recovery. The phone did not go to recovery it simply rebooted all the way back to my phones home screen.
I then though hmm well maybe I didn't install it properly so I follwed the instructions using Goo again but still nothing happened.
I noticed there was an alternative method to flash recovery by using ADB. I put the file in to the same directory as where my adb/fastbood reside and I booted in to fastboot again and in cmd prompt I entered "flash recovery openrecovery-twrp-2.4.0.0-dlx.img"
It seemed to flash and gave me a response which I can't remember now but it said OK!.
I then proceeded to try and enter recovery again but this time it has sent my phone in to a bootloop. It will not pass the Droid splashscreen. I can however still access bootloader mode.
I also noticed now in my Bootloader above where it says Unlocked it also says Tampered?
Phone doesn't seem to be recognised by ADB anymore neither. adb devices returns with a blank space
I'm a long time Samsung user so usually in this situation I would use Odin and flash a stock firmware but I don't know the process with HTC
I don't have a backup because I hadn't got to this stage yet!
Any advice as to what to do now
Click to expand...
Click to collapse
if you can still get the phone into fastboot mode then you should be fine.. when in fastboot mode the command "adb devices" will not return any entries.. when in fastboot you should use the command
fastboot devices
and see if your phone shows up there.. also the command for flashing a recovery in fastboot is:
fastboot flash recovery "your recovery filename.img" without the quotations though..
so the exact command would be the fastboot flash recovery openrecovery-twrp-2.4.0.0-dlx.img if that is what the recovery file on your computer is named.
then hit enter it should say sending etc...
I always then do the command
fastboot reboot-bootloader then the phone will reboot into the fastboot screen, then manually select recovery and see that it worked that time.
lazarus2297 said:
if you can still get the phone into fastboot mode then you should be fine.. when in fastboot mode the command "adb devices" will not return any entries.. when in fastboot you should use the command
fastboot devices
and see if your phone shows up there.. also the command for flashing a recovery in fastboot is:
fastboot flash recovery "your recovery filename.img" without the quotations though..
so the exact command would be the fastboot flash recovery openrecovery-twrp-2.4.0.0-dlx.img if that is what the recovery file on your computer is named.
then hit enter it should say sending etc...
I always then do the command
fastboot reboot-bootloader then the phone will reboot into the fastboot screen, then manually select recovery and see that it worked that time.
Click to expand...
Click to collapse
After attempting this it hangs here:
C:\Android-adb>fastboot flash recovery openrecovery-twrp-2.4.0.0-dlx.img
< waiting for device >
EDIT* Rookie mistake for it hanging. I was only in bootloader not Fastboot. However, this worked and I love you. I will now flash Viper. Do I still need to flash the Kernel Modules?
uppon2 said:
After attempting this it hangs here:
C:\Android-adb>fastboot flash recovery openrecovery-twrp-2.4.0.0-dlx.img
< waiting for device >
EDIT* Rookie mistake for it hanging. I was only in bootloader not Fastboot. However, this worked and I love you. I will now flash Viper. Do I still need to flash the Kernel Modules?
Click to expand...
Click to collapse
flashing the modules for the kernel is always a good idea just flash that after you flash your ROM..
and you are welcome just glad I could help!!
lazarus2297 said:
flashing the modules for the kernel is always a good idea just flash that after you flash your ROM..
and you are welcome just glad I could help!!
Click to expand...
Click to collapse
lol. Now Aroma is being a pain in the ass. It won't let me click Next to install. haha
EDIT* Maybe because of the smaller TWRP or maybe not but I had to try again and then click next but about 2" higher than where it says it :S
I am not a huge fan of aroma... i had issues when i tried to flash my DNA the first time.. that is something that you just have to keep trying unfortunately it seems... i have seen where people had to aroma freeze on them multiple times before finally completing the flash... some tips i have seen is keep the phone flat... also keep it plugged in.. I can't vouch for any of these being actual fixes but hey "it's only weird if it doesn't work"
Do you know the load time on a ROMs first boot after flash?
The ROM said it was installing and at about 8% the screen went all grey and then rebooted in to the HTC splash screen and hasn't changed for about 15 minutes. Tried it twice
EDIT* Would only flash using CWM
uppon2 said:
Do you know the load time on a ROMs first boot after flash?
The ROM said it was installing and at about 8% the screen went all grey and then rebooted in to the HTC splash screen and hasn't changed for about 15 minutes. Tried it twice
EDIT* Would only flash using CWM
Click to expand...
Click to collapse
glad to hear it sorry for the slow response.. i was away for a bit..
lazarus2297 said:
glad to hear it sorry for the slow response.. i was away for a bit..
Click to expand...
Click to collapse
All good. Thanks for your assistance
I am usually the guy helping other people. It's quite an unusual change going from Samsung to HTC!

Boot loop problem! Please help!

I'm pretty inexperienced with rooting.. I think I may have messed my brother's phone up. I rooted his rezound and got cwm recovery working. I tried to flash a "TACHYON-1.2.zip" rom I found here and now it won't boot past the white background with green htc screen when I try to boot the phone. Please help me try to fix this! I can still boot into cwm recovery.
[EDIT] When I wipe data/factory rest it says error mounting /sdcard/.android_secure!
This was probably a mistake but I'm freaking out. I put CleanROM Standard 4.5.zip from here https://www.copy.com/s/uYOSaNCntCvx/CleanROM on another sd card and installed it after tying to wipe again. Now it boots past the htc screen and the CleanROM screen boots for a minute, then sticks..
Cap'n Jazz said:
I'm pretty inexperienced with rooting.. I think I may have messed my brother's phone up. I rooted his rezound and got cwm recovery working. I tried to flash a "TACHYON-1.2.zip" rom I found here and now it won't boot past the white background with green htc screen when I try to boot the phone. Please help me try to fix this! I can still boot into cwm recovery.
[EDIT] When I wipe data/factory rest it says error mounting /sdcard/.android_secure!
This was probably a mistake but I'm freaking out. I put CleanROM Standard 4.5.zip from here https://www.copy.com/s/uYOSaNCntCvx/CleanROM on another sd card and installed it after tying to wipe again. Now it boots past the htc screen and the CleanROM screen boots for a minute, then sticks..
Click to expand...
Click to collapse
You need to extract and flash the boot.img file from the ROM zip separately via fastboot. Extract the file and place it in an easy to access place on the drive (like same place as fastboot/adb) , then after flashing the ROM reboot into hboot and start fastboot, and use:
fastboot flash boot boot.img
Then reboot and be patient, sometimes the first boot seems to take forever.
Sent from my Nexus 4 using Tapatalk
acejavelin said:
You need to extract and flash the boot.img file from the ROM zip separately via fastboot. Extract the file and place it in an easy to access place on the drive (like same place as fastboot/adb) , then after flashing the ROM reboot into hboot and start fastboot, and use:
fastboot flash boot boot.img
Then reboot and be patient, sometimes the first boot seems to take forever.
Click to expand...
Click to collapse
Thank you for the reply, and sorry if I ask too many questions, but how exactly do I flash the boot.img file? In CMD? There isn't a flash option in my fastboot section of the phone, just BOOTLOADER, REBOOT, REBOOT BOOTLOADER and POWER DOWN.
http://img854.imageshack.us/img854/6248/ismh.png
This is how far I got in cmd if I'm headed in the right direction at all..
Cap'n Jazz said:
Thank you for the reply, and sorry if I ask too many questions, but how exactly do I flash the boot.img file? In CMD? There isn't a flash option in my fastboot section of the phone, just BOOTLOADER, REBOOT, REBOOT BOOTLOADER and POWER DOWN.
This is how far I got in cmd if I'm headed in the right direction at all..
Click to expand...
Click to collapse
You start fastboot in the phone, that puts it in a mode to enter fastboot commands from a PC... You Don't do anything in the phone in fastboot, you use the fastboot command that is part of the ADB package. The same way you would have unlocked the phone on HTCdev.com to allow root or CWM to be installed.
Sent from my Nexus 4 using Tapatalk
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom.
mjones73 said:
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom.
Click to expand...
Click to collapse
Thank both of you so much! I'm sorry I had to have you completely spell it out for me, but I appreciate the help and this forum in general so much!
I hate to bring this thread back, but it's the best place to ask about my problem. I'm trying to switch from Clean Rom on an HTC Rezound to Venasaur Rom v3.2.0 because I read that it will work with a Straight Talk sim. I tried installing with ClockWork and I get the new rom's boot screen, but it won't boot past that. I don't know what I'm doing wrong. I would really appreciate it if somebody could help me out again!
Did you flash the boot.img this time? I would suggest after you get booted, trying rumrunner to go S-off... It saves sooo much time... I'm always switching between multiple ROMs because I'm s-off....
Sent from my HTC EVO 4G Running AOKP 4.2.2
Cap'n Jazz said:
I hate to bring this thread back, but it's the best place to ask about my problem. I'm trying to switch from Clean Rom on an HTC Rezound to Venasaur Rom v3.2.0 because I read that it will work with a Straight Talk sim. I tried installing with ClockWork and I get the new rom's boot screen, but it won't boot past that. I don't know what I'm doing wrong. I would really appreciate it if somebody could help me out again!
Click to expand...
Click to collapse
... you should remember one thing for sure. Because you are s-on whenever you flash any custom rom, you have to flash its corresponding boot.img file in fastboot separately otherwise you are gonna get bootloop ...
---------- Post added at 11:50 AM ---------- Previous post was at 11:49 AM ----------
... and yeah. you should try to get s-off as you are already been suggested above ...

[Q] No android-info.txt & android-product.txt ~I Need Help~

Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
also to note....you dont have to install linux to get s-off....if you follow my guide you can do it straight from a live disk rather than installing it....so it wont erase or mess up your windows partition at all
Solved!
Thank you, Mjones, I finally got it! I knew it was much easier than I was making it out to be. I was missing the kernel! Yeah, a crucial part in the process, I know
I first ran CWM and flashed the ROM over and ran the .zip through recovery (which I couldn't understand at first as I could never find it in the directory) but the installer would only go 50% and would fail... makes sense why now lol
I later flashed TWRP and backed up again after recovering from the fail. I flashed over the kernel and voila! So simple... Had to slap myself.
Thanks again! Case solved.
REV3NT3CH, that is sweet!! I have been hoping there is a way to gain s-off with Windows. I have 7 at work and 8.1 (which I can't get anything to work on) at home. I actually have to focus on work today haha so I'll look into the method and try it out tomorrow if I can. Thanks for all of the help.
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
​
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Sorry, don't know anything about that phone.
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Did you try this first? (Right from Moto's site)
Perform a factory reset using external keys
1. Power off the phone, press and hold volume down button, press power button
2. Screen will come up with "Fastboot", press Vol down key to cycle through choices until you get "Android Recovery", then press Vol up key
3. Wait for the "triangle ! / Android" screen then go on to step 4
4. Press both Vol up and Vol down key simultaneously. A menu will come up
5. Tap on Vol down key until "wipe data/factory reset" is highlighted, and tap Power key. Another Confirmation screen will come. Tap on Vol down key until coming to Yes and tap Power key
6. After userdata is cleared, the "reboot system now" option will be highlighted by Default. Tap Power key
7. Phone will reboot to initial setup screen.
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
not working
hariom.gupta11 said:
​
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
Click to expand...
Click to collapse
not working on my 4c. write successful but when reboot is completed it goes to previous state.
"the user data partition can no longer be used"
zb602kl_x00tdb
L0RDZ3RO said:
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
Click to expand...
Click to collapse
I have same problem on asus zenfone max pro m1 I bought it online said used and now working
can't boot into recovery.
can't boot into system.
Only EDL Mode and Fastboot Mode, but fastboot is Locked whic I cant unlock because I cannot boot into system to toggle USB Debugging and allow OEM unlocking
Qualcomm is harder to flash than MTK that can use SP FlashTool.
on this I use QFIL but keeps "sahara error". I tried searching and try moving firmware file to bin but no Luck. I'm currently trying different version of QFIL Tool.
If it FAILS my only HOPE is to use MUT-QCfire which will Require a "SmartCardReader" Which is a bit pricey and I don't even know if it will work on my device.

Categories

Resources