Related
Arkas 0.4- Ganymede released
Removed almost all bugs .
Searching for some to patch.
Many new features .
Searching for more to add.
Check my Blog for details
Edit :- The PDA is fine but the KD1 amss_phone is not
Flash with any older amss_phone like JL1
Arkas 0.401 - Ganymede 2
http://galaxy551.wordpress.com/2011/07/24/arkas-0-401-ganymede-2/
Welcome to the new era !!
Installation Instructions :- http://androidforums.com/enigma/370845-n00b-rom-installation.html
Arkas 0.5 Dark Mercury
780 Mhz and more
http://galaxy551.wordpress.com/2011/07/25/0-5-dark-mercury-public-release/
Arkas 0.6 Dark Energon
................................
Gearloose ADB Manager
http://galaxy551.wordpress.com/gearloose/
Good Work people!. I flash it later. Cheers
EDIT: I have the i5510L phone. Don't flash the CSC or you will loss 3G. I loss the GPS with the KD4 FW but i saved the 3G.
kraka23 said:
Good Work people!. I flash it later. Cheers
EDIT: I have the i5510L phone. Don't flash the CSC or you will loss 3G. I loss the GPS with the KD4 FW but i saved the 3G.
Click to expand...
Click to collapse
Dont flash CSC,amss_phone .That way you could save your radio as well .!!!!
Yes!. I flash the phone. Sorry kara but the rom is still too green. In the first hour, the phone reboot one time and freez two times. It is more fast than the official KD4. Very smooth. Recently freez when i copying my music to the phone.Anyway...the phone run like forrest.I feel sorry return to the previous rom but the phone reboot and freez too much.
I hope new versions guys!. Tell me where i can help. Cheers.
OK .But you were too hasty to revert back . **** I wanted to run some tests .Do you have Set CPU .Change governor to Conservative that fixes the reboot cycle.
USB transfer has hitches you say .Hmm very interesting ,but it's a start and we need people to point out bugs .
How you can help : --
1.)Just use this ROM for four hours .
2.)Use SetCPU,Ti backup , and any other busybox based app together .
3.)Shut down the phone and check whether the screen switches off.
4.)Use Link2SD/dta2SD on ext4 partition of SD card
Ok!. I will use the rom more time in the name of justice!!!. Let me install the setcpu and test the "conservative" setting. Thank Kara!!
kraka23 said:
Ok!. I will use the rom more time in the name of justice!!!. Let me install the setcpu and test the "conservative" setting. Thank Kara!!
Click to expand...
Click to collapse
Well the more bugs we find ,the more will be patched . use the SEt CPU on boot to avoid further loops.
is it just me or does bluetooth not work?
semaj<3har said:
is it just me or does bluetooth not work?
Click to expand...
Click to collapse
Thank You for flashing our ROM and pointing the bug.Yes Bluetooth doesnt work,Just checked it .Appreciate your efforts.
I will not try it yet ! But i got to say thanks to put your work into this im sure i will use a stable version! Try making a tutorial on how to flash our phone! Once again
Tks a lot for the effort
yup. been using it for a day. many thanks.
aside from bluetooth, ive experienced d phone resetting itself after uninstalling a system app thru ti-b. didnt do that before the switch. the same thing goes when i do a group install using easy installer. you also hve to install setcpu first before running easy installer since the phone will hang and reset if you dont.
will give more updates once available.
Sent from my GT-I5510
sindamc said:
I will not try it yet ! But i got to say thanks to put your work into this im sure i will use a stable version! Try making a tutorial on how to flash our phone! Once again
Tks a lot for the effort
Click to expand...
Click to collapse
I specifically created it for people who know to use Odin.
I can post a tutorial but there are serious legal issues involved in publishing the tutorial without the permit of samsung.
Odin is used as Level 1 repair tool in samsung !!!
You can head to samfirmware.com and they have flash guide specifically for 551.
We cant make a stable version if dont know what makes this version unstable.
MajinkenSword said:
yup. been using it for a day. many thanks.
aside from bluetooth, ive experienced d phone resetting itself after uninstalling a system app thru ti-b. didnt do that before the switch. the same thing goes when i do a group install using easy installer. you also hve to install setcpu first before running easy installer since the phone will hang and reset if you dont.
will give more updates once available.
Sent from my GT-I5510
Click to expand...
Click to collapse
Thank you for using our ROM.
It will nice of you to mention which system app .
Does easy installer use busybox ?
-----
Double post
Im not sure if Easy Installer uses busybox, sorry.
On the other hand, system apps would include Market, Bookmark and Messaging apps. I normally remove TW and exchange it with ADW Launcher EX.
Hope we can resolve the bluetooth issue soon. Im still stress testing ur rom. Will upd8 1s I see more. I really like the 667 feature.
What freq did u uas default? It seems a little unstable imho.
Thanks again and regards.
Sent from my GT-I5510
MajinkenSword said:
Im not sure if Easy Installer uses busybox, sorry.
On the other hand, system apps would include Market, Bookmark and Messaging apps. I normally remove TW and exchange it with ADW Launcher EX.
Hope we can resolve the bluetooth issue soon. Im still stress testing ur rom. Will upd8 1s I see more. I really like the 667 feature.
What freq did u uas default? It seems a little unstable imho.
Thanks again and regards.
Sent from my GT-I5510
Click to expand...
Click to collapse
667 Mhz since three days . Never crashed and lets be honest .I have a standard 30 app test(I use only 30-40 apps regularly ).If those 30 apps work then the phone seems to work for me.I cant test all 100000 apps on the phone you know !!!
As a matter of fact I just uninstalled Twlauncher and Samsung apps .No hitch noticed !!!
Understood.
I wonder why mine occasionally resets when I perform those I mentioned earlier.
Overall, I'm happy and satisfied save for the bluetooth feature. Thanks again
Sent from my GT-I5510
MajinkenSword said:
Understood.
I wonder why mine occasionally resets when I perform those I mentioned earlier.
Overall, I'm happy and satisfied save for the bluetooth feature. Thanks again
Sent from my GT-I5510
Click to expand...
Click to collapse
I have a rough idea of what has happened.It is a serious bug ..WIll have to push the release of 0.4 forward .
I'll try to perform a data/cache wipe once I get home and redo my system app settings.
Will report as soon as possible.
Any one else having problems with Svox Classic on Resurrection Remix ics v9.6 exclusive XXLPH 4.0.3.
I cant seem to select it as the main voice, it keeps crashing, does any one know of any fix?
I would off added a comment on the site ( http://forum.xda-developers.com/showthread.php?t=1436854 )
but am new on here so it wont let me comment just yet.
Many Thanks
Jon
Just installed it. Running ok for me on Remix v9.6.
Sent from my GT-I9100 using Tapatalk
Have you tried reflashing the rom (back up first of course) it might fix it...
personally my GPS doesn't work with v9.6 resurrection... did you ever have that problem???
my map when i turn on GPS says GPS not found lol...
Caustic68 said:
Just installed it. Running ok for me on Remix v9.6.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
+1 for me
Sent from my GT-I9100 using XDA
remarks about remix 9.6
I use remix 9.6 but without doing the steps after the first rooting
I keep LPH original kernel
because the SD pb is not totally resolved
I you recovery the 3 programs after rooting,
you can use Titanium back up for restoring apps
but if you put apps on SD (now you can) they seem disappeared by the system
and you have to restore again with dismounting SD before
br46
CWM Touch version
Hello,
After flashing V9.6, all seems to be good for me. ROM + installation of LPH kernel.
Great job !
Does anybody know if there is a way to keep the touch version of CWM working when booting into recovery instead of its classic display ? as after flashing"LPH kernel+CWM" the phone comes back to the classic CWM display.
You need the CWM touch incorporated in the kernel obviously you have ovewritten that kernel .
jje
JJEgan said:
You need the CWM touch incorporated in the kernel obviously you have ovewritten that kernel .
jje
Click to expand...
Click to collapse
Thanks, you're right.
Turn off dial sound
Hi,
I finaly flash the Vertumus theme on V9.3.
I can't manage to turn off sound in the dialer (it's irrelevant for me) any idea ?
I found nothing in settings.
jivojivo said:
Hi,
I finaly flash the Vertumus theme on V9.3.
I can't manage to turn off sound in the dialer (it's irrelevant for me) any idea ?
I found nothing in settings.
Click to expand...
Click to collapse
With root explorer navigate to system/media/audio/ui, should be file dialler sound or something like that, delete it or rename
Ok, thanks !
mms apk
i have noticed that the mms.apk shows the timestamp for incoming messages as the time the phone received the message. is there a way of changing that to show the time that the message was sent through the network rather than when the phone received it?
like if my phone was out of service for a while, and regains service, all the messages that i would have received during the time of no service show the time that i had regained signal.
help would be appreciated
crt off still not working well
hey guys , i've been fla**** resurrection ics remix since v9.4 , i am now on v1.0 and the crt off animation is still not working well . is anyone having this problem?
thanks
Hey guys
anyone got VPN working on the S3 yet using the standard Android setup?
I configure it the same way I would for the S2 but all I get is "Unable to connect".... is there a way to get any further diagnostics? Its the same SIM/network, and I can put it back it in the S2 and its fine. I've checked the data/gateway settings and email etc are all fine.
anyone got VPN up and running?
I did using purevpn settings. What bothered me was it will only enable VPN if we put screen lock. I didn't face it on iphone or LG O3D.
http://www.purevpn.com/config/android_pptp/
Flashed it with a custom ROM, put the same settings in and .... it works. No idea what changed from the stock ROM but hey, its now working
Monty Burns said:
Flashed it with a custom ROM, put the same settings in and .... it works. No idea what changed from the stock ROM but hey, its now working
Click to expand...
Click to collapse
Do you use PPPTP or IPsec? I problem with IPsec, but no problem with PPPTP? Which rom do you mention here? OMEGA v3.0 right?
Hi
i've got an issue with flashing custom roms.
Ive gone from stock ICS to MIUI, and everything is fine and dandy. Then Ive tried to go from MIUI to Tweaky rom and mobile data/3g wouldn't work. Then restored MIUI and again everything was fine. When i flashed Neat rom - again mobile data would not work.
-Ive tried flashing different modems (XXLPS and XXLQ5)
-ive tried typing in the APN again
-ive tried flashing again and reflashing
-ive wiped ALL data
-ive tried restarting, booting etc
Nothing I do seems to work!
All other functions of the phone work - i can call, sms, WIFI, bluetooth. Its just mobile data....
Is there anything you suggest i try?
current info...
baseband - xxLPS
kernel - Siyah v3.4.1
phone - sgs2 GT-I9100
rom - MIUI 2.7.27
Thanks in advance!
duleim said:
Hi
i've got an issue with flashing custom roms.
Ive gone from stock ICS to MIUI, and everything is fine and dandy. Then Ive tried to go from MIUI to Tweaky rom and mobile data/3g wouldn't work. Then restored MIUI and again everything was fine. When i flashed Neat rom - again mobile data would not work.
-Ive tried flashing different modems (XXLPS and XXLQ5)
-ive tried typing in the APN again
-ive tried flashing again and reflashing
-ive wiped ALL data
-ive tried restarting, booting etc
Nothing I do seems to work!
All other functions of the phone work - i can call, sms, WIFI, bluetooth. Its just mobile data....
Is there anything you suggest i try?
current info...
baseband - xxLPS
kernel - Siyah v3.4.1
phone - sgs2 GT-I9100
rom - MIUI 2.7.27
Thanks in advance!
Click to expand...
Click to collapse
You tried restoring the default APN settings? That helps. If you type the correct settings in they won't stick if it is you don't restore the default settings.
Sent from my GT-I9100 using Tapatalk 2
thanks for the quick reply..
how do i restore to default APN settings?
edit - dw i've found the setting button. I'll give that a go and report back. But its weird that the current settings work with MIUI but not other roms!?
duleim said:
thanks for the quick reply..
how do i restore to default APN settings?
edit - dw i've found the setting button. I'll give that a go and report back. But its weird that the current settings work with MIUI but not other roms!?
Click to expand...
Click to collapse
Hello you have an app called Apn restore on Google play, i used on stock, aosp and miui roms.
austick said:
Hello you have an app called Apn restore on Google play, i used on stock, aosp and miui roms.
Click to expand...
Click to collapse
Thanks @austic. The info provided by you helped me fix the mobile internet not starting problem in my Micromax unite 2 custom ROM mystic os 6.!!!
Once again Thank you very very much!!
Please give link of the app bro...I tried some apps in play store but not working
My Sm G360H mobile data not working in
TW5.1.1 PORT!! PLZ FIX THAT
GAUTAM VERMA said:
My Sm G360H mobile data not working in
TW5.1.1 PORT!! PLZ FIX THAT
Click to expand...
Click to collapse
you can try this method:here or https://forum.xda-developers.com/p8lite/general/patch-mobile-data-fix-miui-roms-t3790289
tnkhai said:
you can try this method:here or https://forum.xda-developers.com/p8lite/general/patch-mobile-data-fix-miui-roms-t3790289
Click to expand...
Click to collapse
I already got fix for this.
GAUTAM VERMA said:
I already got fix for this.
Click to expand...
Click to collapse
Or may be fixed by modify kernel. sr for english
Guys guys guys I found a way flashed zip file from XDa for this problem then I edit my apn and port and proxy to none (I deleted all whatever written) an now it's just (not set) and save that settings !! Tadaaa!!! All done!!
Azbaan031 said:
Guys guys guys I found a way flashed zip file from XDa for this problem then I edit my apn and port and proxy to none (I deleted all whatever written) an now it's just (not set) and save that settings !! Tadaaa!!! All done!!
Click to expand...
Click to collapse
Could you pls elaborate that?
I fixed it by making a APN copied from another phone with the same network as mine.
So I have been running CM10 nightlies since they first came out for the I9100int.
Been loving them, they seem to work really well, however last night I started getting the error, "android keyboard (aosp) has stopped working"
Fortunately I have a second keyboard to use, but I was wondering if anyone else has had this error.
I cannot seem to find much about it anywhere, so I figured Ill ask the source.
I have cleared the keyboard cache, but that doesnt make any difference.
The last time this happened I had to do a full flash and I was hoping to avoid that.
even reverting to a backup hasnt seemed to fix it, so Im not sure if my backup had the issue too.
anyways, just thought Id throw this out there for any help.
Otherwise Id like to give a HUGE thanks to all the developers with this project, I love my S2 more and more with constant updates they provide.
Go into menu/system/apps and find android keyboard asop and CLEAR DATA Then do the same for Dictionary Provider and CLEAR DATA.
Sent from My SGH-I777 Running Red Reaper Rom
RockRatt said:
Go into menu/system/apps and find android keyboard asop and CLEAR DATA Then do the same for Dictionary Provider and CLEAR DATA.
Sent from My SGH-I777 Running Red Reaper Rom
Click to expand...
Click to collapse
SICK!!! thanks so much this worked perfectly..
T869
Awesome. Worked like a charm on my SGH-T869 running CyanogenMod Ver. 10-20121007--T869.
RockRatt said:
Go into menu/system/apps and find android keyboard asop and CLEAR DATA Then do the same for Dictionary Provider and CLEAR DATA.
Sent from My SGH-I777 Running Red Reaper Rom
Click to expand...
Click to collapse
On my Galaxy Note N7000 after an install of the current nightly CM10, some weeks later I get this message and the only way I can fix it is with a Factory Reset/wipe. This has happened a few times now. From the Settings app, I can get into System/Apps but there are no options like you mention above . .
It would be nice not to have to use the Factory Reset/wipe method . . is there a way of using your method on the N7000?
Thanks,
Phil.
cblock said:
SICK!!! thanks so much this worked perfectly..
Click to expand...
Click to collapse
I really can not find Dictionary Provider anywhere. Where is it??
Thanks in advance
RockRatt said:
Go into menu/system/apps and find android keyboard asop and CLEAR DATA Then do the same for Dictionary Provider and CLEAR DATA.
Sent from My SGH-I777 Running Red Reaper Rom
Click to expand...
Click to collapse
I have Sprint's S3 and when I flashed CM10 on it, I keep getting "android keyboard (aosp) has stopped working". I just flashed it so I don't have any other why to type or even get logged into the play store to download a new keyboard. Please help.
Subbu9 said:
I really can not find Dictionary Provider anywhere. Where is it??
Thanks in advance
Click to expand...
Click to collapse
I too cannot find "Dictionary Provider" anywhere. Any help would be appreciated. Thank you.
Galaxy Nexus
CM10
When you go setting/apps, make sure you swipe to the right so it says ALL at the top, not just downloaded, they're in there. I just had the same error hence my search here. Following the advice above worked for me on cyanogen mod
=deleted=
fozzy169 said:
When you go setting/apps, make sure you swipe to the right so it says ALL at the top, not just downloaded, they're in there. I just had the same error hence my search here. Following the advice above worked for me on cyanogen mod
Click to expand...
Click to collapse
Thanks for the reply fozzy --- I did a master reset/master clean and it fixed it all. Still can't see "Dictionary Provider" anywhere, incidentally...bizarre!
Appreciate it though. :good::good::good:
Woah, thanks!
Alright so I just got the CM10 update and I had the same error as you, and the fix worked well! Thanks c:
CommanderT1562 said:
Alright so I just got the CM10 update and I had the same error as you, and the fix worked well! Thanks c:
Click to expand...
Click to collapse
I can't see the dictionary app either. Anybody got any ideas why?
msimsie said:
I can't see the dictionary app either. Anybody got any ideas why?
Click to expand...
Click to collapse
Same problem here. I just flashed the Provision JB ROM and right away I can't use my keyboard at all. I cleared the data for the AOSP keyboard but I can't find the dictionary app.
same problem.. no dictionary provider. keyboards keeps on crashing (phone is Sk17i so bug is not related to phone itself)!
I've the same issue, even i can't type any letter !
I've cleared the data for Android keyboard ( from settings/apps.. ) , but it didn't work with me!
Also i can't find Directory provider in apps.
So, what to do?
I use SGT-P3100.
BRGRDS
I solved it by using gapps-jb-20120726-signed.zip
I faced the same issue yesterday when I installed cm10. I have xperia mini pro sk17i.
After a lot of trial and error, I solved the error doing:
wiping cache partition
factory reset
installing cm10 rom
installing gapps one version older: gapps-jb-20120726-signed.zip (I am new and unable to post a link, just google it.)
The main takeaway - use the older gapps and after install, update them using market. Maybe just doing this will solve the problem for you.
PS. I am using extender kernel by M66B
Even though I'm using the latest nightly for the samsung galaxy nexus I ran into this same issue. Cleared data for android keyboard but as others couldnt find the data dictionary so since I use a 3rd party keyboard anyways, I went back into android keyboard and disabled it. No more error for me, hope that helps.
The solution to this seems that the newes Gapps Version for JB is not compatible with 4.1.x. http://wiki.rootzwiki.com/Google_Apps#20121130.
So if your using Android 4.1.2 you have to stay with gapps 20121011.
20121130 is for Android 4.2 only. In that case a bad choice to stay with JB for the new release, as this cannot easyly be seen in the name of the zip package..
If you already installed 20121130 it should be sufficient to reinstall ROM and after that gapps version 20121011. If that doen't work you need to wipe..
miro279 said:
The solution to this seems that the newes Gapps Version for JB is not compatible with 4.1.x. http://wiki.rootzwiki.com/Google_Apps#20121130.
So if your using Android 4.1.2 you have to stay with gapps 20121011.
20121130 is for Android 4.2 only. In that case a bad choice to stay with JB for the new release, as this cannot easyly be seen in the name of the zip package..
If you already installed 20121130 it should be sufficient to reinstall ROM and after that gapps version 20121011. If that doen't work you need to wipe..
Click to expand...
Click to collapse
No luck, I needed to install a 3rd party keyboard. Strangely, the same method (flash rom+gapps) worked on a friend's phone.