[MOD] mikeyxda tweaks for 2.17.651.5 base - HTC EVO 3D

After installing and playing with two 2.17.651.5 based ROM's, it's hard to give up the new base because it is so fast and efficient. That said, 2.17.651.5 changed a lot, and tweaks are limited at this point. I thought I'd share a couple of tweaks I put together that work well on the three updated Evo 3D's I have access to. I've been running these and enjoying them for a couple of days so I though others may find them useful while we wait for OC kernels and other goodies that are compatible with the new base.
BE AWARE OF WHAT THESE MODS DO BEFORE YOU INSTALL
They are designed for Evo 3D's that have had both the firmware and ROM base updated to 2.17.651.5
Even though these are simple boot tweaks, use at your own risk​
New Jan 23, 2012
awakenings v0.5: WiFi scan interval now 5 min w/screen off and 1 min w/screen on for even more battery savings
As with any tweaks, please do a Nandroid backup prior to installing these. While you could just re-flash your ROM of choice to uninstall them, be safe and do a backup first.
Both of these mods can be installed over an Evo 3D 2.17.651.5 base ROM with just a cache/dalvik wipe.
awake-v05-1.2Ghz-E3D-2.17.651.5.zip
Base: 2.17.651.5 only
ROMS: Works on both odexed and deodexed 2.17.651.5 ROMs
Status: confirmed working
These are my awakenings tweaks. They activate full-time dual core operation while the screen is on and single core underclocked operation while the screen is off. Most of these tweaks have a good history in the CleanROM thread (thanks Scott) and they've been adapted to the new base. Here's the breakdown of what it does:
Dual cores online while screen is on
Single core and underclocked while screen is off
(new in 0.5) WiFi scan interval: 1 min while screen on, 5 min while screen off
CPU parameters optimized for the new base/kernel
Dimmed capacitive lights
Uses a consolidated list of tweaks, reviewed and added from other sources
Cleans out (empties) your init.d folder if you have one to avoid conflicting tweaks
init.d support is NOT required: all tweaks are in init.post_boot.sh!
To uninstall, reflash your ROM.
Performance improvements have been measured in the 2% to 12% range (depending on the benchmark). This latest base is difficult to improve upon as it is already fast, but dual core operation does reduce lag in some situations and I believe creates a smoother, snappier UI even on the 2.17.651.5 base. Please do not use these awakening tweaks on ROM's that have the old base: the CPU parameters are specifically optimized for the 2.17.651.5 ROM and kernel (for now).
cbatt-E3D-2.17.651.5.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Base: 2.17.651.5 only
ROMS: Works ONLY on deodexed 2.17.651.5 ROMs
Status: confirmed working
Very cool circular battery meter with 1% increments plus text percentage. I found this battery meter here at XDA and the install script says it was created by vinchenzop. So credit to vinchenzop: I just took it and ported it into the new 2.17.651.5 base.
7-in-1-power-E3D-2.17.651.5.zip
Base: 2.17.651.5 only
ROMS: Works ONLY on deodexed 2.17.651.5 ROMs
Status: confirmed working
7-in-1 power menu w/ability to restart into recovery, bootloader, and more. Thanks to Scott from www.scottsroms.com for the file from CleanROM Reborn. I only take credit for making it flashable!
ext-QS-and-more-E3D-2.17.651.5.zip
Base: 2.17.651.5 only
ROMS: Works ONLY on deodexed 2.17.651.5 ROMs
Status: confirmed working
Thanks to mwalt2 for this. Here's a flashable version of the Extended Quick Settings mod which does the following:
Adds Media Volume, Brightness, and Auto Rotation to the Quick Settings Menu
Removes "Recent apps"
no GPS reticle
proper 3G/1x icon
Mike
__________________
Some of my other creations (mostly digital photography software):
http://www.ddisoftware.com

Good to see you start on your own
Sent from my PG86100 using Tapatalk

Extended settings
Thanks for this! I've been screwing around trying to get extended settings to run but I ain't smart enuff.....
Anyway to get them for this new base?

ozzie1p said:
Thanks for this! I've been screwing around trying to get extended settings to run but I ain't smart enuff.....
Anyway to get them for this new base?
Click to expand...
Click to collapse
Not yet. Some things that dig deeper into the UI like that are going to take time. I plan to go slow and whatever flashable stuff that I make that I think others might benefit from, I'll add them to the OP as I go.
Mike

Nice to see more mods popping up for the 3d

Nice!! DL now

Glad to see your tweaks thread Mike!

Awesome! Time the flash! thanks Mike.
Sent from XDA Premium on my EVO 3D

Will these work in the new base odexed?
Sent from my PG86100 using Tapatalk

Seems to work great so far. Just loaded it up.
Chauleyboii said:
Will these work in the new base odexed?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Sent from my PG86100 using XDA App

Way to go Mike, running CleanRom Reborn currently. I think its about to get a little better lol
Thanks!!!

Thanks for this.
Phone's ringin', dude.

Running these with joelz/vins 3.5 warm... Running REALLY well... Thanks!

Chauleyboii said:
Will these work in the new base odexed?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
To be honest, all my tests have been on deodexed versions but it should work fine on odexed as well.
Mike

Thank you Mike, you deserve all the credit for your hard work.
Just don't forget us at Cleanrom!

Circle Battery mod worked on odexed for me

running both tweaks on odexed version....
a ok!
Was pulling 2400s in quadrant before tweak. Pulled 2780 after! Love the battery mod.

ozzie1p said:
Thanks for this! I've been screwing around trying to get extended settings to run but I ain't smart enuff.....
Anyway to get them for this new base?
Click to expand...
Click to collapse
I've attached the mods I did to SystemUI.apk. It's stock 2.17.651.5 with GPS recticle removed, recent apps removed from pulldown, changed to display 3G/1x properly, and extended quick settings added. It's only for deodexed ROMs and you'll have to figure out how to push/copy it to /system/app (I use adb when I was testing it).
If you want to just get the extended quick settings, you just delete the following from QuickSettings.smali in SystemUI.apk (decompile with apktool).
Code:
.line 79
iget-object v2, p0, Lcom/android/systemui/statusbar/preference/QuickSettings;->mSettingItems:[Lcom/android/systemui/statusbar/preference/StatusBarPreference;
aget-object v2, v2, v7
invoke-virtual {v2, v7}, Lcom/android/systemui/statusbar/preference/StatusBarPreference;->setEnable(Z)V
.line 80
iget-object v2, p0, Lcom/android/systemui/statusbar/preference/QuickSettings;->mSettingItems:[Lcom/android/systemui/statusbar/preference/StatusBarPreference;
aget-object v2, v2, v8
invoke-virtual {v2, v7}, Lcom/android/systemui/statusbar/preference/StatusBarPreference;->setEnable(Z)V
.line 85
sget-boolean v2, Lcom/android/systemui/statusbar/StatusBarFlag;->HTC_QS_TASK_MANAGER:Z
if-nez v2, :cond_0
.line 86
iget-object v2, p0, Lcom/android/systemui/statusbar/preference/QuickSettings;->mSettingItems:[Lcom/android/systemui/statusbar/preference/StatusBarPreference;
aget-object v2, v2, v10
invoke-virtual {v2, v7}, Lcom/android/systemui/statusbar/preference/StatusBarPreference;->setEnable(Z)V
.line 92
:cond_0
iget-object v2, p0, Lcom/android/systemui/statusbar/preference/QuickSettings;->mSettingItems:[Lcom/android/systemui/statusbar/preference/StatusBarPreference;
aget-object v2, v2, v11
invoke-virtual {v2, v7}, Lcom/android/systemui/statusbar/preference/StatusBarPreference;->setEnable(Z)V

Question Would this work with anthrax r9 ? Thanks also running warm 544 thanks
Sent from my PG86100 using xda premium

@mwalt2
Damn, very nice! Thanks for that.

Related

How do you change the "Personalize" button on the rosie launcher?

How do you change the "Personalize" button on the rosie launcher to another function?
For example, how could I set it up to launch a browser or some other program?
Thanks
-Scott
there is a thread in themes and apps that has it, not on a comp right now otherwise i would give you a direct link, but its called remapped rosies, and it has browser, MMS, camera, etc.
just head over and i'm sure you'll find it.
hope this helps!
oh btw you need to be rooted and on a deodexed rom for it to work.
FaithCry said:
there is a thread in themes and apps that has it, not on a comp right now otherwise i would give you a direct link, but its called remapped rosies, and it has browser, MMS, camera, etc.
just head over and i'm sure you'll find it.
hope this helps!
oh btw you need to be rooted and on a deodexed rom for it to work.
Click to expand...
Click to collapse
Thanks, but I am looking for the actual code that you modify so I can make the changes my self.
scrosler said:
Thanks, but I am looking for the actual code that you modify so I can make the changes my self.
Click to expand...
Click to collapse
just take the a file of his thread, and a clean systemUI.apk from a 2.3.3 rom and make a diff of both files.
Thats teh way i've done this.
j4n87 said:
just take the a file of his thread, and a clean systemUI.apk from a 2.3.3 rom and make a diff of both files.
Thats teh way i've done this.
Click to expand...
Click to collapse
Yeah, thats what I am doing now....
Its actually rosie.apk but I know what you mean....
scrosler said:
Yeah, thats what I am doing now....
Its actually rosie.apk but I know what you mean....
Click to expand...
Click to collapse
oh, yeah sry, rosie.apk for sure.
If you need help, just ask
Ok, here is what I did...
I downloaded a Rosie.apk that uses Launchkey because I figured it would be in easy string to search for and it was....
I found this @ \smali\com\htc\launcher\Launcher.smali
Code:
.line 5538
new-instance v2, Landroid/content/ComponentName;
const-string v3, "com.beansoft.launchkey"
const-string v4, "com.beansoft.launchkey.Redirect"
invoke-direct {v2, v3, v4}, Landroid/content/ComponentName;-><init>(Ljava/lang/String;Ljava/lang/String;)V
invoke-virtual {v1, v2}, Landroid/content/Intent;->setComponent(Landroid/content/ComponentName;)Landroid/content/Intent;
Now, I figured it would be as simple as searching for the similar strings in an unmodified roise in the same file but I keep pulling up blanks.
I know I am close... but I dont get it....
I just want to take the unmodified rosie and give it that function instead of pulling up personalize...
Any thoughts?
I am in the same boat. Hopefully if you get this down, please share. Thanks!

[FIX] wallpaper scrolling issue on TWLAUNCHER

THIS WAS POSTED IN THE skyrocket forum but since we share the same problem I post this here as well .
Part A_
1_ On the GNOTE 's Gallery a Simple hack to allow full size of 'wallpaper'
here it is : http://www.mediafire.com/?84yb70al1fewdhk
there is a known bug you need to select portrait size then you can reselect the landscape size
Using the Intl NOte's Gallery is bug free and allows that feature.
(not sure if this gallery will work well for the skyrocket users )
(but I dont think its needed either if you guys need a modified gallery I will post how to modify it also )
Part B_
_framework.jar\smali\android\service\wallpaper\WallpaperService$Engine.smali
find :
method doOffsetsChanged()V
then
find :
Code:
.line 735
const/high16 v1, 0x3f00
.line 736
.local v1, xOffset:F
const/4 v2, 0x0
.line 737
.local v2, yOffset:F
const/4 v3, 0x0
.line 738
.local v3, xOffsetStep:F
const/4 v4, 0x0
.line 739
.local v4, yOffsetStep:F
:try_start_0
iget-boolean v9, p0, Landroid/service/wallpaper/WallpaperService$Engine;->mPendingSync:Z
replace with
Code:
.line 735
:try_start_0
iget v1, p0, Landroid/service/wallpaper/WallpaperService$Engine;->mPendingXOffset:F
.line 736
.local v1, xOffset:F
iget v2, p0, Landroid/service/wallpaper/WallpaperService$Engine;->mPendingYOffset:F
.line 737
.local v2, yOffset:F
iget v3, p0, Landroid/service/wallpaper/WallpaperService$Engine;->mPendingXOffsetStep:F
.line 738
.local v3, xOffsetStep:F
iget v4, p0, Landroid/service/wallpaper/WallpaperService$Engine;->mPendingYOffsetStep:F
.line 739
.local v4, yOffsetStep:F
iget-boolean v9, p0, Landroid/service/wallpaper/WallpaperService$Engine;->mPendingSync:Z
note that the line numbers might not be the same .
if you use this in your rom please mention my name somewhere
a simple thanks goes a long way a coffee even further
I will continue to help as much as I can. We have a skyrocket and note so i am trying to pinpoint what exactly is different side by side
I'm not home right now, but I pulled the TW Launcher from the Captivate KK4 2.3.5 update. The dpi was all off, of course, but scrolling worked.
Also, I decompiled Launcher Pro as well since scrolling works on that launcher.
As soon as I'm back in front of a computer I can upload them for reference, if needed.
I am pretty sure onky 2.3.6 has the issue on the skyrocket
(scrolling works fine on ours.. 2.3.5)
Will upload files asap
Sent from my SAMSUNG-SGH-I717 using XDA App
heads up its fixed
DAGr8 said:
heads up its fixed
Click to expand...
Click to collapse
Nice work, incredible.
Send it over if you want someone to test it.
EDIT: and what was the solution?
EDIT 2: Saw your other post. Nice find DAGr8.
lactardjosh said:
Nice work, incredible.
Send it over if you want someone to test it.
EDIT: and what was the solution?
Click to expand...
Click to collapse
very easy
OP updated .
i shodul have comsidered looking at the intl note but I didnt believe they had it working .
I tried the bravia engine mod for the intl note this morning (that actually works on our phone) and noticed the intl note's gallery had the landscape feature for the wallpaper , so I went straight for it .
Sweeeet
Now i can move on to the Next items on my list. ...bluetooth reconnect (though mine is working fine now i think)
Sound issues
Top notch man I knew someone more experienced could find the solution! It would have taken me weeks
Sent from my SAMSUNG-SGH-I717 using XDA App
DAGr8, are your changes backwards?
My framework.jar has the smali code you're saying to change it to already.
Just out of curiosity, what's the procedure for recompiling and recompiling stuff like that? I do non-android related Java coding, so I know crap about androids internals, but I'd love to take a hacking surgical knife to things someday.
lactardjosh said:
DAGr8, are your changes backwards?
My framework.jar has the smali code you're saying to change it to already.
Click to expand...
Click to collapse
rofl yes they are . I edited it now
Dagr8,
I replace the Galary3D with the stock one and set permission. Restarted the phone but i still don't find the option for portrait or landscape mode when choosing wallpaper as my S2. Did i miss any step?
Thanks
sweetboy02125 said:
Dagr8,
I replace the Galary3D with the stock one and set permission. Restarted the phone but i still don't find the option for portrait or landscape mode when choosing wallpaper as my S2. Did i miss any step?
Thanks
Click to expand...
Click to collapse
im confused a bit here , you have askyrocket right ?
and what gallery were you using prior to this one ?
you shoudl use the 2.3.5 gallery ,
Face Of Boe said:
Just out of curiosity, what's the procedure for recompiling and recompiling stuff like that? I do non-android related Java coding, so I know crap about androids internals, but I'd love to take a hacking surgical knife to things someday.
Click to expand...
Click to collapse
Man, I'm with you bro. I'm almost done with my Network Security degree, and sometimes I think I should have gone for programing instead, but I think is easier to find a job on Networking. A little direction on how to get things started would be nice, so DAGr8 wouldn't have to do all the job by himself.
Thanks for all your awesome job.
Sent from my SAMSUNG-SGH-I717 using xda premium
DAGr8 said:
im confused a bit here , you have askyrocket right ?
and what gallery were you using prior to this one ?
you shoudl use the 2.3.5 gallery ,
Click to expand...
Click to collapse
No i don't have the skyrocket. Now i'm confused. I thought just replace the file you provide(option A) in Mediafire to the stock Galary3D Note to be able to enable to choose scrolling wallpaper.
sweetboy02125 said:
No i don't have the skyrocket. Now i'm confused. I thought just replace the file you provide(option A) in Mediafire to the stock Galary3D Note to be able to enable to choose scrolling wallpaper.
Click to expand...
Click to collapse
no the fix is much more 'complex' . requires framewokr.jar edits , you can flash my rom its built in now . all the gallery allowed you to do is to have a landscape wallpaper instead .
sweetboy02125 said:
Dagr8,
I replace the Galary3D with the stock one and set permission. Restarted the phone but i still don't find the option for portrait or landscape mode when choosing wallpaper as my S2. Did i miss any step?
Thanks
Click to expand...
Click to collapse
see the part I put in bold ? thats why I thought you had an s2
DAGr8 said:
no the fix is much more 'complex' . requires framewokr.jar edits , you can flash my rom its built in now . all the gallery allowed you to do is to have a landscape wallpaper instead .
see the part I put in bold ? thats why I thought you had an s2
Click to expand...
Click to collapse
hahah Got it. Yes i do have the ATT S2 2.3.4 and it has the option to choose portrait/landscape. Misunderstood bro...
****x76 said:
Man, I'm with you bro. I'm almost done with my Network Security degree, and sometimes I think I should have gone for programing instead, but I think is easier to find a job on Networking. A little direction on how to get things started would be nice, so DAGr8 wouldn't have to do all the job by himself.
Thanks for all your awesome job.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
What I did to pull it and do the edits was to adb pull /system/framework/framework.jar then edited the lines in a text editor, then just adb pushed <location of edited file> (to) /system/framework/framework.jar
Hope it helps
EDIT::::
This is what I did, figure I'd explain on it.. adb pull /system/framework/framework.jar
That pulled it into my android platform-tools.
then I had to decompile the framework .jar I used the android apk tool to decompile it by in cmd (file location of the android apk tool) apktool d framework.jar ./out
which made a file called out. out>smali>android>service>wallpaper then find WallpaperService$Engine.smali
I edited the .smali in notepad.. Follow Da_g's OP to edit the lines. (For me the lines were the same as his, but may not be for you).
after you've edited it, save it then you have to recompile it.
back to cmd; apktool b -f -d out it'll recomplie it all to out>dist> framework.jar
then you need to adb push the framework back to system/framework/framework.jar
for me i used root explorer to make the /system R/W its quicker for me then doing it in adb shell.
Hope it helps those confused and I mean no disrespect to Da_g for positing this, just hope this would save some time for those that dont know how to do it.
And Da_g, if I posted this in the wrong place, Sorry, just let me know and I'll remove it.
Excellent!
dkirchik said:
What I did to pull it and do the edits was to adb pull /system/framework/framework.jar then edited the lines in a text editor, then just adb pushed <location of edited file> (to) /system/framework/framework.jar
Hope it helps
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using XDA App
Dagr8...just a heads up...the skyrocket gallery already allows for lanscape and portrait. ..and scrolling has not been an issue
Again..it may be a 2.3.5 vs 2.3.6 issue but our skyrocket does both with no modifications needed
Sent from my SAMSUNG-SGH-I717 using XDA App

[ROM]6/23/12 freEVO LTE 1.2 (SomeSense/Speed/CoreDuo/Hybrid[De]Odex)

Hi guys, welcome to freEVO LTE 1.0. This ROM is 'senseless' in that it doesn't have the HTC launcher or widgets, and tries to remove as much bloatware as possible while maintaining a fully functional ROM.
[size=+1]Thanks:[/size]:
-Team Win, AlphaRev X, Unrevoked, CyanogenMod team, toastcfh, Shinzul, TrevE, netarchy, dsixda, zeppelinrox, ch33kybutt, Death-M0nk, cayniarb, flipzmode, LiquidSolstice, Mikedick, wildcatswr5, SteelH, kushdeck, Ihtfp69, Team Bamf, aamikam, mwalt2, chad_goodman, JoelZ9614, eyeballer, viperboy, steal25, iconeo, Rydah805, Nutzy, Virus, hockeyfamily737, J.eremy, frosty_ice, Vinchenzop, YACO, dropzeroc, Zanz, runandhide05, Team Nocturnal, smokin1337, gruesomewolf, and the entire XDA community especially the modders, themers, and the helpful members. If I forgot you, or you would like to be included in the thanks list just because, shoot me a PM.
[size=+2]ROM Information[/size]:
Software version 1.13.651.1 with Android 4.0.3
Zipaligned
Hybrid [De]Odexed
Removed bloat, Sense launcher/widgets, and Play Store available apps.
Apex Launcher included
Camera Shutter sound option
Uncompressed MMS
Auto-brightness MOD
LongPress Home key for recent apps
Recent apps key replaced with Menu key
Half press camera shutter for search
DualCore Always MOD
Auto CPU Scaling and performance based on battery life.
Init.d support
Tweaked out Kernel Ramdisk (eliminates logging whenever possible, etc)
Dimmed capacitive buttons
Tweaks galore (build.prop,init.d)
[size=+2]Known Issues/ToDo[/size]:
Known Issues:
-Some personalize items don't work.themes, skins, etc. This is due to the Sense launcher not being included.
-Trying to set the Alarm on the AOSP clock results in FC. The clock is more for looks than functionality.
-Let me know of any more.
ToDo:
-Hybrid [De]Odex
-Random apk mods
-ICS style icons/theme
-Remove items that don't work in Personalize
-Semi-transparent notif bar
-Fix preconfigured settings
[size=+2]Addons[/size]:
[size=+1]Sprint Visual Voicemail[/size] | [size=+1]Mirror[/size]
[size=+2]Patches[/size]:
WIPE DALVIK WHEN INSTALLING 1.2
6/23/12-1.2
[size=+1]freEVO LTE 1.2 update patch[/size] | [size=+1]Mirror[/size]
[size=+1]freEVO LTE 1.2 update patch with Stock core settings[/size] | [size=+1]Mirror[/size]
[size=+3]STOP! READ FIRST[/size]
-When flashing, the ROM may appear to be stuck on enabling EXT4 Tweaks but it is not. It will take approx 10 minutes. I'm not sure if this is a problem with TWRP or just this phone. TWRP may also go back to its splash screen and freeze, this can be fixed by holding the power button until the phone shuts off. Proceed to boot back into TWRP, clear the cache, and flash the ROM again, in which case it should complete a bit faster.
[size=+2]Download[/size]:
[size=+1]freEVO LTE 1.1[/size] | [size=+1]Mirror[/size]
freEVO LTE 1.1 MD5: ECEFBEACDB62DF76E1540C5C6EA2B634
[size=+1]freEVO LTE 1.0[/size] | [size=+1]Mirror[/size] (thanks alchemist316)
freEVO LTE 1.0 MD5: E6BDB2AA125CC3B2A24B2180392A3136
[size=+2]Screenshots[/size]:​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[size=+2]Changelog[/size]:​5/31/12-1.0:
-Release 1.0
6/9/12-1.1:
-Removed 3 dot menu (thanks runandhide05)
-Modified framework-res.apk with a few other things (brightness control,etc)
-Replaced SuperSU with modified Superuser by ChainsDD (thanks Zanz!)
-Integrated long home mod with power options mod (thanks Vinchenzop and runandhide05 for those)
-Removed apps association (Thanks steal25,iconeo)
-Removed YouTube (grab from market)
-Removed (htc_smart_device_manager)
-Made a few edits to the Kernel Ramdisk
6/11/12-1.1a:
-Fixed PowerAMP not installing issue
-Added Stock cores option
6/23/12-1.2
-Modified Messaging to include Secure box and Blocklist
-Tether/HotSpot mod (Thanks mik/kaos420)
-Disable Signature check (Thanks one_love_420)
-1x/3G icons
-Remove QXDM2SD & Lib
-Add roaming only option to Phone.apk
-Hybrid 3G/WiFi over MMS (Thanks Rydah805 for initial MMS over WiFi idea)
-More tweaked memory management settings (Thanks mox123)
-Browser debug menu mod
-Long press volume to skip tracks mod (Thanks one_love_420)
[size=+2]Upcoming/Done[/size]:​freEVO LTE 1.3
-ICS icons
-Battery precents in notif bar
-Added overscroll
-Removed logging
-Remove clock in notif bar
-Modified services.jar with V6 SuperCharger edits (Thanks zeppelinrox)
-Quick Settings (Thanks aamikam)
[size=+2]FAQs[/size]:​-Why did you include 3 clocks?
Because I wanted to! No, really because there's the sense clock, which is alright, then there's the ICS AOSP clock, which is alright, then there's the Gingerbread AOSP clock, which is awesome.
First and i probably took your post
can't wait!
Who is this guy posting ROM's??? jkjk
While I personally am not a fan of the rosie as I prefer the Sense one myself, I will say this......I LOVE the detailed out Hardware specs you tossed in there!!! Good Stuff!!
sorry for posting bud, couldn't help it once I saw it....
It's uploading, guys
EDIT: It's live! Check the OP.
Awesome!!
Sent from my EVO using xda premium
freeza said:
It's uploading, guys
EDIT: It's live! Check the OP.
Click to expand...
Click to collapse
If u need I sent a db link to u
Sent from my EVO using xda premium
alchemist316 said:
If u need I sent a db link to u
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thanks man adding it as a mirror.
If you get market errors like I did.
Go accounts and sync and remove Google account and than open the market from the app itself and setup account .
Edit great and fast no lagging so far like the start up animation
Sent from my SPH-D710 using xda premium
Will be trying later today.
Sent from my EVO using Tapatalk 2
Great work I changed the dpi to 275 and added the button mod to get rid of the remaining dots
Edit just ran quadrant first run 5202 nice
Sent from my EVO using xda premium
alchemist316 said:
Great work I changed the dpi to 275 and added the button mod to get rid of the remaining dots
Sent from my EVO using xda premium
Click to expand...
Click to collapse
275? How's that working out for you? I was thinking about trying a different DPI too
I see you've got a few mods too. I will be adding almost all of those in future releases (especially the removal of the 3 dots) but it's cool to see they're working out good.
freeza said:
275? How's that working out for you? I was thinking about trying a different DPI too
I see you've got a few mods too. I will be adding almost all of those in future releases (especially the removal of the 3 dots) but it's cool to see they're working out good.
Click to expand...
Click to collapse
The dpi change is fine no market issues or app problems ..
One thing I noticed was the CPU dropped to 702 I didn't know who so I installed set CPU to see if I can change back up I noticed running the third quadrant it scored 3790 around .
After the setcpu change tried again back to over 5 .
Edit I figured you would add on and remove in.future releases its nice to see that this phone has great capabilities as far as mods looking forward to it thanks again for this
Sent from my EVO using xda premium
alchemist316 said:
The dpi change is fine no market issues or app problems ..
One thing I noticed was the CPU dropped to 702 I didn't know who so I installed set CPU to see if I can change back up I noticed running the third quadrant it scored 3790 around .
After the setcpu change tried again back to over 5 .
Edit I figured you would add on and remove in.future releases its nice to see that this phone has great capabilities as far as mods looking forward to it thanks again for this
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Cpu drops frequency depending on battery life to conserve battery. This only happens off charger though. I'll be adding an optional removal patch to eliminate that.
freeza said:
Cpu drops frequency depending on battery life to conserve battery. This only happens off charger though. I'll be adding an optional removal patch to eliminate that.
Click to expand...
Click to collapse
Oh cool that's great for battery life always like better batt over benchmark scores.
I didn't even know it could clock that low I was scared of freeze ups even though that low didn't effect apps starting or running that I noticed
Sent from my EVO using xda premium
how much free ram is avail?
looks great
Hope it helps I cleared let it sit and opened xda
Sent from my EVO using xda premium
Awesome! Thanks freeza
Sent via XDA Premium
Rat farts!!! I want to run this so bad! Still haven't gotten the activation email from HTCDEV to unlock the phone but as soon as I do, this is going on my phone! Thanks Freeza! Glad your here.

[HOW TO] [TEAM XPOSED] Disable Geo Tagging In Camera By Default

Gonna quote most of SteelH's [How To] post opener:
This reference guide is to tell you what to edit to disable Geo-Tagging by default for the EVO 4G LTE in Camera.apk. It is not an all-inclusive how-to on adb, decompiling/recompiling apks, etc. There are already several very good sources right here on XDA for that information. This can manually be turned off/on by the user, but this is intended for rom developers who want it off by default.
Decompile Camera.apk and look for \com\android\camera\DisplayDevice.smali:
Code:
.method public static isDisplayGPSindicator()Z
.registers 1
.prologue
.line 1110
const/4 v0, 0x[COLOR="Red"]1[/COLOR]
return v0
.end method
Change const/4 v0, 0x1 To const/4 v0, 0x0
Final Should Look Like:
Code:
.method public static isDisplayGPSindicator()Z
.registers 1
.prologue
.line 1110
const/4 v0, 0x[COLOR="Red"]0[/COLOR]
return v0
.end method
For the convenience of the community, I have attached 2 zips (Odex & Deodex - v. 1.13.651.1) with the modifications already in place. Also includes 'Shutter Sound Toggle.'
What exactly is the point of this? Wouldn't it just be easier to toggle it off? Unless this was cooked into a rom.
husker91 said:
What exactly is the point of this? Wouldn't it just be easier to toggle it off? Unless this was cooked into a rom.
Click to expand...
Click to collapse
Rydah805 said:
This can manually be turned off/on by the user, but this is intended for rom developers who want it off by default.
Click to expand...
Click to collapse
lol
fachadick said:
lol
Click to expand...
Click to collapse
Ahh I do seem to have missed that part of the post haha
husker91 said:
Ahh I do seem to have missed that part of the post haha
Click to expand...
Click to collapse
It's all good though!

Samsung Keyboard Fix?

Has there been a fix for this yet on VZW? Someone in the sprint forum has made a fix for the auto-correct and also made it so it takes less time for the sticky keys.
They didn't make a fix, they are using the updated keyboard or had an ota to fix it.
adrynalyne said:
They didn't make a fix, they are using the updated keyboard or had an ota to fix it.
Click to expand...
Click to collapse
eclipxe said:
Hey all, this is my first mod, but it was driving me crazy that the stock samsung keyboard didn't support auto-correct - and the timeout delay was way too long.
I'm working on an auto-patcher in the next couple of days.
EDIT:
I attached the APK: /system/app/
Make sure to set the proper permissions, then reboot.
The code changed is below
Here's a first stab at fixing both, would love some feedback.
1. To change the long press delay
In PointerTracker:
Code:
###################################################
# Change the long press delay to 200ms from 500ms #
###################################################
.line 498
const/16 v0, 0xc8
.line 499
.local v0, delay:I
packed-switch p1, :pswitch_data_0
.line 504
const/16 v0, 0xc8
.line 507
:goto_0
int-to-long v1, v0
return-wide v1
.line 501
:pswitch_0
const/16 v0, 0xc8
2. To add auto-correct
In SwiftkeyQwertyLatinInputModule
Code:
.line 312
:cond_3
##################################################
# Add support for auto-correct on word separator #
##################################################
#check if the user has entered text
iget-object v7, p0, Lcom/diotek/ime/framework/input/AbstractInputModule;->mComposing:Ljava/lang/StringBuilder;
invoke-virtual {v7}, Ljava/lang/StringBuilder;->length()I
move-result v7
if-lez v7, :cond_10
iget-object v7, p0, Lcom/diotek/ime/framework/input/AbstractInputModule;->mEngineManager:Lcom/diotek/ime/framework/engine/InputEngineManager;
iget-object v8, p0, Lcom/diotek/ime/framework/input/AbstractInputModule;->mComposing:Ljava/lang/StringBuilder;
invoke-interface {v7, v8, v9}, Lcom/diotek/ime/framework/engine/InputEngineManager;->getCharSequence(Ljava/lang/StringBuilder;I)I
invoke-virtual {p0}, Lcom/diotek/ime/framework/input/SwiftkeyQwertyLatinInputModule;->updateSuggestion()V
invoke-virtual {p0}, Lcom/diotek/ime/framework/input/SwiftkeyQwertyLatinInputModule;->setComposingText()V
##################################################
# End support for auto-correct on word separator #
##################################################
#move clearCandidateList from beginning of processWordSeparator to after we do correct
:cond_10
invoke-virtual {p0}, Lcom/diotek/ime/framework/input/SwiftkeyQwertyLatinInputModule;->clearCandidateList()V
#code below is not changed - just for reference
iget-object v7, p0, Lcom/diotek/ime/framework/input/AbstractInputModule;->mEngineManager:Lcom/diotek/ime/framework/engine/InputEngineManager;
iget-object v8, p0, Lcom/diotek/ime/framework/input/AbstractInputModule;->mCandidates:Ljava/util/ArrayList;
invoke-interface {v7, v8}, Lcom/diotek/ime/framework/engine/InputEngineManager;->getSuggestion(Ljava/util/ArrayList;)I
.line 313
Click to expand...
Click to collapse
So this is an updated keyboard?
+1
If we can get autocorrect working on the Sammy keyboard I would be a happy camper. It is the only thing that prevents me from using it (and jumping between swiftkey and thumb keyboard).
I stand corrected. But it is fixed in the updated keyboard, yes.
adrynalyne said:
I stand corrected. But it is fixed in the updated keyboard, yes.
Click to expand...
Click to collapse
Why would this crash on a deodexed VZW/AT&T rom? It doesn't seem like the keyboard would have anything to do with the carrier. The APK is just for the keyboard too, which is also weird
I just posted the VZW version of the APK (from CleanRom 4.0.5 ACE) in the hopes that he can modify it too. Not sure why they are carrier specific.
spiff72 said:
I just posted the VZW version of the APK (from CleanRom 4.0.5 ACE) in the hopes that he can modify it too. Not sure why they are carrier specific.
Click to expand...
Click to collapse
You should quote the guy i posted in my post. The work looks practically done since he tells you exactly how to do it. I"m pretty sure just needs to be tweaked a bit to work with VZW, but have no clue.
I installed the APK from that other thread on my system, even tried going to a dif nandroid backup of a different deodexed rom, both times the keyboard fails to load up (it is just a black square like normal, with no keys) and it FC
kimdoocheol said:
Why would this crash on a deodexed VZW/AT&T rom? It doesn't seem like the keyboard would have anything to do with the carrier. The APK is just for the keyboard too, which is also weird
Click to expand...
Click to collapse
There are libs needed as well.
I didn't really have time to get the 4.1.2 keyboard working, so I did this for you guys.
adrynalyne said:
I didn't really have time to get the 4.1.2 keyboard working, so I did this for you guys.
Click to expand...
Click to collapse
Thanks, are we supposed to flash this? I tried flashing it and my keyboard won't even slide up/FC.
I tried changing it to APK and no go either.
kimdoocheol said:
Thanks, are we supposed to flash this? I tried flashing it and my keyboard won't even slide up/FC.
I tried changing it to APK and no go either.
Click to expand...
Click to collapse
Yes it is to be flashed.
I don't support other people's roms so if you are on clean rom sorry. I only tested this with a Verizon rom and it does work.
adrynalyne said:
Yes it is to be flashed.
I don't support other people's roms so if you are on clean rom sorry. I only tested this with a Verizon rom and it does work.
Click to expand...
Click to collapse
that is what I figured, i was looking inside and am guessing you need to be odexed?
Thanks though for your effort, you should post in in the themes and apps section. i think a lot of people would like something like this
hopefully someone can port it to CleanROM later then....
Isn't cleanrom based off of 4.1.2? Doesn't 4.1.2 have the fix from Samsung???
would this patch work with beanstown? it's based off stock verizon
jblist90 said:
would this patch work with beanstown? it's based off stock verizon
Click to expand...
Click to collapse
It should.
adrynalyne said:
Isn't cleanrom based off of 4.1.2? Doesn't 4.1.2 have the fix from Samsung???
Click to expand...
Click to collapse
Nope. Running this ROM and the Sammy KB will show the assumed correct word in blue in the middle of the suggestion row, but if you press space, it just inserts what you typed (even when the suggested word is the word that really is correct). I don't know if this is operator error on my part, but this is the same thing it was doing when I was stock unrooted.
adrynalyne said:
Isn't cleanrom based off of 4.1.2? Doesn't 4.1.2 have the fix from Samsung???
Click to expand...
Click to collapse
Nope, sadly. adrnyalyne, did you post in the other thread about the less time for sticky keys, or did you just fix the autocorrect?
spiff72 said:
Nope. Running this ROM and the Sammy KB will show the assumed correct word in blue in the middle of the suggestion row, but if you press space, it just inserts what you typed (even when the suggested word is the word that really is correct). I don't know if this is operator error on my part, but this is the same thing it was doing when I was stock unrooted.
Click to expand...
Click to collapse
You are right. Go into the settings for the SS keyboard and you will see that it gives you the Swift Key option as to what space bar is SUPPOSED to do. I have mine ticked to replace the word, but it doesn't do that. I have also tried unticking it and same result. it really sucks.
Confirmed working with auto correct on beans
adrynalyne said:
It should.
Click to expand...
Click to collapse
JBeXX said:
Confirmed working with auto correct on beans
Click to expand...
Click to collapse
I can also confirm it works! This was prob the only flaw I had with this phone, thanks!
Adrynalyne...would you mind if Beans incorporated this into his Rom?

Categories

Resources