Related
This is an ext4-formatted system image of the stock rom for the original LG G watch along with my custom ramdisk/kernel (invisiblek_v8.img). Currently based off M1D64S.
If you like to tinker around with files on your /system partition, you may have noticed that starting with MEC23G, this device now uses squashfs as its /system partition filesystem. The problem here is that squashfs cannot be simply written to like ext4 (or really any other filesystem you're probably familiar with). Which makes it a lot more difficult to mod.
The current system partition isn't big enough for us to use ext4 with everything that's included in the stock rom. So I've had to trim it down a bit. Currently it ends up with about 12mb free.
Here's a list of what I've removed: https://gist.github.com/invisiblek/69927e9727dbc2478fc83f72cc6a8f6e
tl;dr: I remove a bunch of localized fonts, the google fit app, a few watch faces, and a script that replaces your recovery with the stock recovery on boot. You can add these back either by sideloading the apk(s) or pushing the files back to their respective location on /system.
Here's a zip of everything that was removed, in case you want to add something back (which is now super easy since /system is ext4!): http://download.invisiblek.org/dory/rom/M1D64S_ext4/removed.zip
Download: http://download.invisiblek.org/dory/rom/M1D64S_ext4/M1D64S_ext4.zip (this is unrooted, you can flash android wear supersu yourself from twrp)
md5sum: 520781014c3191e8fd73e824556597ff
How to flash:
- You must be OEM unlocked in order to use this as well as being familiar with how to fastboot images.
- Grab the zip from above and extract it
- Reboot your device into fastboot mode (either via adb reboot bootloader from android, or by holding the small button on the back of the device while its powered off)
- Issue the following commands:
Code:
fastboot flash system system.img.ext4
fastboot flash boot boot.img
fastboot reboot
Feel free to use, modify and share this all you want, but please link back here so others wishing to tinker can get a (mostly) fully stock base to start with!
It gets stuck at boot logo, after some time it reboots in twrp
After installing supersu it is in bootloop
After flashing Invisiblek kernel v8 it works!
flash this rom and Invisiblek kernel v8 and twrp, it works good!
eio.adea said:
It gets stuck at boot logo, after some time it reboots in twrp
After installing supersu it is in bootloop
After flashing Invisiblek kernel v8 it works!
Click to expand...
Click to collapse
Ah...lame...well, I just swapped out the boot.img that was in there with a copy of my v8 image.
Seems to work fine for me.
Any chance of us getting a full ROM on this device? i.e. Ghoma for 6.0.1
I did try to move fit to the watch and succeeded, but there is no fit workout app...
A question, is not it better F2FS that ext4? I am sorry, if it is a silly question.
@invisiblek M1D65B released
When I try to flash supersu I keep getting error: 2, no description. I pushed it to /sdcard/ and tried to install it with TWRP.
This is for real, folks. The first working custom recovery for Asus ZenPad 8.0 Z380M and a method to flash it under a locked bootloader. This took quite a bit of work to make, partly due to having to find a way to bypass the locked bootloader. And because of a kernel configuration issue that limited the size of the initial ramdisk, which took some serious effort to weed out. @lss1977 helped to port it to this device. And of course, credits to TeamWin for TWRP.
In addition to this thread, the current Z300M/Z301M TWRP thread and the the old Z300M recovery/rooting thread may be helpful. These models share the same hardware and software base, so most things that apply to one tablet also apply to the other.
DISCLAIMER
As usual, you do anything described in this post at your own risk. No one but you is responsible for any data loss, bricking or damage of your device.
REQUIREMENTS
Windows PC
SP Flash Tool version 5.1532 (only this version will bypass security checks)*
MediaTek VCOM drivers (available through Windows Update)
Z380M scatter file, attached
Recovery image, attached
Z380M preloader file (optional), available inside the stock firmware download
ZenPad Z380M tablet upgraded to Android N
* If you prefer to use a more recent SP Flash Tool, check out the special image file below.
This won't be a guide on how to use SP Flash Tool. There are plenty of good guides out there like this one on how to set up drivers, load scatter files, flash and make backups with SP Flash Tool. If you're not familiar with this software or how to flash MediaTek devices in general, please do your research before attempting this. I will just get straight to the specifics about the ZenPad 8.
FIRST TIME INSTALLATION
For a locked bootloader:
At this point you should have your tablet powered off, the drivers installed, all of your data backed up, and SP Flash Tool v5.1532's Download tab open and loaded with the tablet's scatter file. Open the download agent file DA_PL.bin, replacing the default MTK_AllInOne_DA.bin. (You can use the AllInOne DA if you want, but the procedure involves extra steps as described below.) Load the extracted TWRP recovery image (twrp-3.2.1-0-z380m.img) under the recovery partition line in the partition table. Click the Download button inside SPFT. Now just connect the USB cable to your tablet and your computer's USB port. It should start the download process automatically and disconnect when finished.
Alternative Method:
If you're using MTK_AllInOne_DA.bin, you have to hold the Volume Up key as you insert the cable, which puts the device into an emergency download mode. In addition, you will need to have the stock preloader*.bin file loaded inside SPFT for it to be able to communicate with your tablet. The preloader is available inside the official zip file download. Do not flash the preloader (untick the box) or any partitions other than recovery. You just need to have a valid bin file selected under the Preloader line.
For an unlocked bootloader:
If you have used the Asus unlock tool to unlock your device, you will still not be able to use fastboot flash to install a custom recovery. However, you can do a "hot boot" or a tethered boot of TWRP. This method doesn't require SP Flash Tool. Download the TWRP image, put your tablet in fastboot mode and connect to PC. Then run this command to boot TWRP dynamically:
fastboot boot twrp-3.2.1-0-z380m.img
Once inside TWRP, flash twrp-3.2.1-0-z380m.img to Recovery using Install -> Install Image. Then reboot to recovery. You may be able to use TWRP in the tethered boot mode, but that could result in glitches due to different parameters passed by the bootloader to the kernel. That's why flashing is recommended.
To update from your installed TWRP version to a new one, just transfer the image to your tablet, then boot to TWRP and install it by going to Install -> Install Image and flashing to Recovery.
START RECOVERY
With the tablet powered off, hold the Volume Up and Power keys together until you get to a menu where you can select "recovery". Use Vol. Up to scroll and Vol. Dn to select. If you have a locked bootloader, it will show a Yellow State message because the recovery is not signed by the OEM. Just press volume up to boot it. On the welcome screen of TWRP it will ask you about modifying the system partition, I suggest you go with Keep System Read-only. Doing otherwise will complicate your OTA updates.
WARNING: Never start the stock recovery from the bootloader menu on this device. It is programmed by the bootloader to instantly wipe your data without any warning. Also, be aware that Android installs the stock recovery at every normal boot cycle. So you either have to flash the TWRP every time you want to run it, or disable the automatic recovery installation in the stock firmware. Any kind of mod to the boot image will prevent the automatic recovery installation. If you're not sure which recovery you have installed, you can always do a 'adb reboot recovery' from Android without risk of data loss.
What works: Basically everything... access to major partitions, decrypted userdata partition, decrypted adoptable storage, external SD card, ADB, USB-OTG, touch interface, splash screen, installing stock Asus OTA/web FW updates
What doesn't work: (no known problems yet, but please report any)
Not guaranteed to work: factory reset
DOWNLOAD
(Updated February 3, 2018: updated kernel to firmware 5.3.18; up-to-date TWRP 3.2.1 sources)
SP Flash Tool v5.1532
Z380M Scatter file for all storage sizes (right click, Save link as...)
Recovery image
Signed image for Flash Tool only -- may be flashed with recent SP Flash Tool versions -- DO NOT INSTALL USING ANY OTHER METHOD -- tested with SPFT 5.1736.
Development and experimental files
Source code
P.S. The thanks button doesn't bite.
Nice one now lets get some custom roms done.
Has anyone installed this yet? I see the file has been downloaded a few times. Any feedback is welcome.
If you want the recovery to stick after reboot either rename or remove system/bin/install_recovery.sh.
lss1977 said:
If you want the recovery to stick after reboot either rename or remove system/bin/install_recovery.sh.
Click to expand...
Click to collapse
The way I did it was to edit the init.rc file inside the boot ramdisk and comment out the service block that calls install_recovery.sh. I used the MTK boot image unpack/repack tools. I don't know, it seems like changing anything on the system partition will break OTA updates because of dm-verity. Because that depends on verifying each block of the file system. I have never even mounted the system as R/W in recovery.
how to create scater file from text posted? I copied all text to MT8163_Android_scatter.txt file but when open with splash tools give error "scatter file is invalid"
please atach your working scatter file to other atachments
PxYra said:
how to create scater file from text posted? I copied all text to MT8163_Android_scatter.txt file but when open with splash tools give error "scatter file is invalid"
please atach your working scatter file to other atachments
Click to expand...
Click to collapse
OK, I added the scatter file as a download. It was a pain in the ass to copy & paste. (But it did work.)
Problem fixed downloaded new version of flashtool 5.16 and scatter working
Ok I installed TWRP on Z380M P00A, and wanna say to other
1. Use VCOM drivers only from splash tool official site
2. To install VCOM drivers first need enter chinese recovery tablet, then in windows device manager you see USB device, install manualy drivers (don forget in windows disable driver signature)
3. Use only SP-Flash-Tool-v5.1532.00, newer or older version not properly working with this phone
Ok, thanks for the update, PxYra. Just to let you know, there are signed versions of VCOM drivers floating around so you don't need to mess with signature enforcement. Here's one: https://www.androidfilehost.com/?fid=24591000424943663. They are also updated by Windows so you can just let Windows Update install them.
Thanks for your work.
Flashing procedure works only with "MTK_AllInOne_DA.bin" method for me. But this is OK!
(Updated May 6, 2017: added kernel from firmware 5.3.7, source code cleanup)
Click to expand...
Click to collapse
is it possible to get the older versions? I need Android 6.x, because of xposed-Framework for my Zenpad 8.0 Z380M.
Greets Freisei
Hey freisei...
I never posted a version for Android 6. There was just one based on the 5.3.6 kernel, practically the same as the current one. That's why I didn't keep it. I could try to build one for you if you want, but I can't test it of course. Does this recovery not boot at all on the old firmware?
It's strange that the DA_PL.bin method didn't work for you. What happened when you tried it? I suppose the old preloader doesn't allow it(?).
hello guys, you think lineage os official version for asus z380kl (p024) will work on our z380m ?
---------- Post added at 08:19 PM ---------- Previous post was at 08:05 PM ----------
Can anyone help me? after selecting recovery img, pressing download and inserting usb cable, nothing happens. Thanks in advance
lss1977 said:
If you want the recovery to stick after reboot either rename or remove system/bin/install_recovery.sh.
Click to expand...
Click to collapse
hello friend, can you please upload that file? I deleted it, but now I need it to revert to official recovery, as my zenpad is bricked! It would be of great help! thanks!
Pires_7 said:
hello friend, can you please upload that file? I deleted it, but now I need it to revert to official recovery, as my zenpad is bricked! It would be of great help! thanks!
Click to expand...
Click to collapse
Your ZenPad didn't brick because you deleted install_recovery.sh. It's because you modified the system partition. Making any mods to system is bad advice unless you know exactly what you're doing. Even mounting it in r/w mode can break it. That's because dm-verity has tripped and is blocking access to changed blocks of the file system. So you have 3 options: mod your boot image fstab file to disable dm-verity, restore the original system image block-for-block (either from backup or official firmware converted to an img file), or wipe userdata (lss reported that to work).
Pires_7 said:
hello guys, you think lineage os official version for asus z380kl (p024) will work on our z380m ?
Click to expand...
Click to collapse
Nope, no chance.
diplomatic said:
Your ZenPad didn't brick because you deleted install_recovery.sh. It's because you modified the system partition. Making any mods to system is bad advice unless you know exactly what you're doing. Even mounting it in r/w mode can break it. That's because dm-verity has tripped and is blocking access to changed blocks of the file system. So you have 3 options: mod your boot image fstab file to disable dm-verity, restore the original system image block-for-block (either from backup or official firmware converted to an img file), or wipe userdata (lss reported that to work).
Nope, no chance.
Click to expand...
Click to collapse
Ok. I made some real s*it, I think I deleted every partition except recovery. Can you provide me a twrp backup or some way around my problem?
What do you mean you deleted every partition except recovery? There's like 28 partitions. You would have to work hard to accomplish that.
My first suggestion is to extract a system.img from the Asus stock firmware zip using this. Then flash it with SP Flash Tool. You might also try to install a full firmware zip from TWRP. Although I have no idea if that will work or if it's even safe to try.
diplomatic said:
What do you mean you deleted every partition except recovery? There's like 28 partitions. You would have to work hard to accomplish that.
My first suggestion is to extract a system.img from the Asus stock firmware zip using this. Then flash it with SP Flash Tool. You might also try to install a full firmware zip from TWRP. Although I have no idea if that will work or if it's even safe to try.
Click to expand...
Click to collapse
i was able to extract system.new.dat from stock firmware zip, but it extracts to a system folder. How do I flash this through sp flash tool?
OK, the system folder you don't need. It should have produced a system.img file also. That's the file you need to flash. Just select it for the system partition row in the partition list and then Download. Hopefully that will be enough.
EDIT: I just looked at the script, and realized the system.img.img file gets deleted in the process. So what you need to do is start the extraction, then after it makes system.img.img, when it starts extracting individual files, hit Ctrl+C. Then you'll end up with the img file.
Thank you very much! it works! YOU are the BEST!
please tell me, in your scatter file, address partition_name: frp (0x80a5000) is correct? if i format this partition (frp), google account remove?
Thanks to serajr here - https://forum.xda-developers.com/showpost.php?p=75505302&postcount=2973 Go directly to that post and give thanks.
You need:
Stock O ftf (best to use Flashtool/Xperifirm)
Modded boot img for 34.4.A.2.19 - https://mega.nz/#!AgtQ2Sob!JjLRcUVjuy6FNanjGY49g-YYmkcda04witfHp4hwvmo
Modded boot img for 34.4.A.2.32 - https://mega.nz/#!Z1tzEJbZ!e9ET_RtUpKjXRwnJa_TDsMrVwvT-hPxmk06KtryHOuc
Modded boot img for 34.4.A.2.85 - https://mega.nz/#!p5UwAabR!_ofmr_WdId9RdH48Xb3cZtSIzsQ6qcTJTAFYcKHFWJE
Kernel elf file to use with rootkernel [34.4.A.2.85] - https://mega.nz/#!M102lYTZ!9bj2KE-vbNWlej3Dw0NuiXJcfpgiy16svSHud73bLfw
Modded boot img for 34.4.A.2.107 - https://mega.nz/#!Nls0EQBR!Cc4lVcA85f8YeNTo8nMqsuwLzveW5duSbyeZDlI5kDE
Kernel elf file to use with rootkernel [34.4.A.2.107] - https://mega.nz/#!Zp10CASK!iGLE94Tj1SSk1U2p4KLpVrcGmD68C3YvqKMXD6VPFjI
Modded boot img for 34.4.A.2.118 - https://mega.nz/#!14VkzCCB!GK-KEv0A-ZyhysXc1-IusyJjJEB-D5ZWOLm1DRt31tA
Kernel elf file to use with rootkernel [34.3.A.2.118] - https://mega.nz/#!Ylcm1SwA!GuX9dfd2HAqLXy1jom-C6mgP0s4jYXl9qSySkvb_mtA
TWRP - https://forum.xda-developers.com/x-compact/development/ub-twrp-v3-2-1-xperia-x-compact-t3793837
1. Flash stock ftf from Xperifirm via Flashtool
2. After flash, connect in fastboot (before booting phone) and type in command line 'fastboot flash boot boot.img' (this assumes that your modified boot img is in the current directory,and is named 'boot.img'; otherwise, you need to edit the command accordingl)
3. Then type 'fastboot flash recovery twrp-3.2.1.img' (same note as above)
Done
Now, you can flash Magisk, (or whatever), and have root access.
If you want Drm fix, flash serajr's zip here - https://forum.xda-developers.com/attachment.php?attachmentid=4404527&d=1517335127
If you want to restore your own ta with munjeni tool, you will need to patch boot img yourself with rootkernel tool here - https://forum.xda-developers.com/showpost.php?p=74724162&postcount=2793
How to get stock kernel elf and patch your boot img with rootkernel:
1. Download and build stock ftf from Xperifirm via Flashtool
2. Go to Flashtool > tools > sin editor, and navigate to stock kernel sin file, in the downloaded firmware folder. Click on sin file and choose 'exrract data', and it will create a kernel elf.
3. Follow the guide by serajr. You need only to put the kernel elf into rootkernel folder, then open a command prompt there and run 'rootkernel kernel.elf boot.img'. Answer all questions 'yes', unless you want to skip drm fix and restore your own ta, (if that's the case, you need your target file in that folder renamed to TA.img). After script runs, you will have a new boot img that you can use to follow the guide.
Done...
Magisk, MicroG, and Xposed tested... (update - I haven't tried yet, but I've read that Xposed not working on ...85; update 2 - confirmed, bootloop; update 3 - Xposed fix now available here - https://forum.xda-developers.com/x-compact/themes/xposed-fix-118-t3870673)
I made a patched boot img with rootkernel tool and uploaded it. Link in op. Don't forget to thank serajr...
Can confirm the above method worked for me. I used the TA.img instead of drm fix, and i get root and security test still have widefine and fidokeys enabled.
Just slight reminder for linux user, you need to add execute permission on both `rootkernel` and `bootimg`, otherwise rootkernel tool will fail with permission issue.
levone1 said:
I made a patched boot img with rootkernel tool and uploaded it. Link in op. Don't forget to thank serajr...
Click to expand...
Click to collapse
With which options is your modified boot image prepared?
maluus said:
With which options is your modified boot image prepared?
Click to expand...
Click to collapse
Dm-verity disable - yes
Force encrypt disable - yes
Drm fix - yes
For Drm fix you still have to flash serajr zip. If you want to restore ta with munjeni tool, you will need to patch boot yourself.
Op updated for 3-click root...
SuperSU,Xposed
Hello,
can you please help me with a little problem? I just did everything step by step, but I can't still get root access (after flashing boot.img SuperSU still shows "no root detected"). And one more question. I used that DRM fix zip, but still get "Not provisioned". Am I miss something? (but nevermind, I can use my TA backup, but I'm just curious about that).
Thanks guys.
Arsis said:
Hello,
can you please help me with a little problem? I just did everything step by step, but I can't still get root access (after flashing boot.img SuperSU still shows "no root detected"). And one more question. I used that DRM fix zip, but still get "Not provisioned". Am I miss something? (but nevermind, I can use my TA backup, but I'm just curious about that).
Thanks guys.
Click to expand...
Click to collapse
...
Arsis said:
Hello,
can you please help me with a little problem? I just did everything step by step, but I can't still get root access (after flashing boot.img SuperSU still shows "no root detected"). And one more question. I used that DRM fix zip, but still get "Not provisioned". Am I miss something? (but nevermind, I can use my TA backup, but I'm just curious about that).
Thanks guys.
Click to expand...
Click to collapse
Boot img just enables modification by disabling Sony security stuff, but you still need to flash whatever mod you want. So after flashing boot and recovery img, then flash supersu (or whatever), and you should have root.
I can't say about drm fix, since I've never used it before, but I don't think it will show fido provisioned, etc, because it simply recreates the drm functions through a different method, (not with ta).
I was able :laugh::good: Xposed release link
levone1 said:
Boot img just enables modification by disabling Sony security stuff, but you still need to flash whatever mod you want. So after flashing boot and recovery img, then flash supersu (or whatever), and you should have root.
I can't say about drm fix, since I've never used it before, but I don't think it will show fido provisioned, etc, because it simply recreates the drm functions through a different method, (not with ta).
Click to expand...
Click to collapse
Oh, well. Thank you! It's working now.
Hello,
i flashed on my sony with oreo this boot.img and twrp and im stuck on sony logo. Any ideas what could be wrong? I tried android 34.4.A.0.364 singapure and UK versions and neither of these works with this twrp.
I have the newest platform-tools and flashing went well.
Thanks
Stephenhs said:
Hello,
i flashed on my sony with oreo this boot.img and twrp and im stuck on sony logo. Any ideas what could be wrong? I tried android 34.4.A.0.364 singapure and UK versions and neither of these works with this twrp.
I have the newest platform-tools and flashing went well.
Thanks
Click to expand...
Click to collapse
Can you try running the tool and creating the boot.img yourself? I use the singapore ftf and doesn't have problem booting the system (with the boot img I created myself). I do not put twrp on boot img though. I boot twrp from fastboot when needed
I created boot.img and everything works Thanks a lot!
I dont understang the part that says :
Android Oreo ramdisk patching needs some additional files, and they must be copied from Oreo /system into the rootkernel's filesystem_files folder, prior to run the script, and they are:
Code:
/system/vendor/etc/fstab.qcom
/system/vendor/etc/init/hw/init.qcom.rc
/system/vendor/etc/init/hw/init.target.rc
(you can pull these files through adb, or even converting system.sin to system.ext4 and take them out from there - just copy them, and DO NOT touch its contents)
how to do that!? im noob...
Kianush said:
I dont understang the part that says :
Android Oreo ramdisk patching needs some additional files, and they must be copied from Oreo /system into the rootkernel's filesystem_files folder, prior to run the script, and they are:
Code:
/system/vendor/etc/fstab.qcom
/system/vendor/etc/init/hw/init.qcom.rc
/system/vendor/etc/init/hw/init.target.rc
(you can pull these files through adb, or even converting system.sin to system.ext4 and take them out from there - just copy them, and DO NOT touch its contents)
how to do that!? im noob...
Click to expand...
Click to collapse
Post linked in op has special instructions for us with Xc - skip that part.
https://forum.xda-developers.com/showpost.php?p=74724162&postcount=2793
hello guys, i've created a boot.img whit the tool of rootkernel whit my ta.backup but it does not work. the boot it's ok but if i chek my drm keys they say not provisioned. my ta.backup load 2.097.152 byte like the post shows. can someone help me? thanks
update:
sorry guys, i've done again the kernel patch whit my ta backup and this time goes perfect. i don't know why the first time didn't work but now it's ok!
I tried the 3 click method, without doing any boot image myself, but impossible to decrypt with TWRP (or reboot to system).
Wxfdswxc said:
I tried the 3 click method, without doing any boot image myself, but impossible to decrypt with TWRP (or reboot to system).
Click to expand...
Click to collapse
Twrp - https://forum.xda-developers.com/x-compact/development/twrp-3-2-1-decryption-t3751998
As for rebooting to system, can't say for sure... Root method involves only changing boot img, so shouldn't affect system. Any errors in fastboot, etc?
Original flash should be clean flash official stock ftf from Xperifirm. First boot could be 10 minutes...
Hello Guys I am new to the community and I'm willing to learn more about phones.
My question is where is the bootloader's code stored?It cant be stored into the /boot partition as according to this the bootloader either starts the kernel, which then starts android, or the recovery mode. Inside the /boot there is only the kernel and the RAMDISK according to this. Is it inside a chipset on the motherboard? In order to be able to be unlocked the code must be editable. It cant be stored inside the /boot because sometimes you need to delete that partition in order to install custom ROM. You dont install a different bootloader....
My second question is where is the recovery mode stored? I 'm sure it is stored inside the phone's hard drive but I couldnt find any partition with that name.
Ok. I have a thrid question now. Theoritically, are we able to flash a custom ROM without unlocking the bootloader? Probably we could but due to the bootloader we won't be able to access it. Am i right? Same rules apply for custom recovery too(correct me if I'm wrong).
@PinkNinja
It depends on both whether Android is a A/B partition slots system or not and on Android version.
BTW: The XDA-thread you cited is a 1:1 copy of an article published in 2011. Today is the year 2020. Things since Android 7 have drastically changed.
What the guy above said, on a only you have a recovery partition and a bootloader stored on boot when on a/b you have both bootloader and recovery on boot partition.
On the last question, no, you cant flash custom rom with bl locked. In order to flash custom rom you need custom recovery and you can't install/boot it without unlocking bootloader because when bootloader is locked you can only flash/boot images signed by oem, that's thw whole point of bl blocking
If you are curious about your partitions you can fastboot oem partition and there you have most info, as well as in the android websitee, it's everything explained https://source.android.com/
Hi there,
I have recently installed a Magisk Module on my successfully rooted phone that so far didn't display any problems until I enabled said module (this one: Pix3lify, sorry can't post links)
Now it's stuck in a bootloop and I dont know how to recover my data from this position. I do know how to reinstall the stock rom and re-root just fine, I dont need help with recovery. What I do really wish is to backup some files from the user data partition.
I don't know how to do this as I never been in this position and before I spend all day trying to recover it I was wondering if you guys maybe know a way to do it, if possible at all.
I have access to:
- Fastboot
- Recovery (the BlackView Recovery ROM, no TWRP, couldn't find an image that runs. However, I do have access to `fastboot boot` to flash any image)
- SP Flash tools
As is expected, the device is rooted and the bootloader is unlocked. I just want my data if it's possible. If not, I'll just recover using the method that will remove all data, sadly...
Thanks in advance!
EDIT: I decided to swallow my loss and install the stock rom since nobody replied yet, however, I did make a full backup of my ROM (especially userdata) and I now can see the filesystem inside WWR_MTK, but I can't read /data because it's encrypted (but I know the password) my new question therefore is if i can open up this image still. Thanks in advance!