Broken Screen - AT&T Samsung Galaxy S II SGH-I777

Dropped my phone, cracked the glass. Phone works fine, but the glass is cracked and I want to replace it. Can't really find anything online, so I thought I would come here and ask you guys if you know where I can find a replacement for the cracked screen and if it is easy to replace. Thank you in advance for your help!

^eBay. I think the screen cost around $150 or so the last time I checked (last month).

OP.. connexion25 may be able to help you. Not sure if he is doing screen replacements but he very well might. Here's his website: mobiletechvideos.com
but contact him, ask him. See what he says

Did you hammer it? 'cuz I dropped a few times and screen was OK.
I thought it's built with Gorilla tough glass.

http://forum.xda-developers.com/showthread.php?t=1175772

gsrrr said:
http://forum.xda-developers.com/showthread.php?t=1175772
Click to expand...
Click to collapse
Pretty sure that's for the i9100
Sent from my SAMSUNG-SGH-I777 using Tapatalk

shouldn't be THAT much different right?
a few screws here and there
wedge it open
???
profit

Related

[Q] Worst nightmare - dropped my atrix and cracked the screen HELP!

So i've been an Atrix owner for about 2 weeks now and my worst nightmare happend today. I was buying a drink from a vending machine and the phone slipped out of my pocket and fell SCREEN FIRST onto concrete.
I quickly picked it up and noticed THERE WAS A HUGE CRACK in the screen!
I AM SO SAD RIGHT NOW cause i bought the atrix outright from AT&T
i dont think the LCD panel itself was damaged but the glass on the surface only. The display looks perfectly fine still so i was curious if anyone knows how to switch out the glass part? What tools do i need?
I found this one ebay:
http://cgi.ebay.com/Motorola-MB860-...838?pt=LH_DefaultDomain_0&hash=item588d7db4fe
is this the right part?
or do i have to buy the entire LCD, cause its much more expensive:
http://cgi.ebay.com/AT-T-MOTOROLA-A...507?pt=LH_DefaultDomain_0&hash=item33666a4883
also, does anyone know any reputable sellers that sell LEGIT parts such as the digitizer? I'm not sure if i can trust these random ebay sellers...any suggestions would be appreciated
i attached some pictures to show you what happend - i still can't believe it happend
i'm also really surpirsed the gorilla glass broke so easily. The drop was at MOST 1.5 feet..
Bakedbread said:
So i've been an Atrix owner for about 2 weeks now and my worst nightmare happend today. I was buying a drink from a vending machine and the phone slipped out of my pocket and fell SCREEN FIRST onto concrete.
I quickly picked it up and noticed THERE WAS A HUGE CRACK in the screen!
I AM SO SAD RIGHT NOW cause i bought the atrix outright from AT&T
i dont think the LCD panel itself was damaged but the glass on the surface only. The display looks perfectly fine still so i was curious if anyone knows how to switch out the glass part? What tools do i need?
I found this one ebay:
http://cgi.ebay.com/Motorola-MB860-...838?pt=LH_DefaultDomain_0&hash=item588d7db4fe
is this the right part?
or do i have to buy the entire LCD, cause its much more expensive:
http://cgi.ebay.com/AT-T-MOTOROLA-A...507?pt=LH_DefaultDomain_0&hash=item33666a4883
also, does anyone know any reputable sellers that sell LEGIT parts such as the digitizer? I'm not sure if i can trust these random ebay sellers...any suggestions would be appreciated
i attached some pictures to show you what happend - i still can't believe it happend
i'm also really surpirsed the gorilla glass broke so easily. The drop was at MOST 1.5 feet..
Click to expand...
Click to collapse
Yea, thats not a bad deal. You could use DealExtreme though if you wanted. But this seems like a good deal.
Teardown Video.
http://www.youtube.com/watch?v=TbR56jSplRs
Watched a bit and it looks like a good tutorial.
Also, if you don't have the tools you might want this kit.
http://cgi.ebay.com/Motorola-MB860-...195?pt=LH_DefaultDomain_0&hash=item2310051643
It's about the same price and those are both going to ship from Hong Kong. So expect a wait. I didn't find any sellers in the U.S.
There are some that would ship from the U.S. without tools but the price is more like fifty bones instead of 30 something.
Good Luck
JdgM3NT4L said:
Teardown Video.
http://www.youtube.com/watch?v=TbR56jSplRs
Watched a bit and it looks like a good tutorial.
Also, if you don't have the tools you might want this kit.
http://cgi.ebay.com/Motorola-MB860-...195?pt=LH_DefaultDomain_0&hash=item2310051643
It's about the same price and those are both going to ship from Hong Kong. So expect a wait. I didn't find any sellers in the U.S.
There are some that would ship from the U.S. without tools but the price is more like fifty bones instead of 30 something.
Good Luck
Click to expand...
Click to collapse
You are brave soul for recommending such a bad tools.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Thanks for the recommendations everyone
Do you suggest a better pack of tools? Why do you say they're bad?
Sent from my MB860 using XDA App
greenstuffs said:
You are brave soul for recommending such a bad tools.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
Nah, they are more than capable. I replace digitizers frequently and I rarely have to break out my "good set' of tools. Yeah these are simply cheap lumps of plastic. But they work. And these tools should be safer to use than almost anything that the average person, who doesn't do this sort of thing regularly, might have on hand. I just didn't want him to order a digitizer and attack it with a butterknife. I was trying to be subtle about it tho... We don't want anyone to scuff their bezel now do we?
I am always on the lookout for great deals on tools for this. And I look forward to your recommendation for a tool set.
Atrix 4G Glass
You can find a replacement glass here. globalpartsdirect dot com
G2Smooth;129674
33 said:
You can find a replacement glass here. globalpartsdirect dot com
Click to expand...
Click to collapse
You mean http://www.globaldirectparts.com/SearchResults.asp?Search=atrix
Your phone should be under warranty! Call company first!
Sent from my MB860 using XDA Premium App
gonka95 said:
Your phone should be under warranty! Call company first!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Warranty covers a broken screen? Reason I ask is because I would rather have MOTO replace the screen (or the phone entirely) than me replacing the screen and voiding the warranty. I do not have insurance
I broke the glass on my phone 3 weeks after I bought it and didnt have insurance on it. I called motorola and they sent me an rma. I sent it in and they sent it back to me fixed in less than a week. If I remember right it cost $90 for them to fix it.
so it was only the digitizer after all?
+1 for photo of toilet roll by the bed, classy...
Sent from my MB860 using Tapatalk 2
JdgM3NT4L said:
Nah, they are more than capable. I replace digitizers frequently and I rarely have to break out my "good set' of tools. Yeah these are simply cheap lumps of plastic. But they work. And these tools should be safer to use than almost anything that the average person, who doesn't do this sort of thing regularly, might have on hand. I just didn't want him to order a digitizer and attack it with a butterknife. I was trying to be subtle about it tho... We don't want anyone to scuff their bezel now do we?
I am always on the lookout for great deals on tools for this. And I look forward to your recommendation for a tool set.
Click to expand...
Click to collapse
A friend and I splurged on the $60 iFixit tool kit because we made some spare cash on the side repairing classmates' phones. It works well, although I still don't know if I would justify the price. It seems that the major complaint on reviews for replacement electronics parts are the parts that come with them, if at all, so maybe getting a better set is worth it if you replace digitizers frequently. Replacing the Atrix digitizer/screen is a fairly easy task compared to other phones until you get to putting the new screen on, at which point trying to get the cables back into the housing becomes a pain.'
Good luck!
consolation said:
+1 for photo of toilet roll by the bed, classy...
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
Lol.....betting if you look hard enough there's lotion there somewhere too!
Sent from my MB860 using xda premium
Ugh I'm going to have to do this. My digi. Is farked as well. Now, is there a video to put this back together?. I agree that taking it apart is not the hard part at all.
iFixit will have a tear down guide.
Sent from my MB860 using Tapatalk 2
Surprisingly there is no video to put it together...
Let me tell you from experience that it's damn near impossible to put it back together without tearing the digitizer ribbon straight off the screen while trying to slip it through that tiny hole that you pulled it out of. I've replaced two screens and I still don't think I can get it right.
My screen cracked twice while still under warranty, so I played the clueless n00b after I replaced the glass (cracked screens are not covered under warranty) and claimed the phone wasn't working and I couldn't figure out why.
Strange thing is, I also couldn't find a place online that would do replacement digitizers either. I didn't look for long, but if you don't have an option of a warranty return, I'd pay the $50 or so to let someone else do this for you and get it right...
YMMV...
I recommend taking it apart completely, you can attach the digitizer to the bezel/chassis and then you don't have to deal with trying to slide the cable through that tiny hole, you can just clean the digitizer, clean the lcd, put them together and then put the entire mounting plate back together and it just clips straight in...essentially you make this:
http://www.ebay.com/itm/180835204777?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
completely removes the chance of tearing the cable off the back of the digitizer...which is pretty common, sort of adds the step of getting the mounting plate off the fascia bezel...but its not to hard, be careful when popping up the volume/buttons camera cable area, that cable tears easily.

After screen replacement, screen touching lcd easily?

So I replaced the glass part of my rezound yesterday, pretty much successfully.
But now that I have it all together again it is very easy to push the glass to the lcd and make it display those weird colors around the screen. You know what i mean if you have ever pushed too hard on your touch screen, or lcd.
I have been doing some research and I think I was supposed to put something between the glass and the lcd, not sure what though or were to get it...
If someone could let me know weather or not I was supposed to put something between the lcd and glass, and then were i could get it, I would be very appreciative.
Did you replace the old sticky tape that adheres the glass to the lcd panel?
Sent from my ADR6425LVW using xda premium
snow580 said:
Did you replace the old sticky tape that adheres the glass to the lcd panel?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
no... were can I order some and can I still use my phone in the mean time?
Check amazon... And you CAN use your phone, you just might end up with some dead pixels or something probably best to not use it or avoid touching the screen as much as possible
AshtonTS said:
Check amazon... And you CAN use your phone, you just might end up with some dead pixels or something probably best to not use it or avoid touching the screen as much as possible
Click to expand...
Click to collapse
Thanks, can you give me an idea of what to search for? I don't really have any idea what I need.
http://www.amazon.com/Adhesive-Sticker-Digitizer-Supersonic-Incredible/dp/B004WIQW3U/ref=pd_cp_cps_0
Ha ya go
AshtonTS said:
http://www.amazon.com/Adhesive-Sticker-Digitizer-Supersonic-Incredible/dp/B004WIQW3U/ref=pd_cp_cps_0
Ha ya go
Click to expand...
Click to collapse
Thank you very much!
I was looking at the shipping on it and unfortunately its like 2 too 3 weeks. I after googling it i also found some people who said they used super glue, would that be a better option if I am living without anything right now? Or possibly cutting a regular piece of 3m tape? I could probobly get that done today.
gaate said:
Thank you very much!
I was looking at the shipping on it and unfortunately its like 2 too 3 weeks. I after googling it i also found some people who said they used super glue, would that be a better option if I am living without anything right now? Or possibly cutting a regular piece of 3m tape? I could probobly get that done today.
Click to expand...
Click to collapse
I dunno about those methods, I can tell ya this: the roll is HUGE. Big as my hand spread out to fingertips lol. I could send some of my roll if ya want. Otherwise, there should be a US shipper, got mine within a week: "WirelessFinest" in Plano, TX.
PhantasmRezound said:
I dunno about those methods, I can tell ya this: the roll is HUGE. Big as my hand spread out to fingertips lol. I could send some of my roll if ya want. Otherwise, there should be a US shipper, got mine within a week: "WirelessFinest" in Plano, TX.
Click to expand...
Click to collapse
Thanks! That actually should solve my problem, I found them on amazon and its amazon prime so I got next day shipping for a few bucks.
Ill figure out how to aply them and put it on day after tomorrow.

Screen Replacement

I bought a screen replacement for my crack screen off ebay for a great deal:
http://www.ebay.com/itm/360478218769?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Yes, it came from china and I hope this screen will work when I replace my crack LCD screen on my phone. How did the screen cracked? Well, I have a desk chair with a roller on the bottom. I kind of roll over it :/ I feel so ashamed hurting my precious phone lol.
Did you get it yet? I've been monitoring this post, since I also have a cracked screen and don't want to spend $200+ dollars on replacing or insurance. Please keep me updated on this. Thanx in advance.
justinmcnairy said:
I bought a screen replacement for my crack screen off ebay for a great deal:
http://www.ebay.com/itm/360478218769?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Yes, it came from china and I hope this screen will work when I replace my crack LCD screen on my phone. How did the screen cracked? Well, I have a desk chair with a roller on the bottom. I kind of roll over it :/ I feel so ashamed hurting my precious phone lol.
Click to expand...
Click to collapse
don't want to burst your bubble, but that is the digitizer only. i think its really really hard to separate the two from each other. that is why they are so expensive to buy. but hey, might as well try if it is already broke. i understand the lcd is fine btw. i replace screens pretty often and with Samsung, you usually have to buy them fused already. guess it couldn't hurt to try though. good luck to ya, you may need a heat gun and thin wire. keep us updated when it comes in. I'm sure we all would like to know how it goes. good luck
i looked at the listing again, and i don't see any digitizer ribbon. so it looks like no digitizer is even on it. just the lens, but maybe you knew that and this is what you're looking for?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I bought 1 but giving up, don't know how to replace so i sold my cracked screen Note and bought another one
Yayodroid said:
don't want to burst your bubble, but that is the digitizer only. i think its really really hard to separate the two from each other. that is why they are so expensive to buy. but hey, might as well try if it is already broke. i understand the lcd is fine btw. i replace screens pretty often and with Samsung, you usually have to buy them fused already. guess it couldn't hurt to try though. good luck to ya, you may need a heat gun and thin wire. keep us updated when it comes in. I'm sure we all would like to know how it goes. good luck
i looked at the listing again, and i don't see any digitizer ribbon. so it looks like no digitizer is even on it. just the lens, but maybe you knew that and this is what you're looking for?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yes only for the screen len, not digitizer. I figure I bought it then trying to find the link to replace the screen without digitizer. All of them mention it hard to accomplish. I should had bought the screen with digitizer, but hey I will see how it goes...
Sent from my SGH-I717 using xda premium
just my opinion is to find complete digitizer and lcd fused together, or else you are going to have a bad time. they are very expensive, but it shouldnt be too hard to do as long as you take your time. if you found a digitizer+lens, with out the lcd, it will be really difficult. heat gunning then getting something super thin to slide down to cut between your good lcd and cracked digitizer without scratching the lcd. ive done it on an iphone 4 and the lcd was scratched from it, but it did still work and i didnt break the lcd. if you do lens only, im not sure if you will be able to get the actual digitizer off of the original lens without tearing it an then placing it on the new lens with out bubbling up or anything. i would hate for you to be out a phone for a while. good luck to you sir

[Q] How much for UK screen repair on the S3?

Hello all,
Got my S3 a couple of weeks ago and dropped it onto a wood floor on Friday with no case on it (been waiting for mine to arrive from Amazon ). The device seems to be absolutely fine apart from a very small scratch on the top left of the screen. I've been trying to live with it but it's really annoying me and would be more than happy to pay to get it fixed if it doesn't cost absolutely silly money.
Is it possible just to have just the glass replaced or will I have to shell out for the glass and the digitiser etc as well? Has anyone else had their S3 screen repaired?
Thanks
Replacing the S3 screens are pricey, I'd stick with the scratch until you do some serious damage.
It is inevitable the phone will get scratched at one point so I find it hard to believe someone would pay to have a whole screen replaced based on one scratch, you must be crazy!
If the scratch is that annoying get a decent screen protector and you won't be able to see it.
It would be very expensive. The front plate, digitizer, and amoled screen are bonded in one piece and the assembly is sold at ~US$200 in Ebay.
check out this thread .... its a must read for all s3 users with damaged glass ...
http://forum.xda-developers.com/showthread.php?t=1890708
kobz1973 said:
check out this thread .... its a must read for all s3 users with damaged glass ...
http://forum.xda-developers.com/showthread.php?t=1890708
Click to expand...
Click to collapse
I'm not sure, it looks like the front plate and the digitizer are totally inseparable http://www.youtube.com/watch?v=es8gezSdKv4.
Good luck to OP anyway.
Well where I live its costs about 310$
..so I hope I dont break mine
Sent from my GT-I9300 using xda app-developers app
ABC_Universal said:
I'm not sure, it looks like the front plate and the digitizer are totally inseparable http://www.youtube.com/watch?v=es8gezSdKv4.
Good luck to OP anyway.
Click to expand...
Click to collapse
i beg to differ ... did u check out the link to thread i posted ... already a few success stories there ...
and check out this video from about 8mins in, and you can clearly see the glass comes away separately ...
http://www.youtube.com/watch?v=W5IPaCPaY_0
kobz1973 said:
i beg to differ ... did u check out the link to thread i posted ... already a few success stories there ...
and check out this video from about 8mins in, and you can clearly see the glass comes away separately ...
http://www.youtube.com/watch?v=W5IPaCPaY_0
Click to expand...
Click to collapse
Just read, and see that you are about to do the same. Good luck to you as well.
Yet I think the person in the video didn't peel off just the glass but the glass together with the digitizer, which is slightly tinted as seen in http://www.youtube.com/watch?v=es8gezSdKv4.
The cheapest and best solution is to use a mirror screen protector. It will hide your scratch when phone is off.
When Screen on you will not notice it.
I'm sure I have read a thread where someone got it replaced at car phone warehouse for £80ish, not sure how true that is as it does seem very cheap for the job. Worst you can do is ring them and ask for a quote and them tell you this ain't true.
I have insurance which would cost me £25 excess through my bank so not really looked into costs of getting things replaced, but I have taken apart a lot of phones in the past and they are getting much harder to replace things like glass on its own. As said above it would have to have digitizer, which is pretty costly to purchase.
Sent from my GT-I9300 using xda app-developers app
Terpsi said:
Hello all,
Got my S3 a couple of weeks ago and dropped it onto a wood floor on Friday with no case on it (been waiting for mine to arrive from Amazon ). The device seems to be absolutely fine apart from a very small scratch on the top left of the screen. I've been trying to live with it but it's really annoying me and would be more than happy to pay to get it fixed if it doesn't cost absolutely silly money.
Is it possible just to have just the glass replaced or will I have to shell out for the glass and the digitiser etc as well? Has anyone else had their S3 screen repaired?
Thanks
Click to expand...
Click to collapse
you can buy the unit for £150 and follow a youtube video on how to replace, or pay between £175-£225 for a full repair.
I took mine to a Samsung repair centre on a Saturday and had it fixed within 30min, paid £215 but just wanted it done.
The glass and the digiizer are glued together so the whole unit would have to be changed.
jayc1980 said:
I'm sure I have read a thread where someone got it replaced at car phone warehouse for £80ish, not sure how true that is as it does seem very cheap for the job. Worst you can do is ring them and ask for a quote and them tell you this ain't true.
I have insurance which would cost me £25 excess through my bank so not really looked into costs of getting things replaced, but I have taken apart a lot of phones in the past and they are getting much harder to replace things like glass on its own. As said above it would have to have digitizer, which is pretty costly to purchase.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Its 80 snoops for s2 in CPW, 160 for s3 as far as i remember ...
HERE IT IS .. The Video tutorial ..
http://www.youtube.com/watch?v=aZuiCsAtThw&feature=player_embedded#!
Samsung galaxy S4 Front Glass Repair in UK
Terpsi said:
Hello all,
Got my S3 a couple of weeks ago and dropped it onto a wood floor on Friday with no case on it (been waiting for mine to arrive from Amazon ). The device seems to be absolutely fine apart from a very small scratch on the top left of the screen. I've been trying to live with it but it's really annoying me and would be more than happy to pay to get it fixed if it doesn't cost absolutely silly money.
Is it possible just to have just the glass replaced or will I have to shell out for the glass and the digitiser etc as well? Has anyone else had their S3 screen repaired?
Thanks
Click to expand...
Click to collapse
Hi
If the screen still functions and the touch is working properly you can just change the glass face but you will have to be real careful as doing it yourself without the right equipment is risky and you can end up without a screen working at all. the whole screen that is currently on the phone will be completely sealed to the phone so it is a slow process to remove it and you can end up pulling the digitizer off the lcd and again this is not fixable if this happens.
also the finish will not be as good as the original without the right type of liquid glue to go back between the glass and digitizer.
at the end of the day you are better off sending it to someone who does it a lot and has all of the gear to do it, as you will get a better finish at the end.
Mod edit: Removed..

[Q] Dropped my Galaxy S3 and need help choosing what to buy

Need help
i just dropped from my bed my Galaxy and the ultra mighty gorila glass cracked but the touch and the screen are fine, no leaks or whatever, i just need to know what i have to buy to fix this mess
i found the digitizer LCD Display and Touch Screen not included that cost $18 dollars
or the full lcd touch combo that cost $239 dollars
as i said the touch is 100% working and the lcd doesnt have any leaks
i have searched similar topics but the other cases have broke lcd
thanx in advance :good:
Just found this video, i think im going to buy only the glass, the other solution is to expensive with 239 dollars i can get a new s3 with my mobile plan
So sorry for your phone man. I guess since the touch still works you will only need the front glass. To be honest i'm looking forward to see the answer of your question, since i never understood properly how the digitizer and the front glass work. Always thought they were the same.
Seeing images like of your phone is the reason why i bought my UAG case.
Sent from my Nexus 7 using xda premium
What is it with Galaxy S3`s and so meny people dropping them and smashing there screens.
I have had my GS3 for quite a wile now and not a single drop or scratch.... are they really that slippery lol
You will need to buy them both. I have completed this repair numerous times for friends and family, and the digitizer will break close to 99% of the time.
I do consider myself very tedious and patient, but it is glued to the screen and there's a pretty slim chance of it coming off in one piece.
You can heat it up and try to get it as soft as possible, but it's super sticky.
Do yourself a favour and buy them both or else you're going to be waiting for a digitizer to come once you've started the repair process.
Hope this helps.
Sent from my GT-I9300T using xda premium
ASavva said:
You will need to buy them both. I have completed this repair numerous times for friends and family, and the digitizer will break close to 99% of the time.
I do consider myself very tedious and patient, but it is glued to the screen and there's a pretty slim chance of it coming off in one piece.
You can heat it up and try to get it as soft as possible, but it's super sticky.
Do yourself a favour and buy them both or else you're going to be waiting for a digitizer to come once you've started the repair process.
Hope this helps.
Sent from my GT-I9300T using xda premium
Click to expand...
Click to collapse
really? the fact is for the price of the lcd and touchscreen combo i can get a new s3 on my phone plan but got to sign a 1 year contract, in fact i was waiting to buy an iphone 5 with my phone contract on december when they start to sell it here in colombia
tntgdh said:
So sorry for your phone man. I guess since the touch still works you will only need the front glass. To be honest i'm looking forward to see the answer of your question, since i never understood properly how the digitizer and the front glass work. Always thought they were the same.
Seeing images like of your phone is the reason why i bought my UAG case.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
i thought the same, but then i saw the youtube videos replacing only the glass is 24 vs 239 dollars, i think i order 2 glasses just in case, and be ultra patient with the procedure
ViRuS3k said:
What is it with Galaxy S3`s and so meny people dropping them and smashing there screens.
I have had my GS3 for quite a wile now and not a single drop or scratch.... are they really that slippery lol
Click to expand...
Click to collapse
i don't know, i think is the plastic, im extra careful with phones the last phone that i cracked the screen was a sony ericcson p800, it was on mi pocket and hit it with the corner of a table
ViRuS3k said:
What is it with Galaxy S3`s and so meny people dropping them and smashing there screens.
I have had my GS3 for quite a wile now and not a single drop or scratch.... are they really that slippery lol
Click to expand...
Click to collapse
They are big, too big for a phone I've decided and they like to slip out of pockets and what not. I've decided I'm going smaller next time.
farik said:
i don't know, i think is the plastic, im extra careful with phones the last phone that i cracked the screen was a sony ericcson p800, it was on mi pocket and hit it with the corner of a table
Click to expand...
Click to collapse
u walk like superman dude
:silly:
Z3US911 said:
u walk like superman dude
:silly:
Click to expand...
Click to collapse
nah, P800 was an old phone, at that time the glass was more delicate, at that time i was working on backstage production, and you got to run sometimes, but you know i use to own a samsung vibrant and i did drop that phone a lot also handle a lot of stress, the glass never broke, i loved that phone
farik said:
i don't know, i think is the plastic, im extra careful with phones the last phone that i cracked the screen was a sony ericcson p800, it was on mi pocket and hit it with the corner of a table
Click to expand...
Click to collapse
The newer supposed "thinner and stronger" Gorilla Glass thst is on S3 is nowhere near as scratch and crack resistant as the thicker original on phones like the OG Epic. This one can get those hairline scratches much easier thsn the original. Dont try the key scratch test on the S3. I will say this though, i have 2 i9300s. One new in box and the one i use has the back cover with the white flap that covers the screen. I dropped it 2x from 4 feet on concrete and only a slight scuff on the silver side bezel
kitch9 said:
They are big, too big for a phone I've decided and they like to slip out of pockets and what not. I've decided I'm going smaller next time.
Click to expand...
Click to collapse
Sent from my GT-I9300 using Xparent SkyBlue Tapatalk 2
farik said:
really? the fact is for the price of the lcd and touchscreen combo i can get a new s3 on my phone plan but got to sign a 1 year contract, in fact i was waiting to buy an iphone 5 with my phone contract on december when they start to sell it here in colombia
Click to expand...
Click to collapse
Yeah I know what you mean. If that's the case and you can hold off for another few weeks, let's see what Google releases. Could be worth the wait as it might be an upgrade compared to the GS3.
Sent from my GT-I9300T using xda premium
ViRuS3k said:
What is it with Galaxy S3`s and so meny people dropping them and smashing there screens.
I have had my GS3 for quite a wile now and not a single drop or scratch.... are they really that slippery lol
Click to expand...
Click to collapse
It's the design of the gs3! The glass not only stands above the frame it's curved at the edges
Sent from my GT-I9300 using xda premium
Guys, for real, why does everyone think that gorilla glass is crack resistant? I mean, than bigger a screen gets than easier it can break, this is physics...
Gorilla glass more about to be scratch-resistant.
and in the case of OP I would buy a new screen and then be more careful with my phone. I just got a cheap silicon case and it protects my phone from everything without needing a screen protector.
ASavva said:
You will need to buy them both. I have completed this repair numerous times for friends and family, and the digitizer will break close to 99% of the time.
I do consider myself very tedious and patient, but it is glued to the screen and there's a pretty slim chance of it coming off in one piece.
You can heat it up and try to get it as soft as possible, but it's super sticky.
Do yourself a favour and buy them both or else you're going to be waiting for a digitizer to come once you've started the repair process.
Hope this helps.
Sent from my GT-I9300T using xda premium
Click to expand...
Click to collapse
I'd buy the digitizer for $18, worst case LCD breaks whilst separating and you'll need to buy the complete unit. Best case you fix it and save yourself $225 on complete unit.
Sent from my GT-I9300 using Tapatalk 2
From my personal experience, i'd say you'd better buy the complete unit with the glass, the digitalizer and lcd pre-assembled on the frame. I've bougth a 2 week old GT-i9300 from a friend who had dropped it and had also the problem with the sim card blocked inside and just broke the sim card reader to take it out... As i said, i've managed to have it at a really good price and bought the lcd unit (samsung original on e-bay) and believe me, you will save yourself a lot of work as the gorilla glas is glued to the digitalizer witch is also part of the oled screen, witch makes it almost impossible to take the gorilla glass without breaking the rest, or, even if you manage to get it out, you'll never glue it again without any air trapped between the two... just look on ebay, i found mine for 163€.
I have the same problem as the OP. Dropped my SGS III couple of days ago and screen cracked though I still have 100% touch screen functionality. I am planning to get it fixed though have to say that incident has made me lose confidence in the sgs3. My sgs2 was such a solid piece of abuse taker. Over one year of use and dropping on concrete and worse on a number of occasion all without a scratch. Right now I am considering the HTC One X maybe it's using the old guerilla glass which seems more durable.
Sent from my GT-I9300 using xda app-developers app
Op, were you with a case or was the phone naked when you dropped it?
Badelhas said:
Op, were you with a case or was the phone naked when you dropped it?
Click to expand...
Click to collapse
Case though not as ot of the Armor variations.. Might want to also add that the galaxy s2 used naked for all of a year. The latter device puts guerilla in guerrilla glass
Sent from my GT-I9300 using xda app-developers app

Categories

Resources