Hi friends,
I am writing to you because in the Spanish forums on telephony have not had much luck, apparently no one knows my problem and nobody has experienced before, the question is that since I opened the bootloader I have not had any problems, and loaded the roms kernels without problem until a few days ago, after a long season with a MIUI rom I was going pretty well but appear new roms for the Neo because I wanted to try and I found that when trying to boot into fastboot light load make a flashing blue micro automatically if I pressed the button off the phone starts the rom and I can not enter bootloader mode, I tried to wipe and reinstall the same data again rom but no way the bootloader will not boot.
I hope you can help me, greetings and thanks
Dr.Neo said:
Hi friends,
I am writing to you because in the Spanish forums on telephony have not had much luck, apparently no one knows my problem and nobody has experienced before, the question is that since I opened the bootloader I have not had any problems, and loaded the roms kernels without problem until a few days ago, after a long season with a MIUI rom I was going pretty well but appear new roms for the Neo because I wanted to try and I found that when trying to boot into fastboot light load make a flashing blue micro automatically if I pressed the button off the phone starts the rom and I can not enter bootloader mode, I tried to wipe and reinstall the same data again rom but no way the bootloader will not boot.
I hope you can help me, greetings and thanks
Click to expand...
Click to collapse
hi even i had the same problem . I dint figure out any solution so i flashed my stock rom and only few custom roms are able to boot on my phone !....I would suggest you to flash back the stock rom or use flash tool and try the custom roms once again !
Thanks a lot,
but, after flash stock rom, can you acces to bootloader or reflash with flashtool another kernels????? I can install roms with CMW but not kernels with bootloader.....
Related
Sorry I'm a noob at all of this. Successfully rooted my phone today thanks to Honsoon2000's excellent tutorial and toolkit. Then I went to install Android Revolution, which appeared to go successfully and then after I flashed the kernel the phone wouldn't load and just hangs at the quietly brilliant screen. I followed Honsoon's tutorial to the T (or so I thought) and everything went perfectly until right at the end when I flashed the kernel. I can make it back to the bootloader screen though it says "failed to load usb master mode". I can still make it into fastboot and recovery mode...tried recovery, and the process seemed to go sucessfully, but the phone still wouldn't load after...tried reinstalling ARHD-- it's still on the sd card and the install procedure still goes off without a hitch, but the phone still won't load. I've searched around and tried everything I can, to no avail. Any help would be muchly appreciated, and I apologize in advance for being a noob wasting people's time.
Edit: For example, when I follow the steps outlined in the FAQ it asks me to enter the command 'fastboot flash boot boot.img' , but when I do it says 'error: cannot load boot.img'.
Edit 2: So I put my boot.img file from Android Revolution into the data directory of the rooting toolkit and was able to complete the above flashboot command. I was also able to install the ROM off my SD card...however the phone still hangs on the Quietly Brilliant screen...I can't even power the phone down...whenever I try it just reboots...frustrating...really hoping someone can help me...cheers.
Before you begin, make sure that the drivers for the One X+ are installed.
Place the boot image being used on the computer's hard drive.
Boot in to recovery and flash the ROM.
When that is done, boot in to bootloader and connect the phone to the PC via a USB cable.
If the phone isn't in fastboot mode already, use the volume keys to highlight the word "fastboot", then press the power button.
Now, there should be text at the bootloader screen that says "Fastboot USB".
Finally, use the toolkit or command line and flash the kernel with the fastboot command.
This should successfully flash the ROM and the kernel. Make sure you full wipe before flashing a new ROM. If you can't seem to get the new ROM booting, the final choice is to relock the bootloader and run a RUU.
Which phone version you do own? International or AT&T / TELUS?
Did you flashed the correspondant boot.img? Did you cleared the cache? ( fastboot erase cache)
I'm trying to run an RUU but it keeps saying the battery isn't charged enough to flash anything...and this after it's been plugged in all day. Oh dear I think my phone might be done...really sucks :/
Also, it won't let me power the phone down-- every time i try it shuts the phone off briefly and then opens back up to the bootloader screen.
Fixed thanks to sarcasticphoenix. Cheers.
OK so I've tried 3 times to flash a new ROM onto my phone (Android Revolution twice and Eleganzia once) using Honsoon's toolkit...I've followed every instruction to the T as far as I can tell and all 3 times the process has gone perfectly right until the end when I flash the kernel...after that when I reboot the phone it just hangs at the Quietly Brilliant screen. I know how to relock the bootloader, flash the custom rom and get my phone back...but I really want to know what I'm doing wrong so I can install a custom ROM. I know I'm using the right ROM for my phone and am wondering what gives. Being driven crazy here...any ideas what's going wrong here would be helpful. BTW on the last attempt right after I finished and the phone hung I went into the boot loader and followed the instructions in the FAQ for fixing a bootloop...still nothing.
Edit: Solved my problem-- I managed to successfully load eleganzia...the only thing i did differently the last time was flash the kernel BEFORE installing the ROM off the SD card.
jrockwell said:
OK so I've tried 3 times to flash a new ROM onto my phone (Android Revolution twice and Eleganzia once) using Honsoon's toolkit...I've followed every instruction to the T as far as I can tell and all 3 times the process has gone perfectly right until the end when I flash the kernel...after that when I reboot the phone it just hangs at the Quietly Brilliant screen. I know how to relock the bootloader, flash the custom rom and get my phone back...but I really want to know what I'm doing wrong so I can install a custom ROM. I know I'm using the right ROM for my phone and am wondering what gives. Being driven crazy here...any ideas what's going wrong here would be helpful. BTW on the last attempt right after I finished and the phone hung I went into the boot loader and followed the instructions in the FAQ for fixing a bootloop...still nothing.
Edit: Solved my problem-- I managed to successfully load eleganzia...the only thing i did differently the last time was flash the kernel BEFORE installing the ROM off the SD card.
Click to expand...
Click to collapse
That's usually what I do first, flash the kernel and then install the zip via recovery
Sent from my HTC One X+ using xda premium
Which kernel are you referring too? Actually there is one or two kernels available but only for the International version, not the AT&T/TELUS which you seem to have.
I strongly suspect that your boot looping was because you didn't flash the boot.img file correctly or not at all. And you don't seem to install the good ROM version for your phone.
Elegancia has two ROM versions one for International and one for AT&T/TELUS users.
ARHD is for International users.
Please read Q12 of the FAQ.
Lucky Thirteen said:
ARHD is for International users.
Click to expand...
Click to collapse
Lol...yeah I don`t know how I missed that. I ended up getting elegancia successfully flashed and loaded so all is well. In retrospect this was a good experience because there`s nothing like having to get yourself unforked from a bad situation to gain an understanding of what`s going on. Cheers.
I have a couple questions and since I`m not allowed to post yet in the elegancia thread I'll try in this thread first:
1) An elegancia question: Is there a way (widget) to toggle data roaming on and off in this ROM?
2) Is there a way to tweak settings (transparent pull down, selection of launcher etc.) without wiping and reflashing the ROM?
3) What are people's favorite launcher for that ROM? I tried Atom but it was just a guess because I hadn't heard of any of them. I like it so far but am curious about the others.
Hi there.
It seems that I can't help myself anymore.
Got a prime with JB bootlader 10.4.2.18 and TWRP 2.4.3.0 on it.
Flashed SuperSU using TWRP and, after that, tried to flash
ParanoidAndroid for my device. (pa_tf201-3.10-07MAR2013-190411.zip)
Right after starting the flashing procedure TWRP seems to crash.
(It immediately shows it's splash screen again and gets laggy.)
I also tried other TF201-JB-ROMs but it happens with any of them!
I can access TWRP and Fastboot! But I got no ROM on the device
and aint able to flash one.
After hours of searching and reading it still looks like a Option 3 brick
to me and I don't know what to do next.
Some ppl tell to write the original blob from Asus' 10.4.2.18 stock rom,
others advise against that because it will get hard-bricked. I'm stuck.
Any ideas?
Seems to be solved.
Instead of using my MicroSD-card to install the new ROM I now just
used ADB to transfer the file directly onto the device.
It worked fine for cm-10.1-20130308-UNOFFICIAL-tf201.
I'll try AndroWook_Hairy_Bean_v1.51_FINAL tomorrow, or shouldn't I?
trust me andro wook HB 1.51 is the best at all !
i tried each and every one of Roms and no one can beat HB !
if u can live without changing themes or multi user features Andro Wook is best choice for u ...
must annoying issue in other none stock based Roms is that no one of them can play movies in HW acceleration mode . ( image quality will be very lower in other modes )
u should wipe system before flashing new Roms (specially after CM Roms ) ...
its a little risky but best results will come from it !
sorry for my terrible english
marleng said:
Seems to be solved.
Instead of using my MicroSD-card to install the new ROM I now just
used ADB to transfer the file directly onto the device.
It worked fine for cm-10.1-20130308-UNOFFICIAL-tf201.
I'll try AndroWook_Hairy_Bean_v1.51_FINAL tomorrow, or shouldn't I?
Click to expand...
Click to collapse
Hello. The problem is with twrp 4.2.3.0 version. Push 4.2.2.0,your problem will end.
Help!
I have an Xperia P. I decided to try cyanogenmod using the freeXperia projects fine work.
However I have seriously messed up it seems. After following the tutorial on DooLords page I encountered an small error, the Cyanogenmod 9 boot screen got stuck. No big deal. Apparentl this can happen. So i thought that I wouldn't risk doing anything more and would go back to the safety of my rooted Stock Rom.
Now however I have a bootloop of Sony going to Cyanogenmod. The phone now says that it is NOT rooted meaning that i can't flash any other kernels or roms to return to normal. I am at a dead end. I am a first time poster, a bit of a noob, but frequent visitor to the forums. Iwould really appreciate anyones assistance.
Bro, not rooted doesnt mean you cant flash kernels. I suggest you to use flashtool and fash official stock rom and thats it.
Bootloop
Bro what does flashtool say when you connect it to the computer??
Plz giv details....
mirost1 said:
Bro, not rooted doesnt mean you cant flash kernels. I suggest you to use flashtool and fash official stock rom and thats it.
Click to expand...
Click to collapse
Hi, thanks for the reply. I have sorted the problem. However I'm not exactly sure how. I had flashed a kernel that had relocked the bootloader i think meaning that I couldn't flash any rom through flashtool. Then when the phone started to run out of battery I couldn't even get to fastboot mode or flashmode. I left it overnight on charge with the bootloop running over and over again which gave me enough juice to reflash. All back to normal now. Phew!
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:
hi guys don't know if this has been posted before so if so sorry..
my problem I have galaxy s3 i9300 which I have flashed custom roms many times..
now this time I got more brave and flashed different kernel..
so to start and help you guys i flashed Resurrection_Remix_KK_v5.1.5-20140609-i9300
thought the battery was going down to fast so flashed boeffla kernel correct version etc. thought it was a bit sluggish no offence intended..
so decided to flash stock kernel back which I got from boeffla site correct version for my phone..
now is were the fun started my phone rebooted into screen loop on resurrection screen.
oh and by the way I have no power button my mate tried soldering another and failed
so you can guess my fun anyways I got round this with usb jig, went into download mode and flashed stock rom back to phone, which I have done hundred times..
this time it would not boot at all I searched and searched for answers and managed CF-Root-SGS3-v6.0 which boots straight into recovery for a sec which helps with no power. now with this I wiped every thing cache etc then with the correct timing used toolkit to reboot etc etc anyways.
problem is now that when I flash stock it seems I still have resurrection in the background don't ask me how ?? but once stock flashed and rebooted i goto file system and its still emulated/0 file system which it isnt normally and the same wallpaper is there so weird. now to top it all my menu and wifi and back button will only work when I flash back to resurrection rom and not stock...
driving me nuts sorry for long essay but theres more and I needed to explain hope you can help...
thanks andy