Guys as CM9 By: lupohirp is heating up, comments on development thread is going high and high with each passing minutes. Let as discuss off topic things here so that we can same our precious time while searching important things on DEV thread.
Development Thread
Testing Kernel
Franco_3.3 with GenLock Enabled Download
Franco_3.0 testing release (Almost Stable) Download
First testing release Download
Second testing release Download
CM9 built in kernel backup Download
Click to expand...
Click to collapse
Current Works in Progress
Here we can find what are the things DEV are working on it. So it will be much easier to find what exactly going on in DEV thread.
Camera @ ARJEN / Sweetbinodray Why Camera is not working?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Known Bugs till now
These bugs I have found while I was using this ROM. Please share bugs you have found so that we can add it in first post hence it'll be easier for all of us.
A: Camera
B: Colour Banding
C: SIM PIN Lock
E: Battery drain with few third party Apps like Facebook.
F: Some time OC gets default after reboot.
G: FM
I: DPS manager is not working for few Users.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Add on for this ROM till now:
Gaaps V7.1 ICS 4.0.3 Download
CM 9 Music Download
Installation Instruction: Click Here
Click to expand...
Click to collapse
Network Baseband
This ROM is based on New Baseband but you can have it on Old Baseband too.
I would like to flash New Baseband
I want to go for Old Baseband FIX
Click to expand...
Click to collapse
If you have driver issue
Click to expand...
Click to collapse
How about this?
http://forum.xda-developers.com/showthread.php?t=1376234&page=22
dzhonsons said:
How about this?
http://forum.xda-developers.com/showthread.php?t=1376234&page=22
Click to expand...
Click to collapse
It will shortly moved in DEv section once ROM will be released as this is WIp not discussion.
Guys, I've just flashed the rom, but I don't get any signal.
I'm on new baseband and am using amonra 2.2.1b.
Edit: Reflashed, works now.
hi,
Today I've just flashed the rom on my p500.
The Rom still has many bugs, I have tried all
those listed in the official post but I have gsm signal and i can make call.
I have flashed the rom using ClockworkMod
directly from nightly # 6 cm, so with the new baseband.
sweetbinodray said:
It will shortly moved in DEv section once ROM will be released as this is WIp not discussion.
Click to expand...
Click to collapse
There's already thread in dev section..? :>
Did lupohirp authorize you to create this topic?
dzhonsons said:
How about this?
http://forum.xda-developers.com/showthread.php?t=1376234&page=22
Click to expand...
Click to collapse
Mentioned thread is mine
It was used to discus how to build
Sent from my LG-P500 using XDA App
MaKTaiL said:
Did lupohirp authorize you to create this topic?
Click to expand...
Click to collapse
Did adfad authorize Dax?
But IF you choose to make this thread, then also make FAQ !
Greets!
mDroidd said:
Did adfad authorize Dax?
But IF you choose to make this thread, then also make FAQ !
Greets!
Click to expand...
Click to collapse
Whoever comes first... Whoever who wanna help devs open a general thread, go ahead... Do not open another one when one is active...
*beep**beep* IMDriving...
Where any cyanogen mods in this rom? cyanogenmod section in setings is empty. what the differences from stock ics other than powermenu?
First post updated.
90amper said:
Where any cyanogen mods in this rom? cyanogenmod section in setings is empty. what the differences from stock ics other than powermenu?
Click to expand...
Click to collapse
Main advantage is that CM has many included patches, so it's far easier to get it works (well as we can see it's still pretty hard). Also it should have better launcher and some other apps. And I think CM settings are comimg in future.
DaxIΠFIΠITY said:
Whoever comes first... Whoever who wanna help devs open a general thread, go ahead... Do not open another one when one is active...
*beep**beep* IMDriving...
Click to expand...
Click to collapse
That's what I meant! Those threads help the devs keep the dev topic clean
Greets!
Squarex said:
Main advantage is that CM has many included patches, so it's far easier to get it works (well as we can see it's still pretty hard). Also it should have better launcher and some other apps. And I think CM settings are comimg in future.
Click to expand...
Click to collapse
Exactly. And if you already got it to work, updating will be easier
Greets!
Screenshots here!
http://forum.xda-developers.com/showpost.php?p=21653271&postcount=313
Why it does not detect the sim? Help me please..
matteo100nze said:
Why it does not detect the sim? Help me please..
Click to expand...
Click to collapse
Won't detect mine neither, and I am on new baseband!
vlt96 said:
Won't detect mine neither, and I am on new baseband!
Click to expand...
Click to collapse
Me too.. How can we resolve??
When Pin off = works
I have other problem, I can't install apps from market skype, filemanager and other all.
Related
Oke all, i hope i am not getting in to trouble with this but i just want to help untill FXP is comming with a proper fix.
I post this because a get a ton of pms and not the time to send averyone a link.
All credits go to FXP team that are working so hard to keep ower x10 a live.
Flash this zip with the latest cwm and then reboot. Then you flash the gapps.
Just like the original.
Everything works.
I used the build,prop of FXP41 so about the phone you see 2.3.7.
O and just for the fun i put a different bootanimation in this because then people will now it is not posted by FXP and there for they are not responseble for bricking your phone. Neither am I offcourse.
Have fun.
And this thread will be deleted after FXP is comming with update.
I hope this will work for you all, did for me
and... what does this fix do?)
muratbaizhanov said:
and... what does this fix do?)
Click to expand...
Click to collapse
This fix hase no data bug and is the Fxp30 with lib files and build.prop of fxp41.
No data bug and working camera.
I made this because i want working camera and giong back to fxp30 was not a option so i made this.
So do I do a full wipe?
Just to clarify that this is still FXP030 Android 2.3.5 just with newer libraries and build.prop from FXP041.
So if you want a full Android 2.3.7, get FXP041 instead.
DLpnd said:
So do I do a full wipe?
Click to expand...
Click to collapse
Yes just like installing a new rom
Hzu said:
Just to clarify that this is still FXP030 Android 2.3.5 just with newer libraries and build.prop from FXP041.
So if you want a full Android 2.3.7, get FXP041 instead.
Click to expand...
Click to collapse
Yes but then you have the dat bug again. I made this because of the camera.
So if people do not want the camera just flash FXP30.
robertberma said:
Yes but then you have the dat bug again. I made this because of the camera.
So if people do not want the camera just flash FXP30.
Click to expand...
Click to collapse
Then the title of your thread should be "camera fix for FXP30", not "A for FXP41".
GreatBigDog said:
Then the title of your thread should be "camera fix for FXP30", not "A for FXP41".
Click to expand...
Click to collapse
Changed it
Hzu said:
Just to clarify that this is still FXP030 Android 2.3.5 just with newer libraries and build.prop from FXP041.
So if you want a full Android 2.3.7, get FXP041 instead.
Click to expand...
Click to collapse
I think we all want 041, but clearly it has problems at present.
I will try this and report back.
I just wanted to say thank you, and that the boot screen rawks!
ten_tickles said:
I think we all want 041, but clearly it has problems at present.
I will try this and report back.
Click to expand...
Click to collapse
Not sure what this fixes...I just flashed 041 update over 030 rom (No wipes, just flashed it) and everything is fine...
Data works, camera/video works (Except zoom)....whats the problem everyone is having becaue I cant reproduce it
ten_tickles said:
I think we all want 041, but clearly it has problems at present.
I will try this and report back.
Click to expand...
Click to collapse
Thats also what i want. But also camera. And now i have.
I wait your report
gregbradley said:
Not sure what this fixes...I just flashed 041 update over 030 rom (No wipes, just flashed it) and everything is fine...
Data works, camera/video works (Except zoom)....whats the problem everyone is having becaue I cant reproduce it
Click to expand...
Click to collapse
I did that too. Wait a hour or two and you see data lost
tadhara said:
I just wanted to say thank you, and that the boot screen rawks!
Click to expand...
Click to collapse
Thanks and your welcom
robertberma said:
I did that too. Wait a hour or two and you see data lost
Click to expand...
Click to collapse
OK, I will report back...so far 1/2 hour and i still have data
robertberma said:
I did that too. Wait a hour or two and you see data lost
Click to expand...
Click to collapse
+1 Wifi worked fine for under an hour....then wouldn't find websites or stay connected to market etc..
robertberma said:
Thats also what i want. But also camera. And now i have.
I wait your report
Click to expand...
Click to collapse
Works great for me, thanks
Sent from my x10i using XDA Premium App
briandevlin said:
Works great for me, thanks
Sent from my x10i using XDA Premium App
Click to expand...
Click to collapse
Hi friend, i am glad. What do you think of the bootscreen i found?
Got a lot of critics of this thread but i am glad that i made some people happy.
cheers
Hey guys,
We (Team ICS and the people in the credits) are making a ICS port built from source.
This team is:
Devs:
xplodwild
fmauNeko
Paradoxxx
Coentje44
nebkat (also part of teamhacksung)
netchip
Testers:
IamSachin
Slitexboy
datagutt
ng64
Wind_Tester
kakkatauko
tsuharesu
FurryPotato
Sorry if I forgot you! Send me a PM and you will be added.
Screenshots:
Coming soon
Features (these things don't work)
-Camera
-Camcorder
-Sound in call
-Codecs
-And much more things!
Beta's
We don't release beta's, we release a stable one when the most is working
Website
http://sgs2ics.com/
Sources
github.com/AOSP-SGS2
github.com/teamhacksung
Credits
Teamhacksung (we work together)
Oxygen team (AdamG and Schiznik, we work together)
Enjoy!
Think this should be locked untill the download links pop up?
br13an said:
Think this should be locked untill the download links pop up?
Click to expand...
Click to collapse
agree......
Probably a good idea..
Sent from my GT-I9100 using xda premium
The DL link is like 3 sentences down, try freshing your browser if it isnt showing.
45% done so far can't wait! xD
If you wanna run ICS, build it your self
netchip said:
If you wanna run ICS, build it your self
Click to expand...
Click to collapse
+1
Sent from my GT-I9100 using xda premium
netchip said:
If you wanna run ICS, build it your self
Click to expand...
Click to collapse
why dont you build it for us
Why make another thread when you already have one in Android Development? Same team, and there's nothing new in this thread... Even no download links
netchip said:
If you wanna run ICS, build it your self
Click to expand...
Click to collapse
It's bad idea.
If I built it would be an epic **** sandwich....
jangomango said:
If I built it would be an epic **** sandwich....
Click to expand...
Click to collapse
lol
-----
Looking promising, but I wouldn't put [Source] in the title yet unless there is a DL link for the source code.
Krizp0 said:
Why make another thread when you already have one in Android Development? Same team, and there's nothing new in this thread... Even no download links
Click to expand...
Click to collapse
I think this thread is unnecessary, isn't it?
Annie the Eagle said:
Looking promising, but I wouldn't put [Source] in the title yet unless there is a DL link for the source code.
Click to expand...
Click to collapse
It's now opensource & it's original.
netchip said:
It's now opensource & it's original.
Click to expand...
Click to collapse
Ah nice one! Also, just a suggestion, change Features (These things don't work) to "Currently not working". Because features normally means things that DO work
will sombody please build then.
madman_cro said:
will sombody please build then.
Click to expand...
Click to collapse
Can't build without having graphic glitches as they won't release those patches.
LOL at people in thread.
repo sync -j16
lunch
make -j16 otapackage
boom
glad to see you guys all working together to get this working ASAP.
Really appreciate your work. keep it up
Hi there,
I have installed SecDroid this morning ....
I am using a galaxy note 2 with CM-11.
Working well, except that it is a bit the mess on from where to download the latest version of this app ....
I am running the V1 beta, is it the latest version ?
when i click on "Secure Phone" I have:
"Your device is now Secure! thanks for using SecDroid!"
Is there any logs somewhere ? To see what changes it has made on my device ?
Do i have to press "Secure phone" after each reboot ?
Thx for your support.
thierryIT said:
Hi there,
I have installed SecDroid this morning ....
I am using a galaxy note 2 with CM-11.
Working well, except that it is a bit the mess on from where to download the latest version of this app ....
I am running the V1 beta, is it the latest version ?
when i click on "Secure Phone" I have:
"Your device is now Secure! thanks for using SecDroid!"
Is there any logs somewhere ? To see what changes it has made on my device ?
Do i have to press "Secure phone" after each reboot ?
Thx for your support.
Click to expand...
Click to collapse
If you have no idea what it does, even though the description is very clear... I don't even know.
Anyway, official thread is here. Use it.
http://forum.xda-developers.com/showthread.php?t=2086276
polobunny said:
If you have no idea what it does, even though the description is very clear... I don't even know.
Anyway, official thread is here. Use it.
http://forum.xda-developers.com/showthread.php?t=2086276
Click to expand...
Click to collapse
Hi,
1) I know what this app is doing .... But I don't know if this app is doing what it supposed to do on my device, there is no logs ....
2) Is the V1 Beta is the latest version ? If no, where to find the latest one ?
3) Do I have to press the Secure phone after each reboot ?
Anyway I hope that I am clear enough.
Thx
thierryIT said:
Hi,
1) I know what this app is doing .... But I don't know if this app is doing what it supposed to do on my device, there is no logs ....
2) Is the V1 Beta is the latest version ? If no, where to find the latest one ?
3) Do I have to press the Secure phone after each reboot ?
Anyway I hope that I am clear enough.
Thx
Click to expand...
Click to collapse
Look at the link I posted. Ask your questions there, not here. It's the official SecDroid thread.
polobunny said:
Look at the link I posted. Ask your questions there, not here. It's the official SecDroid thread.
Click to expand...
Click to collapse
Might be very difficult with a "Thread Closed" .....
Any ideas ?
Thx
thierryIT said:
Might be very difficult with a "Thread Closed" .....
Any ideas ?
Thx
Click to expand...
Click to collapse
Look at the last post of the closed thread...
polobunny said:
Look at the last post of the closed thread...
Click to expand...
Click to collapse
Start to be a bit complicated for simple questions .....
New members (those with fewer than 10 posts) are not permitted to post to development-related forums.
Click to expand...
Click to collapse
So I cannot post there
Thx
This is a fairly square build for the sm-t230nt degaswifidtv qcom/msm8226
cm11_degaswifidtv-round2.zip
https://drive.google.com/file/d/0B9n_loxLasIVNnpVMV9BN21laUU/view?usp=sharing
bluetooth is not yet functioning.
My main interest in this excercise was to assemble working/workable sources to get development moving
for this device.
As of getting the recovery functioning correctly, all required is assembled to help any actual owner of this
device to begin taking it foward.
I will limit my effort in this to getting the bluetooth issue resolved,
and possibly getting dtv functions working.
Thank you @Erus Tyrannus for inquiring about recovery initially and testing this build and provding feedback to date.
Sources assembled in post 2
Sources
Kernel
SM-T230NT_LA_KK CAF
https://github.com/moonbutt74/kernel_samsung_degaswifidtv/tree/master
Device Tree
https://github.com/moonbutt74/device_samsung_degaswifidtv
Vendor Sources - need work
https://github.com/moonbutt74/vendor_samsung_degaswifidtv
Reserved
Reserved for updates
I am not accepting any requests.
This is not an app support thread.
This is not an Odin/Firmware support thread.
Thank you.
m
Awesome ty!!!
gammaxgoblin said:
Awesome ty!!!
Click to expand...
Click to collapse
G,
hi, you will want to edit build.prop to change screen density to 160
When i have an idea of what's wrong with bluetooth and get it sorted,
i will also adjust the next build for correct dpi setting.
m
Will this run on the 230nu?
I'll try it..
phonetec said:
I'll try it..
Click to expand...
Click to collapse
gammaxgoblin said:
Will this run on the 230nu?
Click to expand...
Click to collapse
Guys,
NOOOOO! don't do that. this is for a version of the galaxy tab 4 7.0 which is a qcom/msm device!
No one has managed a build yet for the sm-t230nu which is a Marvell device.
sorry
m
Damnit
And about DTV? It's working?
riclixo said:
And about DTV? It's working?
Click to expand...
Click to collapse
DTV is not implemented yet.
Any new's with BT ?
mario156090 said:
Any new's with BT ?
Click to expand...
Click to collapse
No, i don't own the device.
I established the resources to build, so now you guys need a developer in ownership of the device to get things moving.
i am moving out of rom building and going back to the kernel and some other things.
m
moonbutt74 said:
No, i don't own the device.
I established the resources to build, so now you guys need a developer in ownership of the device to get things moving.
i am moving out of rom building and going back to the kernel and some other things.
m
Click to expand...
Click to collapse
Ok friend, thank for your job and sorry for my bad english.
@moonbutt74:
Will this work on the SM-T230N version?
tablord said:
@moonbutt74:
Will this work on the SM-T230N version?
Click to expand...
Click to collapse
T,
i don't know, i don't own the device.
m
tablord said:
@moonbutt74:
Will this work on the SM-T230N version?
Click to expand...
Click to collapse
not work
Thread closed at OP's request
Which is the best Android nought rom for our oneplus 2 tell now i have seen many devs build but i am confused which is the best rom i want for daily use which rom has less bugs anyone tryed many build till now give me information about which is best build in lastest. Thanx in advance?
Jignesh_03 said:
Which is the best Android nought rom for our oneplus 2 tell now i have seen many devs build but i am confused which is the best rom i want for daily use which rom has less bugs anyone tryed many build till now give me information about which is best build in lastest. Thanx in advance?
Click to expand...
Click to collapse
Definitely Grarak's build is the best out there.
is it possible to open a thread with this title? Please be informed that there are many threads opened and just one..two threads below yours there is the main one! You will understand many things just reading it because is full of comments about the 7.0 builds. MAIN THREAD. Have a nice day.
eespanol said:
Definitely Grarak's build is the best out there.
Click to expand...
Click to collapse
here is the link
https://twitter.com/grarak
I remember when I was new on xda, I took time looking at the rules of this forum. But why do people no longer care for this?
eespanol said:
Definitely Grarak's build is the best out there.
Click to expand...
Click to collapse
Kk bro what bugs his rom has
Jo-san said:
is it possible to open a thread with this title? Please be informed that there are many threads opened and just one..two threads below yours there is the main one! You will understand many things just reading it because is full of comments about the 7.0 builds. MAIN THREAD. Have a nice day.
Click to expand...
Click to collapse
Kk srry bro..
Yousvel said:
I remember when I was new on xda, I took time looking at the rules of this forum. But why do people no longer care for this?
Click to expand...
Click to collapse
Hmm bro same here