BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Thx I will try it soon. But how come I can flash ics kp8 and lp2 roms
Are you using the new bootloader then?
That one Im not sure of but I have read on other threads that people have had to "repartition" their phones to be able to flash back from ICS.Not bieng on ICS I dont see why you cant as the Omega ROM was just themed.Im on the latest Omega and its 2.3.6. so 100% positive it wasnt ICS.Also Try stupid things like another com port.Happened to me once.The one I was using when I had an i9000 stopped letting me flash it via Odin when it reached the same stage every time I tried.Dont Know why.Just had to change ports.Try everything:
1.Full wipe and flash.....If that dont work then...
2.Flash F/W that works then change kernel and flash old bootloader(as mentioned above)never know,might work.
http://www.multiupload.com/LQQBRQVJUD
Flash it in PDA in Odin.
ALso you could try a program called "Fus Downloader"
http://fus.nanzen.se/
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
KevandLynds said:
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
Click to expand...
Click to collapse
True.Same thing happened to my mate.He has an i9000 and Odin stopped flashing his phone but only if he used a PIT file so I gave him my i9100 cable and it started flashing his phone again with PIT file selected.Weird how things work sometimes for no real reason.Anyway Nandroid backups are always a good call.could have saved some trouble the this case.Ive got a Nandroid backup on my phone and copied to DropBox thats months old but it would get me out of trouble if this sort of thing happened to me Even though its old as.Gotta have that saftey net.
zabihjan said:
BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Click to expand...
Click to collapse
Try flashing a Gignerbread bootloader using Odin
happel92 said:
Try flashing a Gignerbread bootloader using Odin
Click to expand...
Click to collapse
I will try it soon thx
Sent from my GT-I9100 using Tapatalk
JJEgan said:
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Click to expand...
Click to collapse
Tried dont work i can only flash ics roms
Sent from my GT-I9100 using Tapatalk
pulser_g2 said:
Are you using the new bootloader then?
Click to expand...
Click to collapse
Old bootloader as i can use my jig to clear counts
Sent from my GT-I9100 using Tapatalk
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Didnt work
Sent from my GT-I9100 using Tapatalk
Mate,thats a strange one alright.
Any luck yet.I was thinking that you might have to look for a package that has the older 4 file flash with pit.Its possible that maybe you need to repartition your device.Might be hard to find thought.
Related
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
i just bricked my phone with script manager,done something wrong.What can i do to unbrick?1 question,can i wipe data/factory reset and phone will be fixed?
What did you mean bricked? Can you turn you phone one, whats happened after this, I think you have only a bootloop. If you can access recovery menu try wipe, if it doesn't help reflash you rom using ODIN.
dragonnn said:
What did you mean bricked? Can you turn you phone one, whats happened after this, I think you have only a bootloop. If you can access recovery menu try wipe, if it doesn't help reflash you rom using ODIN.
Click to expand...
Click to collapse
when i turn phone on it shows me galaxy ace gt-5830 then it stops at a blank screen and i can acces in recovery so at least im happy its not a hard brick
Maybe go into recovery and try to flash your rom again, good luck
silvercrus1 said:
when i turn phone on it shows me galaxy ace gt-5830 then it stops at a blank screen and i can acces in recovery so at least im happy its not a hard brick
Click to expand...
Click to collapse
Your phone is not bricked. You have a minor inconvenience. Wipe everything and flash new firmware.
Sent from a phone with an app.
sdotmouse said:
Your phone is not bricked. You have a minor inconvenience. Wipe everything and flash new firmware.
Sent from a phone with an app.
Click to expand...
Click to collapse
if i factory reset/wipe data wouldnt it make the phone like the first time i bought it i mean with firmware and all?i need to flash a firmware again?
silvercrus1 said:
if i factory reset/wipe data wouldnt it make the phone like the first time i bought it i mean with firmware and all?i need to flash a firmware again?
Click to expand...
Click to collapse
Choose whatever rom you want and install as normal through recovery. Wipe data/cache/factory reset and install .zip file. Done.
Sent from a phone with an app.
sdotmouse said:
Choose whatever rom you want and install as normal through recovery. Wipe data/cache/factory reset and install .zip file. Done.
Sent from a phone with an app.
Click to expand...
Click to collapse
but all roms need KPH or KPN baseband and i have KP7.and i just wanted to factory reset and return back to stock
silvercrus1 said:
but all roms need KPH or KPN baseband and i have KP7.and i just wanted to factory reset and return back to stock
Click to expand...
Click to collapse
Just to make sure, flash it with a full package. (Zip containing 4 files instead of one big one). It'll turn everything to stock including system format just in case you messed that up. Flash it via ODIN and make sure to follow instructions so you won't have another inconvenience.
SuperAce609 said:
Just to make sure, flash it with a full package. (Zip containing 4 files instead of one big one). It'll turn everything to stock including system format just in case you messed that up. Flash it via ODIN and make sure to follow instructions so you won't have another inconvenience.
Click to expand...
Click to collapse
can you give me some guides on how to do that?i cant find any
up!!!!!!!!
iv been having a few issues as of late with my s2 so decided id just backup my numbers and media and wipe and start again, but when i do a factory reset, it shows an error mounting the sdcard/.android_secure
and then it skips it, can anyone tell me how to fix this problem so i can start a fresh with a nice clean and empty galaxy
What system do you have? ics or ginbread...?
Question = wrong forum.
....................................
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
my apologies, i havent used the forum much as the phone has been fine for about 6 months, its now on checkroms v6 which i managed to flash onto it with a bit of fiddling, thinking that may solve some of my issues but it didnt. thats when i noticed this error when doing a few resets.
JJEgan, gonna follow your steps now buddy, thanks and fingers crossed
its a no go, it wont let me format or mount the sdcard
try factory reset from phone menu,
try another kernel to get another version of CWM, eg: Siyah
hiya zac, well i have the phone in download mode connected to odin, im using the link in your sig, and downloading the stock firmare and kernal, will it matter if i didnt wipe the sdcard before flashing these two items with odin? surely i can do it after?
upto you to try.....
cant guarantee since dont know what weird problem has got with your SD card which
dont allow you to wipe,
you can also try flashing another custom kernel first,
When you flash a stock firmware it already contains a Kernel, no need to flash seperately..
any chance to a quick link to a kernal to try and a guide!
its been a while since iv done this! haha
which rom are you currently on?? ICS or GB
checkrom v6 i do believe
GB CWM flash : http://gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14-CWM.zip
Checkrom is GB version,
but makesure, from settings/about phone
i will bud, and i flash that kernal, with odin?
no this is CWM flashable, put on SDcard, and flash from CWM,
top man, off to have a go now
if CWM flash fails, you can try from ODIN
ODIN flash :http://gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14.tar
select the file from PDA of Odin,
Pugme said:
its a no go, it wont let me format or mount the sdcard
Click to expand...
Click to collapse
Unless you have a external sdcard, this problem is self explanatory!
Hi friends I was using stock firmware and recovery. I was wanted to use cm10.1. So when I went to recovery and tried to wipe data my phone took so much time it was not responding. After that I removed battery and tried to start the phone it was not starting only boot screen appearing. Than I again tried to wipe data through cwm recovery and the result was same. What can I do now???
Plz don't say that your android v is 4.04
sonimayurp said:
Hi friends I was using stock firmware and recovery. I was wanted to use cm10.1. So when I went to recovery and tried to wipe data my phone took so much time it was not responding. After that I removed battery and tried to start the phone it was not starting only boot screen appearing. Than I again tried to wipe data through cwm recovery and the result was same. What can I do now???
Click to expand...
Click to collapse
put ur phone into dwnld mode and flash a Stock ICS 4.0.3 (u can find one on www.sammobile.com) using PC odin
Sun90 said:
put ur phone into dwnld mode and flash a Stock ICS 4.0.3 (u can find one on www.sammobile.com) using PC odin
Click to expand...
Click to collapse
I've done the same bt phone is not starting. After flashing I again went to recovery and tried to wipe data bt its not happening
Hi guys.
My phone is a international i9300
I've been searching for a problem like mine in the forum for three weeks now and I couldn't find a proper solution.
I just can't flash any rom via CWM anymore...
I can flash roms via ODIN, but when it comes to CWM, it gets stucked at Samsung logo after the install.
I tried:
Wipe cache / Dalvik / factory reset.
before the installation, after the installation, every combination possible.
Tried megawipe and no help.
Changed the kernel, Siyah, Googy, stock...
Changed versions of CWM, touch.
I have now the Phil'z 5.0.15.
I like very much the XXELK4 version from roalex with its MOD, for the call recording and full multiwindow support, but can't flash it anymore, nor any other custom or stock via CWM.
By now I can only have a full stock flashed via odin, or my Omega 46.1, wich I have a full backup.
Another solution could be find a .tar rooted and with the MODS flashable via Odin, but I really wanted to understand what's happening with my recovery.
Thank you all and congrats for the great work with the forum.
In cwm format..
Data
System
Cache
Then go to advanced and wipe dalvik cache
Then flash the rom.
Your cwm is upto date?
andrewwright said:
In cwm format..
Data
System
Cache
Then go to advanced and wipe dalvik cache
Then flash the rom.
Your cwm is upto date?
Click to expand...
Click to collapse
Sorry.
Forgot to include in the original post... I tried that too. Formatted everything
Got the 6.0.6.3
I also tried with the last Philz recovery.
And with previous versions of both too.
Have you tried to go bk to stock,root that firmware then install cwm then flash custom rom? Clean slate start.
Your problem may be a bad file download .
andrewwright said:
Have you tried to go bk to stock,root that firmware then install cwm then flash custom rom? Clean slate start.
Click to expand...
Click to collapse
Yes... didn't work...
JJEgan said:
Your problem may be a bad file download .
Click to expand...
Click to collapse
I'll try to download again, although it's not likely that several files are bad. I tried with so many different roms...
I bought another micro sd of 64gb. Maybe the one I'm using is ruining the files...
There can't be a so huge bug in philz recovery
Try install from internal sdcard, a simple 'Factory Reset before New Rom' no need to mega wipe anything.
Striatum_bdr said:
There can't be a so huge bug in philz recovery
Try install from internal sdcard, a simple 'Factory Reset before New Rom' no need to mega wipe anything.
Click to expand...
Click to collapse
Of course. And I tried with different versions of Philz' and also CWM. It can't be a bug in recovery.
Re-downloaded the revolution 29.0 and the Roalex XXELK4 rooted, copyed directly to internal and flashed... Same problem. Stuck at Samsung logo in boot. I'm begining to think my phone is screwed up. But this is so strange. I can restore my backup with no problems, and also can flash with Odin.
Is there a way to flash a .ZIP ROM in Odin?
Does not make any sense .
What model phone do you have ???
What model firmware are you flashing .
What about basic stock custom roms flashed via CWM ??
Have you booted to Philz recovery mounts and storage format sd card cache system and data then flash rom ??
Agree it is strange Deviating a little from your problem but have you tried flashing anything with TWRP recovery see if the problem persists with that.
JJEgan said:
Does not make any sense .
What model phone do you have ???
What model firmware are you flashing .
What about basic stock custom roms flashed via CWM ??
Have you booted to Philz recovery mounts and storage format sd card cache system and data then flash rom ??
Click to expand...
Click to collapse
I know it doesn't. That's why I'm going crazy.
I uploaded the screenshots with my system specs.
The model is correct, international i9300. Tried to download from the site and also directly from rommanager.
The firmwares I'm trying to flash are stock, but rooted by Roalex. I couldn't find a pure stock .zip for testing with CWM. The firmware I'm using is UBEMH5 from sammobile, wich I flashed via Odin.
Yes... Tried and formatted everything, several times, mounted, unmounted, every possible order...
Almost giving up. :crying:
tallman43 said:
Agree it is strange Deviating a little from your problem but have you tried flashing anything with TWRP recovery see if the problem persists with that.
Click to expand...
Click to collapse
I never used TWRP. Can I flash the same ROM file .zip with it or it requires it's own rom file type?
I'm gonna be out of the country for two days. When I come back I'll give it a try.
Thank you all so far.
ivansaab said:
I never used TWRP. Can I flash the same ROM file .zip with it or it requires it's own rom file type?
I'm gonna be out of the country for two days. When I come back I'll give it a try.
Thank you all so far.
Click to expand...
Click to collapse
It's been a while since i used it last time was when I had a S2 and I used it all the time:good: You can flash any rom with it that cwm can flash (as far as I know) but it had a little trouble restoring backups made with cwm but I think that got fixed.But you can make backups and loads of other things with it I recommend people to try it at least once This won't fix your cwm problem but would be interesting to see if it works
If twrp doesn't work on stock Flash googy Max dualboot kernel and keep stock as primary rom and custom as second rom. Then you have best of both world's :thumbup: also take the pic down with your emei showing :banghead: never ever show this!
What i would do in this situation is .
In recovery format cache system sd card preload .
Flash stock rom via Odin.
Check phone works ok .
Then root / flash philz recovery .
Put custom rom on sd card boot to recovery factory reset .
Then install custom rom watching setup to spot a failure point .
Wait for rom to load 10 mins fails then remove batter replace and factory reset .
Problem solved
Hi folks.
Think I figured out what's going on.
Via TWRP it says the files were corrupted, although the file sizes were identical.
I MD5 checked the files in my computer and they're ok, but when checked already inside my phone or SD they're not.
Instead of copying the files via USB cable I removed the SD card and inserted directly in my laptop slot and copyed the files. MD5 checked and they're ok...
After I tryed again copy via USB and the files were corrupted again.
I think my desktop USB or maybe the Samsung drivers are doing that.
Well, problem solved. I hope this helps other people in future problems.
Thank you all for your help and support. Keep on with the great work.
Mark solved then for other users .