Related
Flashed stock bell phone & CSC via Odin. Now phone wont read my sim. Any advice?
iamerwin said:
Flashed stock bell phone & CSC via Odin. Now phone wont read my sim. Any advice?
Click to expand...
Click to collapse
Check your /efs folder or reflash radio ..
forgive me, complete sgsii newb. kind enough to share?
Dude, seaech for it. Dont just go poking your head round for this. And you dont know what flashing a radio means?
Sry but u shudnt have rooted, ul probably brick ur fone if u go by this.
Best bet do some research before trying something
Sent from my HTC Desire using XDA App
My appoliges sir. i have some knowledge of flashing radios, coming from a Nexus S. Just getting a feel for Odin process. Thanks anyways for your time.
reidar.ostrem said:
Check your /efs folder or reflash radio ..
Click to expand...
Click to collapse
Thanks for your advice!
Checked the Efs folder, everything is there.
Tried reflashing original bell phone & csc + kernel again.
Cant seem to figure it out
hello guys..^_^
how are you.. I hope all things are good with you ^_^
actually I have a problem with my GS2
first thing I want to tell that I had decided to change my rom from odex to deodex one..
I had looking for a good one amd I found that Gangsbread is the best..but it doesn't work with my rom which is JPKF2 so that I had to change it to XXKH3 " a raw rom".. so I downloaded it and tried to flash it on my phone but it didn't work..
and I tried to switch my GS2 on but it doesn't work
I've downloaded the JPKF3 raw rom and tried to flash it.. and this what happened to me every time I tried to did it "the pics is within the attached files"~_~
I did with a different roms wuth a count of 33 but it doesn't success.. *_*
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
please can I do anything to fix it ?
thanks for your time
You've put kernel on bootloader option?
You were supposed to download a .tar file, select it on PDA and flash, no re-partition
dandroid13 said:
You've put kernel on bootloader option?
You were supposed to download a .tar file, select it on PDA and flash, no re-partition
Click to expand...
Click to collapse
thanks for your support dandroid13
probably someone taught me to do like that *_*
actually I did with no benefit..I think boot screen won't work..
do I have to insatlll a new boot screen ؟
I have a raw rom and this are the files come within (attached pic)
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
thanks
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
Do not listen to that person .
Gangsbread never heard of that one .
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
DID YOU .
You can try flashing a stock rom via .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
But follow the instructions to the letter .
jje
JJEgan said:
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
Do not listen to that person .
Gangsbread never heard of that one .
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
DID YOU .
You can try flashing a stock rom via .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
But follow the instructions to the letter .
jje
Click to expand...
Click to collapse
Thanks JJEgan
atually I did and this is what happened agian and again *_*
see the attachment please
No idea go to the forum thats giving you this rom and ask there is all i can suggest .I dont have a clue what you are doing installing nadmack .
jje
Get a rom from the forums on XDA, these roms work. Damn, I think you f'd your phone.
@asad4334:
Just a wild guess.. Did you killed all KIES procesess from TaskManager before you start ODIN?
asad4334 said:
Thanks JJEgan
atually I did and this is what happened agian and again *_*
see the attachment please
Click to expand...
Click to collapse
Asad4334 did you actually read the thread that JJ asked you to do. I would stop trying to use the files you download and get your stock rom for your phone and reflash that so you are back to the state when your phone was working. Those other files do not even look like GS2 firmware or kernel files.
Thanks JJEgan I won't trust that forum anymore..
prodygee
Get a rom from the forums on XDA, these roms work. Damn, I think you f'd your phone.
Click to expand...
Click to collapse
I did and nothing work -_-"
yooyo3d
Just a wild guess.. Did you killed all KIES procesess from TaskManager before you start ODIN?
Click to expand...
Click to collapse
actually I turned the kies off and I thought there were no working process after I stocked with my problem I checked the process and it was there and I had killed it and tried again and nothing work ~_~
dragon546
Asad4334 did you actually read the thread that JJ asked you to do. I would stop trying to use the files you download and get your stock rom for your phone and reflash that so you are back to the state when your phone was working. Those other files do not even look like GS2 firmware or kernel files.
Click to expand...
Click to collapse
Actually when I bought my phone I rooted it by the way that Intratech explained and it worked with me ^_^
my stock rom is JPKF2 and I don't know if I can find it or not I've tried this Stock rom (see the attached photos) and it doesn't work with my phone
really thanks guys for your support
oh my god I think I have crashed my phone's system -_-
asad4334 said:
Thanks JJEgan I won't trust that forum anymore..
prodygee
I did and nothing work -_-"
yooyo3d
actually I turned the kies off and I thought there were no working process after I stocked with my problem I checked the process and it was there and I had killed it and tried again and nothing work ~_~
dragon546
Actually when I bought my phone I rooted it by the way that Intratech explained and it worked with me ^_^
my stock rom is JPKF2 and I don't know if I can find it or not I've tried this Stock rom (see the attached photos) and it doesn't work with my phone
really thanks guys for your support
oh my god I think I have crashed my phone's system -_-
Click to expand...
Click to collapse
Hmm Asad I think the files you initially used may right royally screwed your phone. They look like they were SGS1 phone files. If they were then I think your phone will require JTAG repair.
Let's hope there are more people with better knowledge can help you.
dragon546 said:
Hmm Asad I think the files you initially used may right royally screwed your phone. They look like they were SGS1 phone files. If they were then I think your phone will require JTAG repair.
Let's hope there are more people with better knowledge can help you.
Click to expand...
Click to collapse
I don't know if it did..I've tried 44 times with different roms but what I'm sure the files is for GSII you can see the picture which I depend on to change the room..
and here is a picture for the deodexed rom that I wanted -_-"
Why are you still selecting repartition? DO NOT !!
Sent from my GT-I9100 using xda premium
UpInTheAir said:
Why are you still selecting repartition? DO NOT !!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
no no this is not me..this is from the forum which explained to me how to change my rom.. I would hit that person on his head for his explanation -_-"
asad4334 said:
I don't know if it did..I've tried 44 times with different roms but what I'm sure the files is for GSII you can see the picture which I depend on to change the room..
and here is a picture for the deodexed rom that I wanted -_-"
Click to expand...
Click to collapse
I think you can forget about the Deodexed Rom for now. You need to get back to stock. Looking at the pics you submitted. You may end up having to go Service Centre and have it Repaired. Be prepared to pay for the repair as well.
dragon546 said:
I think you can forget about the Deodexed Rom for now. You need to get back to stock. Looking at the pics you submitted. You may end up having to go Service Centre and have it Repaired. Be prepared to pay for the repair as well.
Click to expand...
Click to collapse
yea I think so..I'm going to it after the work -_-"
Issue solved thank you guys.. now my phone is running CyanogenMod Nightly ^_^
Out of curiosity, How exactly was the problem solved? Thanks
Sent from my GT-I9100 using xda premium
JJEgan said:
the same person told me to use the kernel file with the bootloader and now my phone doesn't work *_*
Do not listen to that person .
Gangsbread never heard of that one .
and now I have a message on my GS2 screen saying that..“Firmware upgrade encountered an issue. please select recovery mode in kies & try again”
DID YOU .
You can try flashing a stock rom via .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
But follow the instructions to the letter .
jje
Click to expand...
Click to collapse
Can you post his name? Whoever told you to do that needs to ****ing get banned.
And ridiculed for being so ****ing stupid.
i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
QNBT said:
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
Click to expand...
Click to collapse
thanks a lot i just want to share this information with some people and solve many questions
squallo37 said:
i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
Click to expand...
Click to collapse
Ace break by rom manager
not know about odin if choose wrong files in wrong option as not tried yet but if i'm not wrong if you choose wrong files md5 sum not gonna correct so it shows error and not let you to flash if you choose wrong option
nims11 said:
Ace break by rom manager
Click to expand...
Click to collapse
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Samsung S5830 brick problem
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Click to expand...
Click to collapse
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
EmoBoiix3 said:
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
What it works????
I already beicked my phone in two week after buy cause that crap app
i not think it work on your phone well
may be its now supported or something thats why you use
im happy with cwm app
---------- Post added at 10:56 AM ---------- Previous post was at 10:54 AM ----------
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Go to samsung service centre
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Try a different kohm ?
Forever living in my Galaxy Ace using XDA App
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
Only way to get it fixed is by changing the mother board..experienced the same a few months ago..
Sent from my GT-S5830 using Tapatalk
I m also using galaxy ace but nothing seems to me like that, it is working properly for me.
i hav rooted my samsung galaxy s2 gt-i9100g to update it ICS through odin3 . but unfortunately in odin it came fail... so i disconnected it removed the battery and put it again and started restarting the phone but to my badluck there's dat symbol comin in the middle of the phone that is phone caution symbol and pc. i cant understand wat to do. i m a nooob so plz help me out i cant send it to warranty as well because i have rooted it wid custom rom. if there is a way for me to get it back to stock plz help me out!!!
ICS? are you sure the rom was for 'G' version only? Are you able to enter download mode?
no problem just flash any stock firmware
connect to pc via usb and flash
The thing is i cant get it to download mode at all. whenever i try connecting it to my lappy i get that mobile,caution and pc symbom. i dont even know if it is charging also. so how can i get it into download mode?
hey konetibharath
that symbol means forced download mode so just get any stock rom and flash it for your i9100g.remember if you connect your moblie to pc when it is on and shows that symbol,odin will detect your phone and just flash stock rom.and be thankful that odin failed at flashing if it didnt you would have hard bricked your device.never try and flash i9100 roms on i9100g.and last thing there is NO ics update for i9100g.be careful when flashing roms,make sure that the rom you are flashing is for your device.
konetibharath said:
i hav rooted my samsung galaxy s2 gt-i9100g to update it ICS through odin3 . but unfortunately in odin it came fail... so i disconnected it removed the battery and put it again and started restarting the phone but to my badluck there's dat symbol comin in the middle of the phone that is phone caution symbol and pc. i cant understand wat to do. i m a nooob so plz help me out i cant send it to warranty as well because i have rooted it wid custom rom. if there is a way for me to get it back to stock plz help me out!!!
Click to expand...
Click to collapse
Dude, you want to post crap like this put it in general or Q&A, This section is for posting of developments and reference only. All your questions have already been answered and you would find the info if you just bothered to use search or browse through topics.
Asking questions like "how do I enter download mode" is just ridiculous.
Reported , sick of seeing this crap in last post box!
TheATHEiST said:
Dude, you want to post crap like this put it in general or Q&A, This section is for posting of developments and reference only. All your questions have already been answered and you would find the info if you just bothered to use search or browse through topics.
Asking questions like "how do I enter download mode" is just ridiculous.
Reported , sick of seeing this crap in last post box!
Click to expand...
Click to collapse
Be nicely my friends.. They are newbie...
Sent from my GT-I9100G using XDA
oldpistol said:
Be nicely my friends.. They are newbie...
Sent from my GT-I9100G using XDA
Click to expand...
Click to collapse
Obviously, and also that is no excuse and you kind of miss the point.
sry for being a newbie.. but here is tha last question of mine where can i get sgs2 official ROM of INDIA. can anyone be kind enough to send me the link plz... if it is mediafire its much appreciable
Very easy solution!
konetibharath said:
sry for being a newbie.. but here is tha last question of mine where can i get sgs2 official ROM of INDIA. can anyone be kind enough to send me the link plz... if it is mediafire its much appreciable
Click to expand...
Click to collapse
JUST flash any kernel! its very simple solution!,flash any kernel through odin (you dont need to go to download mode) i had the same problem and the same model
and got it fixed ! ,just flash any kernel through odin ,by clicking on pda and selecting kernel file ,and if it dosenot work then i think i will post link for official rom for i9100g
Today i`ve got a new galaxy s2 , white one now heh , after hardbricking the last one , one week ago...aaand ofc i cant help myself but to try and root it again. Now , i have found this site http://www.unlockroot.com/unlockroot.html and downloaded that program and everything .. the question is , is this safe to use ? No hardbrick on it ? What do you guys think ?
Ooor can someone show me a 100% safe way to do it ? I dont wanna kill another phone lol and now im kinda scared to just try anything i find D:
There are hundreds of threads about rooting your phone on xda, so why are you posting about using another method on a different site.
Maybe you could send a PM to theathiest and ask him to flash that on his phone to find out if it works/is safe. ........LOL
Maybe because i have ****ed up an sg2 before trying to install something from this site and now i want it to be 100% safe ? Anywayz , apparently im on the 4.0.3 version and that seems to be hardbrick free right ? If thats the case , that means i can root the phone using any method ?
Mate just flash syiah 4.0+ or dorimanx 5.92 via Odin and u get root or just update to jb via kies or download and flash via Odin then root u got few kernels for jb with root and jb is brick bug free kernels too good luck
Sent from my GT-I9100 using xda premium
You know what's the best way to avoid bricks?
It's starts with a "B" and it ends with "y reading the forum"
Y don't touch phone that's best way wot do u mean by that starts b finish y ? Look mate if u went avoid brick bug jut update to jb its bug free then use philz kernel its stock to root and voila u got bug free jb with root and u can sleep safe or after flash custom ROM rest info u find somewhere here
Sent from my GT-I9100 using xda premium
Don't repeat your mistakes again - learn to understand what you're doing before doing anything risky on you new phone. No one can prevent you from bricking it, only you can, by knowing what you're doing.
Sent from my digital submersible hovercraft.
That's way before u do anything learn how to do u know that that's best way u know since first day I got my s2 I root and went custom and from that day I read to learn before I do that's best way to avoid problems
Sent from my GT-I9100 using xda premium
Just use a "safe" Kernel and everthings okay. But check if the Kernel is the right one for your Firmware Version...
Aight , thanks for the feedback guys , i`ll think about rooting it again , keeping in mind that the official 4.1.2 its gonna come soon and it will pawn , so i guess i wont need root and a custom rom ... maybe only for deleting those god damn stock apps.
It is almost impossible to brick your phone if you stay away from .pit files and ticking re-partition in odin.
Lennyz1988 said:
It is almost impossible to brick your phone if you stay away from .pit files and ticking re-partition in odin.
Click to expand...
Click to collapse
And don't ever disconnect the cable while flashing.
Sent from my digital submersible hovercraft.
One last question guys , im from Romania , if i use lets say , the Russian Jellybeam version will it really matter ? I mean will it be any difference between the Russian one and actually waiting for the update in my country ?
it'll work just fine, it's not about the firmware, it's about modems.
You got people from brazil flashing russian jelly bean and they do just fine.
Sent from the little guy
Aight , thanks alot , i shall do that then !
Aight & shall used in the same sentence....London meets L.A.
Sent from the little guy
Yea , i like diversity lol