[Q] angled usb connector for charging - Barnes & Noble Nook Tablet

As the stock USB cable just sucks when using the nook in portrait view while charging... is there a cable with an angled mini USB connector that can be used to charge the device (at full current)?

I have bought several off of ebay, some real cheap and only worked a couple of times and some that were inexpensive that are pretty good quality. I bought a couple of right angle and left angle from a seller (tigerdirect) and they have worked out well for me. I would also like to note that mini usb to micro usb adapters do not work for the nook.

Links?
Sent via XDA Premium, Nook Tablet

http://www.ebay.com/itm/Cables-Go-Right-Angle-USB-2-0-A-Micro-B-Cable-USB-/350524636347?pt=LH_DefaultDomain_0&hash=item519ce57cbb
http://www.ebay.com/itm/6FT-USB-MICROUSB-B-/350517524453?pt=LH_DefaultDomain_0&hash=item519c78f7e5
http://www.ebay.com/itm/6FT-USB-LEFT-ANGLE-MICRO-B-/320818032477?pt=LH_DefaultDomain_0&hash=item4ab23eaf5d
This is a huge cable seller on ebay. Kind of hard to navigate through all the choices there are. I think they have over 45,000 items on ebay.

will these quick charge or slow?

Wurstwarenfachverkäuferin said:
As the stock USB cable just sucks when using the nook in portrait view while charging... is there a cable with an angled mini USB connector that can be used to charge the device (at full current)?
Click to expand...
Click to collapse
I feel that I should note, when I plug the charger for my Droid 3 into my nook, it does charge. It doesn't show as charging though. Under settings it actually specified NOT charging, but it charges none the less.
The cable for my droid is NOT angled, but this indicates that they are universal. Just a bit of related information

I was mainly concerned about the ability to charge the NT at full current* with a replacement cable (and an angled one, of course). However, the angled micro USB plugs I've seen so far, are still quite long and I wouldn't want to rest the NT on them while reading in portrait view. Now I am kind of curious if one could mod a separate charging jack into the device overcoming the major design flaw of USB charging...
*which, as indicated somewhere in the NT-cable-thread, could be a special feature of the proprietary design of the NT cable (though not sure either if that proprietarity goes for both sides the full sized and the micro USB)

Wurstwarenfachverkäuferin said:
I was mainly concerned about the ability to charge the NT at full current* with a replacement cable (and an angled one, of course). However, the angled micro USB plugs I've seen so far, are still quite long and I wouldn't want to rest the NT on them while reading in portrait view. Now I am kind of curious if one could mod a separate charging jack into the device overcoming the major design flaw of USB charging...
*which, as indicated somewhere in the NT-cable-thread, could be a special feature of the proprietary design of the NT cable (though not sure either if that proprietarity goes for both sides the full sized and the micro USB)
Click to expand...
Click to collapse
The stock cable has special circuitry and a longer 12 pin microusb end. It is the only way currently to get full high amp charging...any standard microusb will be limited to 500mA...standard USB charge limits. The only "special" thing about the stock brick is that the data pins are fully shorted.
Sent from my NookColor using xda premium

Related

confused about USB cable

it seems that some people on the forum say they have a standard micro USB connector on the Flyer??? and most of the ebay sellers list standard micro usb products for the HTC Flyer
MY connection is a proprietary one - it looks like a micro usb but has a 'step' in it
like this one...zoom in on the picture
http://www.expansys.com.au/htc-flyer-data-cable-dc-t500-extmicro-usb-12pin-white-209995/
wtf is going on?
Try it, you will like it, except for charging.............
try what? what will i like? what about the charging?
off the shelf micro usb works fine.
The proprietary style is only for charging
If u have a micro usb cable then u have to put it in the opposite way. Like this
Sent from my PG86100 using XDA Premium App
It's a generic micro USB connection. The extra's is just that, extra. And not mandatory. I read somewhere (could be here, could be somewhere else) that they made the different connector so you wouldn't use the charger on a device that can't handle the power. But you can use any micro USB cable to connect the device to your PC. And you can even use any micro USB charger, but you'll need a lot of patience as it'll take a long, long time!
While you can use a standard micro USB cable, I have heard it would be better to use the HTC one because it will stay in better. I have used a standard one just fine, but the HTC one does hold in better IMO.
vj092887 said:
If u have a micro usb cable then u have to put it in the opposite way. Like this
Click to expand...
Click to collapse
Its both proprietary AND standard. As vj092887 said, you insert the micro-USB male plug "upside-down" from how you would on most HTC devices. And it plugs into the "bottom half" of the jack. All this is in respect to the tablet laying flat, with the screen facing up.
If you use the included charger or sync cable, it takes up the "whole" jack. Sync doesn't really make a difference. But the included charger is much faster than standard HTC Micro-USB chargers.
jeebus on a swizzle stick, only after reading this did i actually shove a standard micro usb into it and i'll be damned.....
thanks guys
n7of9 said:
jeebus on a swizzle stick, only after reading this did i actually shove a standard micro usb into it and i'll be damned.....
thanks guys
Click to expand...
Click to collapse
Shortly after I got my Flyer, I was at work and wanted to connect it to my laptop. And realized I had left my (HTC) cable at home, sticking in my PC there. I was also kind of disappointed as I had bought the flyer specifically because you could use a micro USB cable!
So, I thought, well, why not try it and see if it fits. And as I generally always first try to stick a cable in upside down (don't ask me why, even if I think about it, I'll try it upside down first ), I got lucky this time and found it fitted
Sweetpea8472 said:
Shortly after I got my Flyer, I was at work and wanted to connect it to my laptop. And realized I had left my (HTC) cable at home, sticking in my PC there. I was also kind of disappointed as I had bought the flyer specifically because you could use a micro USB cable!
So, I thought, well, why not try it and see if it fits. And as I generally always first try to stick a cable in upside down (don't ask me why, even if I think about it, I'll try it upside down first ), I got lucky this time and found it fitted
Click to expand...
Click to collapse
USB cables tend to go in the right way on the third try!
Sweetpea8472 said:
And as I generally always first try to stick a cable in upside down (don't ask me why, even if I think about it, I'll try it upside down first ),
Click to expand...
Click to collapse
i NEVER put in cables upside down (because i always put a little dot on the top side of the connector using nail polish...you can use liquid paper for a more 'manly' experience)
Is there a source for an innexpensive extra cable? I've been using a standard micro USB and it works but feels very loose compared to the official HTC cable that came with my flyer.
Sent from my Transformer TF101 using Tapatalk
If you mean with a HTC style power connector, no, that's for charging only. For data cables Ebay or Amazon has them for about $1 each.
DigitalMD said:
If you mean with a HTC style power connector, no, that's for charging only. For data cables Ebay or Amazon has them for about $1 each.
Click to expand...
Click to collapse
I wouldnt buy those generic cables from ebay/amazon etc they are poorly made and can either break off in your device, break off the connector on the device, or short out.. I highly recommend getting either Motorola or HTC OEM cables. They cost $2 - $5 but its worth it.
http://www.amazon.com/Motorola-SKN5...1?s=electronics&ie=UTF8&qid=1323629211&sr=1-1
Does this mean that the MHL adapter with 5 pins will work (standard Micro USB), and I don't need the 12 pin MHL version (extMicro USB)?
galfert said:
Does this mean that the MHL adapter with 5 pins will work (standard Micro USB), and I don't need the 12 pin MHL version (extMicro USB)?
Click to expand...
Click to collapse
yes! but apparently it charges really slowly so microUSB is best left to data transfer only
str8upx said:
I wouldnt buy those generic cables from ebay/amazon etc they are poorly made and can either break off in your device, break off the connector on the device, or short out.. I highly recommend getting either Motorola or HTC OEM cables. They cost $2 - $5 but its worth it.
http://www.amazon.com/Motorola-SKN5...1?s=electronics&ie=UTF8&qid=1323629211&sr=1-1
Click to expand...
Click to collapse
Perhaps I wasn't clear enough. Although a standard micro USB connector works for me when transferring data I don't like how loose it seems in the Flyer's socket. So I want another cable just like the one that came with my Flyer, a micro ExtUSB cable. I've only found mini ExtUSB cables not micro ones, hence my request for an inexpensive cable source.
Sent from my Transformer TF101 using Tapatalk
bsoplinger said:
Perhaps I wasn't clear enough. Although a standard micro USB connector works for me when transferring data I don't like how loose it seems in the Flyer's socket. So I want another cable just like the one that came with my Flyer, a micro ExtUSB cable. I've only found mini ExtUSB cables not micro ones, hence my request for an inexpensive cable source.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
there are no inexpensive extUSB cables...i don't know where you are but try expansys or amazon in your country...they're all upwards of $20
There is no 3rd party source for the non-standard HTC proprietary connector.
HTC manufactured Windows Mobile and Android-based devices have a proprietary connector called HTC Micro ExtUSB (Extended USB). ExtUSB combines Micro-USB (with which it is backwards-compatible) with audio input as well as audio and video output in an 11-pin connector. The extra pins also allow for higher charging currents.
If you really want to spend on a high quality cable, here you go, the best, most expensive per foot USB micro cable in the world . For ~$25 this should keep your Flyer and small pets from bursting into flame............
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4256657&CatId=77
By the way, all the generic or other brand MHL adapters work fine with the HTC for connection to HDMI.

be careful with your charger cables!

not sure if this justifies a topic of its own but i have kind of wrecked my hp charger cable by using it to charge my phone
i can only assume that the socket on my htc incredible S is tighter or something because the micro usb end wiggles around so much in my touchpad now it doesnt maintain a connection unless i apply pressure in a certain direction!
so just to let you all know, its probably best to keep your hp cable for your touchpad!
Why would you put it in your phone in the first place? They require different amount of power (tl;dr: you could have fried it).
Varemenos said:
Why would you put it in your phone in the first place? They require different amount of power (tl;dr: you could have fried it).
Click to expand...
Click to collapse
huh? the device only pulls as much as much power as it wants
and it only pulls 2amps when the touchpad detects the right amount of resistance
he is talking bout the cable and actually it might be the "teeth" on the micro usb being lower than it should, i basically have gone thru 4 cables because they wont stay in the right place not only because they are recessed (which i have pulled back into place but because there is a crack on the usb port..
darkassain said:
huh? the device only pulls as much as much power as it wants
and it only pulls 2amps when the touchpad detects the right amount of resistance
he is talking bout the cable and actually it might be the "teeth" on the micro usb being lower than it should, i basically have gone thru 4 cables because they wont stay in the right place not only because they are recessed (which i have pulled back into place but because there is a crack on the usb port..
Click to expand...
Click to collapse
I hate micro USB, such a flimsy design.
Basically some of the male ends are a micrometer thicker, causing the female end to stretch.
At least with TouchPad, you can get an inductive charger.
wonshikee said:
I hate micro USB, such a flimsy design.
Basically some of the male ends are a micrometer thicker, causing the female end to stretch.
At least with TouchPad, you can get an inductive charger.
Click to expand...
Click to collapse
cant argue with that totally agree with the touchstone, oh if the tp was able to pull 2 amps that way though..
Varemenos said:
Why would you put it in your phone in the first place? They require different amount of power (tl;dr: you could have fried it).
Click to expand...
Click to collapse
A switching mode power supply (pretty much all newer chargers) will put out its rated voltage as long as the current draw is equal to or less than its max spec. There is a slight variation between chargers output voltage but a few tenths of a volt won't do any damage.
I have charged all sorts of devices using the TP charger without issue. My Sansa Clip using a miniUSB cord, my Droid 3 using the HP cord. The microUSB plug is a standard so ports should be the same on all devices, but I really like miniUSB better. It seems like a more robust connection than micro which feels too small and flimsy.
My charger has a usb socket so I was able to swap out the micro usb charger - can you not do that?
Sent from my R800i using XDA App
oh yea, obv i can just change the cable, and quite cheaply, but was just letting people know that the slot on the touchpad must be quite big relative to other devices (though i can only vouch for my incredible S).
i'll have to buy a new cable now, though - no biggy
Sand down those spiked nibs that are supposed to hold the cable in place, they are too big to be needed and cause extra wear and tear on the units usb socket.
Taking them down to about 50% size and making them not so sharp gives the cable a good fit where it wont come out easy but its not like pulling teeth.
I learned this with my N900 lots of users did it, and now I noticed the touchpad had the same kind of fit and cable, so I consider this a necessity if you want to prolong the life of your device and minimize the possibility of something happening like what happened to the OP, atleast for him it was the cable that gave out and not the micro sub port on his TP.
my cable stopped working a while ago so im just using my samsung and htc cable,samsung cable is a real nice fit better than the TP one.
The supplied TP cable is just a flimsy POS. I've bought dollar store cables that were higher quality.
I use the TP charger and the cable that came with my phone to charge both devices. I've been doing it for months with no ill effects to the phone.
Sent from my LG-P925 using Tapatalk
Micro USB is a horrid and fragile setup to begin with.
Sent from my SGH-T989 using XDA App
yup my usb cable doesnt work anymore. I accidentally tripped over it lol
LOL good thing i bought 3 HP touchpad chargers over the weekend.
I actually lost the stock one.. so i 'stocked' up... just in case
Just FYI, the default AC adapter that comes with the TP has two parts.
The front part rotates to separate it from the base, if it's rotated a bit - it won't charge, so double check that the front (where the prongs are) are tightened properly.
Mine's developed the same fault using it on my Galaxy S2, it's now loose on all devices and I had to throw it away. I just think the quality's poor.
The HP cable for my TP stopped charging the device too, got in touch with support and a day later I received a shiny new replacement cable which *isn't* loose
Sent from my GT-I9100 using xda premium
my usb cable stopped working too (yesterday).
Well, it works but i need to hold the cable in a particular way or it stops.
Did any of you buy a replacement? if ya which one.
Hmmm, I got the touchstone and haven't used the USB since, unless plugging in to the computer to move an update.zip over. Still tight fit, and with rom I'm running touchstone seems to charge the same as the actual charger that came with touchpad.
It is actually a fact that the stock USB cables are of poor quality. So ultimately its not your fault if it goes bad. Just use another micro USB cable (even cheap ones you find at the convenience stores works great) to charge your touchpad. I've been using my micro USB which came with my phone to charge my touchpad and I must say its a perfect fit for the touchpad.

Anyone ever see extmicro usb to usb a cables

Trying to find out if there is such a thing as going from extmicro usb that the evo and flyer have to a usb type A (or any other normal usb).
Need a right angle to plug into tablet for car install and found that I can fit a microb angled cable into the tablet, but now need to take the car charges extusb and get an adapter to hook it all together.
You can just buy a regular micro USB extended cable. It fits in the flyer/view charge port.
Proprietary cable is the one on the right. Regular micro USB on left.
I am installing the tablet in dash of a car.
I have the oem car charger because its only one with right voltage. But I need a angled usb for clearance issues. So im trying to figure a way to go from the charger EXTMICRO usb to the angled usb.
Searched around and have come up completely empty.
I'm working on the same project and found this thread searching (again) for more info on extusb. The solution I came up with for getting enough clearance to use the port requires disassembly and if you plan on keeping the warranty, it's probably not a good option for you.
Anyway, my solution was to make some small right-angle brackets for the pcb that contains the extusb port. It requires material for the angle brackets and two small screws with nuts. See attached for a better idea.
I actually got the tablet installed and fairly well, but have since removed it to come up with better designs for charging, access to the power button (and possibly volume buttons) for recovery actions, turning the screen on/off with ignition, and potentially microphone relocation.
You may want to check out http://www.dealextreme.com/ for right-angle and other adapters if you don't want to open up the tablet.
PS: Protect that screen. The plastic is very soft and will easily scratch.
I don't follow.
I thought the HTC car charger was a plug with a USB port in it just like all the others. I thought this might help, but I probably have no idea what you're really looking for
http://www.amazon.com/Cables-Go-Right-Angled-Micro/dp/B005EV2LAM
If you *need* to use the 12pin micro usb that the view has (which from my understanding was only there for the docking station utility), then you might be out of luck unless you can build something yourself.
Im looking for a cable like you linked to, but then I need a way to connect the flyers car charger special usb tip into it. Only way I can think of is to carefully grind the corners so that it will fit into a micro B female connection.
But the chargers are not cheap and if I F*** it up Im out $30
On a kia soul forum where others are planning on doing the same install with the flyer, one guy has come accross a company that makes custom cables. He said that if We send the car charger to them they will replace the usb tip with a micro B 90 degree angle for $25.
So A person is sending the charger to them to have it done and is going to let us know how it comes out.
jacobbones, can you provide a link to the kia soul flyer thread?
Yes, here it is.
http://www.soulhamsters.com/forum/i...ale-again-24feb-7-android-tablet-199-shipped/
Talk about the custom job is near the end of the posts
opening up the car charger and replacing the cable is incredibly simple. I have done it so many times, I can probably do it blindfolded. I actually had to go and replace the OEM chargers cable with the USB cable that it came with because my damn dog chewed threw the charger cable. Didn't come back very pretty, but it works, that charger has got the be the best charger built I have ever seen, incredibly difficult to open, but I'm sure the car charger is a lot easier to open, you just need a soldering gun and it should be easy.
Sent from my ADR6425LVW using xda premium

[Q] Rezound Cable

Hi All,
I ended up purchasing the Rezond based on the previous feedback, but I'm still in the test-drive phase. I'm really enjoying the phone so far and so far I'm thinking "keep". The included headphones are really great also compared to my previous headphones! I'll be waiting at least another week before I decide to keep the phone and decide to put a better ROM on the phone.
Anyway, what's the deal with the charge cable? Standard Micro-USB fits fine, but what's up with the funky cable that came with the device? Will this cause any problems using a longer standard cable or will it cause the phone to charge slower? Does this cable need to be used for proper connection to a PC?
Custom cables always make me leery.
Sorry if this has been asked, searching for custom usb, charge cable, custom cable did not return an results.
Its actually not a custom cable. It is a MHL adapter. Lots of talk about it in the Accessories forum.
Basically one port for charging and HDMI out instead of two separate ports.
You can charge fine with a regular micro usb cable, I don't think it's slower but I've never timed it.
If you want to get more like the ones that came with the phone you can get the HTC Flyer cables in white here:
http://www.expansys-usa.com/htc-flyer-data-cable-dc-t500-extmicro-usb-12pin-white-209995/
I bought two of them since I like the secure feeling of the snap in.
I've never tried using a regular micro usb for data and don't have one within arm's reach and I'm really super comfy right now so I'm not going to get up but I don't see why it wouldn't work.
In the accessories forum try searching "mhl cable" and I think you'll come up with two threads about it if you want further info.
I am using a blackberry (micro USB) cable at work, and the OEM cable at home, I see no different in charge time or PC connectivity between the 2 cable.
I also use a blackberry AC adapter to charge the rezound when I am in a pinch.
HTH.
Thanks.
I figured any standard micro-usb cable will work. A MHL cable makes sense though, I've just never actually seen one and I'm not familiar with the form factor.
I'll be looking into this, thank you again.
"MHL" A Lot More Solid
The MHL cable feels a lot more solid than a micro USB. I have a couple micro usb that have gotten loose, and now just fall out of the phone if turned over, or if I hit a bump in the car. Thanks for finding a source to buy more of the MHL cables.
Also here slightly less expensive.
http://www.amazon.com/HTC-Flyer-Data-Sync-Cable/dp/B004VF616C/ref=sr_1_2?s=electronics
krelvinaz said:
Also here slightly less expensive.
http://www.amazon.com/HTC-Flyer-Data-Sync-Cable/dp/B004VF616C/ref=sr_1_2?s=electronics
Click to expand...
Click to collapse
How long are those cables? Doesn't say on the page; unless I'm blind.
There is no such thing as an "MHL cable".
The format of the port and cable that come with the Rezound is called "EXTMicro USB".
"MHL" refers to a standard for connecting small electronics to HDTVs. It works with a regular Micro USB cable. Last time I checked (a couple of weeks ago) there are no MHL adapters that utilize EXTMicro USB connectors. Most of the ones that I've found use a regular Micro USB connector.
At this time, it's unclear exactly what the extra 7 pins in the connector in this phone are for. Other HTC phones have used them for analog audio and video output, but this doesn't appear to be supported by the rezound.
If you look at your rezound, you will see it only has the 5 pins. It does utilize the ExtMicro USB plug end/shape. If it truly had the ExtMico USB then while using the mhl adapter it could charge your phone via A/C while streaming. But it can't because the data pins are being used/ there are only 5 pins.
Sent from my ADR6425LVW using xda premium
That's an excellent point about charging while using an MHL adapter. One could still force fast charging through software, such as what's available in Incredikernel/control, though.
On my rezound, I most definitely have contacts in the extra spots. The cable my phone came with, however, doesn't have any pins for them to contact.
Prefader said:
That's an excellent point about charging while using an MHL adapter. One could still force fast charging through software, such as what's available in Incredikernel/control, though.
On my rezound, I most definitely have contacts in the extra spots. The cable my phone came with, however, doesn't have any pins for them to contact.
Click to expand...
Click to collapse
You are right the phone has it, the does not cable. That is my mistake. I knew one of them didn't just was too lazy to check.
Sent from my ADR6425LVW using xda premium

Extension cable for MHL Adapter?

I have a MHL Adapter and I get video just fine. Now I want to be able to sit on my couch while i use the adapter. Seems to me the simplest way would be to use a 15-20 foot Micro USB Male - Micro USB Female extension cable.
Does anyone have any experience with such a setup? Do you have a recommendation for such a cable?
TIA!!
Why micro USB? You can get a HDMI cable as long as you might want (Monoprice is particularly good). If it's not enough you can carry a HDMI signal over a single or (simpler to find) two CAT5 cables w/ RJ45 jacks for hundreds of feet.
I guess the thought was that if I have the Micro USB Extension, then it's one thin lightweight wire that has to travel across the floor.
If I did HDMI, I'd still have to be near power whereas with Micro USB, I could set the power adapter, and HDMI, and MHL Adapter all together and then have a thin and lightweight wire traveling across the floor.
But if it's not possible, (micro USB limitiation??) then HDMI it would have to be.
bean1975 said:
Why micro USB? You can get a HDMI cable as long as you might want (Monoprice is particularly good). If it's not enough you can carry a HDMI signal over a single or (simpler to find) two CAT5 cables w/ RJ45 jacks for hundreds of feet.
Click to expand...
Click to collapse
If the micro USB works it would be much cheaper than a comparable length hdmi cord.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I would test http://www.amazon.com/Extender-over-CAT5E-CAT6-connection/dp/B003L14ZTC this. It's hard to get cheaper than cat5e.
Just bought 10 feet on amazon! Lovely!
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I wanted to do exactly this - extend the cable but at the micro-USB end to avoid having the Micro-usb power supply line and the bulky MHL adaptor all where the phone is - much cleaner to just have a thin cable coming out of the phone and headed towards the TV.
I did get hold of a micro-USB extension cable (2m/6ft) but unfortunately it does not work. Directly plugging the phone into the MHL adaptor works perfectly, as soon as I insert the micro-USB extension it doesn't work. I need to have a closer look to check the pins are populated etc, but not sure why this would be an issue - don't think it can be signal strength and if all the pins are populated I don't see why the adaptor would care.????
Any thoughts?
Micro B USB extension not working
I, too have been trying to figure out why an extension cable doesn't work the way you think it might. Today, I tried cutting my 6 foot cable, first making sure I had the right power leads working. Then I went through all the possible combinations of connections to see if one would work. None do. I'm at a complete loss on this wondering what I should try next.
Thanks for info....similarly baffled but at least you have ruled out something!
Like the other guy said, get your x for of hdmi cable, then just plug your AC charger in where you are. Mhl might use additional connectors/pins/whatever vs micro USB. Or you can go totally wireless and use a Bluetooth mouse and keyboard.
Also I remember I had a charging issue with an extension. Sometimes one product works better than others. I can't charge my phone with my 20 dollar AC charger from best buy since the ICS leak. It's weird. Hdmi cables are pretty uniform, I would just extend that.
Sent from my SAMSUNG-SGH-I717 using XDA
Yes, that works, always has, but that's not the point. Would rather have just one long cable connected to the phone in front of the TV rather than three cables, the device and the phone in a kludge setup.
A partial answer
This allows connecting 6 feet away with a thin, flexible single cable..Also cheap, but shipping takes 15 days.
goo.gl/NzCik
Gavdroid said:
I did get hold of a micro-USB extension cable (2m/6ft) but unfortunately it does not work. Directly plugging the phone into the MHL adaptor works perfectly, as soon as I insert the micro-USB extension it doesn't work. I need to have a closer look to check the pins are populated etc, but not sure why this would be an issue - don't think it can be signal strength and if all the pins are populated I don't see why the adaptor would care.????
Any thoughts?
Click to expand...
Click to collapse
I took apart the two cables and the USB has four wires while the MHL cable has ten.
are the mhl wires easily extendable themselves by splicing? I'm thinking strip out a few usb cables and use the wires? Or just go purchase some extremely thin gauge wire (22 gauge) and make it yourself?
Micro B USB extension not working
The Micro B USB connector only has 5 connections, so there is no way you can connect 10 from the MHL cable to it, so something else is going on.
pinoutsguide.com/PortableDevices/micro_usb_pinout.shtml
amblix said:
are the mhl wires easily extendable themselves by splicing? I'm thinking strip out a few usb cables and use the wires? Or just go purchase some extremely thin gauge wire (22 gauge) and make it yourself?
Click to expand...
Click to collapse
I bought splices and thought about extending the cable. It's possible.
galaxy s3
I did wanted to do the same but the extension cable didn't work. I looked at the connecting points and felt that the micro usb from Mel adaptor is to bit longer than usual so I thought that may be the reason and I shorten it resulting damaging my Mel adaptor itself. Now I am going for allshare cast wireless hub. So everyone please don't try to cut the micro usb pin from your adaptor or u will better decide to for my option to for complete flexibility.
I want to do this EXACT same thing but slightly more extreme:
I want an MHL adapter with 10-25 feet of micro USB cable on the end so I can use it from anywhere in my living room.
Is there any such cable/adapter?
Why do all MHL adapters come with only a 5 inch cable??? It is maddening!
*bump* I am looking for this too.. but I have a reason slightly different.. I have an AppRadio in my car that I connect my phone to. The MHL cable end is rather bulky and does not fit into the opening of my otterbox that is on my phone... most microUSB wires fit into the opening just fine.. Taking my phone out of the case every time I am in the car is rather ridiculous so I bought the micro USB extension (bought a 6" one).. didn;t even register except to charge... So, and ideas would be greatly appreciated..
Teej53214 said:
*bump* I am looking for this too.. but I have a reason slightly different.. I have an AppRadio in my car that I connect my phone to. The MHL cable end is rather bulky and does not fit into the opening of my otterbox that is on my phone... most microUSB wires fit into the opening just fine.. Taking my phone out of the case every time I am in the car is rather ridiculous so I bought the micro USB extension (bought a 6" one).. didn;t even register except to charge... So, and ideas would be greatly appreciated..
Click to expand...
Click to collapse
Get a different MHL adapter. I use an adapter close to the one 7 posts up by hedaleth with my kenwood system in my truck.

Categories

Resources