Related
Hey guys maybe some budy can help, I can go into recovery and wipe data, cache etc.. but for some reason I can't run any rom that runs with sence they all get stuck at boot screen, the phone freezes,.. but I can intall miui through fastboot and everything runs ok, rom boots it doesn't get stuch what's happening, by the way I unrooted the phone the HTC way so I'm on 1.5..
You need to reinstall a different kernel through fastboot usb. If miui works then a sense rom won't until you flash compatible kernel.
Sent from my PG86100 using xda premium
Soulcraft said:
You need to reinstall a different kernel through fastboot usb. If miui works then a sense rom won't until you flash compatible kernel.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
gootcha, this makes lots of sence, thanks a ton ..now I'm a camper..
Similar problem being stuck in boot screen
I am on twrp shooter 2.0 with hboot 1.5 and I was running syncombelite when I tried to in stall the CM9 Alpha build and I was not having luck with loading the rom through recovery so I tried to use Flash image GUI. It loaded the image but after it was done it would not boot. I was stuck on the HTC boot screen. I tried to do a nandroid recovery and the same thing over and over. I figured maybe try a different rom so I tried a couple.. I used one and it actually made it past the boot screen and loaded the Beats audio logo then was stuck there for maybe 30 minutes before I tried a reboot and the same thing. Then I though I wll do a superwipe so I downloaded the synergy superwipe along with the
fresh-evo-3d-4.2.0 then it made it past the HTC boot and just went black for another 30 minutes. Now I am at a loss. Please help me...
Dale if your reading this I am the guy you helped a while back with the Toshiba thrive..maybe a month ago then I made a generous donation. I am happy to pay someone for their time. Please help..I need my phone. Thanks all.
elmatador2 said:
Hey guys maybe some budy can help, I can go into recovery and wipe data, cache etc.. but for some reason I can't run any rom that runs with sence they all get stuck at boot screen, the phone freezes,.. but I can intall miui through fastboot and everything runs ok, rom boots it doesn't get stuch what's happening, by the way I unrooted the phone the HTC way so I'm on 1.5..
Click to expand...
Click to collapse
your phone is doing a boot loop b/c your boot.img file is corrupt... the rom you are trying to install isnt installing properly and is causing this issue....what version of the rom are you trying to install?
---------- Post added at 02:02 AM ---------- Previous post was at 01:59 AM ----------
lonewolf5557 said:
I am on twrp shooter 2.0 with hboot 1.5 and I was running syncombelite when I tried to in stall the CM9 Alpha build and I was not having luck with loading the rom through recovery so I tried to use Flash image GUI. It loaded the image but after it was done it would not boot. I was stuck on the HTC boot screen. I tried to do a nandroid recovery and the same thing over and over. I figured maybe try a different rom so I tried a couple.. I used one and it actually made it past the boot screen and loaded the Beats audio logo then was stuck there for maybe 30 minutes before I tried a reboot and the same thing. Then I though I wll do a superwipe so I downloaded the synergy superwipe along with the
fresh-evo-3d-4.2.0 then it made it past the HTC boot and just went black for another 30 minutes. Now I am at a loss. Please help me...
Dale if your reading this I am the guy you helped a while back with the Toshiba thrive..maybe a month ago then I made a generous donation. I am happy to pay someone for their time. Please help..I need my phone. Thanks all.
Click to expand...
Click to collapse
dont be upset.... i got CM9 to work on my phone just b/c i wanted ICS but there is a graphical error in the set up and overall isnt worth it... just wait till they iron out some bugs i say abd then worry about ICS
How did you get CM9 to work...what recovery are you using and so on..?
lonewolf5557 said:
How did you get CM9 to work...what recovery are you using and so on..?
Click to expand...
Click to collapse
i use boot manager pro first off b/c i am a flashaholic... but if i recall correctly i had to use the boot.img from cm7 and migrate it over to the cm 9 set up and let it install from there...
im on hboot 1.5 with clockwork mod recovery... ver 4.0.1.4 any other ?'s just ask
lonewolf5557 said:
How did you get CM9 to work...what recovery are you using and so on..?
Click to expand...
Click to collapse
The recovery you use shouldn't matter. I have used CWM touch and non and TWRP all the same as long as it works for you. The easy way to flash CM9 is to use FlashImageGUI.apk before you wipe your current rom. Do not wipe ROM before using FlashGUI as it needs a OS to run on.
First flash recovery, whichever you want. If you don't already have one.
Put CM9 on sd
Flash boot.img from CM9.zip with Flash...GUI.apk (browse to CW9 on sd card)
Boot recovery, Flash rom from there.
(Flash..GUI should ask if you want to boot recovery after flash)
I used TWRP to flash CM9 tonight so I know it works 100%
I have tried that and I get stuck at HTC boot screen. I'm at a loss. I finally got virus eternity to flash using fastboot on my pc. I then tried ics (yes I know that's not what we were talking about) but I can't flash many different Roms lately. It's just weird. I have been rooting and flashing for a couple years now but I'm feeling more noobish lately than ever.
Sent from my PG86100 using xda premium
lonewolf5557 said:
I have tried that and I get stuck at HTC boot screen. I'm at a loss. I finally got virus eternity to flash using fastboot on my pc. I then tried ics (yes I know that's not what we were talking about) but I can't flash many different Roms lately. It's just weird. I have been rooting and flashing for a couple years now but I'm feeling more noobish lately than ever.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
i use a program called boot manager pro and it actually works... its for flashaholics... but the full build that i download works... i do have a prob booting into it at first.. it will hang at the HTC screen... but i pull the battery out and reboot and it goes right to the cyanogenmod boot up wondow and boots up... make sure you install the gapps before hand otherwise youll have a pain in the butt time trying to work around it but its do-able ......pm me if you need help ill be up for a bit....
Hello
first off let me say thanks in advance to anyone who can help me shed some light on this matter.
im trying to follow forum rules (i have used them before) and used the search function. so if i missed it im sorry. but here is as much info as i can give.
so i have a Tmobile samsung galaxy s vibrant. great phone love it. it had eclair on it. i used samsung kies to update it to froyo 2.2. that was the most i knew you could update a phone. until i found out you can do more. so i instantly wanted to flash to a the best ROM i could find info and was directed to the jelly bean Rom. i initially wanted to try the helly bean ROM (not sure if there is a difference) but im new to this and went with the rom i could find the most info on. found this guy on youtube. since i can post out side links yet. he calls him self "DJ eddie one" who was also recommended by the team passion forum. again im new to this so bare with me. so i tried to go through the process. I'm sure you all know that you cant just go from froyo to another rom. so i had to go back to stock. i re flashed the phone back to eclair via Odin by the same guy in his "return vibrant back to stock" video no problem. back everything up and made it back to stock. touch screen has response and i can unlock the phone and use it like normal. here is the deal now. after i went through the whole process of flashing it and going from ICS to slim bean and then to jelly bean. the home screen comes up and says "swipe here" or "touch here" or "start" or what ever. the screen does not respond. the volume buttons raise the volume and the power button turns the screen off and if i hold the power power button i get the "airplane mode"/"power off" options but cannot select anything. i thought i had done something wrong so i did the process over again. 3 times. even stopped at each rom change just to check it out as i processed through the process. no change. flash back to Eclair stock. and it works fine.
please help. i hate elcair. im sick of it. i want my free mobile hot spot back so i can listen to NPR news ap on my ipod touch in my car cuz i dont have a radio. and froyo blows too. if you're wondering why i can afford a snazzy phone and ipod touch but not a car stereo its because i drive an RX7. Cheers please help! i sure hope its something stupid (almost always is with me) i tend to over think things. plus i work on PCs and MACs for a living. i setup freaking networks for Allah sake. its frustrating to get stuck on a some phone software. AAAAHHHHHAAA.. *end rant*
thanks again.
hysterically yours
:cyclops:
Bunta
Well if your running hellybean. It sounds like it might just be a bad flash. Don't Odin back to stock.
1.go into recovery and format system.
2. Wipe cache.
3. Go into advanced settings and wipe dalvik cache.
4 go into mounts and storage and format /boot and format /system.
Reflaah the hellybean allinone(it depends which hellybean build were you flashing)
5.flash the hellybean add on and reeboot
Sent from my SGH-T959 using xda app-developers app
skinzy98 said:
Well if your running hellybean. It sounds like it might just be a bad flash. Don't Odin back to stock.
1.go into recovery and format system.
2. Wipe cache.
3. Go into advanced settings and wipe dalvik cache.
4 go into mounts and storage and format /boot and format /system.
Reflaah the hellybean allinone(it depends which hellybean build were you flashing)
5.flash the hellybean add on and reeboot
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
ok,
so i did all that and still no change. but im pretty sure i must have missed something when i initially flashed the phone. cuz i have no idea what the hellybean add on is you speak of.
Go to the Helly Bean thread in the developers forum. Go to page one and it should have a link to the addon package.
I had a glitch like yours one time where the touch screen acted like it was unplugged (for lack of better way to describe it). I popped battery out and rebooted and it was fine.
If not, Odin back to stock and follow my guide I posted in the Status 7 error thread. Page 3 I think.
Sent from my SGH-T959 using xda app-developers app
Try flashing CM10 instead of Helly Bean. Helly_Bean's installation can be somewhat tedious, but CM10 is just one zip file. Here is a link:http://forum.xda-developers.com/showthread.php?t=1775271
ali1276 said:
Try flashing CM10 instead of Helly Bean. Helly_Bean's installation can be somewhat tedious, but CM10 is just one zip file. Here is a link:http://forum.xda-developers.com/showthread.php?t=1775271
Click to expand...
Click to collapse
Well now the hellybean ROM got its all in one finally. But seems you may need to somehow fix the calibration of the screen.
Sent from my SGH-T959 using xda app-developers app
Toast6977 said:
Go to the Helly Bean thread in the developers forum. Go to page one and it should have a link to the addon package.
I had a glitch like yours one time where the touch screen acted like it was unplugged (for lack of better way to describe it). I popped battery out and rebooted and it was fine.
If not, Odin back to stock and follow my guide I posted in the Status 7 error thread. Page 3 I think.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Ok i just want to verify that i found the correct link you were talking about. there are so many in here with all them 4 million users.
Helly bean link. http://forum.xda-developers.com/showthread.php?t=1783064
and i cant seem to find that status 7 error thread you mentioned.
also one question. can i add the addon to the phones sd without having to flash back to stock?
ali1276 said:
Try flashing CM10 instead of Helly Bean. Helly_Bean's installation can be somewhat tedious, but CM10 is just one zip file. Here is a link:http://forum.xda-developers.com/showthread.php?t=1775271
Click to expand...
Click to collapse
Also thanks for your help. i may try this as well. i just want to get this thing working.
past namprefi
iKoolkid said:
Well now the hellybean ROM got its all in one finally. But seems you may need to somehow fix the calibration of the screen.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
and how would i do that? i mean what would cause the screen not to work? i was fine when eclair was on it and fine when foryo was on it. i go through the process of flashing it to ICS Passion then to Slim Bean and then to Jelly Bean and the screen just stops? i even stopped at eat Flash cuz i wanted to see what they looked like before made it to jelly bean. and each one the screen did work. i was thinking some sort of kernel file handles that or driver? correct me if im wrong.
rotary_bünta said:
Ok i just want to verify that i found the correct link you were talking about. there are so many in here with all them 4 million users.
Helly bean link. http://forum.xda-developers.com/showthread.php?t=1783064
Click to expand...
Click to collapse
Well, that link is wrong, that is for the captivate, not the vibrant. Make sure that you are in the vibrant development section before flashing a rom. Here is the vibrant hellybean link: http://forum.xda-developers.com/showthread.php?t=1811241
rotary_bünta said:
Ok i just want to verify that i found the correct link you were talking about. there are so many in here with all them 4 million users.
Helly bean link. http://forum.xda-developers.com/showthread.php?t=1783064
and i cant seem to find that status 7 error thread you mentioned.
also one question. can i add the addon to the phones sd without having to flash back to stock?
Also thanks for your help. i may try this as well. i just want to get this thing working.
Click to expand...
Click to collapse
http://rootaxbox.no-ip.org/derteufel/Helly_Bean/addons/
That is the link for the addon package. Choose the one for Helly Bean. Its up to you whether its the regular or inverted. Should be able to just flash away.
http://forum.xda-developers.com/showthread.php?p=30237539
The second link is for the install method I used. It may be overkill, but its the only way that would work for me, and it gave me a good clean install. It looks like a lot but it really doesnt take long..
I'm sorry guys bare with me. while i try to grasp this. im currently running the recovery software CWM-based recovery V6.0.1.1
since i cant get the ROM to work the screen can i mount the phone to USB drive from that recovery? or do i need to Odin back to stock and start over? so that i can mount back the USB and transfer the files i need.
ali1276 said:
Well, that link is wrong, that is for the captivate, not the vibrant. Make sure that you are in the vibrant development section before flashing a rom. Here is the vibrant hellybean link: http://forum.xda-developers.com/showthread.php?t=1811241
Click to expand...
Click to collapse
Thank you for clearing up that link for me.
In that thread stated are the files i need to flash the phone. in there is this link (http://rootaxbox.no-ip.org/derteufel/Helly_Bean/) which i have been to before. i guess i got confused as to what files i needed from the link because there are a few directories in there with lots of other files and i wasnt sure which i needed. Example; in that link if i click on kernel link it takes me to the next directory with numbers. ( i assume these are versions) then if i click on 113 it takes me to another dir of files. i can only assume i want the one that is lableled "Devil3_1.1.3_HB_vibrant_CFS_BLN_VC_20120807.zip"
im just confused as to what files i do need and what i dont need. im sorry to be such a pest.
Toast6977 said:
http://rootaxbox.no-ip.org/derteufel/Helly_Bean/addons/
That is the link for the addon package. Choose the one for Helly Bean. Its up to you whether its the regular or inverted. Should be able to just flash away.
http://forum.xda-developers.com/showthread.php?p=30237539
The second link is for the install method I used. It may be overkill, but its the only way that would work for me, and it gave me a good clean install. It looks like a lot but it really doesnt take long..
Click to expand...
Click to collapse
thanks toast;
whats the difference of the inverted as apposed to the regular? if i try one can i go back to try the other?
in reference to your second link;
i can flash back to sock with odin no problem.
the rest of the items needed on the list though
Gingerbread bootloader installed
-Bionix V fishman ROM (2.2 with Bali kernel, any 2.2 ROM may do.. YMMV)
-latest CM9 nightly (ICS)
-latest Helly Bean All In One and Add-on package.
i can get this from the same link?
The rest of the items you'll need to search for. GB boot loaders has a whole sticky devoted to it, how to do it, etc.
You can find the bionix ROM and CM9 nighty (ICS) in the android development forum (hit your back button once and you should see the development forum)
You'll be fine, just download everything you need, follow instructions, and you'll be set.
I've never used inverted apps, I assume it changes the look of them.
Toast6977 said:
The rest of the items you'll need to search for. GB boot loaders has a whole sticky devoted to it, how to do it, etc.
You can find the bionix ROM and CM9 nighty (ICS) in the android development forum (hit your back button once and you should see the development forum)
You'll be fine, just download everything you need, follow instructions, and you'll be set.
I've never used inverted apps, I assume it changes the look of them.
Click to expand...
Click to collapse
Alright toast,
just verify with me that i found the right stuff here so i don't go on some wild goose chase.
Bionix V fishman ROM (2.2 with Bali kernel, any 2.2 ROM may do.. YMMV)
fond here http://forum.xda-developers.com/showthread.php?t=1441976
latest CM9 nightly (ICS)
http://forum.xda-developers.com/showthread.php?t=1575170
the Helly bean and add on package was post already
this one i think http://rootaxbox.no-ip.org/derteufel/Helly_Bean/addons/
Yep.. with the Bionix ROM, I download and flashed the package via CWM, I didn't use the Odin image. Either way should work fine. Your last link is directly to the add-on package, here is the link to the ROM http://rootaxbox.no-ip.org/derteufel/Helly_Bean/rom/
I would download and use the 8/13 build of Helly Bean. If you have any questions feel free to PM me.
Just don't forget to flash to GB bootloader. You may have done that already, if not read about and follow the instructions here: http://forum.xda-developers.com/showthread.php?t=1117990
Have fun!
The inverted gapps change white to black and black to white, for example in gmail the screen will be black and red with white writing.
There are two benefits from this
1. They look cool IMO.
2. It uses less battery, white screens draw more current.
sent from my magic box to yours
Rotary, just received your pm. Seems like your still in the same boat. Touch screen not working.
Can you confirm your status now? It appeared that your touch screen will work while on eclair, but on no other ROM. Is that still your current situation?
Hey toast just looking over the thread, don't know if he still needs it but the hellybean zip he posted is a kernel zip not the ROM.
Sent from my SGH-T959 using xda premium
Update on this thread:
Last night via GTalk Rotary_Bunta and I:
1) Odined to stock, booted up checked touch screen. Worked good.
2) Flashed Bionix V, booted, touch screen working good.
3) Flashed GB bootloader, reboot checked touch screen.. working good.
4) Flashed CM9 Nightly... touch screen not working.
5) decided to proceed to see if phone just hated the ICS ROM, and flashed Helly Bean. Flashed x2, installed add-ons and touch screen doesn't work. Boots up and cannot slide ring to unlock screen.
Toast6977 said:
Update on this thread:
Last night via GTalk Rotary_Bunta and I:
1) Odined to stock, booted up checked touch screen. Worked good.
2) Flashed Bionix V, booted, touch screen working good.
3) Flashed GB bootloader, reboot checked touch screen.. working good.
4) Flashed CM9 Nightly... touch screen not working.
5) decided to proceed to see if phone just hated the ICS ROM, and flashed Helly Bean. Flashed x2, installed add-ons and touch screen doesn't work. Boots up and cannot slide ring to unlock screen.
Click to expand...
Click to collapse
Flash CM7 and then tell me results of that.
Sent from my SGH-T959 using xda app-developers app
Update: He flashed CM7 = no touch screen response.
Tried different kernels. Power button won't even wake screen. Flash back to 2.1 or 2.2 and all is well. Touch screen and buttons work just fine.
Flashed Glitch kernel w/ cm7 to see if there were any changes at all, made no difference.
I've been using the euphoria ROM for a few months now with no incident. The phone has never given me problems of any sort, well the bad GPS, but that's a known issue.
Anyhow the other night went to bed without charging my phone. In the middle of the night I woke up and realized it was not charging, so I connected the charger and went back to bed. However by that time my phone has fully discharged so I got the battery graphics.
In the morning when I tried to turn the phone on I got the spiral boot icon and then a black screen.
I've tried to get the recovery mode but to no avail. I know the phone is somewhat working because i get the spiral boot animation and the charging graphics but i cannot get the phone to turn on. Did anybody know a fix, any advice will help.
Thanks in advance
=X=
I like your name, X (thats my nickname around here )
Anyways, when you plug it in, does the charging stuff come up? (if yes, how much battery do you suppose its at?)
Have you tried download mode? (take out battery, plug in USB, put battery back in while holding... I think its vol up and down + power, after it says VIBRANT let power go)
I'm not sure if your phone even goes that far.
Likewise I like your nickname.
My battery is close to 100%. I tried the sequence you mentioned with no luck. I get the same behavior, I get the spiral boot graphics and the phone good black. With the cable connected I get the charging battery graphics. The graphics does work properly. When the battery gets to 100% it vibrates too
=X=
Sent from my SGH-T889 using Tapatalk 2
=X= said:
Likewise I like your nickname.
My battery is close to 100%. I tried the sequence you mentioned with no luck. I get the same behavior, I get the spiral boot graphics and the phone good black. With the cable connected I get the charging battery graphics. The graphics does work properly. When the battery gets to 100% it vibrates too
=X=
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Just curious, what ROM/kernel were you on?
Also, by the spiral graphics are you talking about the bootanimation?
Are you on Froyo bootloaders or Gingerbread bootloaders?(if you don't know and have never messed with bootloaders its froyo)
I'm running Chimera v2.2. It's an ICS ROM made by team passion. The kernel is 3.1.10
Yes by the spiral I mean the boot animation. You only ever see it from a cold boot.
I don't know what boot loader I'm running.I think team passion is using the same one as Cyanogen. It's that common boot loader with a GUI.
=X= said:
I'm running Chimera v2.2. It's an ICS ROM made by team passion. The kernel is 3.1.10
Yes by the spiral I mean the boot animation. You only ever see it from a cold boot.
I don't know what boot loader I'm running.I think team passion is using the same one as Cyanogen. It's that common boot loader with a GUI.
Click to expand...
Click to collapse
Well the bootloader doesn't really use a GUI. You might be talking about the recovery, the one with "reboot system" and "install zip from sdcard"
What i was referring to was when i was installing the Chimera ROM I hadn't use a GUI app to install the ROM l. I thought the instructions mentioned it was installing a bootloader, but I could have miss read it.
Okay, X, I tried the steps again. I realize I did not follow all of your steps so I repeated them again. This time in tried the three finger salute with the USB plugged in and it worked. I get the recovery menu by choosing reboot it boots up properly.
However when I shutdown and turn on the phone I'm back to square one
=X=
=X= said:
What i was referring to was when i was installing the Chimera ROM I hadn't use a GUI app to install the ROM l. I thought the instructions mentioned it was installing a bootloader, but I could have miss read it.
Okay, X, I tried the steps again. I realize I did not follow all of your steps so I repeated them again. This time in tried the three finger salute with the USB plugged in and it worked. I get the recovery menu by choosing reboot it boots up properly.
However when I shutdown and turn on the phone I'm back to square one
=X=
Click to expand...
Click to collapse
Wait.. so when you tried my method your phone actually booted all the way up??
I was planning for you to go to Download mode and ODIN, but err..
Next time you go to recovery
*make sure you have a ROM in your sd card that is safe to flash, even if its chimera*
wipe data/factory reset
mount/storage > format system
flash your ROM in sd, then reboot
Yeah I wasn't expecting it to work. But now that that worked I am a bit nervous about installing a ROM incase the bootloader is corrupted.
Sent from my SGH-T889 using Tapatalk 2
=X= said:
Yeah I wasn't expecting it to work. But now that that worked I am a bit nervous about installing a ROM incase the bootloader is corrupted.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
:l, pretty sure you're confused, and the bootloader is not corrupted. If bootloader was corrupted, your phone would never start without a JTAG again.
Anyways, get into recovery, and flash chimera or any other safe rom you have, and see if it boots up. I think it may be something with Chimera.
xriderx66 said:
:l, pretty sure you're confused
Click to expand...
Click to collapse
Wouldn't be the first time
I'll reinstall the ROM thx
Sent from my SGH-T889 using Tapatalk 2
Just a suggestion, don't re-install Chimera... Or at the very least, don't use it as a daily driver. I stand by that for two reasons. For one, Chimera may have been the reason you got into this problem in the first place. The second reason being... Well... Er... Chimera v2.2 isn't the best ROM out there, and it's kinda dated... I'm sure there's others that would agree. I mean there's plenty of other ICS ROMs available that run much better. Jellybean ROMs have also reached a point of stability, so there's some good Jellybean flavored options to choose from as well. Personally, I'm running ParanoidAndroid (JB) and I'm lovin' it.
Just my two cents... But if you like Chimera, then stick with it. It's definitely a usable ROM.
Sent from my SGH-T959
I'm not dead set on Chimera, it was the best ROM at the time.
I'll give the ROM you mentioned a try,thanks
=X= said:
I'm not dead set on Chimera, it was the best ROM at the time.
I'll give the ROM you mentioned a try,thanks
Click to expand...
Click to collapse
Just curious, is your phone working fine now?
=X= said:
I'm not dead set on Chimera, it was the best ROM at the time.
I'll give the ROM you mentioned a try,thanks
Click to expand...
Click to collapse
Awesome. If you're like me -- a big fan of customization -- then I'm sure you'll love ParanoidAndroid (LINK).
Otherwise there are ten other JB ROMs to choose from, and about seventeen different ICS ROMs to choose from (excluding Chimera v2.2). Links to said ROMs can be found in the "ROM" section of the Vibrant Bible thread (LINK).
EDIT: Sorry if I kinda' veered this thread off topic... Have you gotten you're phone running fine now =X=?
xriderx66 said:
Just curious, is your phone working fine now?
Click to expand...
Click to collapse
No it did not work. I thought all was good. It seemed to work when I performed a soft shutdown. Then I tried a cold boot: shutdown the phone, pulled the battery and on startup the phone would not work.
N00B_IN_N33D said:
Awesome. If you're like me -- a big fan of customization -- then I'm sure you'll love ParanoidAndroid (LINK).
Otherwise there are ten other JB ROMs to choose from, and about seventeen different ICS ROMs to choose from (excluding Chimera v2.2). Links to said ROMs can be found in the "ROM" section of the Vibrant Bible thread (LINK).
EDIT: Sorry if I kinda' veered this thread off topic... Have you gotten you're phone running fine now =X=?
Click to expand...
Click to collapse
Awesome thanks for the links. It sounds like paranoid android will for my likes. I'm going to update my phone with that rom.
I'm still having problems with my phone however.
So I've upgraded my phone to the latest ParanoidAndroid but I'm still getting the same problem.
All works fine once it's running but I have to use the USB and three finger boot to get the phone to start, once I'm in the recovery mode selecting her restart launches the OS .
However trying to start the phone from a cold boot does not seem to work...any ideas anyone?
Sent from my SGH-T889 using Tapatalk 2
May be you need a new battery how long you have the current battery.
Sent from my SGH-T959 using xda app-developers app
It's probably not bootloader-related, but for what it's worth, froyo bootloaders don't work well with ICS Roms.
Chances are it's just a ROM issue, but if that fails just ODIN to default, re-root, install GB bootloaders, etc. (Basically, start over)
I have run many ICS and JB ROMs without issue running froyo boots. It was mostly GB ROMs that had issue and needs GB boots. I don't suspect that to be the issue however, it won't hurt to try it.
I am Jack's smirking revenge.
There were two main roms I wanted to try after I finally S-OFF'd my phone yesterday. Hatka Supreme 1.1.0 and Carbon. Neither of these worked and I'm glad that I backed up my S-OFF rooted stock rom. Hatka Supreme, the guy states its best to use Beast Mode kernal with the rom, which I flashed after I installed the room, and it just randomly reboots at the splash screen/a few seconds after getting into Android, so I restored my stock and everything worked fine. Next, I tried Carbon, and it just sat there at the carbon flash screen for like 20 minutes, so again, I had to restore to stock. Is there something I'm doing wrong? Is there a difference between Original Android Development and Android Development? Should I be looking at the original or what? I'm really lost, I'm going to try another rom, hopefully someone replies to this before it finishes downloading. Thanks for the help.
EDIT: I'd rather just sit and wait to see if someone replies before I waste time downloading another rom...any help would be appreciated.
rejectedjs said:
There were two main roms I wanted to try after I finally S-OFF'd my phone yesterday. Hatka Supreme 1.1.0 and Carbon. Neither of these worked and I'm glad that I backed up my S-OFF rooted stock rom. Hatka Supreme, the guy states its best to use Beast Mode kernal with the rom, which I flashed after I installed the room, and it just randomly reboots at the splash screen/a few seconds after getting into Android, so I restored my stock and everything worked fine. Next, I tried Carbon, and it just sat there at the carbon flash screen for like 20 minutes, so again, I had to restore to stock. Is there something I'm doing wrong? Is there a difference between Original Android Development and Android Development? Should I be looking at the original or what? I'm really lost, I'm going to try another rom, hopefully someone replies to this before it finishes downloading. Thanks for the help.
EDIT: I'd rather just sit and wait to see if someone replies before I waste time downloading another rom...any help would be appreciated.
Click to expand...
Click to collapse
Did you do a full wipe? System, factory reset, dalvik?
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
Did you do a full wipe? System, factory reset, dalvik?
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
It's probably your recoverys fault. On my last DNA I had nothing but failures. Once it took at least 30 times to get a Rom installed. Never solved the issue on that phone. I just soffed my new DNA yesterday, installed the newest cwm touch and flashed 4 different roms with no problem. Try re-flashing cwm touch.
pio_masaki said:
Did you do a full wipe? System, factory reset, dalvik?
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
Yes, still the same thing, I'm not saying I didn't do that the first time though, that's like the basics of installing a rom.
str8upx said:
It's probably your recoverys fault. On my last DNA I had nothing but failures. Once it took at least 30 times to get a Rom installed. Never solved the issue on that phone. I just soffed my new DNA yesterday, installed the newest cwm touch and flashed 4 different roms with no problem. Try re-flashing cwm touch.
Click to expand...
Click to collapse
Do you think its TWRP's fault? After I found out there was no way to mount USB storage in TWRP I wanted to switch to CWM, but sadly I don't know how.
rejectedjs said:
Yes, still the same thing, I'm not saying I didn't do that the first time though, that's like the basics of installing a rom.
Do you think its TWRP's fault? After I found out there was no way to mount USB storage in TWRP I wanted to switch to CWM, but sadly I don't know how.
Click to expand...
Click to collapse
You could use the goomanager from the play store or use fastbook flash recovery cwm.img
Edit: for the touch version of cwm fastboot is required.
str8upx said:
You could use the goomanager from the play store or use fastbook flash recovery cwm.img
Edit: for the touch version of cwm fastboot is required.
Click to expand...
Click to collapse
I would rather use goomanager, because it seems easier, but the only thing it seems to be able to download is the twrp image. How would I set it to cwm?
I have canvas 2 running on suvi6 Jupiter rom i have some prob with this when i reboot some icon on home screen will disappear, i found that those apps which r installed on ext sd card its icon will disappear from home screen, but apps working in apps list, only icon from home screen disappeared.
Other problem is that while incoming a call i cannot see full picture of caller becoz half screen is black and half picture can be seen.
Please help me
Sent from my Micromax A110 using xda app-developers app
rejectedjs said:
I would rather use goomanager, because it seems easier, but the only thing it seems to be able to download is the twrp image. How would I set it to cwm?
Click to expand...
Click to collapse
Sorry I was mistaken, goomanager installs twrp not cwm.
Fastboot is easy to use, I'm at work so I can't to a step by step til I get home later. You should be able figure it out but if not I will help when I get home.
str8upx said:
Sorry I was mistaken, goomanager installs twrp not cwm.
Fastboot is easy to use, I'm at work so I can't to a step by step til I get home later. You should be able figure it out but if not I will help when I get home.
Click to expand...
Click to collapse
I don't know if you knew this already but I s-offed using moonshine, is that a problem? I installed cwm and tried installing hatka again and it did the same thing, restart like every three seconds into android. I don't know what to do anymore.
kundan.lohar said:
I have canvas 2 running on suvi6 Jupiter rom i have some prob with this when i reboot some icon on home screen will disappear, i found that those apps which r installed on ext sd card its icon will disappear from home screen, but apps working in apps list, only icon from home screen disappeared.
Other problem is that while incoming a call i cannot see full picture of caller becoz half screen is black and half picture can be seen.
Please help me
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
Pretty sure you're in the wrong forum.
From my S-Off BadSeed DNA
rejectedjs said:
There were two main roms I wanted to try after I finally S-OFF'd my phone yesterday. Hatka Supreme 1.1.0 and Carbon. Neither of these worked and I'm glad that I backed up my S-OFF rooted stock rom. Hatka Supreme, the guy states its best to use Beast Mode kernal with the rom, which I flashed after I installed the room, and it just randomly reboots at the splash screen/a few seconds after getting into Android, so I restored my stock and everything worked fine. Next, I tried Carbon, and it just sat there at the carbon flash screen for like 20 minutes, so again, I had to restore to stock. Is there something I'm doing wrong? Is there a difference between Original Android Development and Android Development? Should I be looking at the original or what? I'm really lost, I'm going to try another rom, hopefully someone replies to this before it finishes downloading. Thanks for the help.
EDIT: I'd rather just sit and wait to see if someone replies before I waste time downloading another rom...any help would be appreciated.
Click to expand...
Click to collapse
I'm no expert, but when u flashed hatka, did u reboot into the system before flashing beast mode kernel? Flashing a kernel in the same recovery session is a no no. Also, beast mode is not compatible with carbon, fyi.
Sent from my HTC6435LVW using Tapatalk 4 Beta
kelvinnotcalvin said:
I'm no expert, but when u flashed hatka, did u reboot into the system before flashing beast mode kernel? Flashing a kernel in the same recovery session is a no no. Also, beast mode is not compatible with carbon, fyi.
Sent from my HTC6435LVW using Tapatalk 4 Beta
Click to expand...
Click to collapse
I did that the first time, and thats when I started experiencing it, so I figured that was the problem. So I restored to stock, and then just tried flashing the rom and booting, still same thing, rebooting every 5 seconds. Sometimes I'm able to get into settings, scroll up and down a few times, and then it reboots.
EDIT: If I remember correctly, I didn't even flash beast mode kernel after I flashed carbon.
rejectedjs said:
EDIT: If I remember correctly, I didn't even flash beast mode kernel after I flashed carbon.
Click to expand...
Click to collapse
If you had you never would have seen the carbon boot animation I don't think, just a white scrambled screen.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
If you had you never would have seen the carbon boot animation I don't think, just a white scrambled screen.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
What exactly is the problem I'm experiencing here? x.x Of all roms I REALLY wanted to try Hatka, why me...
rejectedjs said:
What exactly is the problem I'm experiencing here? x.x Of all roms I REALLY wanted to try Hatka, why me...
Click to expand...
Click to collapse
I've had the same sort of thing happen to me when we first started working with CM. I had to lock up and run the RUU then unlock again, started flashing normally again after that.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
I've had the same sort of thing happen to me when we first started working with CM. I had to lock up and run the RUU then unlock again, started flashing normally again after that.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
You mean you want me to go back to pure stock and soff all over again?
rejectedjs said:
You mean you want me to go back to pure stock and soff all over again?
Click to expand...
Click to collapse
I don't want you to do anything, in was just saying what I did to correct it when it happened to me.
And no, I didn't day s-on, I said relocked, the RUU won't run on an unlocked device. Locked and son are different.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
I don't want you to do anything, in was just saying what I did to correct it when it happened to me.
And no, I didn't day s-on, I said relocked, the RUU won't run on an unlocked device. Locked and son are different.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
I've never had so many problems just trying to flash a Rom before, this is crazy...I'm seriously at a loss about what to do other than stay on rooted stock
bump?..I really want some help..
Did you figure it out? I'd do what pio said. He's kind of amazing. He's a very smart man who most likely knows what he's doing
Sent from my HTC6435LVW using xda app-developers app
I'm using Beanstalk on my phone and I get a lot of random reboots. Mostly when I'm unlocking the phone. I press the button and the soft keys light up the phone freezes and 5 or so seconds later it reboots. It also happens during calls sometimes when I take the phone away from my face and the screen turns on and sometimes when I'm listening to music. It's also happened a few times while I was using the phone. I don't restore any data(unless you count the apps that automatically reinstall from the playstore when I boot the phone, and a few apks from blackmart) I've tried reflashing but that was only a temporary fix. I always have problems with roms being really buggy even though I always to clean flashes.
Can someone help me to fix this? I use this device to play music over a sound system for crowds of people so I really need this bug fixed. (preferably without reflashing but I will if need be.)
maybe try this
SockmanTGR said:
I'm using Beanstalk on my phone and I get a lot of random reboots. Mostly when I'm unlocking the phone. I press the button and the soft keys light up the phone freezes and 5 or so seconds later it reboots. It also happens during calls sometimes when I take the phone away from my face and the screen turns on and sometimes when I'm listening to music. It's also happened a few times while I was using the phone. I don't restore any data(unless you count the apps that automatically reinstall from the playstore when I boot the phone, and a few apks from blackmart) I've tried reflashing but that was only a temporary fix. I always have problems with roms being really buggy even though I always to clean flashes.
Can someone help me to fix this? I use this device to play music over a sound system for crowds of people so I really need this bug fixed. (preferably without reflashing but I will if need be.)
Click to expand...
Click to collapse
Try Doing a Full Wipe of Your Android System.
Use [TWRP_Recovery_2.7.0.0][Unofficial][quincyatt] Go into factory Wipe > Then Click Advance > Then Wipe Everything but your SD card .
Flash Beanstalk > then Wipe Cache and dalvik > then install PA Gapps > then Wipe Cache & Dalvik again then reboot, Also try installing > Polluti0n's Rom Patch!!
It worked wonders for me , Use Uber kernal & Set Govener to Whetle.
Happy Flashing , Any more Questions Please ask
Joshua Mr PC Repair said:
Try Doing a Full Wipe of Your Android System.
Use [TWRP_Recovery_2.7.0.0][Unofficial][quincyatt] Go into factory Wipe > Then Click Advance > Then Wipe Everything but your SD card .
Flash Beanstalk > then Wipe Cache and dalvik > then install PA Gapps > then Wipe Cache & Dalvik again then reboot, Also try installing > Polluti0n's Rom Patch!!
It worked wonders for me , Use Uber kernal & Set Govener to Whetle.
Happy Flashing , Any more Questions Please ask
Click to expand...
Click to collapse
I flashed twrp with odin and now I can't flash most roms. (I managed to get an old cyanogenmod 10.1 to work). Not even my backup of my stock will work. I tried switching back to cwm but I get the same problems. sometimes it say they are invalid sometimes it say they aren't for my device(These are all roms I've flashed before). I've even tried new roms. Please Help Quickly!
SockmanTGR said:
I flashed twrp with odin and now I can't flash most roms. (I managed to get an old cyanogenmod 10.1 to work). Not even my backup of my stock will work. I tried switching back to cwm but I get the same problems. sometimes it say they are invalid sometimes it say they aren't for my device(These are all roms I've flashed before). I've even tried new roms. Please Help Quickly!
Click to expand...
Click to collapse
I just Tried it again .
Had No Issues ,
Can You Try with a new SD Card .
Then Do The Wipe
also load TWRP Via Recovery , If You have CWM Go to Install Click > TWRP .
SockmanTGR said:
I flashed twrp with odin and now I can't flash most roms. (I managed to get an old cyanogenmod 10.1 to work). Not even my backup of my stock will work. I tried switching back to cwm but I get the same problems. sometimes it say they are invalid sometimes it say they aren't for my device(These are all roms I've flashed before). I've even tried new roms. Please Help Quickly!
Click to expand...
Click to collapse
Have you vot the right TWRP? One wont work on KK
If you are getting a status 7, your recovery needs updating.
Are you formatting your system?
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Put on SD Card and install
captemo said:
Have you vot the right TWRP? One wont work on KK
If you are getting a status 7, your recovery needs updating.
Are you formatting your system?
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
This is the one that works for KK
[TWRP_Recovery_2.7.0.0][Unofficial][quincyatt]
Alright i managed to fix the damage but i'm back to beanstalk with cwm. (i had to go through cyanogenmod and put it on using rom manager)
I'm still getting the bugs though(as far as I can tell. I've had one reboot already)
CWM is now functioning normally.
You mentioned a kernel? How would I go about that? I'm still relatively new to rooted devices. So please provide a detailed step-by-step information if you can.
SockmanTGR said:
Alright i managed to fix the damage but i'm back to beanstalk with cwm. (i had to go through cyanogenmod and put it on using rom manager)
I'm still getting the bugs though(as far as I can tell. I've had one reboot already)
CWM is now functioning normally.
You mentioned a kernel? How would I go about that? I'm still relatively new to rooted devices.
Click to expand...
Click to collapse
you can go to the Original Development thread and find the thread for the Uber kernel. pay attention cause one is for JB and the other for KK. whichever Beanstalk your running get the right kernel.
you will flash it just like you flash a rom, or more like you would flash the gapps. you don't have to start over flashing rom again, you are just flashing the kernel to it.
the reboots sound a bit off to me as if you are flashing completely clean, KK is very stable for me and most others. maybe try flashing rom twice as you can get 2 different reactions on 2 different flashes.
flash rom
flash rom again
gapps
boot and wait
reboot
go back and flash your kernel
make sure you get all your wipes in middle of all this.
25625292 7345
captemo said:
you can go to the Original Development thread and find the thread for the Uber kernel. pay attention cause one is for JB and the other for KK. whichever Beanstalk your running get the right kernel.
you will flash it just like you flash a rom, or more like you would flash the gapps. you don't have to start over flashing rom again, you are just flashing the kernel to it.
the reboots sound a bit off to me as if you are flashing completely clean, KK is very stable for me and most others. maybe try flashing rom twice as you can get 2 different reactions on 2 different flashes.
flash rom
flash rom again
gapps
boot and wait
reboot
go back and flash your kernel
make sure you get all your wipes in middle of all this.
Click to expand...
Click to collapse
I followed your instruction with the kernel(http://forum.xda-developers.com/showthread.php?t=2326786) Had to download it directly to my phone. It didn't like it from my laptop.
Successfully installed.
I'll let you guys know if my problem continues,
SockmanTGR said:
I flashed twrp with odin and now I can't flash most roms. (I managed to get an old cyanogenmod 10.1 to work). Not even my backup of my stock will work. I tried switching back to cwm but I get the same problems. sometimes it say they are invalid sometimes it say they aren't for my device(These are all roms I've flashed before). I've even tried new roms. Please Help Quickly!
Click to expand...
Click to collapse
You are not using twrp from the thread linked. Also do NOT use the twrp app for the recovery as my recovery is not found there. It can only be found in my thread. Flash it in recovery & you're good to go.
SockmanTGR said:
I'm using Beanstalk on my phone and I get a lot of random reboots. Mostly when I'm unlocking the phone. I press the button and the soft keys light up the phone freezes and 5 or so seconds later it reboots. It also happens during calls sometimes when I take the phone away from my face and the screen turns on and sometimes when I'm listening to music. It's also happened a few times while I was using the phone. I don't restore any data(unless you count the apps that automatically reinstall from the playstore when I boot the phone, and a few apks from blackmart) I've tried reflashing but that was only a temporary fix. I always have problems with roms being really buggy even though I always to clean flashes.
Can someone help me to fix this? I use this device to play music over a sound system for crowds of people so I really need this bug fixed. (preferably without reflashing but I will if need be.)
Click to expand...
Click to collapse
i had the same problem and went to liquid smooth and is stable
jemsTV said:
i had the same problem and went to liquid smooth and is stable
Click to expand...
Click to collapse
If you like beanstalk try this fix. New problem I'm getting a lot of graphical bugs now. So far just in browser but everything flickers including system ui
SockmanTGR said:
If you like beanstalk try this fix. New problem I'm getting a lot of graphical bugs now. So far just in browser but everything flickers including system ui
Click to expand...
Click to collapse
If you are using Beanstalk you should probably read the BeanStalk thread, both of these common problems (screen flicker and failure to wake) are solved with a Aroma package made by p0llution. You flash it in recovery and all is good. Link is in 1st post, right next to ROM link. You can also switch kernels and boot animations with same package.
delawaredrew said:
If you are using Beanstalk you should probably read the BeanStalk thread, both of these common problems (screen flicker and failure to wake) are solved with a Aroma package made by p0llution. You flash it in recovery and all is good. Link is in 1st post, right next to ROM link. You can also switch kernels and boot animations with same package.
Click to expand...
Click to collapse
Would I need to reflash the ROM to ally another kernel?
SockmanTGR said:
Would I need to reflash the ROM to ally another kernel?
Click to expand...
Click to collapse
As instructed, you need to do some reading. In my last post I gave you instructions on how to add kernel.
Help yourself first, then others will be more than happy to assist.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
SockmanTGR said:
Would I need to reflash the ROM to ally another kernel?
Click to expand...
Click to collapse
I'll give you some slack 'cause I am still close enough to my first flash that I remember being full of questions, but at least read the OP and most recent pages in your ROM thread. You should skim through it all ideally but some are 100+ pages so....
Kernel switching in general does not require any ROM action, there are likely cases that it might be useful but I've never had a problem. You will need to ensure that the kernel is matched to your ROM; KitKat or Jellybean or whatever. I usually do it as I flash a ROM but I have gone back and installed a kernel on a running ROM plenty of times; Uber for instance was released after I had BeanStalk up and running, it is a good kernel so I switched to that.
As a more general point the Note is hard to brick, as long as you don't somehow mess up the recovery (CWM or TWRP) you are just a quick restore away from back to normal. Use the backup function in your recovery, it is your friend and savior. Keep a copy of the back-up on your PC (or Mac) and you will usually be golden.
SockmanTGR said:
Would I need to reflash the ROM to ally another kernel?
Click to expand...
Click to collapse
If you are on BS Rom you should know that all you need to to know is on the OP post-the rom and the patch. The latter contains about 5 different kernels which you can switch betw. to your hearts content. The patch is n00bie proof to make your switches. Really hit BS OP.
SockmanTGR said:
Would I need to reflash the ROM to ally another kernel?
Click to expand...
Click to collapse
Just like all the other kind gents adv'd, it's all in patch's OP:
http://forum.xda-developers.com/showthread.php?t=2535857
Including polluti0n's patches thread:
http://forum.xda-developers.com/showpost.php?p=50529734&postcount=854
He uses aroma installer, so when you flash it (personally, I did it with CWM) you don't need to wipe cache/dalvik nor wipe phone, he mentons this on patch's thread while answering questions I believe. The screenshots show you some differences between the kernels he has available, either CM, Uber or PAC.
Personally, I'm using PAC since for me it seemed to work better with the Xposed's Netflix workaround, whereas it didn't work that well with Uber.
Also, the patch provides fixes, for camera, screen flicker and such.. Give it a try, and you'll definitely love your phone more!